all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 2.11 MiB | November 15 2021 / May 14 2022 | delayed release | ||
1 |
|
Internal Photos | Internal Photos | 576.33 KiB | November 15 2021 / May 14 2022 | delayed release | ||
1 |
|
External Photos | External Photos | 305.25 KiB | November 15 2021 / May 14 2022 | delayed release | ||
1 |
|
Label and Label Location | ID Label/Location Info | 257.61 KiB | November 15 2021 | |||
1 |
|
Agent Authorization Letter | Cover Letter(s) | 10.99 KiB | November 15 2021 | |||
1 |
|
Confidential Authorization Letter | Cover Letter(s) | 170.60 KiB | November 15 2021 | |||
1 |
|
FCC BT Declaration Letter | Attestation Statements | 118.00 KiB | November 15 2021 | |||
1 |
|
Test Report | Test Report | 1.47 MiB | November 15 2021 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 181.71 KiB | November 15 2021 / May 14 2022 | delayed release |
1 | User Manual | Users Manual | 2.11 MiB | November 15 2021 / May 14 2022 | delayed release |
RoomSensor Quick Start Guide (V1.0) EN / CN / DE / FR / ES FCC Caution:
that may cause undesired operation. IMPORTANT NOTE:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. ISEDC Warning This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d' Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.The minimum distance from body to use the device is 20cm. Le prsent appareil est conforme Aprs examen de ce matriel aux conformit ou aux limites dintensit de champ RF, les utilisateurs peuvent sur lexposition aux radiofrquences et la conformit and compliance dacqurir les informations correspondantes. La distance minimale du corps utiliser le dispositif est de 20cm. Table of Contents English..............................................................1
.......................................................... 4 Deutsch...........................................................7 Franais...........................................................10 Espaol...........................................................13 Package Contents E N G L I S H 1 2 Test Key Press the Test key to enter the test mode*. Press the Test key for about 5s to reset the factory.
* Test Mode: For debugging during installaion. If a person is detected, the occupancy status light will always be on until no person is detected. 1 RoomSensor 6 30mm 2 T4 x 30mm 2 PIR Blocking Sticker 5 3M Adhesive Tape Battery
(CR123A) Hardware Component Instructions Light PIR Len You can rotate the PIR len or glue the PIR blocking sticker to shield the areas that you don't want to detect. Power Supply Installation Mount on the Ceiling 3M Adhesive Tape Option 1 E N G L I S H E N G L I S H Option 2 2 34 Mount on the Wall E N G L I S H 3 3M Adhesive Tape Option 1 Option 2 PIR
* RoomSensor RoomSensor 6 30mm 2 T4 x 30mm 2 PIR 5 3M
(CR123A Test Test Test 5 PIR PIR 4 12 1 5 2 34 1 2 6 Verpackungsinhalt D E U T S C H Taste Test Drcken Sie die Taste Test, um in den Testmodus* zu gelangen. Drcken Sie die Taste Test fr ca. 5 Sekunden, um die Werkseinstellungen zurckzusetzen.
* Testmodus: Fr die Fehlersuche whrend der Installation. Wurde eine Person erkannt, ist das Licht im Prsenzstatus dauerhaft an bis die Person wieder weg ist. 7 RoomSensor 6 30mm 2 T4 x 30mm 2 PIR -
Abdeckaufkleber 5 3M-Klebeband Batterie
(CR123A) Anleitung fr die Hardware-Komponente Licht PIR-Linse Sie knnen die PIR-Linse drehen oder die Linse abkleben, damit bestimmte Bereiche nicht erfasst werden. 12 Stromversorgung Montage Montage an Decke 3M-Klebeband Option 1 Option 2 D E U T S C H 8 34 Montieren an der Wand 3M-Klebeband Option 1 Option 2 D E U T S C H D E U T S C H 9 Contenu de la bote RoomSensor 6 30mm 2 T4 x 30mm 2 Autocollant de blocage du capteur infrarouge passif 5 Bande adhsive 3M Batterie
(CR123A) Instructions du composant matriel Lumire Objectif du capteur infrarouge passif Appuyez sur la touche Test pour passer en Vous pouvez pivoter lobjectif du capteur infrarouge passif ou coller lautocollant de blocage de celui-ci pour protger les zones que vous ne souhaitez pas dtecter. touche Test mode Test*. Appuyez sur la touche Test pendant environ 5 secondes pour rinitialiser aux paramtres dusine.
* Mode test : Pour le dbogage pendant linstallation. En cas de dtection dune personne, le voyant dtat doccupation reste activ jusqu ce que plus personne ne soit dtect. F R A N A I S 10 12 F R A N A I S Alimentation Installation Monter au plafond Bande adhsive 3M Option 1 11 Option 2 34 Montez le sur un mur Option 1 Bande adhsive 3M Option 2 F R A N A I S 12 Contenido de la caja E S P A O L Clave de prueba Presione la tecla Test para entrar en el modo de prueba *. Presione la tecla Test durante aproximadamente 5 segundos para restablecer a valores de fbrica.
