FCC ID: 2AXBW-YM6090 Wireless Charging

WIRELESS CHARGING PAD INSTRUCTIONS SPECIFICATIONS Device Case Thickness: up to 1/4 Temperature Range: 32F to 113F Charge Modes: 5W, 7.5W, 10W with compatible device and power supply Power Output Device Requirements Power Supply 5W 7.5W 10W Wireless charging compatible 5V, 2A IPhone 8 or newer Samsung Galaxy Note 8/S8 plus or other device that supports 10W wireless charging QC 2.0 or better fast charging adapter

(9V, 1.67A) SAFETY INFORMATION 1. Use as intended only. 2. Keep metal objects away from charging pad at all times. 3. Keep indoors and dry. Do not expose to water or other liquids.. 4. Do not expose to temperatures below 32F or above 113F. 5. Do not use as drink coaster. 6. Do not place a device on this item that does not support wireless charging. 7. This product is not a toy. Do not allow children to play with charger. 8. Inspect before every use; do not use if parts are loose, cracked, or damaged. 9. Do not open the housing of the charger pad. OPERATION INSTRUCTIONS

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings there in before set up or use of this product. 1. Connect the USB cable from the inlet on the Charging Pad to a power adapter or another device that can supply USB power. The Indicator will light to indicate power is connected. Note: The power supply must support fast charging as noted on the facing page if that is desired. 2. Center device on top of Charging Pad. The indicator will show blue while charging. 3. If the indicator does not show blue, make sure that the device is properly centered and is compatible with wireless charging. Indicator Light FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Radiation Exposure Statement This device complies with RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device must operate with a minimum distance of 20 cm between the radiator and user body.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: 2020/08/26 TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AXBW-YM6090 For the product stated above, we request that the following information be held confidential;

Model name YM6090 Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name:

Company: YUMING ENTERPRISES LTD. Address:

Vinson Kwan Phone:

Fax:

E-Mail:

4/F, Noble Cenber No. 1006 3#, Fuzhong Rd, Futian District, Shenzhen, China

+86 0755-88262922

+86 0755-88262933 yumingtools@yumingtools.com

YUMING ENTERPRISES LTD. 4/F, Noble Cenber No. 1006 3#, Fuzhong Rd, Futian District, Shenzhen, China Tel: +86 0755-88262922 Fax: +86 0755-88262933 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

8/26/2020 We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AXBW-YM6090 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Name:

Company: YUMING ENTERPRISES LTD. Address:

Vinson Kwan 4/F, Noble Cenber No. 1006 3#, Fuzhong Rd, Futian District, Shenzhen, China

+86 0755-88262922

+86 0755-88262933 yumingtools@yumingtools.com Sincerely, Phone:

Fax:

E-Mail: