February 06, 2020 Version 1.20 IF 750 Integration INTEGRATION MANUAL Declarations IF 750 NFC Module declarations This module is designed exclusively for integration in -ebro-
measuring instruments. This module is currently installed in the IF 750 This module is designed for use in USB powered devices 3 IF 750 NFC Module FCC Information FCC notes for a host subject to Supplier's Declaration of Conformity (SDoC) and/or Certification For a host device assembled with the certified module and subject to Suppliers Declaration of Conformity for 47 CFR Part 15 class B digital devices or to Certification, the following statements have to be included in the user manual and the host device has to be labelled as noted below. If the host device is subject to other authorization procedures or parts, the appropriate requirements of these authorization procedures or parts apply. The end device must be labeled with (for details see 15.212):
Contains FCC ID: VQ5-NFCMODULE2 Labelling requirements (on end device or in user manual, for details see 15.19):
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Information to the user (in user manual if subject to SDoC, for details see 15.105):
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-able protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the Receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 4 IF 750 NFC Module FCC Information Modification of equipment (in user manual, for details see 15.21):
The instruction manual of the host shall include the following statement:
Changes or modifications made to this equipment not expressly approved by the party responsible for compliance may void the FCC authorization to operate this equipment. Special accessories (in user manual, for details see 15.27):
Where special accessories such as shielded cables and/or special connectors are required to comply with the emission limits, the instruction manual shall include appropriate instructions on the first page of the text describing the installation of the device. RF exposure statement (in user manual):
This device complies with the RF exposure requirements for mobile and fixed devices. However, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. 5 IF 750 NFC Module IC Information ISED notes for a host subject to Supplier's Declaration of Conformity (SDoC) and/or Certification For a host device assembled with the certified module and subject to Suppliers Declaration of Conformity or to Certification, the following statements have to be included in the user manual and the host device has to be labelled as noted below. According to RSS-Gen, the device does not need to comply with the labelling requirements of the applicable ICES. Therefore, there are no additional requirements regarding labelling if SDoC applies to the host. If the host device is subject to other authorization procedures, the appropriate requirements of these authorization procedures apply. The end device must be labeled with (for details see RSS-Gen):
Contains IC: 7412A-NFCMODULE2 User manual notice (in user manual, for details see RSS-Gen and CNR-Gen):
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1) Lappareil ne doit pas produire de brouillage;
2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 6 IF 750 NFC Module Label IF 750 NFC Module Label Part No. Description Version FCC ID IC ID 8 052668 NFCMODULE2 V 1.00 FCC ID:VQ5-NFCMODULE2 IC: 7412A-NFCMODULE2 IF 750 NFC Module Positioning IF 750 NFC Module Positioning Position
- The NFC module is in the area of the label under the housing front side Charger coil 10 NFC coil IF 750 NFC Module Positioning Position
- The NFC module is in the area of the label under the housing front side Charger coil 052668 NFCMODULE2 V 1.00 FCC ID:VQ5-NFCMODULE2 IC: 7412A-NFCMODULE2 NFC module NFC Module pluggable, connected via ribbon cable with ferrite 11 IF 750 NFC Module Positioning Position
- The NFC module is in the area of the label under the housing front side Charger coil Antenna and circuit NFC module Mainboard Ethernet connector USB connector BT Module 12 IF 750 Device Label and Location IF 750 Device Label and Location 14 Additional Versions of IF 750 Additional Versions of IF 750 Currently, CS 750 is the only additional version of IF 750 CS 750 does neither contain NFC nor BT module WPT part of CS 750 is identical to IF 750 16 CS 750 WPT Part Positioning Position
- No NFC module, no BT module
- Only charger coil Charger coil 17 CS 750 WPT Part Positioning Position
- No NFC module, no BT module
- Only charger coil Charger coil Mainboard
(population variant) USB connector only power supply 18 CS 750 Device Label and Label Location 19