2.4G BK 1 VIog type-c APP TX RX 2 3S type c
oppo\vivo\iqoo\
Realme OTG 5V\1A OTG APP APP 10 10 K K type c
type c ENC 3
(a)
(b)
(c)
(d) 0C 35C 70 RH
(e)
OTG 20
(f )
(g) 4
1 2 Type c 3 4 2.4G wireless microphone for radio Product Instruction Manual (LJM001) 1Product presentation The product is smart wireless microphone, which can provide professi onal le vel recording output; Plug and play, no APP needed; Multiple uses: it can be used in network broadcast, video VIog shooting, program interview, interview recording, vi d eo teach ing and othe r occasi ons. Wireless microphone consists of two parts:
microphone transmitter end, Type - C receiver end. (As shown below) 2Usage of application Long press the transmitter button for 3S to start up, and the green light ashes at this time;
Then the receiver Type-C is connected to the mobile phone, and the red light ashes at this time;
Connect the transmitter and receiver for automatic pairing. The green light will turn to long light after the transmitter is paired well, and the red light will turn to long light after the receiver is paired well, i n d i c a t i n g t h a t t h e c o n n e c t i o n i s successful, and the normal use can be achieved. (note: oppo\vivo\iqoo\Realme brand mobile phone should search OTG in the Settings, turn on OTG power supply to normal use;) I n an o p e n e n v i ro n me n t , w i t h a distance of 10 meters, you can open the phone camera, live video and other apps to conduct interviews, live broadcast, karaoke, short video recording and other microphone radio;
When the transmitter battery is about to run out of power, the green light will turn to fast ashing. At this time, please connect the external power supply or the charging treasure (5V\1A) to charge it and then use it. There is no battery in the receiver Type-
C, so it does not need to be charged during live broadcast. When the receiver is used for live broadcast and the mobile phone is low in power, the mobile phone can be charged through the interface of type-C at the receiving end, that is, the f unct ion of ch argi ng wh ile us in g is completed. When the product is in use and the external environment is relatively noisy, you can press the transmitter button once. At this time, the green light changes to the blue light, and the main tone ENC function is turned on to ensure the speaker's voice is clear.
(a)Do not block the receiver with hands or foreign objects to keep the signal stable.
(b) Some Android phones cannot be paired and used when the receiver is plugged in, so you need to turn on the OTG mode in the phone Settings.
(c)Do not disassemble, vigorously knock or cut the product
(d)Please use the product at ambient temperature 0C--35C, relative humidity 2 0 % - 7 0 % R H , a n d k e e p a w a y f r o m humidity, h igh temperature and re source
(e)Do not wrap or cover the product with a n y o b j e c t d u r i n g c h a r g i n g a n d discharging to ensure ventilation and heat dissipation.
(f )The product contains batteries, do not put the machine in water or near high t e m p e r a t u r e , d o n o t d i s a s s e m b l e , impact, squeeze or put into re
( g ) I f t h e p ro d u ct c a n n ot b e u s e d normally, please contact the company, by professional technical personnel to deal with
TX RX 3Notes Receiver indicator Type-C Type-C interface Lanyard hole O button Type-c Receiver Type-c charging interface Microphone indicator Type-c Microphone Type-c charging interface microphone clip sound hole 4Packing list Contents of packing List:
(1) Microphone TX;
(2) Type c RX;
(3) user manual;
(4) annelette bag;
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID: 2A6RY-LJM001