* Modo de prueba: para depurar durante la instalacin. Si se detecta una persona, la luz de estado de ocupacin siempre estar encendida hasta que no se detecte a ninguna persona. 13 RoomSensor 6 30mm 2 T4 x 30mm 2 Pegatina Bloqueo Cinta adhesiva 3M PIR 5 Batera
(CR123A) Instrucciones de Componentes de Hardware luz Lente PIR Puede girar la lente PIR o pegar la pegatina de bloqueo PIR para proteger las reas que no desea detectar. 12 Fuente de alimentacin Instalacin Montar en el techo Cinta adhesiva 3M Opcin 1 E S P A O L Opcin 2 14 34 Montaje en pared E S P A O L 15 Opcin 1 Cinta adhesiva 3M Opcin 2 Declaration of Conformity We, YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD Address: 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. China Manufacturer: YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD Address: 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. China DATE: 22th /August/2021 declare that the product Type: Room Sensor Model: RoomSensor meets the essential requirements and other relevant provisions according to the following EC directive Directive: 2014/30/EU, 2014/35/EU,RED 2014/53/EU Conformity The product complies with the following standards:
Safety : EN 62368-1:2014+A11:2017 EMC: EN 55032:2015+A11:2020 EN 55035:2017+A11:2020 EN61000-3-2: 2014 EN61000-3-3: 2013+A1:2019 Radio:ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-17 V3.2.4, ETSI EN 300 328 V2.2.2;
Health :EN 50663:2017;EN 62479:2010 Directive 2011/65/EU and (EU)2015/863 of the European Parliament and of the Council of 8 June 2011 and 4 June 2015 on the restriction of the use of certain hazardous substances in electrical and electronic equipment(RoHS 2.0) Directive 2012/19/EU of the European Parliament and of the Council of 4.July.2012 on Waste electrical and electronic equipment(WEEE) Regulation (EC) No.1907/2006 of the European Parliament and of the Council of 18.December.2006 on Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) NAME: Huahu Wang th DATE: 22 /Aug /2021 TITLE: Manager YEALINK (EUROPE) NETWORK TECHNOLOGY B.V. Address: Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, the Netherlands Telephone: +31 (0) 64 61 11 373 Email: EUROPE@Yealink.com E N G L I S H Storage temperature: -22 to +160F (-30 to +70C) Regulatory Notices Operating Ambient Temperatures Operating temperature: +14 to 113F (-10 to 45C) Relative humidity: 5% to 90%, noncondensing Warranty Our product warranty is limited only to the unit itself, when used normally in accordance with the operating instructions and the system environment. We are not liable for damage or loss resulting from the use of this product, or for any claim from a third party. We are not liable for problems with Yealink device arising from the use of this product; we are not liable for financial damages, lost profits, claims from third parties, etc., arising from the use of this product. DC symbol is the DC voltage symbol. Do not tread on, pull, or over-bend any cable in case of malfunction of the device. During a thunderstorm, stop using the device and disconnect it from the power supply. Unplug the power plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid lightning strike. If the device is left unused for a rather long time, disconnect it from the power supply and unplug the power plug. When there is smoke emitted from the device, or some abnormal noise or smell, disconnect the device from the power supply, and unplug the power plug immediately. Contact the specified maintenance center for repair. Do not insert any object into equipment slots that is not part of the product or auxiliary product. Before connecting a cable, connect the grounding cable of the device first. Do not disconnect the grounding cable until you disconnect all other cables. Cleaning Requirements Before cleaning the device, stop using it and disconnect it from the power supply. Use a piece of soft, dry and anti-static cloth to clean the device. Keep the power plug clean and dry. Using a dirty or wet power plug may lead to electric shock or other Restriction of Hazardous Substances Directive (RoHS) This device complies with the requirements of the EU RoHS Directive. Statements of compliance can be obtained by contacting support@yealink.com. perils. Safety Instructions Save these instructions. Read these safety instructions before use!
