app
s
|
Applicant Information
|
|
various
|
Effective |
2021-02-28
|
various
|
2020-02-03
|
various
|
2019-02-22
|
various
|
2018-05-24
|
various
|
2018-05-17
|
various
|
2018-03-27
|
various
|
2018-03-19
|
various
|
2017-08-31
|
various
|
2016-12-12
|
various
|
2015-11-24
|
various
|
2015-11-23
|
various
|
Applicant's complete, legal business name |
Zebra Technologies Corporation
|
various
|
FCC Registration Number (FRN) |
0006304075
|
various
|
0006974851
|
various
|
Physical Address |
3 Overlook Point
|
various
|
LINCOLNSHIRE, Illinois 60069
|
various
|
LINCOLNSHIRE, IL
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
b******@baclcorp.com
|
various
|
t******@siemic.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
I28
|
various
|
Equipment Product Code |
MD-FXLAN11AC
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
J****** C****
|
various
|
C******** A******** D******
|
various
|
Title |
Sr. Manager, Regulatory
|
various
|
Director, Compliance Engineering
|
various
|
Telephone Number |
847-6********
|
various
|
84779******** Extension:
|
various
|
Fax Number |
847-6********
|
various
|
84791********
|
various
|
E-mail |
J******@zebra.com
|
various
|
c******@zebra.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 08/28/2021 |
various | 08/02/2020 |
various | 05/21/2016 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
various | DTS - Digital Transmission System |
various | NII - Unlicensed National Information Infrastructure TX |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless 802.11ac+Bluetooth Module |
various | Wireless 802.11ac + Bluetooth Module |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
various | Class II Permissive Change |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Modular Approval. Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. C2PC purpose for the addition of pre-certified 802.11ac+Bluetooth Module into hosts ZD621, ZP620, ZP420, ZD421, and ZP506, as well as co-location with the RFID module (FCC ID: UZ7RE40) documented in this filing. |
various | C2PC to add Portable host ZQ511 & ZQ521 and to operate simultaneously with UHF RFID Module (FCC ID: I28-M6ENANO). The highest reported SAR for body-worn, extremity (Hand) use conditions are 0.50 W/kg, and 0.22 W/kg, respectively
Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. |
various | C2PC to add Portable host ZQ511 & ZQ521 and to operate simultaneously with UHF RFID Module (FCC ID: I28-M6ENANO). The highest reported SAR for body-worn, extremity (Hand) use conditions are 0.28 W/kg, and 0.27 W/kg, respectively.
Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. |
various | C2PC to add Portable host ZQ511 & ZQ521 and to operate simultaneously with UHF RFID Module (FCC ID: I28-M6ENANO).
Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. |
various | C2PC to add Portable host ZQ630 and to operate simultaneously with UHF RFID Module (FCC ID: I28-M6ENANO).
Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation
only. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation
instructions. OEM integrators and end-users must be provided with transmitter operation
conditions for satisfying RF exposure compliance. This grant is valid only when the device is
sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user
has no manual instructions to remove or install the device. |
various | C2PC to add Portable host ZQ630 and to operate simultaneously with UHF RFID Module (FCC ID: I28-M6ENANO). The highest reported Body SAR value is < 0.10 W/kg.
Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation
only. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation
instructions. OEM integrators and end-users must be provided with transmitter operation
conditions for satisfying RF exposure compliance. This grant is valid only when the device is
sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user
has no manual instructions to remove or install the device. |
various | C2PC to add Portable host ZQ630 and to operate simultaneously with UHF RFID Module (FCC ID: I28-M6ENANO). The highest reported body SAR is: 0.14 W/kg, respectively.
Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation
only. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation
instructions. OEM integrators and end-users must be provided with transmitter operation
conditions for satisfying RF exposure compliance. This grant is valid only when the device is
sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user
has no manual instructions to remove or install the device. |
various | C2PC to add Host Card Printers (ZT410, ZT420) and to co-locate with UHF Radio (FCC ID: I28-RFIDM6EMTT).
BT2.1 is disabled via SW
Original Grant comment:
Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation
only. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation
instructions. OEM integrators and end-users must be provided with transmitter operation
conditions for satisfying RF exposure compliance. This grant is valid only when the device is
sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user
has no manual instructions to remove or install the device. |
various | C2PC to add Portable host ZQ610, ZQ620.
