all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Manual for Windows 2000 | Users Manual | 363.07 KiB | ||||
1 2 |
|
Manual for pocket personal computer | Users Manual | 299.41 KiB | ||||
1 2 | Test Report | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Report | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Report | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | February 07 2003 | ||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report |
1 2 | Manual for Windows 2000 | Users Manual | 363.07 KiB |
Draft WMC6300 Wireless Modem Card Users Guide
(Windows 2000) DMM000001-02 Copyright 2003, MeshNetworks, Inc. All Rights Reserved WMC6300 Windows 2000 Users Guide Foreword This document describes in detail the confidential and proprietary technology of Architecture. MeshNetworks products and technology are MeshNetworks protected by US and international patent and patent pending technology. This document represents the current design; the contents are subject to change at any time at the discretion of MeshNetworks, Inc.
, MeshTray, and MeshNetworks logo are trademarks or registered trademarks of MeshNetworks, Inc. Microsoft, Windows, Windows 2000, and Windows PocketPC are registered trademarks of Microsoft Corporation. All other product names and services identified throughout this publication are trademarks or registered trademarks of their respective companies. No such uses or the use of any trade name is intended to convey endorsement or other affiliation with this publication. Copyright 2003, MeshNetworks, Inc. All Rights Reserved. iii 1 WMC6300 Windows 2000 Users Guide Table of Contents Introduction........................................................................................................................1 System Requirements .......................................................................................................1 General System Requirements........................................................................................1 Whats in the Box...............................................................................................................2 Approved Antennas Options for WMC6300 ....................................................................2 WMC6300 External Connections and Lights....................................................................3 INSTALLING THE SOFTWARE .................................................................................................4 Installing Software (Windows 2000 Clients Only).................................................4 Configuring the DNS Address...........................................................................................8 Connect the Antenna Assembly (Laptop Computer).......................................................9 Connect the Magnetic Antenna Assembly (Optional) ...................................................10 Insert the WMC6300 Wireless Modem Card ...................................................................11 Uninstalling Application Software ..................................................................................14 OVERVIEW OF MESHNETWORKS MESHTRAY...................................................................15 MeshTray ......................................................................................................................15 MeshTray Status ..............................................................................................................16 Starting MeshTray............................................................................................................16 Terminating MeshTray.....................................................................................................16 CUSTOMER SERVICE INFORMATION...................................................................................17 LICENSE AND WARRANTY INFORMATION ..........................................................................18 Important Information......................................................................................................18 REGULATORY INFORMATION...............................................................................................20 v WMC6300 Windows 2000 Users Guide FCC Information...............................................................................................................20 FCC RF Radiation Exposure Statement .........................................................................20 Safety Information for the WMC6300...................................................................21 Safety Certification ..........................................................................................................22 vi WMC6300 Windows 2000 Users Guide Introduction Thank you for purchasing the WMC6300 Wireless Modem Card. Please install the Application Software and Drivers before inserting the Wireless Modem Card in your system. To get started proceed to the Installing the Software section of this document. is a wireless communication system capable of supporting high data rate mobile system is designed to allow standard communication at vehicular speeds. The client hosts with a PCMCIA interface to have a mobile broadband Ethernet connection. system works transparently to the client host in a manner similar to an Ethernet The connection. provides Internet Protocol based data and location services. Its geo-
location accuracy and availability is better than 10 meters within 1 second. It is capable of supporting subscribers traveling up to 100 miles per hour. Figure 1. MeshLAN WMC6300 Wireless Modem Card system provides a secure and reliable transport for the client host. The client The host may still require configuration and authentication before it will be allowed to access services on the core network. Access to the core network is controlled by the network administrator according to current operating practice. This document provides detailed WMC6300 installation and configuration instructions for use when installing the Wireless Modem Card and its Software. System Requirements General System Requirements For best results, ensure the computers meet the following minimum requirements:
Intel based Laptop or Notebook PC running the Microsoft Windows 2000 operating systems 5 MB of available hard disk storage Keyboard Mouse CD-ROM drive or DVD drive Available Type II PCMCIA card slot in the Host device 1 WMC6300 Windows 2000 Users Guide Whats in the Box Each interface. The following is a list of the items provided with each WMC6300 card:
WMC6300 Wireless Modem Card is a full-featured wireless networking WMC6300 Wireless Modem Card Antenna with a MMCX connector WMC6300 Software and Documentation CD CD contains an on-line version of the WMC6300 Users Guide in Adobe The PDF format. If required, the CD also contains an installation executable to load the Adobe Acrobat Reader software. Note: For best results, the the Approved Antennas Options for WMC6300 WMC6300 software should be installed before you insert WMC6300 card into the device. Part Number CAF28863 BMMG2400ML195MS TRA24003 Gain 1.5 dBi 0 dBi 3 dBi Useage Laptop/PDA Mobile Mobile Manufacturer Centurion Maxrad Antennax 2 WMC6300 Windows 2000 Users Guide WMC6300 External Connections and Lights The WMC6300 Wireless Modem Card is designed for insertion into an industry-standard Type II PCMCIA card slot located in a Host device. The WMC6300 has an antenna port to connect the external antenna and two LED Indicators. The Red LED is the transmit indicator and the Green LED is the receive indicator as shown in Figure 3. Figure 2. WMC6300 Antenna Port and LED Indicators 3 WMC6300 Windows 2000 Users Guide Installing the Software Installing Note: Install the Complete the following procedure to install the Software (Windows 2000 Clients Only) Software before inserting the WMC6300 card. Software:
