XG-600 MiniPCI Wireless Adapter Quick Installation Guide I. Network Configuration The XG-600 MiniPCI Wireless Adapter is an IEEE802.11g-compliant PCI Type DSSS wireless LAN adapter. It fully supports wireless networking under Windows XP/2000/98SE/ME.
The XG-600 MiniPCI Wireless Adapter can be operated in Infrastructure and Ad-Hoc network configurations. Infrastructure mode allows XG-600 MiniPCI Wireless Adapter users to join an Extended Basic Service Set (i.e., connect to access point). Ad-Hoc mode allows XG-600 MiniPCI Wireless Adapter users to join a Basic Service Set (i.e., peer-to-peer mode, without access point). Wireless Infrastructure Access Point Ad-hoc Wired II. Package Content The XG-600 MiniPCI Wireless Adapter x 1 Quick Installation Guide x 1 Product CD-ROM x 1 III. Installation of the XG-600 MiniPCI Wireless Adapter under Windows XP 1. Insert the XG-600 MiniPCI Wireless Adapter into the MiniPCI slot in your notebook and start Windows. Windows will auto-detect the MiniPCI Wireless Adapter and a Found New Hardware Wizard window will show up. 2. Select Install from a list or specific (Advanced) and insert the Product CD-ROM into the appropriate drive. Specify the location where the driver is placed. Click on Next to install the driver. 3. The windows will find MiniPCI Wireless Adapter. Click on Next to continue. 4. Click Finish to complete the installation. 1 Installation of the XG-600 MiniPCI Wireless Adapter under Windows 2000 1. Insert the XG-600 MiniPCI Wireless Adapter into the MiniPCI slot in your notebook and start Windows. Windows will auto-detect the MiniPCI Wireless Adapter and a Found New Hardware Wizard window will show up. Click Next to proceed. 2. Select Search for a suitable driver for my device (recommended). Insert the Product CD-ROM into the appropriate drive. Specify the location where the driver is placed. Click on Next to install the driver. 3. The windows will find MiniPCI Wireless Adapter. Click on Next to continue. 4. Click Finish to complete the installation. Installaton of the XG-600 MiniPCI Wireless Adapter under Windows 98SE/ME 1. Insert the XG-600 MiniPCI Wireless Adapter into the MiniPCI slot in your notebook and start Windows. Windows will auto-detect new hardware and will display a Add New Hardware Wizard window. 2. Select Search for a best driver for your device (recommended). Insert the Product CD-
ROM into the appropriate drive. Specify the location where the driver is placed. Click on Next to install the driver. 3. The Windows will find MiniPCI Wireless Adapter. Click on Next to continue. 4. Once the [Please insert the disk labeled Windows 98SE/ME CD-ROM, and then click OK] window appears, enter the path corresponding to the appropriate drives and click OK. 5. Click Finish to complete the installation. Restart Windows. IV. Installation of the Wireless LAN Utility 1. Insert the Product CD-ROM again. 2. Go the utility folder and run setup.exe. 3. Follow the on-screen instructions to install the Wireless LAN Utility. 4. Upon completion, go to Program Files and run the Wireless LAN Utility. The utility interface will then appear and at the same time its icon appears in the System Tray in the bottom right corner of your task bar. V. Usage of the Wireless LAN Utility The Wireless LAN Utility consists of window with 5 items for you to monitor and configure the XG-600 MiniPCI Wireless Adapter: Configuration, Loop Back, AP Browser, Site Survey and About. 2 Configuration:
The Configuration item allows you to modify the configuration parameters for the XG-600 MiniPCI Wireless Adapter such as Profile, Network Type, Channel, Transmit Rate, ESSID, WEP, RTS/CTS, Fragment Threshold, and Power Save mode. Furthermore, you may monitor the current status of the MiniPCI Wireless Adapter such as State, Current Channel, Current Tx Rate, Throughput, Link Quality and Signal Strength. Look Back:
The Look Back tool helps you examine point-to-point data transmission quality between the your MiniPCI Wireless Adapter and any work station on the network. By entering IP address of the remote station, set ping interval and packet size, you may know whether communication has been made successfully or not. Additionally, if you use the infrastructure wireless LAN configuration, you may run the loopback test by click the Look back button to verify the communication quality between your wireless station and Access Point. 3 AP Browser:
By clicking the Rescan button, the AP Browser can display all the Access Points around working environment. Besides showing the ESSID of each Access Point, it also display BSSID, Channel, Signal, Quality and Supported Rates. To join any of the displayed Access Point, highlight the Access Point you desire to connect and then click the Join BSS or Join ESS to join the group. Site Survey:
When the Site Survey screen is displayed, the channel quality of all 14 radio channels will be displayed. These channel quality measurements are shown on each gauge for the 14 radio channels. The blue bar indicated the channel quality is clear and good. The higher the blue bar is, the better quality you have (i.e., less interference). The yellow bar indicates the channel quality is fair and the red bar indicates the channel is busy or having severe interference. 4 About:
The About item shows the versions the Wireless LAN Utility, driver, firmware and utility of the XG-600 MiniPCI Wireless Adapter. Also, the MAC address and frequency domain is displayed. Technical Support You can find the most recent software and user documentation will be updated periodically on the supplier Web site. If you have difficulty resolving the problem while installing or using the XG-600 MiniPCI Wireless Adapter, please contact the supplier for support. 5 Limited Warranty Statement This Warranty constitutes the sole and exclusive remedy of any buyer or resellers equipment and the sole and exclusive liability of the supplier in connection with the products and is in lieu of all other warranties, express, implied or statutory, including, but not limited to, any implied warranty of merchantability of fitness for a particular use and all other obligations or liabilities of the supplier. In no even will the supplier or any other party or person be liable to your or anyone else for any damages, including lost profits, lost savings or other incidental or consequential damages, or inability to use the software provided on the software media even if the supplier or the other party person has been advised of the possibility of such damages. The following are special terms applicable to your hardware warranty as well as services you may use during part of the warranty period. Your formal Warranty Statement, including the warranty applicable to our Wireless LAN products, appears in the Quick Installation Guide which accompanies your products. Duration of Hardware Warranty: One Year Replacement, Repair or Refund Procedure for Hardware:
If your unit needs a repair or replacement, return it to your dealer/distributor in its original packaging. When returning a defective product for Warranty, always include the following documents:
The Warranty Repair Card
A copy of the invoice/proof of purchase, and
The RMA Report Form (To receive a Return Materials Authorization form (RMA), please contact the party from whom you purchased the product). Upon proof-of-purchase we shall, at its option, repair or replace the defective item at no cost to the buyer. This warranty is contingent upon proper use in the application for which the products are intended and does not cover products which have been modified without the resellers approval or which have been subjected to unusual physical or electrical demands or damaged in any way. 6 Please complete the information below and include it along with your products. Name:
Title:
Company:
Telephone:
Fax:
Email:
City/State/Zipcode:
Country:
Product Name:
Serial Number:
MAC Address:
Invoice Date:
Product Description:
If you have any further questions, please contact your local authorized reseller for support. 7 FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution 1. FCC RF Radiation Exposure Statement: The equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. 2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 3. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device!
The EUT is only for OEM integration only and the device cannot be sold to the General Public. 8 This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users (for example access points, routers, wireless ADSL modems, and similar equipment). The final end product must be labeled in a visible area with the following: "Contains TX FCC ID: M4Y-XG-600". Manual Information for End Users The end user must not have manual instructions to remove or install the device. The user manual for end users must include the following information in a prominent location "
IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter."
9