The following basic safety precautions should always be followed to reduce risk of fire, electrical shock, and other personal injury. ENVIRONMENTAL RECYCLING During the process of storage, transportation, and operation, please avoid collision and crash of Always adhere to prevailing regulations Before you install and use the device, read the safety instructions carefully and observe the During the process of storage, transportation, and operation, please always keep the device dry General Requirements situation during operation. and clean. the device. Please attempt not to dismantle the device by yourself. In case of any discrepancy, please contact the appointed maintenance center for repair. Without prior written consent, no organization or individual is permitted to make any change to the structure or the safety design of the device. Yealink is under no circumstance liable to consequences or legal issues caused by such changes. Please refer to the relevant laws and statutes while using the device. Legal rights of others should be respected as well. Environmental Requirements Place the device at a well-ventilated place. Do not expose the device under direct sunlight. Keep the device dry and free of dusts. Place the device on a stable and level platform. Please place no heavy objects on the device in case of damageand deformation caused by the heavy load. materials. Keep at least 10 cm between the device and the closest object for heat dissipation. Do not place the device on or near any inflammable or fire-vulnerable object, such as rubber-made Keep the device away from any heat source or bare fire, such as a candle or an electric heater. Keep the device away from any household appliance with strong magnetic field or electromagnetic field, such as a microwave oven or a refrigerator. Operating Requirements Do not let a child operate the device without guidance. Do not let a child play with the device or any accessory in case of accidental swallowing. Please use the accessories provided or authorized by the manufacturer only. The power supply of the device shall meet the requirements of the input voltage of the device. Pleaseusethe provided surge protection power socket only. Before plugging or unplugging any cable, make sure that your hands are completely dry. Do not spill liquid of any kind on the product or use the equipment near water, for example, near a bathtub, washbowl, kitchen sink, wet basement or near a swimming pool. Never dispose of the device with domestic waste Ask your Town Council about how to dispose of it in an environmentally friendly way. The cardboarc box, plastic packaging and player components may be recycled in accordance with prevailing recycling regulations in your country. Those who fail to do so may be fined or prosecuted in accordance with the law. The crossed out garbage can that appears on the device means that when it has reached the end of its useful life, it should be taken to a special waste disposal centre and treated separately to general urban waste. Troubleshooting The unit cannot supply power to Yealink device. There is a bad connection with the plug. 1. Clean the plug with a dry cloth. 2. Connect it to another wall outlet. The usage environment is out of operating temperature range. 1. Use in the operating temperature range. The cable between the unit and the Yealink device is connected incorrectly. 1. Connect the cable correctly. You cannot connect the cable properly. 1. You may have connected a wrong Yealink device. 2. Use the correct power supply. Some dust, etc., may be in the port. 1. Clean the port. Contact your dealer or authorized service facility for any further questions. Contact Information YEALINK NETWORK TECHNOLOGY CO.,LTD. 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C YEALINK (EUROPE) NETWORK TECHNOLOGY B.V. Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands YEALINK (USA) NETWORK TECHNOLOGY CO., LTD. 999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA Made in China Sicherheitshinweise Betriebsumgebungstemperaturen Betriebstemperatur: -10 bis 50 C Relative Luftfeuchtigkeit: 5 % bis 90 %, nicht kondensierend Lagertemperatur: -30 bis + 70 C Garantie Unsere Produktgarantie ist auf das Gert selbst beschrnkt, wenn es normal und gem den Betriebsanweisungen und der Systemumgebung verwendet wird. Wir sind weder fr Schden oder Verluste haftbar, die aus der Verwendung dieses Produkts entstehen, noch fr Ansprche eines Dritten. Wir sind nicht haftbar fr Probleme mit dem Yealink Gert, die aus der Verwendung dieses Produkts entstehen. Wir sind nicht haftbar fr finanzielle Schden, Gewinnverluste, Ansprche Dritter etc., die aufgrund der Verwendung dieses Produkts entstehen. Symbol DC ist das Symbol fr DC-Spannung. Richtlinie zur Beschrnkung der Verwendung bestimmter gefhrlicher Stoffe in Elektro- und Elektronikgerten (RoHS) Das Gert erfllt die Anforderungen der RoHS-Richtlinie der EU. Fr Besttigungen der Einhaltung knnen Sie sich an support@yealink.com wenden. Reinigungsvorschriften Verschtten Sie keine Flssigkeiten auf das Gert und verwenden Sie es nicht in der Nhe von Wasser, beispielsweise in der Nhe einer Badewanne, Waschschssel, einem Splbecken, in einem feuchten Keller oder in der Nhe eines Schwimmbeckens. Treten Sie nicht auf das Kabel, ziehen und verbiegen Sie es nicht, da es dadurch zu einer Fehlfunktion des Gerts kommen kann. Schalten Sie das Gert bei Gewitter aus und trennen Sie es von der Stromversorgung. Ziehen Sie das Netzkabel und das ADSL-Twisted-Pair-Kabel (Festnetzkabel) zurVermeidung eines Blitzschlags. Wenn das Gert lngere Zeit ungenutzt bleibt, trennen Sie es von der Stromversorgung und ziehen Sie den Netzstecker. Wenn Rauch oder ungewhnliche Gerusche oder Gerche aus dem Gert austreten, trennen Sie das Gert sofort von der Stromversorgung und ziehen Sie das Netzkabel. Wenden Sie sich an das angegebene Wartungscenter fr eine Reparatur. Fhren Sie keine Gegenstnde in Einschbe oder Anschlussffnungen des Gerts ein, die kein Bestandteil des Produktes oder ein Zubehrteil sind. Schlieen Sie zuerst das Erdungskabel des Gerts an, bevor Sie ein Kabel anschlieen.Trennen Sie das Erdungskabel nicht, bis nicht alle anderen Kabel entfernt wurden. Bevor Sie das Gert reinigen, schalten Sie es aus und trennen Sie es von der Stromversorgung. Verwenden Sie ein Stck trockenes, weiches und antistatisches Tuch zum Reinigen des Gerts. Halten Sie das Netzkabel sauber und trocken. ber einen schmutzigen oder nassen Netzstecker kann es zu einem elektrischen Schlag oder anderen Gefahren kommen. UMWELTFREUNDLICHE VERWERTUNG D E U T S C H Lesen Sie vor der Installation und Verwendung des Gerts die Sicherheitshinweise sorgfltig durch und Entsorgen Sie das Gert nicht mit dem Hausmll. Sicherheitshinweise Bewahren Sie diese Anweisungen auf. Lesen Sie diese Sicherheitshinweise vor der Verwendung!
Die folgenden grundlegenden Vorsichtsmanahmen mssen zur Vermeidung von Brnden, Stromschlag und anderen Verletzungen immer befolgt werden. Allgemeine Vorschriften beobachten Sie die Situation im Betrieb. Halten Sie das Gert whrend der Lagerung, dem Transport und dem Betrieb stets sauber und trocken. Vermeiden Sie whrend der Lagerung, dem Transport und dem Betrieb stets Zusammenprallen und Strze des Gerts. Versuchen Sie nicht das Gert eigenstndig zu demontieren. Wenden Siesich im Falle von Mngeln an das zustndige Wartungscenter fr eine Reparatur. Ohne vorherige schriftliche Zustimmung drfen weder Unternehmen noch Einzelperson nderungen an der Struktur oder dem Sicherheitskonzept des Gerts vornehmen. Yealink bernimmt unter keinen Umstnden die Haftung fr Folgen oder Rechtsansprche, die auf solche nderungen zurckzufhren sind. Beachten Sie bitte die entsprechenden Gesetze und Vorschriften bei der Verwendung des Gerts. Die gesetzlichen Rechte Dritter mssen ebenfalls beachtet werden. Umweltvorschriften Sonneneinstrahlung aus. Stellen Sie das Gert an einem gut belfteten Or t auf. Setzen Sie das Gert nicht direkter Halten Sie das Gert trocken und frei von Staub. Stellen Sie das Gert auf einen stabilen, ebenen Untergrund. Bitte legen Sie keine schweren Gegenstnde auf das Gert, da Beschdigung und Verformungen durch zu hohe Last mglich sind. Wrmeabfuhr zu gewhrleisten. Gummimaterialien auf. Halten Sie mindestens 10 cm Abstand zwischen dem Gert und dem nchsten Objekt ein, um die Stellen Sie das Gert nicht auf oder in der Nhe von entflammbaren oder brandgefhrdeten Objekt wie Halten Sie das Gert fern von Hitzequellen und offenem Feuer, wie Kerzen oder einer elektrischen Heizung. Halten Sie das Gert fern von jedem Haushaltsgert mit starkem Magnetfeld oder Elektromagnetfeld, z.B. einem Mikrowellenherd oder einem Khlschrank. Betriebsvorschriften Lassen Sie das Gert nicht ohne Aufsicht durch ein Kind verwenden. Lassen Sie kein Kind mit dem Gert oder einem Zubehrteil spielen, da Kleinteile verschluckt werden knnen. Bitte verwenden Sie ausschlielich Zubehr, das vom Hersteller bereitgestellt oder genehmigt wurde. Die Stromversorgung des Gerts muss den Anforderungen der Eingangsspannung des Gertes entsprechen. Bitte verwenden Sie ausschlielich den bereitgestellten berspannungsschutz an der Steckdose. Achten Sie vor dem Anschlieen oder Abziehen des Kabels darauf, dass Ihre Hnde vollstndig trocken sind. Erkundigen Sie sich bei Ihrer Stadtverwaltung, wie Sie das Gert umweltfreundlich entsorgen knnen Pappkarton, Kunststoffverpackung und Bauteile des Gertes knnen im Einklang mit den geltenden Vorschriften in Ihrem Land verwertet werden. Halten Sie stets die geltenden Vorschriften ein. Deren Nichtbeachtung kann eine Bue oder Verfolgung gem dem geltenden Recht nach sich ziehen Die durchgestrichene Mlltonne auf dem Gert bedeutet, dass das Gert am Ende seiner Nutzungsdauer zu einer speziellen Elektroschrottsammelstelle gebracht und vom Hausmll gesondert verarbeitet werden muss. Fehlerbehebung Die Einheit kann das Yealink Gert nicht mit Strom versorgen. Es gibt Probleme mit dem Steckeranschluss. 1. Reinigen Sie den Stecker mit einem trockenen Tuch. 2. Schlieen Sie ihn an einer anderen Steckdose an. Die Umgebungstemperatur liegt oberhalb des Betriebstemperaturbereichs. 1. Verwenden Sie die Einheit innerhalb des Betriebstemperaturbereichs. Das Kabel zwischen der Einheit und dem Yealink Gert ist nicht richtig angeschlossen. 1. Schlieen Sie das Kabel richtig an. Das Kabel lsst sich nicht richtig anschlieen. 1. Sie haben mglicherweise ein falsches Yealink Gert angeschlossen. 2. Verwenden Sie die richtige Stromversorgung. Es befindet sich mglicherweise Staub etc. im Port. 1. Reinigen Sie den Port. Setzen Sie sich bei weiteren Fragen mit Ihrem Hndler oder Ihrer anerkannten Servicestelle in Verbindung. Kontaktdaten des Ansprechpartners YEALINK NETWORK TECHNOLOGY CO., LTD. 309, 3rd Floor, No. 16, Yun Ding North Road, Huli District, Xiamen City, Fujian, VR China YEALINK (EUROPE) NETWORK TECHNOLOGY B.V. Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, Niederlande YEALINK (USA) NETWORK TECHNOLOGY CO., LTD. 999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA Hergestellt in China F R A N A I S Consignes de scurit Tempratures de fonctionnement ambiantes Temprature de fonctionnement : +14 122 F (-10 50 C) Humidit relative : 5 % 90 %, sans condensation Temprature de stockage : -22 +160 F (-30 +70 C) Garantie Notre garantie produit est limite lappareil lui-mme, lorsquil est utilis normalement selon le mode demploi et lenvironnement du systme. Nous ne sommes pas responsables des dommages ou pertes dcoulant de lutilisation de ce produit ou de toute rclamation dun tiers. Nous ne sommes pas responsables des problmes avec les appareils Yealink dcoulant de lutilisation de ce produit. Nous ne sommes pas responsables pour les dommages financiers, pertes de profits, rclamations de tiers, etc. dcoulant de lutilisation de ce produit. Symbole DC est le symbole de tension CC. Directive sur les substances dangereuses (RoHS) Ce dispositif est conforme aux exigences de la directive RoHS de lUnion europenne. Vous pouvez obtenir les dclarations de conformit en envoyant un message ladresse : support@yealink.com. Consignes de scurit Gardez ces instructions. Lisez ces consignes de scurit avant utilisation de lappareil !
Les prcautions de base suivantes doivent toujours tre suivies pour rduire le risque d'incendie, d'lectrocution et de blessures. Exigences gnrales pendant le fonctionnement. Avant dinstaller et dutiliser lappareil, lisez les consignes de scurit et observez la situation Lorsque lappareil est rang, transport ou utilis, veuillez le garder toujours propre et sec. Lorsque lappareil est rang, transport ou utilis, veuillez viter tout choc ou toute collision. Ne tentez pas de dsassembler vous-mme lappareil. En cas de mauvais fonctionnement, veuillez contacter le centre de service dsign. Sans consentement crit pralable, aucune organisation ou individu nest autoris apporter des changements la structure ou au dispositif de scurit de lappareil. Yealink nest en aucun cas responsable des consquences ou des problmesjuridiques causs par ces changements. Veuillez vous rfrer aux lois et rglements pertinents lorsque lappareil est utilis. Les droits lgaux des tiers doivent galement tre respects. Exigences environnementales Placez lappareil dans un espace correctement ventil. Nexposez pas lappareil la lumire directe du soleil. Gardez lappareil propre et sec. Placez lappareil sur une surface stable et plate. Veuillez ne placer aucun objet lourd sur lappareil risquant dentraner dgts et dformations. Maintenez une distance dau moins 10 cm entre lappareil et lobjet le plus proche afin que la chaleur Ne placez pas lappareil sur ou proximit de tout objet inflammable ou vulnrable au feu, comme Gardez lappareil loin de toute source de chaleur ou des flammes, comme une bougie ou un puisse se dissiper. des matriaux en caoutchouc. radiateur lectrique. Gardez lappareil loin de tout appareil lectromnager avec un fort champ magntique ou un champ lectromagntique, tel quun four micro-ondes ou un rfrigrateur. Exigences dutilisation dtouffement. Ne laissez pas des enfants utiliser lappareil sans surveillance. Ne laissez pas les enfants jouer avec lappareil ou ses accessoires pour viter tout risque Veuillez uniquement utiliser les accessoires fournis ou autoriss par le fabricant. Lalimentation de lappareil doit satisfaire aux exigences de la tension dentre de lappareil. Veuillez uniquement utiliser la prise protge contre les surtensions fournie. Avant de brancher ou de dbrancher tout cble, assurez-vous que vos mains sont compltement sches. Ne renversez aucun liquide sur le produit et nutilisez pas lquipement prs de leau, par exemple, prs dune baignoire, dun lavabo, dun vier, dans sous-sol humide ou prs dune piscine. Veuillez ne pas marcher sur, tirer sur, ou plier les cbles de lappareil, cela pourrait entraner son mauvais fonctionnement. En cas dorage, nutilisez pas lappareil et