FCC ID: 2A4VO-REMOTE Remote Controller

Common push-pull cover remote control related parameters:

(fixed code, learning code, rolling code, dial code at each frequency, copy) 1. Working voltage: DC12V (one 23A battery) 2. Working current: 8mA 3. Working frequency: 315 (330 350 390 430 418 433 and other special can be customized) 4. Modulation method: ASK (amplitude modulation) 5. Transmitting power: 100mW 6. Launch distance: 50 ~ 150m (open space) 7. Encoding type: 2262 (learning code EV1527 rolling code HCS301 dial code copy type) 8. Dimensions: 623912mm 9. Working temperature: -10+50 10. Self-test: with low-voltage detection function, when the battery supply voltage is low, the indicator light will not light, which proves that the battery needs to be replaced 11. Appearance color:

emerald, blue, matte black, glossy black. red mahogany, golden mahogany, pearl white, rolling shutter doors of garages, 12. Product use:

retractable gates, LED lamps, LED special flashing lights, various alarm devices, switch signals, remote control audio and other remote control fields remote control of Note: special frequencies, special symbols, need to be customized. FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. if not NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Yueqing Reliable Electric Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A4VO-REMOTE Date: 2022-03-02 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

Schematic Diagram Block Diagram Operational Description SW SECURITY DESCRIPTION Parts List Tune up External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Shouzhe You Title: Manager

Yueqing Reliable Electric Co., Ltd. Letter of Authorization Company: Yueqing Reliable Electric Co., Ltd. Address: No.3rd Qitou Industrial Zone, Liushi Town, Yueqing, Wenzhou, Zhejiang Province China Product Name: Remote Controller Model Number(s): Remote Product Description: Remote Controller We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Shouzhe You Title:

Manager Company: Yueqing Reliable Electric Co., Ltd. Date: 2022-03-02