1. Insert the drive. Software Installation CD into the computers CDROM 2. The Setup program will be displayed as shown in Figure 3. Note: If the installation program does not start automatically, open the Windows Start menu, click on Run, and then type d:setup.exe (where d is the letter of the CD-ROM drive) and click the OK button. 3. Click the Next button to continue the installation process. Figure 3. Installation Welcome Window 4 WMC6300 Windows 2000 Users Guide 4. The License Agreement window will be displayed. Please review the End User License Agreement. Use the scroll bar located at the right side of the window to display the complete text message. Note: If you do not agree with the terms of the license agreement, click on Cancel and the installation will be terminated. 5. To continue with the installation process, click on the YES button as shown in Figure 4 and then click on Next to continue the installation. Figure 4. Agree with License Agreement Window 6. The Startup Options window will be displayed as shown in Figure 5. The user can modify the default installation configuration by checking or un-checking the boxes on this installation window. Click on Next to continue the installation process. Figure 5. Ready to Install Window 5 WMC6300 Windows 2000 Users Guide 7. The Ready to Install Window will be displayed as shown in Figure 6. This window displays the Install Folder location and the Shortcut Folder name that will be used to install the to proceed with the installation process. software. Click on Next Figure 6. Ready to Install Window 8. During the installation process, the Performing Setup Actions window displays a status bar that indicates the progress of the installation. When the file transfer is complete, a window will be displayed as shown in Figure 7 that allows the user to view the ReadMe file for late breaking release information. It also allows the user to immediately run MeshTray. Click on Next to proceed with the installation process. Figure 7. Select Options Window 6 WMC6300 Windows 2000 Users Guide 9. If selected, the ReadMe file will be displayed. Review the contents of the file and then close the dialog window by clicking on the X located in the upper-right corner of the window. 10. The Installed Successfully dialog window will appear as shown in Figure 8. Click on Finish to complete the installation process. Figure 8. Finished Popup Window 7 WMC6300 Windows 2000 Users Guide Configuring the DNS Address The Network Operator must supply the DNS IP address for an Internet connection. This address must be manually configured for web URLs such as www.meshnetworks.com to be resolved. Complete the following procedure to configure the address:
in order 1. Click on Start/Settings/Network and Dial-up Connections/Local Area Connection 2. Right click on the Local Area Connection Corresponding to the Wireless Modem Card and select Properties from the pop up menu. 3. Highlight Internet Protocol (TCP/IP) in the Components window. 4. Click on the Properties button. 5. Click on the Advanced button. 6. Click on the DNS tab 7. Click on the DNS Add button. 8. Enter the DNS Server IP Address provided by the network administrator and then click the Add button. 9. Click the OK button to close the Advanced TCP/IP Settings windows. 10. Click the OK button to close the Internet Protocol (TCP/IP) Properties windows. 11. Click the OK button to close the Local Area Connection Properties windows. 12. Click the Close button to close the Local Area Connection Status window. This configuration should remain in the Windows 2000 host. 8 WMC6300 Windows 2000 Users Guide Connect the Antenna Assembly (Laptop Computer) Complete the following procedure to connect the Antenna Assembly to the WMC6300, for use in a standard laptop computer. Warning Always eject card when not in use. 1. Locate the Antenna and insert the connector into the WMC6300 antenna port as shown in Figure 9. Note: The connector will snap into place when fully inserted. Figure 9. Attach Antenna to the WMC6300 9 WMC6300 Windows 2000 Users Guide Warning Use only the MeshNetworks supplied antenna. Use of another antenna is prohibited and violates FCC regulations. Never use the WMC6300 with the Antenna disconnected from the Card. Connect the Magnetic Antenna Assembly (Optional) Complete the following procedure to install the Magnetic Mount Antenna on the rooftop of a vehicle. (The cable length of the Antenna is approximately 12-feet.) 1. Attach the Magnetic Antenna to the metal rooftop of the vehicle so that the antenna is in a vertical orientation. Caution: The base of the antenna contains a powerful magnet that secures the antenna to the rooftop. Use care when attaching the antenna 2. Route the remaining 12-foot cable as required to arrive at the Host Computer. Never use the WMC6300 with the Antenna removed from the rooftop. Never use the WMC6300 with the Antenna disconnected from the Card. Warning. 3. Insert the Antenna Cable Connector into the WMC6300 antenna port as shown in Figure 10. Note: The connector will snap into place when fully inserted. Figure 10. Attach Magnetic Mount Antenna to the WMC6300 10 WMC6300 Windows 2000 Users Guide Insert the WMC6300 Wireless Modem Card Complete the following procedure to install the WMC6300 Wireless Modem Card in the computer. 1. Locate an available Type II PCMCIA card slot in the computer. If necessary, remove the slot dust cover from the slot. 2. To ensure the correct orientation of the card, insert the WMC6300 Wireless Modem Card into the computers PCMCIA card slot with the label side up as shown in Figure 11. CAUTION - Never force the card into the slot. Figure 11. Installing the WMC6300 Wireless Modem Card Figure 12 3. The antenna position must be vertically orientated when the laptop is in use as shown in 11 WMC6300 Windows 2000 Users Guide Figure 12. Proper Orientation of Antenna 12 WMC6300 Windows 2000 Users Guide Removing the WMC6300 Wireless Modem Card The WMC6300 should be ejected using the following procedure to ensure that power to the card is disabled prior to removal. Warning Always eject card when not in use. 1. Click on the Unplug or Eject Hardware icon in the system task bar. 2. Select Stop mea PC Card from the popup menu as shown in Figure 13. Figure 13. Eject the Hardware 3. Wait for a message that indicates that the device may be safely removed from the system as shown in Figure 14. Figure 14. Safe to Remove the WMC6300 Card 4. Remove the WMC6300 from the PCMCIA slot as shown in Figure 15. Figure 15. Removing the WMC6300 from the PCMCIA slot 13 WMC6300 Windows 2000 Users Guide Uninstalling Application Software Complete the following procedure to Uninstall the 1. From the Start menu, select Program Files Uninstall
. software can also be uninstalled using Add/Remove Note: The Programs located in the Control Panel. Ad Hoc Routing Software:
2. The Uninstall program will ask, Are you sure you want to remove MeshNetworks Software as shown in Figure 16. Click on Yes to continue. Figure 16. Confirm Uninstall 3. The Removing Programs From Your Computer window will be displayed while the software is uninstalled as shown in Figure 17. When the Uninstalling Software Process is complete, click on the Close button. Figure 17. Removing Programs From Your Computer Window 14 WMC6300 Windows 2000 Users Guide Overview of MeshNetworks MeshTray MeshTray MeshTray is a status application that reports vital and statistical information about the card. Because MeshTray is a tray application, it stays in the desktop system status tray when it is minimized as shown in Figure 18 and Figure 19. The MeshTray icon changes to indication of the state of the wireless interface. In Figure 18 the MeshTray icon is in an inactive or disconnected state. Inactive MeshTray Icon Figure 18. Inactive MeshTray Icon The MeshTray icon shown in Figure 19 is currently associated with an AP400. The MeshTray icon displays the Link Strength to the associated IAP as color-coded bars.
