FCC ID: 2ADLJ-HD65PLUS Mobile Phone

found to comply with the limits for a Class B

-Reorient or relocate the receiving antenna. or health. Use only the supplied or an approved 15.19 Labeling requirements. digital device, pursuant to part 15 of the FCC

-Increase the separation between the This device complies with part 15 of the FCC Rules. equipment and receiver. Rules. Operation is subject to the following two conditions: (1) This device may not cause These limits are designed to provide reasonable

-Connect the equipment into an outlet on a protection against harmful interference in a circuit different from that to which the receiver harmful interference, and (2) this device must residential installation. This equipment is connected. accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. generates uses and can radiate radio frequency

-Consult the dealer or an experienced radio/TV energy and, if not installed and used in technician for help. accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that Absorption Rate (SAR) information:

This device meets the government's interference will not occur in a particular requirements for exposure to radio waves. The installation. If this equipment does cause guidelines are based on standards that were harmful interference to radio or television developed by independent scientific reception, which can be determined by turning organizations through periodic and thorough the equipment off and on, the user is evaluation of scientific studies. The standards user's body and the back of the device. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these 15.105 Information to the user. Note: This equipment has been tested and encouraged to try to correct the interference include a substantial safety margin designed to requirements may not comply with FCC RF by one or more of the following measures:

assure the safety of all persons regardless of age exposure requirements, and should be avoided. antenna. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device was tested for typical body-worn operations with the back of the device kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a appropriate separation distance between the The ANSI Standard presents performance requirements for acceptable interoperability of hearing with wireless communications devices. When these parameters are met, a hearing aid operates acceptably in close proximity to a wireless communications device. WD RF audio Interference level categories in logarithmic units Emission categories

<960MHz Limits for E-field

>960MHz Limits for E-field emissions emissions 50 to 55 dB (V/m) 40 to 45 dB (V/m) Category Category T1 Category T2 Category T3 Category T4 Telephone parameters WD signal quality

[(signal + noise) to noise ratio in decibels]

0 dB to 10 dB 10 dB to 20 dB 20 dB to 30 dB

> 30 dB M1 M2 M3 M4 45 to 50 dB (V/m) 35 to 40 dB (V/m) HAC Rate Category: T3 40 to 45 dB (V/m) 30 to 35 dB (V/m)

< 40 dB (V/m)

< 30 dB (V/m) HAC Rate Category: M4 FCC Hearing Aid Compatibility (HAC) Regulations for Wireless Devices The U.S. Federal Communications Commission (FCC) has established requirements for digital wireless mobile devices to be compatible with hearing aids and other assistive hearing devices. When individuals employing some assistive hearing devices (hearing aids and cochlear implants) use wireless mobile devices, they may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and mobile devices also vary in the amount of interference they generate. The wireless telephone industry has developed a rating system for wireless mobile devices to assist hearing device users find mobile devices that may be compatible with their hearing devices. Not all mobile devices have been rated. Mobile devices that are rated have the rating on their box or a label located on the box. The ratings are not guarantees. Results will vary depending on the user's hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated mobile device successfully. Trying out the mobile device with your hearing device is the best way to evaluate it for your personal needs.

Xwireless LLC Section 2.911(d)(5)(i) Certification Equipment Type Company name: Xwireless LLC Address: 11565 Old Georgetown Road, Rockville, MD, USA Product Name: Mobile Phone FCC ID: 2ADLJ-HD65PLUS Model(s): HD65Plus 2.911(d)(5)(i) Equipment Type We, [Xwireless LLC ] (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name:

Paul Greene Date: 2023-08-04 Title and Company name: CEO NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Xwireless LLC Section 2.911(d)(5)(ii) Certification Applicant (Covered List ) Company name: Xwireless LLC Address: 11565 Old Georgetown Road, Rockville, MD, USA Product Name: Mobile Phone FCC ID: 2ADLJ-HD65PLUS Model(s): HD65Plus 2.911(d)(5)(ii) Applicant filing We, [Xwireless LLC ] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Paul Greene Date: 2023-08-04 Title and Company name: CEO NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

Xwireless LLC Section 2.911(d)(7) USA Agent for Service of Process Company name: Xwireless LLC Address: 11565 Old Georgetown Road, Rockville, MD, USA Product Name: Mobile Phone FCC ID: 2ADLJ-HD65PLUS Model(s): HD65Plus 2.911(d)(7) USA Designated Agent for Service of Process We, [Xwireless LLC ] (the applicant) designate [Xwireless LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Xwireless LLC Address: 11565 Old Georgetown Road, Rockville, MD, USA Applicant Company name: Xwireless LLC Address: 11565 Old Georgetown Road, Rockville, MD, USA FRN: 0024077745 Contact Name: Paul Greene Telephone No:

Email: paulgreene@prepaidwirelessgroup.com

(301) 412-4412 FCC Grantee Code: 2ADLJ Contact Name: Paul Greene Telephone No:

(301) 412-4412 Email: paulgreene@prepaidwirelessgroup.com Signature:

Title: CEO Date: 2023-08-04 Signature:

Title: CEO Date: 2023-08-04 2.911 (d)(7)USA Agent v1.2 Xwireless LLC NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-t o-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.2

Letter of Authorization Company:

Xwireless LLC Address: 11565 Old Georgetown Road, Rockville, MD, USA Product Name: Mobile Phone Model Number: HD65Plus FCC Identifier: 2ADLJ-HD65PLUS We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Paul Greene Date: 2023-08-04 Title: CEO

Xwireless LLC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject; Request for Long Term Confidentiality FCC ID: 2ADLJ-HD65PLUS Date: 2023-08-04 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description Tune-up Procedurer software security requirement It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Paul Greene Title: CEO

Xwireless LLC FCC Software Configuration Control Declaration Date: August 8, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Mobile Phone / HD65Plus Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Paul Greene Date: 2023-08-04 Title: CEO Signature of applicant FCC Software Configuration Control Declaration Rev1.1(5G).docx