FCC ID: 2ADM5-SP-0770 BT FABRIC SPEAKER

Date: 6 March 2020 Product: SP-0770 SKU:

SP-0770 Size: 322.5(w) x 100(h) mm Instruction Manual Thank you for purchasing the Revolve Wireless Speaker. This manual provides more information about this wireless speaker, please read the instructions before using. Product Overview Pair Wireless speaker with your mobile device Technical Specification Front Back 1. Keep the distance between your wireless speaker and mobile phone

(or other devices) within 32.8 Feet. 2. Power on the wireless speaker. 3. Activate the Bluetooth function on your phone within range and select BT REVOLVE SPK from the list shown. 4. You will hear a beep sound when pairing is successful. Driver Diameter: 52 mm Impedance: 4 Ohms Power Supply: Li-ion Battery 3.7V 1200 mAh Play Time: 3 - 3.5 Hours Charging Time: 2 - 2.5 Hours Bluetooth Range: 32.8 Feet Micro USB Charging Cable Included OFF-ON DC 5V Prev Next Play/Pause Volume Control Micro USB LED Charging Port Indicator On/Off Switch Reconnect Wireless speaker to your mobile device When powered on, the wireless speaker will automatically connect with the last successfully paired device. FAQ If the Wireless speaker cannot be paired with your device, please try the following:

Ensure that your speaker is in pairing mode or reconnection mode. Ensure that Bluetooth search function of your mobile device is activated. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

(Plug In) Charging your Wireless speaker If the Wireless speaker cannot be recharged:

If you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it is connected and the USB port is powered. interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver. Package Contents Revolve Wireless Speaker x 1pc Micro USB Charging Cable x 1pc Instruction Manual x 1pc Power on Slide the ON/OFF switch to the ON position. Power off Slide the ON/OFF switch to the OFF position. For your safety, please always use appropriate 5V input charger/ Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product. Safety instructions for the lithium battery and charging the product receiver is connected. 1. Use the Micro USB cable provided with this wireless speaker. 2. Connect the Micro USB plug to Micro USB charging port on the speaker, then connect the USB plug to a USB port on a computer or wall adapter to begin charging. 3. The light will turn red while charging and will turn off once fully charged.

-The input voltage to the product is DC 5V 1A.

-In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product.

-Only charge the product at ambient temperatures between 10 deg C/ 50 deg F and 40

- Connect the equipment into an outlet on a circuit different from that to which the

- Consult the dealer or an experienced radio/TV technician for help. RF warning statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

- Do not heat above 70 deg C/158 deg F, eg. Do not expose to sunlight or throw into fire. Item#SP-0770 NOTE:

You must select a qualified charger from a regular manufacturer. You must charge the Wireless speaker if it has been not used for more than 12 months. deg C/104 deg F.

-Switch off the product after use.

-Please note that we wont take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.

-In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development. FCC ID: 2ADM5-SP-0770 Keep All Relevant Information for Future Reference Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106 Made in China Approval:

Date:

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road,Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: akshay.butani@zeeva.com Date: 5/14/2020 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, Zeeva International Limited hereby declare that Product Name: BT FABRIC SPEAKER Model No: SP-0770 FCC ID: 2ADM5-SP-0770 For BT Mode: BLE 1M/2M are disable by software For Below are activated:

Bluetooth BDR(GFSK) , EDR(/4DQPSK), EDR(8DPSK) Except for the manufacturer, the end user does not have any capability to modify/change the RF parameters. We acknowledge that it is the manufacturers responsibility to provide the radio configurations to ensure compliance with Commissions rules. Sincerely Yours, Signature:

Printed Name: Akshay P Butani Tiltle: Vice President

Circuit Description Battery provides energy for the Bluetooth chip(BK3265 ); Crystal oscillator(26MHz) provides the clock signal for the Bluetooth chip. Products is in broadcasting state when stand by, broadcasting Bluetooth signals according to a certain time interval. Bluetooth signals get through a matching circuit, and then transmitted to the space through the antenna(2402MHz-2480MHz). When the product is connected, the product can be in two-way communication with mobile phones, and then the phone's Bluetooth module sends Bluetooth signals into space, the product receives the Bluetooth signal through an antenna, transmission to the Bluetooth chip via matching circuit.the signal amplifies the audio signal through an amplifier and plays out the audio signal from the TWO speaker

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: akshay.butani@zeeva.com 04/24/2020 FCC Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, Zeeva International Limited the undersigned, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

Printed Name: Akshay P Butani Title: Vice President QA-FR-170-B