User Guide: GVT-1000 Release 1.0 SkyGuard, LLC (NY) 801 Motor Parkway Suite 200 Hauppage, NY 11788 www.skyguard.com Confidential and Proprietary 2008 SkyGuard, LLC User Guide ____________________________________________________________________________________ Table Of Contents 1 Introduction. 1 About This Manual. 1 About the GSM/GPRS GVT-1000 1 Contents of Basic Package.. 2 GVT-1000 Front/Back View. 2 Technical Specification for GVT-1000 . 3 Installation Guide.. 5 Welcome.. 5 Component List.. 5 Installation Instructions 5 Cautions. 5 Red - Constant Power (Required). 6 Fuse Block 6 Ignition Harness/Vehicles Battery.. 6 Black Ground (Required). 6 Yellow Key On and Crank (Recommended). 6 GPS Antenna Installation. 6 LED Indicators.. 7 SkyGuard Wiring Diagram.. 8 1.1 1.2 1.3 1.4 1.5 2.1 2.2 2.3 2.5 2.6 2.6.1 2.6.2 2.7 2.8 2.9 2.10 2.11 2 Confidential and Proprietary 4/9/2008 User Guide ____________________________________________________________________________________ General Every effort has been made to ensure the accuracy of all material provided in this document. However, SkyGuard products are continually undergoing on-going product development to improve and enhance the product. SkyGuard, LLC may revise products and offerings at any time without prior notice. The SkyGuard product provided to customer may be used only in conjunction with its lawful and intended use approved by SkyGuard, LLC as contemplated in the SkyGuard sales and marketing materials. Customer shall use only those Devices and Accessories approved by SkyGuard for use on the wireless messaging networks through which the services are provided. Copyright The names, logos, and taglines identifying SkyGuard, LLCs products and services are proprietary marks of SkyGuard, LLC or its affiliates. Images, text, and other materials found in this document are protected by United States copyright laws. Reproduction of this material is strictly prohibited, without the express written consent of SkyGuard, LLC. All other trademarks and service marks are the property of their respective owners. 2008 SkyGuard, LLC. All rights reserved. SKYGUARD, the SKYGUARD logo are registered trademarks of SkyGuard, LLC. Subject to U.S. Patents Pending. Confidential and Proprietary 4/9/2008 User Guide ____________________________________________________________________________________ Regulatory Compliance FCC The GVT-1000 has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 Subpart B of the FCC rules. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help. Disclaimer SkyGuard disclaims all responsibility for any act or omissions, or for breach of law, code or regulation, including local or state codes, performed by a third party. SkyGuard strongly recommends that all installations, hookups, transmissions, etc., be performed by persons who are experienced in the fields of radio frequency technologies. SkyGuard acknowledges that the installation, setup and transmission guidelines contained within this publication are guidelines, and that each installation may have variables outside of the guidelines contained herein. Said variables must be taken into consideration when installing or using the product, and Enfora shall not be responsible for installations or transmissions that fall outside of the parameters set forth in this publication. SkyGuard shall not be liable for consequential or incidental damages, injury to any person or property, anticipated or lost profits, loss of time, or other losses incurred by Customer or any third party in connection with the installation of the Products or Customer's failure to comply with the information and instructions contained herein. Warning In order to comply with RF exposure limits established in the ANSI C95.1 standards, it is recommended when using SkyGuard GPS/ GSM Tracking Device that the device is positioned more than 20 cm distance from your body or nearby persons during extended periods of transmitting or operating time. If the device is positioned less than 20 cm distance from the user, it is recommended