(More bars indicate greater Link Quality.) MeshTray Icon Figure 19. MeshTray Link Strength Indicator Clicking on the MeshTray icon restores the application to a property sheet interface as shown in Figure 20. 15 WMC6300 Windows 2000 Users Guide MeshTray Status When the utility is launched, MeshTray displays useful system information such as a description of the device, the MAC address of the node, the IP address of the currently associated IAP, and the type of device (i.e., Subscriber Device, Wireless Router or IAP). The Driver and Firmware version and the IAP Address are also displayed. Figure 20. MeshTray Status Page Starting MeshTray During the software installation process, a MeshTray shortcut icon is installed on the users desktop. To start the MeshTray application, double-click on the MeshTray icon. Terminating MeshTray If desired, the MeshTray application may be terminated by positioning the curser over the MeshTray icon that is located in the Toolbar. Then, right-click on the MeshTray icon and select Exit as shown in Figure 21. The task is terminated and the icon is removed until the application is started again from the Start menu. Figure 21. Exit MeshTray 16 WMC6300 Windows 2000 Users Guide Customer Service Information For information about solving difficulties in setting up your mea WMC6300, please see the Frequently Asked Questions in the support page at http://www.meshnetworks.com/. If you have read this document, reviewed the FAQ, and made every effort to resolve installation or operation issues and require assistance, please contact your WMC6300 supplier. 17 WMC6300 Windows 2000 Users Guide License and Warranty Information Important Information PLEASE READ CAREFULLY THE FOLLOWING BEFORE INSTALLING OR USING THIS HARDWARE, CONSISTING OF A CD ROM AND PCMCIA CARD, AND THE SOFTWARE (COLLECTIVELY, THE PRODUCT). IF YOU AGREE WITH ALL OF THE TERMS OF THIS LICENSE AGREEMENT & LIMITED WARRANTY, PROCEED WITH THE INSTALLATION AND USE OF THE PRODUCT FOLLOWING THE ONSCREEN INSTRUCTIONS. IF YOU DO NOT AGREE, DO NOT INSTALL OR USE THE PRODUCT. BY INSTALLING OR USING THE PRODUCT, YOU ARE AGREEING TO BE BOUND BY ALL OF THE TERMS OF THIS LICENSE AGREEMENT & LIMITED WARRANTY. IF YOU DO NOT AGREE TO THE TERMS OF THIS LICENSE AGREEMENT & LIMITED WARRANTY, PROMPTLY RETURN THE UNUSED PRODUCT AND DOCUMENTATION TO THE SOURCE (AS DEFINED BELOW) FOR A FULL REFUND OF THE PURCHASE PRICE. License Agreement & Limited Warranty LICENSE GRANT MeshNetworks, Inc. ("MeshNetworks"), by and through its resellers and suppliers (collectively, the Source) hereby licenses to the end-user (You) the software accompanying this Product ("Software"). You have right of possession to the CD ROM on which the Software is recorded (in accordance with your arrangement with the Source), but MeshNetworks retains title to the Software and related documentation. The license is non-exclusive, non-
transferable, non-sublicensable and confers a right to use only the machine-readable, object code form of the Software for its normal and intended purpose by a single-user. You may make one backup copy of the Software in machine-readable form, provided the backup copy is not installed or used on any electronic device. You must reproduce on the backup copy the MeshNetworks copyright notice and any other proprietary legends that were on the original copy of the Software. RESTRICTIONS You acknowledge that the Product contains copyrighted material, trade secrets and other proprietary material owned by MeshNetworks, and that unauthorized use of such material may cause serious loss or damage to MeshNetworks. You agree that You will not:
decompile, reverse engineer, disassemble, translate or reduce the Product to a human-perceivable form. modify, adapt, pledge, lease, rent, share, lend, distribute, disclose or create derivative works based upon the Product in whole or in part. electronically transmit the Software from one computer to another or over a network. transfer any of your rights in the Software, the backup copy of the Software, the media, the documentation, or this License Agreement & Limited Warranty to another party. use the Product for any unlawful or harmful purpose. TERM, TERMINATION This license is effective until terminated. You may terminate this license at any time by destroying the Software, related documentation and all copies thereof. This license will terminate immediately without notice from MeshNetworks if You fail to comply with any provision of this License Agreement & Limited Warranty. Upon termination You must destroy the Software, related documentation and all copies thereof. HARDWARE WARRANTY MeshNetworks warrants to You that the hardware elements of the Product will be substantially free from material defects in workmanship and materials, under normal use and service, for a period of one (1) year from the date of acquisition from the Source. Our sole obligation under this express warranty will be, at our option and expense, (1) to repair the defective hardware element or, (2) deliver to You an equivalent hardware element to replace the defective item. Any hardware element that is replaced will become our property. Replacement hardware elements may be new or reconditioned. We warrant any replaced or repaired hardware elements for the greater of ninety (90) days from shipment, or the remainder of the initial warranty period. SOFTWARE WARRANTY MeshNetworks warrants to You that the Software, except as noted below, will perform in substantial conformance to its published program specifications, for a period of ninety (90) days from the date of acquisition from the Source. No updates are provided under this warranty. Our sole obligation under this express warranty will be, at our option and expense, to replace any defective software product, with software which substantially conforms to applicable MeshNetworks published program specifications. 18 WMC6300 Windows 2000 Users Guide You assume responsibility for the selection of the appropriate applications program and associated reference materials. MeshNetworks makes no warranty or representation that the Software will meet your requirements or work in combination with any hardware or applications software products provided by third parties, that the operation of the Software will be uninterrupted or error free, or that all defects in the Software will be corrected. WARRANTY SERVICE You must contact the Source of the Product within the applicable warranty period to obtain warranty service authorization. Dated proof of purchase may be required. A Return Material Authorization (RMA) number will be issued. This number must be marked on the outside of the package. The Product must be packaged appropriately for safe shipment and sent prepaid. It is recommended that returned Products be insured or sent by a method that provides for tracking of the package. Responsibility for loss or damage does not transfer to the intended recipient until the returned item is received by such party. We will make commercially reasonable efforts to ship the repaired or replaced item to You, at our expense, not later than ten (10) business days after receipt of the defective Product. We will retain risk of loss or damage until the Product is delivered to You. We will not be responsible for any software, firmware, information, or memory data belonging to You contained in, stored on, or integrated with any Products returned to the Source for repair, whether under warranty or not. WARRANTIES EXCLUSIVE, WARRANTY DISCLAIMER TO THE FULL EXTENT ALLOWED BY LAW, THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, TERMS, OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION, INFORMATIONAL CONTENT, ACCURACY, SYSTEM INTEGRATION, NON-INFRINGEMENT AND QUIET ENJOYMENT, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. WE DO NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE PRODUCT WILL MEET YOUR REQUIREMENTS, THAT THE PRODUCT WILL BE COMPATIBLE WITH ANY OTHER SOFTWARE, HARDWARE OR OPERATING SYSTEM, THAT THE OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR-FREE. WE NEITHER ASSUME NOR AUTHORIZE ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF THIS PRODUCT. WE WILL NOT BE LIABLE UNDER THIS WARRANTY IF TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT OR MALFUNCTION IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO OPEN, REPAIR OR MODIFY THE PRODUCT, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OTHER HAZARDS. LIMITATION OF LIABILITY TO THE FULL EXTENT ALLOWED BY LAW, MESHNETWORKS EXCLUDES FOR ITSELF, ITS RESELLERS AND SUPPLIERS AND THEIR RESPECTIVE DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS, ANY LIABILITY, WHETHER BASED INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF WE HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR OR REPLACEMENT. AT OUR OPTION THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN WILL FAIL OF ITS ESSENTIAL PURPOSE. Some jurisdictions do not allow the exclusion or limitation of implied warranties or the limitation of incidental or consequential damages for certain products supplied to consumers, or the limitation of liability for death or personal injury, so the above limitations and exclusions may be limited in their application to You. When the implied warranties are not allowed to be excluded in their entirety, they will be limited to the duration of the applicable written warranty. This warranty gives You specific legal rights which may vary depending on local law. EXPORT COMPLIANCE You agree and certify that the Product will be utilized only in the United States of America or in compliance with 22CFR125.4(b)(9). GOVERNING LAW This License Agreement & Limited Warranty will be governed by the laws of the state of Florida, U.S.A., and by the laws of the United States, excluding their conflicts of laws principles. Both the Uniform Computer Information Transactions Act and the United Nations Convention on Contracts for the International Sale of Goods are hereby excluded in their entirety from application to this License Agreement & Limited Warranty.
