CONTENTS Gun Aware Firearm Sensor Gun Aware Magazine Charger Quick Start Guide AC Power Cord AC Power Adaptor Serial Number Reference Card SUPPORT support@yardarmtech.com | 1-888-347-5155 YARDARM, YARDARM TECHNOLOGIES, YARDARM GUN AWARE and the Stylized Y logo are trademarks of Yardarm Technologies, Inc. and are used under license. All other trademarks are the property of their respective owners. 2017 Yardarm Technologies, Inc. All rights reserved. www.yardarmtech.com Firearm Sensor FCC/IC Label FCC 2AJ3810232 / IC 22055-10232 Magazine Charger FCC/IC Label FCC ID: 2AJ3810199 IC ID: 22055-10199 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. INFORMATION TO USER The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to have the capability to access information in that form. The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to have the capability to access information in that form. Installing the Sensor Pairing the Sensor Step 3 Charge for 8 hours prior to first use. See your administrator for more information. Step 2 Insert the Gun Aware Magazine Charger and connect to power using the equipment includ-
ed in the packaging. Both LED lights on the Charger should be on
(one blue, one green). Step 1 Remove the magazine from your firearm and clear the chamber before proceeding. Install Gun Aware in the weapon by firmly pressing the Sensor into the open space at the bottom of the grip. NOTE: Any Glock Modular Backstrap must be re-
moved prior to installation. Step 1 Insert Charger and connect to power to put the Sensor into pairing mode. Step 2 Open the Motorola PSX Cockpit app on your mobile device. Step 3 Tap Add New Device and then select your Sensor based on its serial number. Note: Your serial number will appear as YA XXXXNN To unpair Use your mobile devices Bluetooth settings.