that the user limit exposure time. Confidential and Proprietary 4/9/2008 User Guide ____________________________________________________________________________________ Warranty Scope SkyGuard, LLC warrants that each Device will be free from defects in design, materials and workmanship so long as the customer is not in default and has an active service account with SkyGuard, LLC in good standing for as long as continuous service is active on the device. Such warranty shall obligate SkyGuard, LLC to repair or replace and return the device, at no charge to Customer, Devices determined to have defects subject to SkyGuard LLCs warranty obligations; provided, that SkyGuard, LLC shall not be responsible for the cost of repair or replacement of Devices due to negligence, accidental or intentional damage, misuse or abuse. Devices shall be returned to SkyGuard, LLC for inspection. Hardware Customer shall use only those devices and accessories approved by SkyGuard for use on the wireless messaging networks through which the services are provided. Customer shall be solely responsible for installation of the Devices and Accessories. Software All rights in the Software, including without limitation any patents, copyrights and any other intellectual property rights therein, will remain the exclusive property of SkyGuard, LLC and/or its licensors. Customer agrees that the Software is the proprietary and confidential information of SkyGuard, LLC and/or its licensors. Except to the extent otherwise expressly agreed by the parties in writing, SkyGuard, LLC has no obligation to provide maintenance or other support of any kind for the Software, including without limitation any error corrections, updates, enhancements or other modifications. This Agreement does not include the right to sublicense the Software. The license to use the Software granted herein is personal to Customer, and, therefore, may not be assigned (by operation of law or otherwise) or transferred without the prior written consent of SkyGuard, LLC. Disclaimer of Warranties and Limitation of Liabilities SKYGUARD MAINTAINS RELATIONSHIPS WITH MULTIPLE THIRD PARTY NETWORK PROVIDERS TO OFFER ITS CUSTOMERS THE MOST ROBUST SERVICES AVAILABLE. THIS COLLECTION OF NETWORKS SHALL BE REFERRED TO HEREIN COLLECTIVELY AS THE SKYGUARD NETWORKS. CUSTOMER ASSUMES RESPONSIBILITY FOR THE SELECTION OF THE SERVICE TO ACHIEVE ANY INTENDED RESULTS, AND FOR THE PROPER INSTALLATION, USE, AND RESULTS OBTAINED BY THE SERVICE, DEVICES AND ACCESSORIES. CUSTOMER ALSO ASSUMES FULL RESPONSIBILITY FOR THE CONSEQUENCES RESULTING FROM SKYGUARD, LLCS PERFORMANCE OF FUNCTIONS REQUESTED BY CUSTOMER OR A USER OF CUSTOMERS SERVICE ACCOUNT IN CONNECTION WITH SKYGUARD REMOTE ASSISTANT SUPPORT SERVICE. CUSTOMER HAS THE SOLE RESPONSIBILITY FOR INSPECTING AND TESTING THE SERVICE TO CUSTOMERS SATISFACTION BEFORE USING Confidential and Proprietary 4/9/2008 User Guide ____________________________________________________________________________________ THE SERVICE. THE SERVICE IS PROVIDED TO CUSTOMER ON AN AS IS AND AS AVAILABLE BASIS. EXCEPT AS OTHERWISE EXPRESSLY SET FORTH HEREIN, SKYGUARD, LLC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, CONCERNING THE SERVICES, THE DEVICES, THE ACCESSORIES, THE SOFTWARE OR THE WIRELESS MESSAGING NETWORKS THROUGH WHICH THE SERVICES ARE PROVIDED, AND HEREBY EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY, DURABILITY, PERFORMANCE AND QUALITY, AND ANY WARRANTY OF FITNESS FOR A PARTICULAR USE OR PURPOSE, TITLE OR NONINFRINGEMENT OF THIRD PARTY RIGHTS. Under no circumstances shall SkyGuard, LLC be liable to Customer or any other person for any loss, injury or damage, of whatever kind or nature, resulting from or arising out of (i) any mistakes, errors, omissions, delays or interruptions in the receipt, transmission or storage of any data, signals or information arising out of or in connection with use of the Services, the Software and/or SkyGuard Networks, or (ii) SkyGuard, LLCs actions or inactions in performing the functions requested by Customer or a user of Customers Service account in connection with SkyGuard Remote Assistant support service, or for SkyGuard, LLCs inability to perform such functions. SKYGUARD, LLC SHALL NOT BE LIABLE TO CUSTOMER OR ANY OTHER PERSON FOR ANY INDIRECT, CONSEQUENTIAL, EXEMPLARY, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, LOSS OF USE OR LOST BUSINESS, REVENUE, PROFITS, GOODWILL OR ANY OTHER PECUNIARY LOSS, ARISING OUT OF OR RELATED TO THIS AGREEMENT, THE SERVICES, THE DEVICES, THE ACCESSORIES, THE SOFTWARE AND/OR THE INTENDED USE THEREOF, OR THAT RESULT FROM OR ARISE OUT OF ANY MISTAKES, ERRORS, OMISSIONS, INTERRUPTIONS, DEFECTS, DELAYS IN OPERATION, OR TRANSMISSION, OR ANY FAILURE OF PERFORMANCE, UNDER ANY THEORY OF TORT, CONTRACT, WARRANTY, STRICT LIABILITY OR NEGLIGENCE, EVEN IF SKYGUARD, LLC HAS BEEN ADVISED, KNEW OR SHOULD HAVE KNOWN OF THE POSSIBILITY OF SUCH DAMAGES. WITHOUT LIMITING ABOVE, THE TOTAL LIABILITY OF SKYGUARD, LLC TO CUSTOMER IN CONNECTION WITH THIS AGREEMENT SHALL BE LIMITED TO THE LESSER OF (1) DIRECT DAMAGES PROVEN BY CUSTOMER OR (2) THE AGGREGATE AMOUNTS PAID BY CUSTOMER TO SKYGUARD, LLC UNDER THIS AGREEMENT FOR THE ONE (1) MONTH PERIOD PRIOR TO THE ACCRUAL OF SUCH CAUSE OF ACTION FOR THE SPECIFIC PRODUCT OR SERVICE WHICH FORMS THE BASIS FOR SUCH CAUSE OF ACTION. THE FOREGOING LIMITATION SHALL APPLY TO ALL CAUSES OF ACTION AND CLAIMS, INCLUDING, WITHOUT LIMITATION, BREACH OF CONTRACT, BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY, MISREPRESENTATION AND OTHER TORTS. CUSTOMER ACKNOWLEDGES THE REASONABLENESS OF THE FOREGOING DISCLAIMERS AND LIMITATIONS OF LIABILITY. NO CAUSE OF ACTION UNDER ANY THEORY WHICH ACCRUED MORE THAN ONE (1) YEAR PRIOR TO THE INSTITUTION OF A LEGAL PROCEEDING ALLEGING SUCH CAUSE OF ACTION MAY BE ASSERTED BY CUSTOMER AGAINST SKYGUARD, LLC. Governing Laws This agreement shall be governed by and construed in accordance with the laws of the State of Delaware without giving effect to any conflicts of law principles. If any provision of this agreement is determined to be unlawful, void or for any reason unenforceable, then that provision shall be deemed severable from this agreement and shall not affect the validity and enforceability of any remaining provisions. Confidential and Proprietary 4/9/2008 User Guide ____________________________________________________________________________________ 1 Introduction 1.1 About this Manual Instructions on how to install the GVT-1000 are contained in this manual. Please follow installation tips and instructions closely to avoid personal injury or damage to the GVT-
1000 . 1.2 About GSM/GPRS GVT-1000 GVT-1000 GPS Unit wirelessly transmits location, peripheral, and vehicle control data to a data center. Location data, including speed, direction, mileage, and altitude, is provided by an onboard GPS module/chipset. Wireless transmission is achieved using an onboard GSM/GPRS module/chipset. A microcontroller is used to poll location and command data at regular intervals, derive actions based on location, peripheral, and control data, and execute those actions. GPS module, Wireless module, and microcontroller could potentially reside in the same silicon. Peripheral data indicates the status of the various peripherals that are connected to and/or controlled by the unit. Peripherals include, but not limited to, door locks/un-locks , starter interrupt, ignition, battery, engine, panic button, and collision detector. Firmware on the device applies intelligent filtering to overcome coverage limitations for both GPS and GSM/GPRS networks. Motion sensor is used to control the status of the unit, either sleep, idle, or full power, there by controlling the amount of current the unit consumes. Backup battery and tamper sensing GPS Antennas are primarily used to indicate loss of Main Power and loss of GPS antenna connectivity. An internal wireless/cellular antenna is used for easy installation. Device communicates using SMS, TCP or UDP communication protocols. SMS and UDP are the most common protocols used in our deployments. Device supports Over-the-air firmware upgrade to deliver added functionality without physically touching the device once installed. Confidential and Proprietary 1 4/9/2008 User Guide ____________________________________________________________________________________ 1.3 Contents of Basic Package GVT-1000 Device Installation Guide GPS Antenna Power Cable Internal Back-up battery SIM Card 1.4 GVT-1000 Front/Back View Front View Back View Confidential and Proprietary 2 4/9/2008 User Guide ____________________________________________________________________________________ 1.5 Technical Specification for GVT-1000 CHARACTERISTICS Dimensions ( L x W x H) 92x62x30mm ( preliminary ) Housing Construction Plastic ( Ill check for material type Radio Performance and name ) GSM Module Siemens Model # MC56 FCC ID number QIPMC56 Frequency (MHz) 850//1800/1900 Transmit Power 1W/1900Mhz, 2W/850MHz GSM Functionality / GPRS GPRS Mode MultiSlot Class 10 , Mobile Station Class B GPRS Coding Scheme CS1,CS2,CS3 and CS4 GSM Antenna Build In ( Internal GSM Antenna ) GPS Functionality Receiver uBlox , 16 Channel Antaris 4 SuperSense Chipset Sensitivity ( Tracking ) -158dBm Antenna Type External GPS Active Antenna , 3.3V Connector SMA Female GPS Protocol NMEA , UBX, RTCM Onboard Components MCU 8-bit Microcontroller Memory EEPROM 512Kbit Motion Sensor Mechanical Type Led Indicator 2 , Green ( GSM status ) , Red ( GPS SIM Card/Interface I/O status ) SIM Access Internal (secure behind battery cover) I/O Connector 16 pin Serial Data I/O RS-232 ( Optional ) Inputs 3 Outputs 4 Environment Operating Temperature -20oC to +70oC ( based on MC56 spec ) Confidential and Proprietary 3 4/9/2008 User Guide ____________________________________________________________________________________ Power DC Voltage Supply Power Consumption
(Without Charging Battery ) 10 ~ 30V DC Full Power mode : avg 80mA Idle Mode : avg 35mA Sleep Mode : avg 4 mA Aprx xx Hrs in Idle mode operation
( avg xx mA) ( TBD ) Aprx xx Hrs operation in sleep mode
( avg xx mA) ( TBD ) FCC Yes PTCRB Yes US Carrier Yes Certifications Confidential and Proprietary 4 4/9/2008 Installation Guide User Guide ____________________________________________________________________________________ 2 2.1 Welcome It is very important that you familiarize yourself with these installation instructions before attempting to install your device. The instructions provided here are only a guide and do not necessarily apply to your particular vehicle. 2.2 Component List GVT-1000 Device Installation Guide GPS Antenna Power Cable Internal Back-up battery SIM Card 2.3 Installation Tips Antenna placement in vehicles with metallic coating or film on windshield may require alternate site placement such as outside the passenger compartment. Use pull ties, fastener screws, Velcro, or the device mounting plate (included) to install the SkyGuard device inside the vehicle passenger cab. Do not install the device inside the engine compartment. All excess wiring should be neatly coiled and stored so that it is not crimped or rubbing against metal or moving parts or interfering Any unused wires should be properly taped or capped so that they do not come into contact with one another, any metal or sharp surfaces or other vehicular electrical sources. Once power and antenna are connected, LED indicators should indicate cellular and GPS lock. Note: GPS performance is severely reduced when vehicle or GPS antenna is located inside metal structures. We recommend testing outside garage/service bays for GPS lock. 2.4 Installation Instructions The following describes installation steps required for installation. Basic knowledge of automotive electrical systems and functional components is needed in order to successfully install your SkyGuard device. If you are not a qualified automotive electrical technician or do not feel comfortable performing this installation, we strongly recommend that you work with a trusted automotive professional in your area to install SkyGuard according to your needs. 2.5 Cautions Improper installation of electrical components and any resulting damage may impact your vehicle warranty. SkyGuard, LLC will not be responsible or liable for any damage, injury or other loss suffered as a result of installations covered by these instructions. Confidential and Proprietary 5 4/9/2008 User Guide ____________________________________________________________________________________ The cable shipped with your device includes an in-line fuse holder and a 3-amp fuse. The fuse should be removed from the fuse holder before the install process and should not be replaced until everything else has been installed, the cable is connected to the device, and you are ready to use the device. Installing the fuse should be your last step to complete the installation. 2.6 Red - Constant Power (Required) Locate a suitable 12 or 24 volt constant power source. Acceptable sources for power are:
The fuse block, ignition harness or vehicles battery. Fuse Block: If you choose to get power from the fuse block on your vehicle, you can use a fuse tap and a female quick disconnect. The fuse tap must be installed on the hot side of the fuse. To find the hot side of the fuse, remove the existing fuse from the fuse block and use a test meter to probe the fuse socket. The side that shows 12 or 24 volts DC is the hot side of the fuse where you should insert the fuse tap. Ignition Harness/Vehicles Battery: If you choose to get power directly from the battery or another wire on the vehicle be sure to use a suitable connector or splice method (such as soldering) to ensure a permanent connection. The device will not work without power. 2.7 Black - Ground (Required) Locate a suitable area for grounding the device that is free from paint, dirt and grease. Securely fasten the black wire from the cable to the ground source using a suitable crimp terminal. 2.8 Yellow - Key On and Crank (Recommended) This installation is recommended for more accurate trip information. Locate a key on and crank power source using a test meter. Connect the yellow wire from the cable to this power source. This wire should test hot is both on and start positions. Note: Most vehicles include a number of sources for Constant Power, Ground, and Key On power under the dash. It is up to the installing technician to choose the best sources for the particular vehicle. 2.9 GPS Antenna Installation Depending on the type of antenna provided, locate a suitable place on your vehicle to install the antenna. For optimal performance, the GPS antenna should be mounted under the top of the dash pad without being obstructed by any metal. While you can mount the antennas elsewhere, performance may suffer as a result. Please ensure that the non-magnetic side has unobstructed view of the sky. Any metal construction will restrict or diminish GPS reception. Make sure there is sufficient cabling to reach from the point of the antenna mount back to the point where you have installed the SkyGuard device. Conceal any excess cable under the carpet, trim, or dash so it will not be exposed to wear. Be careful not to crimp or kink the cable as this may damage the antenna or reduce its effectiveness. Confidential and Proprietary 6 4/9/2008 User Guide ____________________________________________________________________________________ 2.10 LED Indicators Two LED's are mounted on the end of the device. Green (Power and GSM) This LED will steadily illuminate when a good power and ground source is attached to the device and registered to the GSM network. Red (GPS) This LED will steadily illuminate when the device acquires a GPS lock. Confidential and Proprietary 7 4/9/2008 User Guide ____________________________________________________________________________________ 2.11 SkyGuard Wiring Diagram GPS Antenna Device Dimensions 3.86x 2.28x 1.25 Wire Legend Battery (12 Volts) Ground ACC (Ignition Sense) Starter Disable (Relay -) Starter Disable (Relay + with EMF Protection) Red Black Yellow Orange Orange with White Stripe Battery Confidential and Proprietary 8 4/9/2008