User Guide YS3603-UC YoLink Remote Contents Introduction 1 Features 2 2 Device Supported YoLink Control Maintaining the YoLink Remote 3 5 Specications7 Customer Ser vice and Warranty 8 Introduction With YoLink Remote, you can custom grouping plugs, switches, and outlets and control them by one button. No hub or internet is required. LED lights can show you the current status. See the explanation below:
ON ALL ON OFF ALL OFF BATTERY COVER Green Once Trigger an action. Fast Blinking Green Set up connection with devices. Fast Blinking Red Remove connection with devices. Blinking Red and Green Factory resetting. 1 Features YoLink Control - No internet is required, turn on or off your YoLink devices after you set up your devices with the remote. Long Range - Up to 500 Feet between remote and device. Devices Supported YS6602-UC YoLink Plug YS6604-UC YoLink Plug Mini YS5705-UC In-wall Switch YS6704-UC In-wall Outlet YS4907-UC Gas/Water Valve YS6801-UC Smart Power Strip YS6802-UC Smart Switch Continuously updating
.. 2 YoLink Control YoLink Control is our unique device to device control technology. Under YoLink Control, the devices can be controlled without internet or Hub. Device which send out command is called controller(Master). Device which receive command and act accordingly is called responder(Receiver). Controller and responder list will show you below. You will need to set it up physically. Pairing Find a YoLink remote as controller(Master). Hold any ON button for 5-10 seconds, the light will ash green quickly. Find an action device as responder(Receiver). Hold the power/set button for 5-10 seconds, the device will enter the pairing mode. After pairing succeed, the light will stop ashing. When press the ON button or ALL ON button on the remote, the action device will turn on. When press the corresponding OFF button or ALL OFF button on the remote, the action device will turn off. ON 3 Un-pairing Find the controller(Master) YoLink remote. Hold the OFF button for 10-15 seconds, the light will ash red quickly. Find the responder(Receiver) action device. Hold the power/set button for 10-15 seconds, the device will enter the un-pairing mode. The above two devices will unpair by themselves and the light stops ashing. After unbundling, all the control buttons of YoLink Remote will no longer change status of the action device. OFF 4 Maintaining the YoLink Remote Factory Reset Factory reset will erase all your settings and bring it back to default, which will remove all the connections with your pairing devices. Hold the ALL ON button for 20 seconds until the LED blinks red and green alternately. Factory reset will be done when the light stops ashing. ALL ON 5 Battery Replace When no action triggers on the pairing devices or no light when press the button on remote, please replace the battery. Note Replace all your original batteries with new ones. BATTERY COVER 6 Specications Voltage:
3V DC (2 - AAA Battery) Environment:
Working Temperature: 0C~40C (32F~104F) Working Humidity: 10%~90% non-condensing 7 If you are unable to get your remote working Please contact Our Customer Service during business hours US Live Tech Support: 1-844-292-1947 M-F 9am - 5pm PST Email: [email protected] YoSmart Inc. 17165 Von Karman Avenue, Suite 105, Irvine, CA 92614 WARRANTY 2 Year Limited Electrical Warranty YoSmart warrants to the original residential user of this product that it will be free from defects in materials and workmanship, under normal use, for 2 year from the date of purchase. User must provide a copy of original purchase receipt. This warranty Does Not Cover abuse or misused products or products used in commercial applications. This warranty does not apply to remotes that have been improperly installed, modied, put to a use other than designed, or subjected to acts of God (such as oods, lightning, earthquakes, etc.). This warranty is limited to repairing or replacing of this remote only at YoSmart's sole discretion. YoSmart will NOT be liable for the cost of installing, removing, nor reinstalling this product, nor direct, indirect, or consequential damages to persons or property resulting from the use of this product. This warranty only covers the cost of replacement parts or replacement units, it does not cover shipping & handling fees. To implement this warranty please give us a call during business hours at 1-844-292-1947, or visit www.yosmart.com. REV1.0 Copyright 2019. YoSmart, Inc. All rights reserved. 8 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment. Such modications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
