FCC ID: 2AB9W-MAX01 3D Printer

XYZPRINTING da Vir User Ma:

Please read the product User Manual carefully before using this product. This user manual is mainly intended for users to understand how to use the da Vinci Max 3D printer

( Max ) correctly. In the user manual, users can learn more about the operating tips, application skills and maintenance of the Pro EVO 3D printer. For more information on the Max, please contact your local dealer or visit the official website of XYZprinting: http://Awww.xyzprinting.com. LIMITATION OF WARRANTY AND LIABILITY XYZprinting is responsible for the device in its original configuration. Any changes to the configuration of the machine must be performed or authorized by the XYZprinting technical department. XYZprinting is not responsible for the problems and warranty dues to the use of not original spare parts or printing materials. Print History New editions of this manual incorporate new and changed material different from previous editions. Minor corrections and updates may be incorporated into reprints of the current edition without releasing additional announcements or documentation regarding the updated version. The User Manual is for user reference only. If you need to obtain the latest information, you are welcomed to visit the XYZprinting website: www.xyzprinting.com Table of contents Important Safety Precautions Safety and Regulation Safety Instructions Note On Power Supply Voltage setting Safety Notice and label content About da Vinci Max Introduction Specifications Accessory Checklist Precautions and Instructions of Maintenance Tools Maintenance and Service Unpacking and Installation Unpacking Hardware Installation SNM OW UW BR WwW WW NY NH KN LN NAN no uk Software Installation Function and Description Main Screen Function Introduction Print System NrPPrRe oOMoOn Dn OD Toool Ny W More Info Support information Product warranty NO SS Important Safety Precautions Safety and Compliance Please read through this manual and all safety precautions carefully before using, operating, unpacking, replacing, removing any part or maintaining this product. Please also comply with the instructions of relevant safety. Safety Instruction Do not move the machine by yourself as it is heavy. Do not place the printer on a soft or tilted surface. Otherwise, the machine will fall / flip over and become damaged or cause personal injury. Do not place the printer in a dusty, humid or outdoor environment. e Weak odors may be generated during the printing process. We recommend working in a well-ventilated. Do not leave the product or power cord to unattended children. Otherwise, personal injury or electric shock might occur. TEAM LIFTING Do not place any liquid container on top of the product. Otherwise, overflow or spill REQUIRED might go into the machine and pose the risks of danger or safety concern. Do not wipe the printer with alcohol or flammable chemicals. Otherwise, danger might Occur. Do not move the machine when its powered on. Please use the provided power cord. Otherwise, incorrect grounding might lead to damage. Do not reach into the machine with your hands during operation. Otherwise, risks of impact from moving printing parts or burn from high temperature might occur. The machine becomes hot during operation and thus run in high temperature. Do not touch or replace parts when they are not cooled down. After startup, the parts in the machine will heat up or move depending on the users instructions. During product operation, do not touch or block the operation of the parts. Defect reparation must be carried out according to the contents of this instruction manual. Where the defect cannot be repaired, please contact your printer dealer or the customer service center. Note on Power Supply Do not use with damaged cord or plug. To unplug grasp the plug, not the cord. Do not handle plug or machine with wet hands. Do not handle plug or machine with wet hands. Turn off the power switch before unplugging. Do not run the machine over cord. Keep cord away from heated surfaces. If the system is left in idle mode for an extended amount of time, turn off the main switch. Voltage setting Please switch to the voltage range in your region. The voltage has been set up for use in Europe, America, Asia and other regions. Please check the voltage range in your region before switching to change the voltage. The voltage has been set up. The voltage has been set up. Please check the voltage Please check the voltage range in your region before range in your region before |

switching to change the switching to change the |

voltage. voltage. |

Failure to set the voltage correctly will result in hazards such as machine damage, fire or burning. Safety Notice and label content Class | Equipment. This equipment must be earthed. The power plug must be connected to a property flamentd earth ground socket outlet. An improperly flamentd sacket autiet could place hazardous voltages on accessible metal parts. Marking of hazardous moving parts. Safety frst. Hazardous moving parts keep fingers and other body parts away. Keep clear of moving machinery. replace parts when thay are not cooled down. After startup, the parts in the machine will heat up or move depending on the user's Intructions. i The machine becomes hot during operation and thus run in high temperature. De not touch or During product operation, do not touch or block the operation of the parts. About da Vinci Max Introduction

eee BE rove

@$witch

@Touch screen

@eExtruder module

@ Print bed and removable magnete print bad

@Air filter

@USB driver port

@Network port

@Filament spool holder

@Filament spool holder lock

@Voltage setting port

@Power switch

@Power jack Operating Requirements system Requirements Specifications

( Printing Properties

. TPU / Nylon / Carbon Fiber / PETG / ABS / PLA/ PC / Tough PLA Yes Nozzle Temperature Max. 240 C / 464 F NozsleDiametor Om Nozzle Temperature Max. 300 C / 572 F Print bed temperature 40 ~ 120 C / 104 ~248 F Language Multilingual (Traditional Chinese, Simplified Chinese, English, Japanese, German) macOS: 10.14 ~

For PC: CPU 4" Generation Intel Core i5 Processor or more /

RAM: 8GB/ Hard disk space: 20GB or more For MAC: RAM: 8GB / Hard disk space: 20GB or more 30 ~ 60 % RH Product dimensions (WxDxH) 576 x 522 x 559 mm Net weight Minimum Hardware Requirements 7 Accessory checklist

@Top cover Xt @Bundled filament X1

oo module X1 Power cord X1 @Ethemet cable X1

@igh emnpereture exudes memse; caltbration sheet X1 @Guide tube Xi

@Removable magnet print bed @spatula x1 @ntemal flament spoal holder Xt x1

+ Filament should be unloaded from the extruder module before cleaning the feeding path.

%* Care should be taken during the operation to avoid potential burn injuries.

(USB drive X1

(contains manual, software installer and print test file.) (Print bed glue X1

@Tool Box X1

@External fllament spool support frame (Includes screwdriver and tool kit)

(retainer ring / filament reel rod) X1 The company reserves the rights at any time under the specific circumstances of accessory to improve the right of specific style and size to actual supply prevall. Precautions and Instructions of Maintenance Tools The following tools are intended for use under the guidance or guardianship of an adult only. Do not allow children unfamiliar with the tools to have access to them in case of danger.

(Nozzle cleaning needle (0.4mm) Regular cleaning of the print nozzle facilitates to not only extending service life of the printer, but also Improves print quality. To prevent the poor flow due to the residual and accumulation of the consumables on the nozzle after a long time of use, which will affect the printing quality, it is recommended to use the nozzle deaner to remove the residual material. Insert the cleaner from the bottom of the nozaie tound t. Maintenance and Service When the printer needs to be serviced during the term of the warranty, it is recommended that the machine is packed with original packaging materials prior to shipment. For thls purpose, the packaging materials are better to be kept. If other packaging materials are used instead, the printer might be damaged during printing. We reserve the right to assess relevant service fees.

Unpacking and Installation Unpacking Please follow the instructions to unpack the product. Failure to follow the procedure may result in damage to parts.

(1)Remove the PP belt and cut the packing tape. (3)Remove the cushions and accessories above the machine.

(2)Open the outer box, and take out corner protectors and the upper accessory tray.

(4)Take out the printer together. AA i a ZA S se

(5)Remove the packaging bag. (7)Remove the shaft clips (a total of 4 pieces) on the X-axis and the Y-axis on both sides.

(6)Cut the cable ties that protect the Y-axis on the upper on both sides and remove the protective materials.

(8)Remove the tape holding the foam.

(9)Push the printing module to the left first and then (0)Push the X-axis forward (in the direction of the front remove the protective packing materials on the front door) and then remove the rear protective packaging of the X-axis. materials. T)\ >More Info System ee:

Leveling Stoo Fan Back eheating Filament Internet 0.1mm | imm | 10mm s i1)Open the front door and take out the packing (4)Click and select "Tool" on the home page, and click materials on the top cover (you can lift it up slightly). "Manual", then click the Z-axis upward icon to raise the platform to the middle position. a ; en, 7 i roof y ; I I 2)Connect the printer to the power cord and turn on the power switch.

(3)Press the on/off key on the front of the printer.

(5) Take out the lower protective packing materials and accessories.

(6) The unpacking is complete. Hardware Installation

@ Filament spool support frame and filament installation Put the reel of filament through the reel support tube. Pull up the telescopic support rods on both sides in the rear of the printer. Slightly push on the lower spring fastener to take back Then put the retainer ring through both ends of the shaft the support rods. tube to fix the filament reel. Please make sure the screws on the retainer ring are used to fix the retainer ring. The shaft tube is installed and placed on the filament reel support rod. Note:

When printing TPU material, it is not necessary to put it through this guide tube, and the filament can be directly inserted into the feeding hole of the printing module. Put the top cover on and the installation is complete. Take out the end of the filament, put it through the feeding channel and insert it into the feeding hole of the printing module. L h

@Exiruder Module Ramavement It needs to take down the alr guide to remove one of Filament should be unloaded from the extruder module the screws. before modula removement, Please keep all disassembled parts property during disaasembly,

@Tuming the printer off.

@Remove the screws fing the extruder module plastic caver to remove the cover,

@Press both ends of the heated flat cable and unplug the heating cable.

@Remove the fixing screws under the module (4 in

@Lock this screw back first, and restore the alr guide parts to Its original postions.

@Continue to lock the other three screws back.

@Put on the extruder module plastic cover parts, tighten the fixing screws, and complete the installation, 4 XZmaker Max 1.0.0 Setup ax 1.0.0 is being installed. DB xvzmmaker Max 1.0.0 Setup Installing Please wait while XY2maher IM jude you through the installaton of XZmaker mended that you dose al other applications rien Cole, Tide ad ecokes # renee tn: pe eurilate 6 before instaling XY2maker Max 1.0.0.

@ xv Zmaker Max 1.0.0 Setup License Agreement Please review the beense tern

(Chick Next to continue. Ximaker Maw 1.0.0 has been installed on your computer.