dbranchez-le de son alimentation. Dbranchez la prise dalimentation et lAsymmetric Digital Subscriber Line (ADSL) paire torsade (le cble de frquence radio) pour viter la foudre. Si lappareil reste inutilis pendant une longue priode de temps, dbranchez-le de lalimentation lectrique et dbranchez le cordon dalimentation. Si lappareil met de la fume, des odeurs ou bruits anormaux, dbranchez lappareil de son alimentation et dbranchez immdiatement le cordon dalimentation. Pour toute rparation, contactez le centre de service spcifi. Ninsrez aucun objet dans les fentes de lappareil ne faisant pas partie du produit ou nest pas un produit auxiliaire. Avant de brancher un cble, connectez dabord le cble de mise la terre du de lappareil. Ne dbranchez pas le cble de mise la terre jusqu ce que tous les autres cbles aient t dbranchs. Exigences de nettoyage Avant de nettoyer lappareil, arrtez de lutiliser et dconnectez-le de son alimentation. Utilisez un chiffon doux, sec et antistatique pour nettoyer lappareil. Maintenez la prise dalimentation propre et sche. Une prise sale ou humide peut causer des chocs lectriques et autres dangers. RECYCLAGE ENVIRONNEMENTAL Ne jetez pas cet appareil avec les dchets mnagers Contactez vos collectivits locales pour savoir comment l'liminer de faon cologique. La bote en carton, l'emballage en plastique et les composants de l'appareil peuvent tre recycls conformment la rglementation en vigueur dans votre pays. Respectez toujours la rglementation en vigueur Les personnes qui l'enfreignent sont passibles de poursuites judiciaires. Le symbole de poubelle barre appos sur l'appareil signifie que lorsque celui-ci a atteint sa fin de vie utile, il doit tre amen un centre de traitement des dchets spcial et trait sparment des dchets mnagers ordinaires. Dpannage Lunit ne peut pas alimenter le dispositif de Yealink. Mauvaise connexion avec la fiche. 1. Nettoyez la fiche avec un chiffon sec. 2. Branchez-la sur une autre prise murale. Lenvironnement dutilisation est hors de la plage de tempratures de fonctionnement. 1. Utilisez lappareil dans sa plage de tempratures de fonctionnement. Le cble entre lappareil et le dispositif Yealink est mal branch. 1. Branchez le cble correctement. Vous ne pouvez pas brancher le cble correctement. 1. Vous avez peut-tre branch le mauvais dispositif Yealink. 2. Utilisez une source dalimentation approprie. Le port contient peut tre de la poussire. 1. Nettoyez le port. Contactez votre revendeur ou un rparateur agr pour toute autre question. Informations de contact YEALINK NETWORK TECHNOLOGY CO.,LTD. 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, Chine YEALINK (EUROPE) NETWORK TECHNOLOGY B.V. Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, Pays-Bas YEALINK (USA) NETWORK TECHNOLOGY CO., LTD. 999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, tats-Unis Fabriqu en Chine Istruzioni di sicurezza Temperature ambiente di funzionamento Temperatura di funzionamento: Da -10 a 50 C (da +14 a 122 F) Umidit relativa: dal 5 al 90% non condensante Temperatura di conservazione: da -30 a +70 C (da -22 a 160 F) Garanzia La garanzia del nostro prodotto limitata allunit stessa, quando utilizzata normalmente in conformit alle istruzioni per il funzionamento e allambiente del sistema. Non ci assumiamo alcuna responsabilit di danni o perdite conseguenti alluso di questo prodotto o di eventuali reclami di terzi. Non ci assumiamo responsabilit di problemi relativi ai dispositivi Yealink con seguenti alluso di questo prodotto; non ci assumiamo responsabilit di economici, man cati profitti, reclami di terzi, ecc., conseguenti alluso di questo prodotto. Simbolo CC il simbolo della tensione CC. Direttiva RoHS (Restriction of Hazardous Substances) Questo dispositivo conforme ai requisiti della direttiva RoHS UE. possibile ottenere le dichi arazioni di conformit contattandoci allindirizzo support@yealink.com. Istruzioni per la sicurezza Conservare le presenti istruzioni. Prima delluso leggere queste istruzioni per la sicurezza!
Per ridurre il rischio di incendio, gravi lesioni alle persone o danni agli oggetti, leggere con at tenzione le seguenti istruzioni per la sicurezza, prima di usare il prodotto. Requisiti generali Prima di installare e usare il dispositivo, leggere con attenzione le istruzioni di sicurezza e osservare la situazione durante il funzionamento. Durante le procedure di archiviazione, trasporto e funzionamento, assicurarsi sempre che il dispositivo sia pulito e asciutto. Durante le procedure di archiviazione, trasporto e funzionamento, evitare la collisione e la caduta del dispositivo. riparazione. Non smontare il dispositivo. In caso di malfunzionamento, contattare il centro di assistenza per la Senza previo consenso, nessunorganizzazione o individuo pu effettuare modifiche alla struttura o al design di sicurezza del dispositivo. Yealink non sar ritenuta responsabile per conseguenze o problemi legali causati da tali modifiche. Fare riferimento alle norme e agli statuti durante luso del dispositivo. necessario rispettare anche i diritti legali degli altri. Requisiti ambientali Collocare il dispositivo in un luogo ben ventilato. Non esporre il dispositivo alla luce diretta del sole. Tenere il dispositivo asciutto e spolverato. Posizionare il dispositivo su una piattaforma piana e stabile. Si prega di non collocare oggetti pesanti sul dispositivo in caso di danni e di deformazioni causate da carichi pesanti. calore. materiali in gomma. Tenere almeno 10 cm tra il dispositivo e loggetto pi vicino, per consentire la dissipazione del Non collocare il prodotto sopra o vicino a oggetti infiammabili o sensibili al fuoco, come ad esempio Tenere il dispositivo lontano da fonti di calore e fiamme libere, come candele o termostati elettrici. Tenere il dispositivo lontano da elettrodomestici con un forte campo magnetico o elettromagnetico, come microonde o frigoriferi. Requisiti per il funzionamento Non consentire luso del dispositivo a un bambino senza supervisione. Non consentire a un bambino di giocare con il dispositivo o i suoi accessori, potrebbero essere ingoiati. Usare solo gli accessori forniti o autorizzati dal produttore. Lalimentazione del dispositivo deve rispondere ai requisiti del voltaggio dingresso del dispositivo. Si prega di utilizzare solo il dispositivo di protezione da sovratensione fornito. Prima di collegare o scollegare un cavo, accertarsi che le mani sia asciutte. Non versare liquidi o prodotti e non usare il dispositivo in prossimit dellacqua, ad esempio vicino a una vasca da bagno, lavabo, lavandino, cantina umida o vicino a una piscina. Non tirare, strappare o piegare eccessivamente i cavi in caso di malfunzionamento del dispositivo. In caso di temporale, smettere di usare il dispositivo e scollegarlo dallalimentazione. Scollegare la presa di corrente e il doppino della linea ADSL (il cavo di frequenza radio) per evitare fulmini. Se non si usa il dispositivo per un periodo di tempo prolungato, scollegarlo dalla corrente e staccare la spina. Se il dispositivo emette fumo, suoni o odori anormali, scollegarlo dallalimentazione e staccare la spina immediatamente. Contattare il centro di manutenzione per la riparazione. Non inserire nel dispositivo oggetti che non sono componenti dello stesso o di prodotti Prima di collegare un cavo, collegare prima il cavo di massa. Non scollegare il cavo di massa finch non sono stati staccati tutti gli altri cavi. ausiliari. Requisiti di pulizia Prima di pulire il dispositivo, arrestarne luso e scollegarlo dallalimentazione. Usare un panno morbido, asciutto e antistatico per pulire il dispositivo. Tenere la spina di alimentazione pulita e asciutta. Una spina di alimentazione sporca o umida pu causare scosse elettriche o altri rischi. AMBIENTE E RICICLAGGIO E S P A O L Non smaltire questo dispositivo con i rifiuti domestici Rivolgersi al comune di residenza per informazioni su come smaltirlo nel rispetto dell'ambiente. Il cartone e la plastica della confezione nonch i componenti del lettore devono essere riciclati rispettando la legislazione pertinente in vigore nel proprio Paese. Attenersi sempre alle norme vigenti Coloro che non rispettano tali norme potranno subire multe o essere perseguiti a norma di legge. Il simbolo del cassonetto barrato indica che al termine della sua vita utile il dispositivo dovr essere consegnato presso un centro di raccolta per rifiuti speciali e riciclato separatamente dai normali rifiuti urbani. Risoluzione dei problemi Lunit non riesce ad alimentare al dispositivo Yealink. Il collegamento con la spina non funziona. 1. Pulire la spina con un panno asciutto. 2. Collegarla a unaltra presa. Lambiente di utilizzo al di fuori dellintervallo di temperatura di funzionamento. 1. Utilizzare il dispositivo allinterno dellintervallo di temperatura di funzionamento. Il cavo tra lunit e il dispositivo Yealink collegato in modo errato. 1. Collegare il cavo correttamente. Non possibile collegare il cavo correttamente. 1. Potrebbe essere stato collegato un dispositivo Yealink sbagliato. 2. Utilizzare lalimentatore corretto. Potrebbe essere presente polvere o altro nella porta. 1. Pulire la porta. Contattare il rivenditore o il servizio di assistenza autorizzato per ulteriori domande. Informazioni di contatto YEALINK NETWORK TECHNOLOGY CO., LTD. 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, Repubblica Popolare cinese YEALINK (EUROPE) NETWORK TECHNOLOGY B.V. Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, Paesi Bassi YEALINK (USA) NETWORK TECHNOLOGY CO., LTD. 999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA Made in China About Yealink Yealink (Stock Code: 300628) is a global brand that specializes in video conferencing, voice communications and collaboration solutions with best-in-class quality, innovative technology and user-friendly experience. As one of the best providers in more than 140 countries and regions, Yealink ranks No.1 in the global market share of SIP phone shipments (Global IP Desktop Phone Growth Excellence Leadership Award Report, Frost & Sullivan, 2019). Technical Support Visit Yealink WIKI (http://support.yealink.com/) for firmware downloads, product documents, FAQ, and more. For better service, we sincerely recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues. YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD. Web: www.yealink.com Copyright2021 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.All rights reserved.