(INCLUDING NEGLIGENCE), FOR IN CONTRACT OR TORT 19 WMC6300 Windows 2000 Users Guide Regulatory Information FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement:
This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in an installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
instructions, may cause harmful interference the to Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the WMC6300 and radio or television receiver. is connected. Consult the supplier of the WMC6300 or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement 1. CAUTION: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. 2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Although this device complies with the FCC RF Exposure limits in multiple configurations of the antenna, we suggest that the antenna be positioned away from the body when transmitting in order to minimize the level of RF Exposure. 20 WMC6300 Windows 2000 Users Guide WMC6300 Safety Information for the The Federal Communications Commission (FCC) with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic products meet the energy emitted by FCC certified equipment. MeshNetworks uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991. Proper operation of this radio according to the instructions found in this manual and the CD will result in user exposure that is hardware and software guides on the substantially below the FCC recommended limits. Do not touch or move the antenna(s) while the unit is transmitting or receiving. Do not hold any component containing a radio such that the antenna is very close to or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate a portable transmitter near unshielded blasting caps or in an explosive environment unless it is a type especially qualified for such use. Do not operate the radio or attempt to transmit data unless the antenna is connected;
otherwise, the radio may be damaged. WARNING Use the antenna supplied by MeshNetworks. Use of other antennas is prohibited may violate FCC regulations. NOTE: The manufacturer is not responsible for any unauthorized modifications to this equipment. Unauthorized modifications could void users authority to operate device. 21 WMC6300 Windows 2000 Users Guide Safety Certification 3041788 Conforms to UL STD ANSI/UL 60950 3rd Edition Certified to CAN/CSA C22.2 NO. 60950-00 Equipment shall be suitable for use in Air pressure: 86kPa to106kPa. 22
1 2 | Manual for pocket personal computer | Users Manual | 299.41 KiB |
Draft WMC6300 Wireless Modem Card Users Guide
(PocketPC 2002) DMM000016-02 Copyright 2002-2003, MeshNetworks, Inc. All Rights Reserved WMC6300 PocketPC 2002 Users Guide Foreword This document describes in detail the confidential and proprietary technology of MeshNetworks Architecture. MeshNetworks products and technology are protected by US and international patent and patent pending technology. This document represents the current design; the contents are subject to change at any time at the discretion of MeshNetworks, Inc.
, MeshTray, and MeshNetworks logo are trademarks or registered trademarks of MeshNetworks, Inc. Microsoft, Windows, Windows XP, and PocketPC are registered trademarks of Microsoft Corporation. All other product names and services identified throughout this publication are trademarks or registered trademarks of their respective companies. No such uses or the use of any trade name is intended to convey endorsement or other affiliation with this publication. Copyright 2002-2003, MeshNetworks, Inc. All Rights Reserved. iii MeshNetworks iv 1 WMC6300 PocketPC 2002 Users Guide Table of Contents Introduction........................................................................................................................1 System Requirements .......................................................................................................1 General System Requirements........................................................................................1 Whats in the Box...............................................................................................................2 WMC6300 External Connections and Lights....................................................................3 INSTALLING THE WMC6300 WIRELESS MODEM CARD .......................................................4 Install Software (PocketPC 2002 Clients Only).....................................................4 Connect the Antenna Assembly .......................................................................................6 Connect the Magnetic Antenna Assembly (Optional Equipment) ..................................6 Insert the WMC6300 Wireless Modem Card .....................................................................8 Configuring the DNS Address...........................................................................................9 Removing the WMC6300 Wireless Modem Card............................................................10 Uninstalling Application Software ..................................................................................11 OVERVIEW OF THE MESHTRAY APPLICATION...................................................................12 MeshTray ......................................................................................................................12 MeshTray Status ..............................................................................................................13 Starting MeshTray............................................................................................................13 Terminating MeshTray.....................................................................................................13 CUSTOMER SERVICE INFORMATION...................................................................................14 LICENSE AND WARRANTY INFORMATION ..........................................................................15 REGULATORY INFORMATION...............................................................................................20 FCC Information...............................................................................................................20 v MeshNetworks FCC RF Radiation Exposure Statement .........................................................................20 Safety Information for the WMC6300...................................................................21 Safety Certification ..........................................................................................................22 vi Introduction WMC6300 Pocket PC 2002 Users Guide Thank you for purchasing the WMC6300 Wireless Modem Card. To get started proceed to the Installing the WMC6300 Wireless Modem Card section of this document. is a wireless communication system capable of supporting high data rate system is designed to mobile communication at vehicular speeds. The allow standard client hosts with a PCMCIA interface to have a mobile broadband system works transparently to the client host in a Ethernet connection. The manner similar to an Ethernet connection. provides Internet Protocol based data and location services. Its geo-location accuracy and availability is better than 10 meters within 1 second. It is capable of supporting subscribers traveling up to 100 miles per hour. MeshLAN WMC6300 Wireless Modem Card Figure 1. system provides a secure and reliable transport for the client host. The The client host may still require configuration and authentication before it will be allowed to access services on the core network. Access to the core network is controlled by the network administrator according to current operating practice. This document provides detailed installation and configuration instructions for WMC6300 Wireless Modem Card and its Software. use when installing the System Requirements General System Requirements results, ensure the computers meet the following minimum For best requirements:
