Caution Use manufacturer-approved chargers and accessories;
Do not operate or look at the charger as driving;
Do not slide the charger or device, or cause a collision;
Please use the product within the recommended temperature range,if use beyond the recommended temperature, it will damage the product or shorten the life of the product;
Avoid touching the conductive material, such as liquid, metal,metal powder, dust and pencil lead etc. Wireless Charger WTS-C002-005 User Manual Do not allow children or animals to chew or swallow the Before using this product, please read this guide charger;
to ensure using safely and properly. Do not disassemble, modify, or repair the charger;
About product's other information, Do not place the Magnetic stripe cards near the charger,pleas contact manufacturer. including credit cards,phone cards,bank card and registration card etc., magnetic field may damage the magnetic stripe cards.
[Specification]
[How to use]
Input:DC 5V/2000mA car charging adapter Operation frequency:110KHz205KHz Efficiency:>70%
Effective charging distance:210mm Compatible with Qi Operating temperature:-10+60 Storage temperature:-20+70
[Accessory]
car changer adapter sold seperately
[Charger View]
a:Charging area b:LED c:Power Input Port 1As picture 1align the hole position of the charger and the protruding part of the holder, and force them up to get stuck. 2Install the charger into the blade of the air conditioner, and press the switch to the left/right position. 3Connect the power cable,and insert the Micro - USB plug into the charger power outlet. 4As picture 4press the button behind the charger by hand, let the charger's bracket arms open. 5As picture 5place the phone with your hands and press the clamping arm to the center to secure the phone. 6LED red light indicates the state of standby, blue light indicates the wireless charging, red light flashing indicates the alarm. For your driving safety, please do not installed on the front glass. a b c WTS-C002-005
,
;
,;
,
,,
,
(,,
)
[]
:DC 5V/2000mA
:110KHz205KHz
[]
:>70%
:210mm Qi
:-10+60
:-20+70
[]
3Micro-USB 1 2/
[]
a:
b:LED c:
a b c 4 5 6LED NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The min separation distance is 10cm.