FCC ID: 2AXBPTP005 2.4g wireless heart band

Activity | Sports | Lifestyle Owners Manual

WARNING MAX USER WEIGHT: 100KGS IMPORTANT SAFETY INSTRUCTIONS

WARNING Users should consult with a physician before begin-

ning any exercise or conditioning program. he safety level of the device can only be held if it is regularly tested for damage and wear. Parti-

If you pass this device or use it by another person, make sure that the user is aware of the contents This unit can only be used by one person to exercise Check that all screws, bolts and other connections are firmly seated before using them for the first Remove all sharp objects from the vicinity of the unit before starting the workout. Exercise only on the device if it works properly. Defective parts must be exchanged immediately and / or the appliance cannot be used until the cu- lar attention must be paid to the end caps / castors of the feet, the pedals, the handles and the m- ving elements. of this manual. time and then at regular intervals. maintenance. Parents and other supervisors should be aware of their responsibilities because, due to the childs natural playfulness and the ability to experiment, the children will be faced with situations for which the training equipment is not built. When you have children trained on the device, you should consider their mental and physical de-

velopment and, above all, their temperament. You should supervise the children, if necessary, and should point out the correct use of the appliance. As a toy, the training equipment is by no m- ans suitable. due to their natural play, for which it is not intended and can cause accidents. during the exercise and interfere with the flow. even- ness are compensated for. Always wear training clothes and shoes that are suitable for a fitness training when you are work-

ing on the device. The clothing must be designed in such a way that it cannot get stuck anywhere during the workout due to its shape. The shoes should be chosen according to the training device, give the foot a firm hold and have a non-slip sole. with concrete information about the stress intensity that is appropriate for you and give you tips on tra-

ning and nutrition. Please note that incorrect and excessive training can endanger your health. Please note that levers and other adjustment mechanisms do not extend into the range of motion When installing the unit, please ensure that there is sufficient clearance in each direction. Children should not be near the unit unattended, as they can use the unit in a kind and fashion In general, you should consult your doctor before taking a training course. He can provide you When setting up the appliance, make sure that the appliance is stable and possibly ground un-

1 IMPORTANT SAFETY INSTRUCTIONS Please read the instructions carefully before you start the assembly!

When tightening the screw conections, make sure that the movement is not affected by exces- sive tightening. Movable gel parts ( plain bearings, etc. ) must be greased from time to time with standard lub- cricating grease. If you experience dizziness, nausea, chest pain, or other abnormal symptoms, stop training and In general, sports equipment is not a toy. They may therefore only be used according to the regu-

Install the device according to the instructions for use and use only the device-specific parts enc-

lo- sed with the device. Before assembly, check the completeness of the delivery using the parts list in the assembly and operating instructions. Place the unit in a dry, level place and protect it from moisture. If you want to protect the installa-

tion site especially against pressure points, dirt or the like, we recommend that you place a suitable, non-

slip support underneath the unit. la- tions and by appropriately informed or instructed persons. consult immediately your doctor. the presence of another person, who can provide help and guidance. ving parts. ment position Never train immediately after meals!

Inspect the unit for loose components before each use. Only place the unit on stable surfaces Do not use the appliance if you weight more than 100 kg. Persons such as children, disabled persons and disabled persons should only use the appliance in When adjusting adjustable parts, observe the correct position or the marked, maximum adjust-

Make sure that you and other persons never move with any parts of the body into the area of mo-

2 Section 1 Parts List ITEM 1 2 3 4 5 6 DESCRIPTIONS Computer Sensor with 2 nuts PE clamp Snap hook Screw Heart rate belt QTY 1 1 1 1 1 1 Section 2 Parts Draw 1 2 6 3 4 5 3 Section 3 Display Asmble screw Mount the PE clamp next to the handle, near the prepared hole for the snap hook. The hole, where the sensor will be downwards. later, must point fixed Remove the first nut from the sensor and insert the sensor into the hole. Please make sure that the sensor is pointing inwards. Then screw the nut back onto the sensor and tighten it LOCK UNLOCK

* The connection between the bracket and the Display head is a simple locking mechanism that does not require any tools to be used, but requires extra force to install or detach. Please be advised to tuck into the slot and push very hard to lock in position or detach. Connect the sensor cable to the computer cable. 4 Hang the spring on the blue webbing and the other end on the sensing joint. Firm connection. Open the battery box on the back of the display, install the battery properly, and check whether the display shows the number. Change the spring tension by turning the clamp outwards or inwards. Tighten the screw by hand and test the computer for operation. Then tighten the screw. WARNING! After assembly, open the display, first pull the spring by hand, and check whether there is space for movement of the sensing joint to see whether the display number is bouncing, the number is bouncing, and the installation is successful. 5 Section 4 Wear a heart rate belt Fig. 1 It is recommended that you apply a small amount of water to the electromagnetic area on the back of the elastic band before wearing it (especially when the skin is dry in winter). Fig. 2 Install the heart rate sensor on the snap on the front of the heart rate elastic band. And ensure that the installation is firm and accurate. Fig. 3 Pass the heart rate belt around the chest, just below the chest muscles, and connect the hook to the other end of the elastic belt. Fig. 4 Adjust the length of the elastic band to your comfortable wearing state. Fig. 5 Make sure that the wet electrode area is close to your skin, with the sensor in the center and the top facing up.

WARNING After use, be sure to wash the elastic band with tap water after removing the sensor from the heart rate band. Because sweat and moisture will keep the electrodes wet and keep the heart rate sensor on, this will shorten battery life. 6 Section 5 Computer use With these computers you can extend our trampoline to make your exercises even more effective. It provides important information such as your pulse rate, number of jumps, training time and your calo- ries burned. If the number of jumps is not equal to the number of jumps possible after tensioning the spring (

snap hook ) To turn on your computer, press the Mode or Reset button. The display shows the time and the number of jumps ( count ) by default. Both values are initially set to 0. Scan Pulse During your training you can decide which value you want to display. Press the Mode button to switch between the following values:

Shows your current pulse. Please note that only one value will be displayed here if you have fastened your chest strap and placed it correctly. With this setting the display changes every 5 seconds between Pulse / Time / Calorie. Time spent in your current training session Your calories consumed so far are shown here. Please note that this is an estimated value and actual con-

sumption may vary. Calorie Time When you leave the jumping surface of the trampoline or stop jumping, the data is paused. If you do not continue your training within 3 minutes, your display will go into standby mode. In this case, you must press the Mode / Reset button to turn on the computer again. You can then contin-

ue your training with the previous values. To reset the values, press the Reset button once. 7 The trampoline is intended for use by persons who are fit an healthy. Do not use the trampoline Make sure to check that all screws are tightened each time before using the trampoline and that the Pay attention to damages and gradual wear and tear. Consult a doctor before using the trampoline if: You have not participated or performed much handlebar is set at the correct height and that it is fixed to the frame. Additionally check that the jumping mat has tension and that the 36 elastic ropes are in good condition and looped to the plastic hooks. athletic activities recently, have high-risk health complications, heart or orthopedic problems, or if you are pregnant. First become familiar with your trampoline. Begin your workout slowly. Start with small bounc-

es and increase your intensitiy gradually to higher jumps. Always maintain control. The risk of damages increases with excessive or improper use. consuming food, alcohol or narcotic substances. if you become dizzy or nauseous, heart-related problems, or other health issues. Do not jump aggressively, otherwise you risk injuries to hear head or neck. Warm-up and cooling phase Prepare yourself for training with a warm-up and always cool down at the end of a workout. Stay hydrated and take sufficient breaks to avoid fatigue or injuries. Never exercise when your are tired, exhausted or lacking concentration, otherwise you risk injuries. Never jump from a standing position onto the trampoline and down again. Jump in the middle of the mat only, take care to not jump or step on the edge cover or frame. Jump only in the middle of the mat and be careful not to jump on the edge of the trampoline. Do not jump or climb directly onto the safety mat. This is not designed for carrying a person. The trampoline may only be used by one person at a time. The trampoline is intended for fitness training like bouncing, light jumps. Warm up phase 1. This stage helps to get the blood flowing around the body and the muscles working properly. It will also reduce the risk of cramp and muscle injury. It is advisable to do a few stretching exercises as shown below. Each stretch should be held for approximately 30 seconds, do not force or jerk your muscles into a stretch -

if it hurts, STOP. Exercise phase 2. This is the stage where you put the effort in. After regular use, the muscles in your legs will become more flexible. Work to your butt it is very important to maintain a steady tempo throughout. cool down phase 3. This stage is to let your Cardio-vascular System and muscles wind down. This is a repeat of the warm up exercise e.g. reduce your tempo, continue for approximately 5 minutes. The stretching exercises should now be repeated, again remembering not to force or jerk your muscles into the stretch. As you get fitter you may need to train longer and harder. It is advisable to train at least three times a week, and if possible space your workouts evenly throughout the week. Muscle Toning To tone muscle while on your Crosstrainer you will need to have the resistance set quite high. This will put more strain on your leg muscles and may mean you cannot train for as long as you would like. If you are also trying to improve your fitness you need to alter your training program. You should train as normal during the warm up and cool down phases, but towards the end of the exercise phase you should increase resistance making your legs work harder. You will have to reduce your speed to keep your heart rate in the target zone. Weight Loss The important factor here is the amount of effort you put in. The harder and longer you work the more calories you will burn. Effectively this is the same as if you were training to improve your fitness, the differ-

ence is the goal. 8 Section 6 Software installation STEP 1 Android users Android users enter the Google Store to download Searching for synteam sport in the Google Store will result in two identical software, the first of which is version 1.0 of synteam sport, and here we will choose the second version of 2.0. Then click to download and install. Google Store search interface IOS users search results Download interface IOS users can search for "