PDA running the Microsoft PocketPC 2002 operating systems, with an available Type II PCMCIA slot Intel based laptop computer running the Microsoft Win2000 or WinXP operating system, with the following:
Keyboard Mouse CD-ROM drive or DVD drive ActiveSynch utility program installed 1 MeshNetworks Cable to connect the PC and the PDA Whats in the Box Each WMC6300 Wireless Modem Card is a full-featured wireless networking interface. The following is a list of the items provided with each WMC6300 card:
WMC6300 Wireless Modem Card WMC6300 Software and Documentation CD Antenna 2 WMC6300 Pocket PC 2002 Users Guide WMC6300 External Connections and Lights The WMC6300 Wireless Modem Card is designed for insertion into an industry-
standard Type II PCMCIA card slot located in a Host device. The WMC6300 has an antenna port to connect the external antenna and two LED Indicators. The Red LED is the transmit indicator and the Green LED is the receive indicator as shown in Figure 2. Figure 2. WMC6300 Antenna Port and LED Indicators 3 MeshNetworks Installing the WMC6300 Wireless Modem Card Install Software (PocketPC 2002 Clients Only) Please install the mea Software before you insert the WMC6300 card. Complete the following procedure to install the mea software:
1. Connect the PC to the PDA with the cable supplied by the PDA manufacturer. Initiate an ActiveSynch session between the computer and the PDA. Note: Refer to the PDA manufacturers documentation for connection and operational instructions.. 2. Insert the mea Software and Documentation for PocketPC CD into the PCs CD-ROM drive. 3. On the PC, navigate to the CD-ROM drive using My Computer. Double click on mea_pocketpc2002_setup.exe to start the software installation process. 4. The mea Welcome installation window will be displayed as shown in Figure 3. Click on the Next button to continue the software installation process. Figure 3. Installation Welcome Window 4 WMC6300 Pocket PC 2002 Users Guide 5. The License Agreement window will be displayed. Please review the End User License Agreement. Use the scroll bar located at the right side of the window to display the complete text message. Note: If you do not agree with the terms of the license agreement, click on Cancel and the installation will be terminated. To continue with the installation process, click on the YES button as shown in Figure 4 and then click on Next to continue the installation. Figure 4. Agree with License Agreement Window 6. The Start Installation window will be displayed as shown in Figure x. Verify that you have an active connection to the PDA, and then click on Next to continue.
<insert new figures>
7. The Install Program will connect to your PocketPC 2002 device to complete the installation. 8. A window will be displayed asking for permission to install the drivers to the default directory. Select the yes button to continue the process. 9. The Installer will now move all of the necessary files onto the PocketPC device The installation will then ask you to verify that there are no additional steps required on the PocketPC. None are required. Select the OK button. 10. The Installation Complete window will be displayed as shown in Figure x. Click on the Finish button to complete the procedure. 11. Reboot the PDA. 5 MeshNetworks Connect the Antenna Assembly Complete the following procedure to connect the Antenna Assembly to the WMC6300.. 1. Locate the Antenna and insert the connector into the WMC6300 antenna port as shown in Figure 5. Note: The connector will snap into place when fully inserted. Figure 5. Attach Antenna to the WMC6300 Warning Use only the MeshNetworks supplied antenna. Use of another antenna is prohibited and violates FCC regulations. Never use the WMC6300 with the Antenna disconnected from the Card. Connect the Magnetic Antenna Assembly (Optional Equipment) Complete the following procedure to install the Magnetic Mount Antenna on the rooftop of a vehicle. (The cable length of the Antenna is approximately 12-feet.) 1. Attach the Magnetic Antenna to the metal rooftop of the vehicle so that the antenna is in a vertical orientation. Caution: The base of the antenna contains a powerful magnet that secures the antenna to the rooftop. Use care when attaching the antenna 2. Route the remaining 12-foot cable as required to arrive at the Host Computer. Warning Never use the WMC6300 with the Antenna disconnected from the Card. 3. Insert the Antenna Cable Connector into the WMC6300 antenna port as shown in Figure 6. Note: The connector will snap into place when fully inserted. 6 WMC6300 Pocket PC 2002 Users Guide Figure 6. Attach Magnetic Mount Antenna to the WMC6300 7 MeshNetworks Insert the WMC6300 Wireless Modem Card Complete the following procedure to install the WMC6300 Wireless Modem Card in the computer. 1. Locate an available Type II PCMCIA card slot in the PDA. If necessary, remove the slot dust cover from the slot. 2. To ensure the correct orientation of the card, insert the WMC6300 Wireless Modem Card into the computers PCMCIA card slot with the label side up as shown in Figure 7. CAUTION - Never force the card into the slot. Figure 7. Installing the WMC6300 Wireless Modem Card 3. When the WMC6300 card is detected, a Start window is displayed as shown. The Use server-assigned IP address radio button should be selected. Click on OK located in the upper right corner of the window. 4. A MeshTray icon will be displayed on the screen of the PocketPC. A green icon indicates successful connection to the network. 5. MeshTray executes automatically whenever the WMC6300 card is inserted into a PocketPC device. Tap on the MeshTray icon to display status information for the WMC6300 card as shown below. 8 Configuring the DNS Address WMC6300 Pocket PC 2002 Users Guide The Network Operator must supply the DNS IP address for an Internet connection. This address must be manually configured in order for web URLs such as www.meshnetworks.com to be resolved. Complete the following procedure to configure the address:
<need new procedure>
1. This configuration should remain in the PocketPC host. 9 MeshNetworks Removing the WMC6300 Wireless Modem Card The WMC6300 should be ejected using the following procedure to ensure that power to the card is disabled prior to removal. Warning Always eject card when not in use. 1. Click on the Unplug or Eject Hardware icon in the system task bar 2. Select Safely remove mea PC Card from the popup menu as shown in Figure 8. Figure 8. Eject the Hardware 3. Wait for a message that indicates that the device may be safely removed from the system as shown in Figure 9. Figure 9. Safe to Remove the WMC6300 Card 4. Eject the WMC6300 from the PCMCIA slot as shown in Figure 10. Do not pull out by the antenna. Figure 10. Removing the WMC6300 from the PCMCIA slot 10 WMC6300 Pocket PC 2002 Users Guide Uninstalling Application Software Complete the following procedure to Uninstall the Software:
<update procedure>
Ad Hoc Routing 1. From the Start menu, select Program Files Uninstall
. software can also be uninstalled using Add/Remove Note: The Programs located in the Control Panel. 2. The Uninstall program will ask, Are you sure you want to remove MeshNetworks Software as shown in Figure 11. Click on Yes to continue. Figure 11. Confirm Uninstall 3. The Removing Programs From Your Computer window will be displayed software is uninstalled as shown in Figure 12. When the while the Uninstalling Software Process is complete, click on the Close button. Figure 12. Removing Programs From Your Computer Window 11 MeshNetworks Overview of the MeshTray Application MeshTray MeshTray is a status application that reports vital and statistical information card. Because MeshTray is a tray application, it stays in the about the desktop system status tray when it is minimized as shown in Figure 13 and Figure 14. The MeshTray icon changes to indication of the state of the wireless interface. In Figure 13 the MeshTray icon is in an inactive or disconnected state. Inactive MeshTray Icon Figure 13. Inactive MeshTray Icon The MeshTray icon shown in Figure 14 is currently associated with an AP400. The MeshTray icon displays the Link Strength to the associated IAP as color-
coded bars. (More bars indicate greater Link Quality.) MeshTray Icon Figure 14. MeshTray Link Strength Indicator Clicking on the MeshTray icon restores the application to a property sheet interface as shown in Figure 15. 12 WMC6300 Pocket PC 2002 Users Guide MeshTray Status When the utility is launched, MeshTray displays useful system information such as a description of the device, the MAC address of the node, the IP address of the currently associated IAP, and the type of device (i.e., Subscriber Device, Wireless Router or IAP). The Driver and Firmware version and the IAP Address are also displayed. Figure 15. MeshTray Status Page Starting MeshTray During the software installation process, a MeshTray shortcut icon is installed on the users desktop. To start the MeshTray application, double-click on the MeshTray icon. Terminating MeshTray If desired, the MeshTray application can be terminated by positioning the curser over the MeshTray icon that is located in the Toolbar. Then, right-click on the MeshTray icon and select Exit as shown in Figure 16. The task is terminated and the icon is removed until the application is started again from the Start menu. Figure 16. Exit MeshTray 13 MeshNetworks Customer Service Information For information about solving difficulties in setting up your mea WMC6300, please see the Frequently Asked Questions in the support page at http://www.meshnetworks.com/. If you have read this document, reviewed the FAQ, and made every effort to resolve installation or operation issues and require assistance, please contact your WMC6300 supplier. 14 WMC6300 Pocket PC 2002 Users Guide License and Warranty Information MeshNetworks, Inc. End User License Agreement IMPORTANT NOTICE TO END USERS: This End User License Agreement (this Agreement) is a legal agreement between the licensee of the Licensed Software being made available for use with the MeshNetworks Equipment (either an individual person or a single legal entity, who will be referred to in this Agreement as You) and MeshNetworks. Inc. DEFINITIONS. In this Agreement, Licensed Software means the computer programs, in machine-
readable, interpreted, compiled or other form, furnished to You for use with the MeshNetworks Equipment, whether owned or licensed by MeshNetworks, and including without limitation, (i) computer programs residing on any medium and all materials or contained in any download supplied by MeshNetworks in connection with the Licensed Software, (ii) related user manuals and explanatory written materials or files (Documentation); and (b) upgrades, modified versions, updates, additions, and copies of the Licensed Software, if any, provided to You by MeshNetworks, either directly or indirectly (collectively, Updates). The MeshNetworks Equipment means the equipment on which the Licensed Software is intended to operate. Source means the party from whom you purchased the MeshNetworks Equipment and obtained the Licensed Software. MeshNetworks means MeshNetworks, Inc., 485 N. Keller Road, Suite 250, Maitland, FL 32751. Support Services has the meaning set forth in Section 7. LICENSE. As long as You comply with the terms of this Agreement, MeshNetworks grants You a personal, non-exclusive, non-transferable (except as provided in Section 11) license to use the Licensed Software (in object code form only) for Your own use in the operation on the MeshNetworks Equipment. The license granted hereunder is perpetual. SOFTWARE TITLE. MeshNetworks is not selling You the Licensed Software. Title to the Licensed Software, including all translations, compilations, derivative works and copies remain with MeshNetworks or its licensors, as the case may be. INTELLECTUAL PROPERTY AND CONFIDENTIALITY. You acknowledge that the Licensed Software and Documentation contain copyrighted material, trade secrets and other material that is proprietary to MeshNetworks, and that except as expressly provided in this Agreement, MeshNetworks retains all rights, title and interests in and to the Licensed Software and all proprietary rights in it. You further acknowledge that unauthorized use of such material may cause serious and irreparable loss or damage to MeshNetworks and its licensors, and therefore you agree that in the event of a breach of this Agreement MeshNetworks will be entitled to injunctive relief to restrain such breach, in addition to monetary damages and its reasonable attorneys fees, charges and costs in enforcing the Agreement. You will keep the Licensed Software, any backup copy of the Licensed Software and the Documentation strictly confidential and will not disclose or provide them (or any information relating to them) to any other person or entity. You will also take all reasonable steps to safeguard the Licensed Software to ensure that unauthorized personnel do not have access to the Licensed Software, and You will notify MeshNetworks of any unauthorized use of the Licensed Software. Except as expressly stated herein, this Agreement does not grant You any intellectual property rights in the Licensed Software and all rights not expressly granted herein are reserved by MeshNetworks. RESTRICTIONS. You will not:
15 MeshNetworks Use the Licensed Software in conjunction with any other equipment or for any purpose other than for the operation and monitoring of the MeshNetworks Equipment and for your internal business purposes in accordance with the operating instructions MeshNetworks or the Source may provide to you from time to time;
Decompile, reverse engineer, disassemble, translate or reduce the Licensed Software to a human-
perceivable form;
Modify, adapt, or translate or create derivative works based upon the Licensed Software in whole or in part;
Lease, rent, sublicense, share, lend, distribute, disclose, network, or pledge the Licensed Software to or for the benefit of any third party;
Use the Licensed Software in a client-server environment, electronically transmit the Licensed Software from one computer to another or over a network or otherwise allow a third party to remotely access or use the Licensed Software;
Transfer any of your rights in the Licensed Software or the Documentation to another party;
Use the Licensed Software for any unlawful or harmful purpose;
Make copies of the Licensed Software, other than a reasonable number of copies of the Licensed Software for back-up or archival purposes and such other copies as are necessary for You to use the Licensed Software as described in the Documentation;
Remove or alter any trademark, copyright, confidentiality or other proprietary right notice in the Licensed Software or Documentation or any copy made by You; or Circumvent any access control mechanism that effectively controls access to the Licensed Software for any purpose. LIMITED WARRANTY. Software Warranty. MeshNetworks warrants that the Licensed Software will operate substantially in compliance with the Documentation for a period of ninety (90) days after delivery to You. Any supplements or Updates to the Licensed Software provided to You after the expiration of ninety (90) days limited warranty period are not covered by any warranty or condition, express or implied. In the event of a breach of the foregoing warranty, You must notify the Source within such 90-day period. In the event that you notify the Source of a breach of the foregoing warranty within such 90-day period, the Source will, at the Sources option, either (i) use commercially reasonable efforts to correct any substantial non-conformity, (ii) replace the non-conforming item of Licensed Software, or (iii) return the fee paid by You for such item of Licensed Software. The foregoing will be entire liability of MeshNetworks and the Source and your sole and exclusive remedy for a breach under the foregoing limited warranty. Neither the Source, nor MeshNetworks will have no liability under this warranty to the extent that (a) the Licensed Software has been misused or exposed to environmental or operating conditions beyond those specified by MeshNetworks, (b) the Licensed Software has been damaged, altered by accident, neglect, misuse or other abuse, (c) the claimed defect has been caused, in whole or in part, by a person or persons other than MeshNetworks, by other products or software not provided by MeshNetworks, or by circumstances not under MeshNetworks' control, or (d) You fail to incorporate all error fix releases that MeshNetworks or the Source has provided. In the event the Source fails to perform its responsibilities as described in this Section 6.1 within a reasonable period of time, MeshNetworks or one of its independent contractors will perform such obligations. The warranty period, but not the scope of obligations described above, may be extended by a written agreement between You and the Source. 16 WMC6300 Pocket PC 2002 Users Guide DISCLAIMER OF PERFORMANCE WARRANTIES. EXCEPT AS SET FORTH IN SECTION 6.1 ABOVE, THE LICENSED SOFTWARE IS LICENSED TO YOU AS IS. MESHNETWORKS DOES NOT REPRESENT OR WARRANT, AND EXPRESSLY DISCLAIMS ANY REPRESENTATION OR WARRANTY, THAT:
THE OPERATION OF THE LICENSED SOFTWARE WILL BE UNINTERRUPTED OR ERROR FREE; AND THE FUNCTIONS OR FEATURES OF THE LICENSED SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE LICENSED SOFTWARE WILL OPERATE IN THE HARDWARE AND SOFTWARE COMBINATIONS SELECTED BY YOU. YOU ASSUME ALL RESPONSIBILITY FOR THE SELECTION OF PRODUCTS AND THE LICENSED SOFTWARE TO ACHIEVE YOUR INTENDED RESULTS, AND FOR YOUR USE OF AND RESULTS OBTAINED FROM THE LICENSED SOFTWARE. DISCLAIMER OF IMPLIED WARRANTIES. EXCEPT AS SET FORTH IN SECTION 6.1 ABOVE, THE LICENSED SOFTWARE IS LICENSED TO YOU AS IS. MESHNETWORKS EXPRESSLY DISCLAIMS, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY AND ALL REPRESENTATIONS AND WARRANTIES, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING REPRESENTATIONS OR WARRANTIES OF NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS, OWNERSHIP, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, SYSTEM INTEGRATION, AND DATA ACCURACY. MESHNETWORKS EXPRESS WARRANTY WILL NOT BE ENLARGED, DIMINISHED OR AFFECTED BY, AND NO OBLIGATION OR LIABILITY WILL ARISE OUT OF, THE RENDERING OF TECHNICAL OR OTHER ADVICE OR SERVICE BY MESHNETWORKS OR THE SOURCE IN CONNECTION WITH THE LICENSED SOFTWARE. NO CONSEQUENTIAL DAMAGES. UNDER NO CIRCUMSTANCES WILL EITHER PARTY BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING IN ANY WAY OUT OF THIS AGREEMENT OR THE USE OF THE LICENSED SOFTWARE AND DOCUMENTATION HOWEVER CAUSED (WHETHER ARISING UNDER A THEORY OF CONTRACT, TORT (INCLUDING NEGLIGENCE), OR OTHERWISE), INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOST PROFITS, LOSS OF DATA, OR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES. THE LIMITATIONS ON LIABILITY SET FORTH IN THIS SECTION WILL APPLY NOTWITHSTANDING THE FAILURE OF ESSENTIAL PURPOSE OF ANY OF THE LIMITED REMEDIES SET FORTH IN SECTION 6.1 ABOVE. LIMITATION OF LIABILITY. THE TOTAL LIABILITY OF MESHNETWORKS, THE SOURCE AND MESHNETWORKS LICENSORS ARISING OUT OF OR RELATING TO THIS AGREEMENT WILL NOT EXCEED THE LICENSE FEES AND PURCHASE PRICE RECEIVED BY THE SOURCE FROM YOU IN THE TWELVE (12) MONTHS PRIOR TO THE EVENT GIVING RISE TO THE LIABILITY. SUPPORT SERVICES. The Source may provide You with support services related to the Licensed Software (Support Services). Use of Support Services is governed by the Sources policies and programs or in other materials from the Source. Any Updates or other supplemental software code provided to You as part of the Support Services are considered part of the Licensed Software and subject to the terms and conditions of this Agreement. You acknowledge and agree that MeshNetworks and its licensors, contractors, resellers and distributors may use technical information You provide to them as part of the Support Services for its business purposes, including for product support and development. INDEMNIFICATION. MeshNetworks will defend, indemnify and hold You harmless from any liability arising from any third party claim or proceeding against You to the extent that such claim or proceeding 17 MeshNetworks is based on an assertion that the Licensed Software infringes any issued United States patent or any trade secret or copyright of any third party; provided, however, that You notify MeshNetworks promptly in writing of any such claim or proceeding and give MeshNetworks full and complete authority, information and assistance to defend such claim or proceeding at the expense of MeshNetworks; and further provided that You give MeshNetworks sole control of the selection of counsel and the defense of any such claim or proceeding and all negotiations for its compromise or settlement. Should the Licensed Software become, or in MeshNetworks opinion be likely to become, the subject of a claim of infringement, MeshNetworks will have the right, at MeshNetworks option and expense, (i) to procure for You the right to continue using the Licensed Software, or (ii) to replace or modify the Licensed Software with a non-infringing version of substantially equivalent function and performance. LIMITATION. MeshNetworks will have no liability to You hereunder for any infringement based upon
(i) the combination of the Licensed Software with other products not provided by MeshNetworks; (ii) the use of other than a current, unaltered version of the Licensed Software; (iii) the use of any derivative works, modification or improvement of the Licensed Software not created by MeshNetworks; (iv) any use of the Licensed Software in the practice of a process not specified by MeshNetworks. Section 8 and 9 state the sole, exclusive and entire liability of MeshNetworks, and the sole, exclusive and entire remedy with respect to any claim of intellectual property infringement by the Licensed Software. TERMINATION. If You breach any provision of this Agreement, then MeshNetworks may, in addition to any other remedies it may have under law, terminate any license granted hereunder effective immediately without liability after ten (10) days written notice to You, and You will promptly cease all use of the Licensed Software and will return to MeshNetworks all copies of the Licensed Software. In such event, at the request of MeshNetworks you will certify in writing that the original and all copies of the Licensed Software has been destroyed or returned to MeshNetworks. ASSIGNMENT AND MESHNETWORKS EQUIPMENT TRANSFER. You may not sublicense or assign this Agreement or any interest or right granted herein without MeshNetworks prior written consent. The Licensed Software is designed and configured for the sole purpose of operating with the MeshNetworks Equipment, and accordingly this Agreement will be automatically assigned on the sale or transfer of the MeshNetworks Equipment with which the Licensed Software operates to the person or entity who takes title to such MeshNetworks Equipment; provided, however, that such assignee or transferee abides by the obligations and restrictions set forth in this Agreement. GOVERNMENT LICENSEE. The MeshNetworks Equipment and Licensed Software and accompanying documentation were developed at private expense and no part of them is in the public domain. The Licensed Software is Restricted Computer Software and Commercial Computer Software and if You are acquiring the Licensed Software for the United States Government, then it is acquiring only restricted rights in the Licensed Software and its Documentation, all as defined in the applicable provisions of the Department of Defense Federal Acquisition Regulation Supplement and the Federal Acquisition Regulations. Such unit will include a restricted rights legend on the MeshNetworks Equipment and Licensed Software as may be necessary to insure the limitation of rights acquired by the government. Notwithstanding the foregoing, this Agreement will not become effective with respect to the United States Government without MeshNetworks prior written approval. EXPORT CONTROLS. This Agreement is subject to the laws, regulations, orders, and decrees of the United States that may be imposed from time to time restricting the import/export of the Products to/from the United States. You will not export or re-export the Licensed Software, or any part of the Licensed Software, directly or indirectly, prohibited by or in violation of the laws, rules or regulations of the United States or any applicable jurisdiction. Nor will You export or re-export the Licensed Software, or any part of the Licensed Software, directly or indirectly without first obtaining the required permission to do so from the applicable governmental agencies. 18 WMC6300 Pocket PC 2002 Users Guide COMPLIANCE WITH LICENSES. You agree that upon request from MeshNetwork or the Source, You will within fifteen (15) days fully document and certify in writing that use of any and all Licensed Software at the time of the request is in conformity with this Agreement or some other valid license from MeshNetworks. MISCELLANEOUS. This Agreement is governed by the laws of the state of Florida, United States of America. The state or federal courts located in or having jurisdiction over Orlando, Florida, United States of America will have exclusive jurisdiction over all maters pertaining to this Agreement. If any term or condition of this Agreement is or will become invalid or unenforceable, then such part will be ineffective to the extent of such invalidity only, without affecting this Agreements remaining provisions. Those rights and obligation, which by their nature are intended to survive the expiration or termination of this Agreement, will survive. The remedies at law of either party in the event of default or impending default by the other party in the performance of any terms of this Agreement will not be adequate, and such terms may be specifically enforced by a decree for specific performance, injunction or other appropriate equitable relief. The failure of MeshNetworks to enforce at any time any provision of this Agreement will in no way be construed to be a present or future waiver of such provision, nor will it affect MeshNetworks ability to enforce any provisions of this Agreement. This Agreement is the entire agreement between the parties with respect to the subject matter set forth herein and supersedes all prior oral written agreements between the parties with respect thereto and may only be amended in writing by the parties. 19 MeshNetworks Regulatory Information FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement:
This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the WMC6300 and radio or television receiver. is connected. Consult the supplier of the WMC6300 or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement 1. CAUTION: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. 2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Although this device complies with the FCC RF Exposure limits in multiple configurations of the antenna, we suggest that the antenna be positioned away from the body when transmitting in order to minimize the level of RF Exposure. 20 WMC6300 Pocket PC 2002 Users Guide WMC6300 Safety Information for the The Federal Communications Commission (FCC) with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted the uncontrolled by FCC certified equipment. environmental limits found in OET-65 and ANSI C95.1, 1991. Proper operation of this radio according to the instructions found in this manual and the hardware and software guides on the products meet MeshNetworks CD will result in user exposure that is substantially below the FCC recommended limits. Do not touch or move the antenna(s) while the unit is transmitting or receiving. Do not hold any component containing a radio such that the antenna is very close to or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate a portable transmitter near unshielded blasting caps or in an explosive environment unless it is a type especially qualified for such use. Do not operate the radio or attempt to transmit data unless the antenna is connected;
otherwise, the radio may be damaged. WARNING Use the antenna supplied by MeshNetworks. Use of other antennas is prohibited may violate FCC regulations. NOTE: The manufacturer is not responsible for any unauthorized modifications to this equipment. Unauthorized modifications could void users authority to operate device. 21 MeshNetworks Safety Certification 3041788 Conforms to UL STD ANSI/UL 60950 3rd Edition Certified to CAN/CSA C22.2 NO. 60950-00 Equipment shall be suitable for use in Air pressure: 86kPa to106kPa. 22
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-05-16 | 2410 ~ 2470 | DTS - Digital Transmission System | Original Equipment |
2 | JBP - Part 15 Class B Computing Device Peripheral |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2003-05-16
|
||||
1 2 | Applicant's complete, legal business name |
Zebra Technologies Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0015642663
|
||||
1 2 | Physical Address |
1 Zebra Plaza
|
||||
1 2 |
Holtsville, New York 11742
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
t******@metlabs.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
QJE
|
||||
1 2 | Equipment Product Code |
WMC63000303
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
L****** Z****
|
||||
1 2 | Title |
Regulatory Specialist
|
||||
1 2 | Telephone Number |
346-2********
|
||||
1 2 | Fax Number |
631-6********
|
||||
1 2 |
L******@zebra.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless PCMCIA Modem Card | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power Output listed is conducted. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time- averaging duty factor not exceeding 50%. The dipole antenna gain is 1.5dB. Automobile rooftop antennas listed in the filing have maximum gain of 3.0dB. SAR compliance has been established in the laptop computer(s) and PDA configurations with PCMCIA slot configurations (e.g., side near the rear) as tested in this filing, and can be used in laptop computers and PDAs with substantially similar physical dimensions, construction, and electrical and RF characteristics. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. Maximum reported body SAR for Laptop Computer application is 1.203W/kg. Maximum reported Body SAR for PDA configuration is 1.423W/kg. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Timco Engineering, Inc.
|
||||
1 2 | Name |
S****** S****
|
||||
1 2 | Telephone Number |
888-4********
|
||||
1 2 | Fax Number |
352-4********
|
||||
1 2 |
i******@timcoengr.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC CE | 2410.00000000 | 2470.00000000 | 0.2000000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15B | CC CE |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC