FCC ID: 2ADM5-SP-0862 BT HOME SPEAKER

5 BASS IAC HUB WIRELESS SPEAKER Instruction Manual Thank you for purchasing the Hub Wireless Speaker. This manual provides more information about this wireless speaker, please read the instructions before using. LED Micro USB Indiestor Charging Port Hub Wireless Speaker x tpe Micro USB Charging Cable x tpe Instruction Manual x 1pe Power on Sle the ON/OFF switch to the ON" positon, Power off Slide the ONIOFF switch to the OFF position Note: Always slide the Power switch to OFF postion when notin use. 1. Koop the distance between your wireless speaker and mobile phone

(cr other devices) within 32.8 Feet 2. Power on the wireless speaker. 3. Activate the Bluetooth function on your phone within range and select BT HUB SPEAKER from thelist shown. 4. You will hear a beep sound when pairing is successful

|When powered on, the wireless speaker will automatically connect withthe last successfully paired device. A. For your safety, please always use appropriate 5V input charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product as it might damage the product. 1. Use the Micro USB cable provided with this wireless speaker. 2 Connect the Micro USB plug to Micro USB charging port onthe speaker, then Connect the USB plug to a USB port on a computer or wall adaptor to begin charging

'3. The light wil tum red while charging and wil tum off once fly charged. Nore:

+ You must select a qualified charger from a regular manufacturer.

+ You must charge the Wireless speaker ifit has been not used for more than 12 months. Ce se Pig eo USB Pg Driver Diameter: 52mm Impedance: 4 Ohms Power Supply: Lion Battery 3.7 200 man Play Time: 23 Hours Charging Time: 1.5-2 Hours Bluetooth Range: 32.8 Feet Bluetooth Version: 6.1 Micro USB Cable Included

+ If the Wireless speaker cannot be paired with your device, please try the following:

Ensure that your speaker isin ping mode or reconnection mode. Ensure that Bluetooth search function of your mobile device is activated. Ifthe Wireless speaker cannot be recharged:

It you use a power outlet, ensure thatthe power supply is connected securely and the outlet works. Ifyou use @ computer, ensure tat itis connected and the USB por is powered. Safety instructions forthe lium battery and charging the product The input voltage to the productis DC SV 1A. In odor to charge the producti safe manner and reiableconditons, please only adoot cotfed appropriate charger adaper for charging the product

-Only charge the prosuct at ambient temperatures between 10 deg C80 deg F and 40 160g "C108 dog F. Do not heat above 70.deg C/168 deg F, 0g. Do not expose to suniight or throw into fre. Switch ofthe product ater use.

-Prease note that we wont take any responsi for any wrong operation (eg. Votlage tigher than 5V) as this may resut in severe injury or loss of propery, and we cannot contol the operating process during the time the user using this product. In extreme cases, abuse or misuse of Lihium battery pack can lead o explosion, heat generation, fre development or smoke development FOC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condiions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply withthe limits fora Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in 2 residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful Interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by fuming the equipment off and on, the user is encouraged to try to comect the Interference by one or more ofthe following measures:

~Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

= Connect the equipment into an outlet on a circuit cfferent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

[RF waming statement:

The device has been evaluated to meet general RF exposure requirement Fe FCC ID: 2ADMS-SP-0862

'92234"06298) Distributed by 1646 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106 Keep all relevant information Made in China for future reference

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ200715830-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road,Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: akshay.butani@zeeva.com Date: 08/13/2020 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, Zeeva International Limited hereby declare that Product Name: BT HOME SPEAKER Model No: SP-0862 FCC ID: 2ADM5-SP-0862 For BT Mode: BLE are disable by software For Below are activated:

Bluetooth BDR(GFSK) , EDR(/4DQPSK), EDR(8DPSK) Except for the manufacturer, the end user does not have any capability to modify/change the RF parameters. We acknowledge that it is the manufacturers responsibility to provide the radio configurations to ensure compliance with Commissions rules. Sincerely Yours, Signature:

Printed Name: Akshay P Butani Tiltle: Vice President

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: akshay.butani@zeeva.com 07/14/2020 FCC Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, Zeeva International Limited the undersigned, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

Printed Name: Akshay P Butani Title: Vice President QA-FR-170-B