(Gick Firesh to dose Setup. Nodicoft Install Spcharn v3.06.0 est of the agr LIC LICENSE une DOO soft Instat Syshem v3.06. 1 dick I Agree to continue. You must accept the 7) Run iv2maker Max 1.0.0 install XZmaker Max 1.0.0. Setup veil install XYZmaker Max 1.0.0 in the following folder. To install in a different folder, cick Browse and select another folder. Chick Insttall to start the inctallation. Copyright (C) 2007 Free Software Founcaten, Inc. <

Everyone is permitted te copy and distribute verbatim comes of this loense document, but changing it is not alowed, f you accept the terms of the agreement, qreement to install XYZmaker Mas: 1.0.0. Ths Vereen of ihe GNU Lene Genera! Pubec License incorporates the terms and conditions of version 3 of the GNU General Public Uicense, supplemented by the additional permissions listed below.

| <pack [tage ] | cance |

@ xVZmaker Max 1.0.0 Setup

(Cheese Install) Location Choose the folder in which to Nudsott Install System v3.06, |

Welcome to X7maker Max

[C:\Program Files\XYZmaker Max 1.0) ] | Browse... Please follow these steps to att up X2maker Max, This veil only take a few moments. Space required: 819.0 MB Space available: 35.2 GB Software Installation XY Zmaker Max should be installed on the service PC for preparing the files for production. Connect the USB drive provided with the printer to your PC. After booting the software driving procedure, the installation program will appear on your PC screen. Click the program twice to start installation. For more software function introduction, please refer to the software manual. Please visit the website of XYZprinting: http://www.xyzprinting.com for more latest software information. Functior d descriptio!

Main Screen Function Introduction Print iM The left side displays the temperature of the printing module, the temperature of the platform, and the reading status of the USB flash drive. Please use "XYZmaker Max for preparing the slice file, and then save It to USB flash drive and print through the USB flash drive. During the printing, please do not remove the USB flash drive to avoid affecting the printing. Select file to print.

~% G a %

System Tool More Info Main functions:

A) USB menu. Enter the preview to confirm the Image file, then press. System Printer settings. (e.g. the language. | > | "tw print setting of the operation screen.)

% Teol xiaogao.gcode Printer adjustments and settings, Including filament, print bed, fans, etc. By More Info You can visit the website:

https/Avwwxyzprinting.com for more latest information. View printer status while printing E : Et et | 20h00m 00h37m a 535 | | |

ae au

"3D Printer/3.Test fil e/xiaogao.gcode Enter "Printing Tools" during printing

Label location SIZE:12mm*9mm Model: da Vinci Max 2AB9W-MAX01 Label Material: Laser laser Label color: silver gray The content of the label color: Black

C5266091_X24_Ed.1 Attestation Statements TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules for covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) that prohibit equipment authorization Applicant Company name: XYZprinting, Inc. Grantee code: 2AB9W FCC ID: 2AB9W-MAX01 Contact Name: Ren Chen Address:

Telephone No: 886-2-77058001 Fax No: 886-2-77058001#27277 Email: Ren_chen@xyzprinting.com 10F.,No.99, Sec. 5, Nanjing E. Rd., Songshan Dist., Taipei City 10571, Taiwan i. ii.

[XYZprinting, Inc.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification.

[XYZprinting, Inc.] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing covered equipment. The applicant must sign this certification. Date: 2023/02/24 Applicants Name: Ren Chen Title: Manager Signature 1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1

XYZprinting, Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AB9W-MAX01 To Whom It May Concern, Date: 2023-02-24 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality Short-Term Confidentiality NOTE 2 No No No No No No No No No No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Ren Chen Title: Manager 1/1

XYZprinting, Inc. Letter of Authorization Company: XYZprinting, Inc. Address: 10F.,No.99, Sec. 5, Nanjing E. Rd., Songshan Dist., Taipei City 10571, Taiwan Product Name: 3D Printer Model Number: da Vinci Max FCC Identifier: 2AB9W-MAX01 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Ren Chen Date: 2023-02-24 Title: Deputy Chief Engineer Signature of applicant:

1/1

US Agent for Service of Process LETTER OF ATTESTATION TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process:

Company Name: USA MEIHUA TRADING INC FRN: 0033406166 Contact Name: Harley Quinn Address: 5379 Pine Valley Ct Boulder CO 80301 United States Telephone No: 1-312-363-9424 Email: meihua-trading-inc@foxmail.com This letter is to confirm that the US Agent for Service of Process accepts responsibility to act as a local representative on behalf of XYZprinting, Inc. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. Applicant:

Company name: XYZprinting, Inc. Product Description: 3D Printer Grantee code:

FCC ID:

Contact Name:

Address:

Telephone No:

Email:

2AB9W 2AB9W-MAX01 Ren Chen 10F.,No.99, Sec. 5, Nanjing E. Rd., Songshan Dist., Taipei City 10571, Taiwan 886-2-77058001 Ren_chen@xyzprinting.com The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. This Agreement is valid until (03-01-2024). Date: 03-01-2023 Applicants Name: Ren Chen Title: Deputy Chief Engineer Signature:

US Agent for Service of Processs Name:

Harley Quinn Title: Manager Signature:

1/1