2.0" directly from APP STORE to download STEP 2 Software grant permis-

sions After opening the software, you will be prompted to open the storage permission, location permission, and Bluetooth connection permission. At this time, you need to allow it or you cannot establish a Bluetooth connection with the device. IOS version APP download STEP 3 Software account registration and management 3.1. Register an account In the upper right corner of the login interface, you can choose Chinese/English, the registered account is in the lower right corner of the software, click the register button to jump to the registration interface. Login interface Register account interface 9 3.2. Password lost and retrieved If you have forgotten your password, you can click on the forgot password in the lower left corner of the login interface to enter the password recovery interface. Only the account registered with the mobile phone number can retrieve the password. STEP 4 Sports equipment selection 4.1. Sports equipment category The equipment selection needs to be consistent with the type of equipment used. At present, all sports equipment are divided into three categories, namely:

1) Bicycles (riding equipment in distance units) 2) Rowing (rowing equipment in distance units) 3) Frequency category (devices with frequency as unit) Different types of sports equipment cannot be used in the three types of software. For example, connecting a spinning bike can only be found in the option section of spinning bikes, but not in rowing machines or pedometers. Password recovery interface 4.2. Connecting the instrument Make sure that the Bluetooth of the mobile phone is turned on, and the instrument on the sports equipment is turned on, and then select the corresponding plate (number of times) to click and it will automatically scan the surrounding devices. As shown in the figure, the correct device has been scanned. Select sports equipment interface Scan the Bluetooth device interface 10 Show scanned devices STEP 5 Motion interface The exercise interface mainly displays the speed/number of times, distance, calories burned, time, and heart rate.Click the game icon in the upper right corner of the map to enter the game selection interface. Arbi-

trary choice Pedometer motion interface 11 2.4g wireless heart band FCC ID: 2AXBPTP005 trampoline Bluetooth counter FCC ID: 2AXBP-TP005 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

C5266091_X8_Ed.1 Letter of Authorization YANGZHOU JIUXIN SPORTS TECHNOLOGY CO.,LTD. Company: YANGZHOU JIUXIN SPORTS TECHNOLOGY CO.,LTD. Address: NO.7, JIANYE NORTH ROAD, XINJI TOWN, YIZHENG, YANGZHOU CITY, JIANGSU, 211400, CHINA Product Name: 2.4g wireless heart band Model Number: TP005 FCC Identifier: 2AXBPTP005 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Xiang Yu Title: Artisan Date: 2020.08.19 Signature of applicant:

1/1

Creature Information(Guangzhou)Technology Co., Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AXBPTP005 To Whom It May Concern, C5266091_X10_Ed.2 Date:

2020.08.19 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality Short-Term Confidentiality NOTE 2 No No No No No No No NOTE 1 NOTE 1 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ____45__ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: Xiang Yu Title: Artisan 1/1

YANGZHOU JIUXIN SPORTS TECHNOLOGY CO.,LTD. Model Difference Product description: Trampoline Bluetooth counter Model name: TP005, TP003, TP011, TP006, TP004, TP010, TP013, TP016, TP015, TP018, TP019, TP020, TP025, TP026, TP027, TP028, TP030, JP001, JP003, JP004, JP005, JP006, JP007, JP008, JP009, JP010, JP013, JP018, JP020, JP024, JP029, JP032, JP034, JP038, JP040, JP046, JP047, JP048, JP049, JP054, JP055, JP056, JP057, JP058, JP059, JP060, JP063, JP066, JP067, JP064, JP065, JP061, JP070, JP071, JP071, JP100 Trade Name: N/A FCC ID: 2AXBP-TP005 All the model are the same circuit and RF module, only for model name. Regards Sincerely Clients signature:

Clients name / title : Xiang Yu (Artisan) Contact information / address: NO.7, JIANYE NORTH ROAD, XINJI TOWN, YIZHENG, YANGZHOU CITY, JIANGSU, 211400, CHINA