Original Grant Comment:
Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation
only. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation
instructions. OEM integrators and end-users must be provided with transmitter operation
conditions for satisfying RF exposure compliance. This grant is valid only when the device is
sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user
has no manual instructions to remove or install the device. |
various | C2PC to add Portable host ZQ610, ZQ620. The highest reported body SAR is: 0.609 W/kg
Original Grant Comment:
Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation
only. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation
instructions. OEM integrators and end-users must be provided with transmitter operation
conditions for satisfying RF exposure compliance. This grant is valid only when the device is
sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user
has no manual instructions to remove or install the device. |
various | C2PC to add Portable host ZQ610, ZQ620. The highest reported body SAR is: 0.0659 W/kg.
Original Grant Comment:
Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation
only. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation
instructions. OEM integrators and end-users must be provided with transmitter operation
conditions for satisfying RF exposure compliance. This grant is valid only when the device is
sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user
has no manual instructions to remove or install the device. |
various | C2PC to add Portable host ZQ510, ZQ520. The highest reported body SAR is: 0.0659 W/kg
Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation
only. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation
instructions. OEM integrators and end-users must be provided with transmitter operation
conditions for satisfying RF exposure compliance. This grant is valid only when the device is
sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user
has no manual instructions to remove or install the device. |
various | C2PC to add Portable host ZQ510, ZQ520. The highest reported body SAR is: 0.0709 W/kg
Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation
only. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation
instructions. OEM integrators and end-users must be provided with transmitter operation
conditions for satisfying RF exposure compliance. This grant is valid only when the device is
sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user
has no manual instructions to remove or install the device. |
various | C2PC to add Host Card Printers (ZC100, ZC150, ZC300, ZC350) and to co-locate with LF/HF Module (FCC: I28MD-ZCLFHF)
Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation
only. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation
instructions. OEM integrators and end-users must be provided with transmitter operation
conditions for satisfying RF exposure compliance. This grant is valid only when the device is
sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user
has no manual instructions to remove or install the device. |
various | C2PC to add portable host printers ZQ310 & ZQ320. The highest reported body SAR is: 0.3925W/kg
Original Grant Comment: Modular Approval. Power Output listed is Conducted. Approval is
limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (11/23/2015) |
various | C2PC to add portable host printers ZQ310 & ZQ320. The highest reported body SAR is: 1.0996W/kg.
Original Grant Comment: Modular Approval. Power Output listed is Conducted. Approval is
limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (11/23/2015) |
various | C2PC to add portable host printers ZQ310 & ZQ320.
Original Grant Comment: Modular Approval. Power Output listed is Conducted. Approval is
limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (11/23/2015) |
various | C2PC to add host printer ZT510 and to operate simultaneously with Bluetooth Low Energy Module (I28MD-ZBRBLE).
Bluetooth is disabled.
Original Grant Comment: Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | C2PC to add host printers ZT610 & ZT620 and to operate simultaneously with Bluetooth 4.0 LE Module (I28MD-ZBR7BTLE) and UHF RFID Module (I28-RFIDM6EMTT).
Bluetooth is disabled
Original Grant Comment: Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device |
various | C2PC to add host printers ZT610 & ZT620 and to operate simultaneously with Bluetooth 4.0 LE Module (I28MD-ZBR7BTLE) and UHF RFID Module (I28-RFIDM6EMTT).
Bluetooth is disabled.
Original Grant Comment: Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | C2PC to add host printer ZT510 and to operate simultaneously with Bluetooth Low Energy Module (I28MD-ZBRBLE).
Bluetooth is disabled.
Original Grant Comment:
Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | C2PC to disable Bluetooth.
Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Modular Approval. Power Output listed is Conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
Bay Area Compliance Laboratories Corporation
|
various
|
Bureau Veritas Consumer Products Services, Inc.
|
various
|
SIEMIC Labs
|
various
|
Name |
L****** T********
|
various
|
L******** B****
|
various
|
L******** B******
|
various
|
Telephone Number |
408-7******** Extension:
|
various
|
408-5********
|
various
|
40852********
|
various
|
Fax Number |
408 7********
|
various
|
408 5********
|
various
|
E-mail |
l******@baclcorp.com
|
various
|
l******@siemic.com
|
|