1 | Label and Label Location | ID Label/Location Info | 257.61 KiB | November 15 2021 |
WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5539308.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Shenzhen Accurate Technology Co., Ltd. Project No.: SZ1210713-52792E-RF FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925) LABEL AND LOCATION Page 1 of 1
1 | Agent Authorization Letter | Cover Letter(s) | 10.99 KiB | November 15 2021 |
WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5539303.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD. 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, China Tel: 86-592-5702000 Fax: 86-592-5702455 Email: chenjl@yealink.com FCC Authorization Date: 2021-07-31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:
We YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD., the undersigned, hereby authorizes Shenzhen Accurate Technology Co., Ltd. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co., Ltd. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:
Stone Lu Vice General Manager QA-FR-170-B 7/29/2014
1 | Confidential Authorization Letter | Cover Letter(s) | 170.60 KiB | November 15 2021 |
WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5539304.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD. 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, China Tel: 86-592-5702000 Fax: 86-592-5702455 Email: chenjl@yealink.com FCC Confidential Authorization Date: 2021-07-31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: T2C-SENSOR503 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD. hereby requests long-term confidential treatment of information accompanying this application as outlined below:
Block Diagram Schematics Operation Description As well as short-term confidential treatment of information accompanying this application for a period of 180 days after grant is issued as outlined below:
Internal Photos Users Manual External Photos Test Set-up Photos The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature Stone Lu Vice General Manager
1 | FCC BT Declaration Letter | Attestation Statements | 118.00 KiB | November 15 2021 |
WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5539305.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD. 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, China Tel: 86-592-5702000 Fax: 86-592-5702455 Email: chenjl@yealink.com Date: 2021-07-31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:
The RF chip, model EFR32BG22C224F512GM40-C, which installed in our product Room Sensor, Model: RoomSensor, FCC ID: T2C-SENSOR503, supports BDR (GFSK), EDR (/4-DQPSK, 8DPSK), BLE 1M and BLE 2M functions. For use in America and this chip will not support/enable BDR (GFSK), EDR (/4-DQPSK, 8DPSK) and BLE 2M. The BDR (GFSK), EDR (/4-DQPSK, 8DPSK) and BLE 2M function has been shielded by the manufacturer using the software. Sincerely, Signature:
Stone Lu Vice General Manager
1 | Test Setup Photos | Test Setup Photos | 181.71 KiB | November 15 2021 / May 14 2022 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2021-11-15 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2021-11-15
|
||||
1 | Applicant's complete, legal business name |
YEALINK (XIAMEN ) NETWORK TECHNOLOGY CO., LTD.
|
||||
1 | FCC Registration Number (FRN) |
0014702682
|
||||
1 | Physical Address |
309, 3rd Floor, No.16, Yun Ding North Road, Huli District
|
||||
1 |
309, 3rd Floor, No.16, Yun Ding North Road
|
|||||
1 |
Xiamen City, Fujian, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
b******@baclcorp.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
T2C
|
||||
1 | Equipment Product Code |
SENSOR503
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
S**** L********
|
||||
1 | Title |
Vice General Manager
|
||||
1 | Telephone Number |
86-59********
|
||||
1 | Fax Number |
86-59********
|
||||
1 |
c******@yealink.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/14/2022 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Room Sensor | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen Accurate Technology Co., Ltd.
|
||||
1 | Name |
L******** Z********
|
||||
1 | Telephone Number |
+86-7********
|
||||
1 |
q******@atc-lab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0020000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC