1 Instruction 1.1 Summary The W1DL is a wireless Skype phone which is composed of one base and one handset. The base is a high quality speaker phone, ideal for conference calls. The handset has blue backlighted graphic LCD. Both base and handset ring for incoming calls. You can make/receive a call via the handset without the limitation of USB cable, just like using a mobile phone. 1.2 Features 1. USB Wireless Phone for Skype 2. 2.4GHz ISM Band, suit for Europe, USA, Japan etc 3. Handfree with digital echo cancellation 4. Large graphic LCD with blue backlight 5. Review Skype contacts and call list on handset LCD 6. Both base and handset ring for all incoming calls 7. Multi-language caller ID display feature 8. Auto-select RF channel to improve the quality of voice 1.3 Technical Data Standby time: More than 100 hours Talk time: More than 10 hours Radio range: 50 meters (160 ft) Battery: 460mAh (Li-battery) 1 1.4 System Requirements 1. Windows 2000 or XP 2. 400MHz processor and free USB1.1 or USB2.0 port 3. 128MB RAM and 15MB free disk space 4. Any broadband connection or minimum 33.6 Kbps dialup 1.5 Package Contents 1. One handset 2. One base 3. One user manual 4. One installation CD 5. One USB cable 2 2 Using the USB Wireless Phone 2.1 Handsets Keypad Instruction Contacts
(1) Press to display the contacts list, press
to scroll the contacts list.
(2) Press to call the contact displayed on the LCD.
(3) Press to go back to ready.
(4) The contacts are sorted by the first character of their names. e.g. Pressing 5 ,you will see all contacts starting with J. Pressing the 5 for the second time, you can see all contacts starting with K. C: (1) Press to clear any number you input.
(2) Press to switch between the Tabs of the Skype software.
(3) During a call, you can press C to mute the microphone, press C again to disable mute.
: Up/Down
to scroll call/contact list and to adjust the
Press volume of speaker when talking. 3
: Dial/Answer
(1) Call out or answer a call. Speaker light:
(1) During a call via handset, pressing the Handfree key, the
(2) Press to put a call on hold, release the call by speaker light will flash. pressing again.
: Hang up
(1) End a call or refuse an incoming call.
(2) Press the key to go back to the previous menu.
: Press to input + at ready state, else input *.
(2) The speaker light will be on when Handfree function is active, otherwise it is off. Charge light:
(1) When the handsets battery is full, the light will be on.
(2) When the handsets battery is flat, the light will flash.
: Press to scroll ring style at ready state, else input #.
(3) When the handset is taken away from the base, the light is 0-9: Digital keys
(1) Press to input digital numbers.
(2) Press to send DTMF message while talking. 2.2 Base stations Instruction Handfree Key
(1) Press to active the Handfree function
(2) Press hold to register the handset. 4 off. 2.3 Hardware installation 2.3.1 Connecting your base to your PC Connect the base to the PCs USB port with USB cable. 2.3.2 Install Battery Please install the battery as the picture shows. The LCD shows
. If nothing is shown, please place the handset on the base, the battery will be charged. 5 Create a Skype account as shown below:
2.3.3 Register Handset to the base If the LCD shows registered to the base .Please do the following steps:
, that indicates the handset has not
(1) Press and hold the C key on the handset (approx.3 secs.) until three beelines is displayed on the LCD.
(2) Press and hold the Handfree key (approx.3 secs) until the
. That indicates the handset has been LCD shows registered to the base. 2.4 Run Skype
(1) Download Skype software and install it (www.skype.com). The version must be 1.0.0.106 or higher.
(2) Run Skype and log in with Skype account. 6 After software startup, the icon will appear to the system tray as shown below:
That indicates the Skype are successfully connected to Internet.
, you have to check your Internet If the icon is shown as connection. 2.5 Run SkypeMate 2.5.1 Install SkypeMate Insert SkypeMate installation CD or download SkypeMate software, then install it. 7 2.5.2 Run SkypeMate Double-click the icon will pop up the window as shown below:
on the desktop, the Skype program Select the first option Allow this program to use Skype, click OK button. Note: If you selecte the wrong option, you can make another selection. Please see 3 FAQ /problem5 for detail. After running SkypeMate, the icon will appear to the system tray as shown:
That indicates the device and Skype are connected successfully. If the icon shown as grey), please run Skype first.
(the phone is green and the outside is
(the phone is red and the outside is If the icon shown as green), it means USB Wireless Phone is connected incorrectly. Please reconnect USB Wireless Phone to PC. 2.6 Make a Call 2.6.1 Call Skype user from contacts
(1) Press
(2) Press
(3) Press to display contacts.
to call out. to select a contact. 2.6.2 Call Skype user from PC Contacts
(1) Go back to ready, press C to switch to Contacts Tab.
(2) Press
(3) Press
to call out. to select a contact. to display the call list. again to select a contact. 2.6.3 Call Skype user from call list
(1) Go back to ready state, press
(2) Press
(3) Press 2.6.4 Call Skype user by Speed-Dial
(1) Add a friend (for example: bbc456) to Contacts
(2) Assign Speed-Dial for it, for example "11"
to call out. 8 9 2.6.6 Activate Handfree while making a call
(1) Enter the number on the handsets keypad and press to call out.
(2) Press the Handfree key, the speaker light will flash.
(3) Place the handset on the base.
(4) The speaker light will be turn on.
(5) Press the Handfree key to end talking. 2.7 Answer a call 2.7.1 Answer a call via handset When a call comes in, both of the base and the handset will ring. Press 2.7.2 Answer a call via base
(1) When a call comes in, both the base and the handset will to answer the call, or press to refuse it. ring. Press Handfree key to answer the call.
(2) Press Handfree key again to end the call. 11
(3) Input number and call out:
Press digital "11" on the handsets keypad, then press call out. to 2.6.5 Call to regular phone Press "00" + "country number" + "phone number", then press
. Example: call someone in Beijing, China, please press 00861012345678, and then press
. 0086 10 12345678
country code city code destination number Note: (1) You can input + instead of 00.
(2) If you want to use this function, you should buy SkypeOut Credit from www.skype.com first. 10 2.8 State Instruction
(1) Ready state a. Skype online b. Skype offline c. Missed call 2.9 Advanced
(1) Right click the icon
(2) The window is shown as below:
on the taskbar and select Advance
(2) The icons displayed in call list a. Incoming call b. Outgoing call c. Missed call
(3) Battery condition
(4) The icons displayed in contacts a. Online b. Offline c. SkypeOut 12
(3) Run when Windows starts: Select to enable this feature. The SkypeMate will be launched automatically when Windows starts.
(4) Refuse Skype call when Skype talking: Select to enable this feature. The second incoming Skype call will be refused when talking.
(5) Display Skype window when calling (see the picture in next page): If you cancel this option, when you press the digital keys 0-9, *, #, the Skype windows will not pop up
(except incoming call and outgoing call).
(6) Click the button OK to save the setup. 13 2.10 Auto-select RF channel This function is effective to improve the quality of handsets voice. The handset will change the RF channel automatically when the voice is not so good.
(1) Right click the icon
(2) The window is shown as below:
on the taskbar and select Advance
(2) The window is shown as below:
(3) Enter the number from the PCs keypad. Note: The USB Wireless Phone used in one room should use different channel, please make sure to select a channel which is not used by other USB Wireless Phone.
(3) Select Auto selection RF Channe to enable this function.
(4) Click the button OK to save the setup. 2.11 Select RF channel by manual If there is more than one USB Wireless Phone in the room, and the quality of the voice is not so good, please select the RF channel by manual.
(1) Right click the icon on the taskbar and select Advance.
(4) Click the button OK to save the setup. 14 15 3 FAQ Problem 1 There is no ring can be heard or the ring tone is too low. Solution
(1) Go to Skype, run Tools-> Options->Sounds, select Play sound. Shown as below:
(2) Click Import Sounds. Go to the Skypemate folder, for example: C:\\program\skypemate. Open mySkypeRing.wav
(3) Select ringtone at the When box which is on the top of the window
(4) Select Play sound, which is under the When box
(5) Select mySkypeRing at the box beside Play sound
(6) Click the Save button to save and end the setting. 16 Problem 2 I am not able to hear any sound through the earphone?
Solution Please execute the Control Panel->Sound and Video (
->Audio, set Sound Playback and Sound Recordings preference device to your sound card. See below:
) Problem 3 I cant play music through the USB Phone?
Solution Please execute the Control Panel->Sound and Video (
->Audio, set Sound Playback and Sound Recordings preference device to USB Audio Device.
) 17 Problem 4 The voice is played from the PCs sound card instead of the USB Wireless Phone when I make/answer a call?
Solution Execute Tools->Options->Sound Devices to open the window as below:
Set Audio In and Audio Out to USB Audio Device. Problem 5 Skype is running, but the icon of SkypeMate still show as
(the phone is green and the outside is grey)?
Solution You have selected the wrong option, go to Skype, execute choose Tools-> Options-> Privacy-> Manage other programs access to Skype, choose the needed option, click Change button to open the Manage API Access Control windows, and make another selection. Problem 6 The base is running, but the phones keypard is invalid. Solution Please register the Handset to the base. See 2.3.3 Registration Handset to the base. 18 19 in a interference CE Mark Warning:
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following 20 measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. the Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modification made to this equipment not expressly approved by the manufacturer. May void the FCC authorization to operate this equipment. 21 PROTECTION OF THE ENVIRONMENT / DISPOSAL OF THE EQUIPMENT Do not on any account put your old equipment out with the domestic refuse. For the sake of the environment, please use your local authoritys collection point set to return and recycle old electric and electronic equipment. You can find out which recycling firm is responsible for your neighbourhood by contacting your local authority. Batteries must not be put in the domestic refuse either!
All consumers have a statutory duty to take all batteries to a collection point in their municipality / district or to a retail store so that they can be disposed of in an environmentally-friendly way. regardless of whether they contain toxic substances. All batteries should be fully discharged before they are returned for disposal. Y-W1DL-Ver1.1 2006-11-30 22