HP-0553 Wireless Headphones IM 28 Dec 2021 2. IT SAFE WIRELESS HEADPHONES INSTRUCTION MANUAL
ww 0 Table of Contents 1 Introduction 2 Packaging Contents:
3 Connection Diagram:
4 How To Use--
4.1 General Function-
4.2 Pairing To Mobile Phone-
4.3 Charging Your Product:
5 Product Specification:
6 FAQ:
7 FCC Statement:
Battery Statement-
DYNDaAnRWBONDN>
1. Introduction Congratulations, and thank you for choosing the Kitten Wireless Headphones. This manual will help you operate the Kitten Wireless Headphones, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the Kitten Wireless Headphones. Safety Rules 1. Please follow the rules depicted in this manual closely to ensure your safety. Before using this Bluetooth headphones, we would strongly encourage you to read through this user manual. 2. Be more wary of any edges, uneven surfaces, metal parts, accessories and its packaging so as to prevent any possible injury or damage. 3. Donot modify, repair or dismantle this, Bluetooth headphones. Doing so may result in fies, electric shocks, complete breakdown ofthis Bluetooth headphones, etc. All are not covered under warranty. 4 Do not use an diluent or volatile liquid to clean the Bluetooth headphones. 5 Donotuse the Bluetooth headphones in a hazardous location. 2. Packaging Contents 1X Micro USB Charging Cable 1X Instruction Manual 1X Kitten Wireless Headphones 3. Connection Diagram on/off Button Mico USB Charging port LED Indiator 4. How to use 4.1.General Functions De: d Result Required Action Tur on & Press and hold the On / Off Button Enter the pairing] 29 seconds. After turing on, tne mode calor fashes rede Use a mobie phone with Bluetooth function or other Bluetooth devices i to perform necessary paring acton. Pairing After pairing, the LED indicator slowly bike with ive Press and hold the On / Off Button Turn off for 3 seconds. Plug the Micro USB plug tothe Micro
, USB port. Wen charging, the LED Charging indicator turns red. After fl charging, the LED indicator turns off i Press On/ Off bution to answer phone Answering call, ress On / Off button again to end call a Call Press and hold 2 saconds to reject cal Double cick to redial lat cal Play/Pause | Press on/ of buton to play music Music and press it again to pause musi 4.2. Pairing to Mobile phone or other device To use your Bluetooth headphones, you must first pair your headphones with a mobile phone or other Bluetooth device. Once your Bluetooth headphones is paired to a specific mobile phone, they will remain paired and automatically recognize each other whenever they are within range. Pairing to a phone and Entertainment:
Turn on your phone and ensure the Bluetooth function is activated.
*Turn on the headphones, enter the pairing mode. Search your Bluetooth devices on your phone by following the phone's instructions. Refer to your phones user manual for more information.
* After a few seconds the phone will list the BT CAT HP as a discover device. Select it and follow your phone's instructions to select this pairing.
* Your phone will confirm the pairing, and then press Yes/OK. 4.3. Charging your headphones As For your safety, please always use an appropriate 5V input charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product. Use the Micro USB Charging cable accessory provided with this headphones. Connect the Micro USB plug to the Micro USB charging port on the headphones positioned at in headphones diagram on page 2. Connect the USB plug to a USB port on a computer or wall adapter to activate charging.
**Make sure to keep the headphones charging for a minimum of 2 hours before initial use. Q USB Plug Micro USB Plug Warning:
+ You must select a qualified charger from a regular manufacturer.
+ You must charge the Bluetooth headphones ifit has not been used for more than 6 months. 5. Product Specification Driver Diameter: 40 mm Impedance: 32 Ohms Frequency Response: 20 Hz - 20 KHz Sensitivity: < 85 dB Power Supply: Li-ion Battery 3.7V 160 mAh Playing Time: 3 - 4 Hours Charging Time: 2 - 3 Hours Bluetooth Range: 32.8 Feet Micro USB Charging Cable Included 6. FAQ 1, Why is there no power even when the headphones, is tumed on ?
Ans: Ensure the battery has been charged up to hour for initial use. 2. There is no sound when playback. Ans: Check the connection between headphones with phone or computer, if the connection is not established, please connect again. Make sure the headphones is paired and connected with your target phone or other master device. 7. FCC Statement FOC STATEMENT 1. This device complies wih Part 15 ofthe FOC Rules. Operation is subject to the folowing two condions:
(1) This device may not cause harm interference.
(2) This devs must accept any interference received, including interference that may cause undesired operation 2. Changes or moxifications not expressly approved bythe party responsible for compliance could vad the users authorty to operate the equipment. NOTE: This equipment has been tested and found to comply with the iit for Class B cigtal device, pursuant to Pat 15 ofthe FCC Rules. These limits are designed fo provide reasonable protection against harmful interference in a residential intallaton. This equipment generales uses and can raciate radio frequency energy and, if not instaled and used in accordance with the instuctions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to raclo or television reception, which can be determined by turing the equipment of and on, the users encouraged to ty to corect the interference by one or more ofthe following measures:
- Reotient or relocate the receiving antenna.
- Increase the separation between the equipment and reesver. Connect the equipmentinto an outlet ona crcut ferent from thatto which the receiver is connected. Consul the dealer or an experienced ratio! TV technician for hel, RF waming statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without resticton. AX Satety instructions forthe lthium battery and charging the product
~The input votage to the products 5V 1A. In order to charge the productin safe manner and reliable conditions, please only adopt certified appropriate charger! adapter for charging the product. Only charge the product at ambient temperatures between 10 deg C! 50 deg "F and 40 deg C/104 deg F.
= Do not heat above 70 deg C/158 deg F, e.g. Do not expose to sunlight or throw into fre, Switch off the product after use. Please note that we won't take any responsibilty for any wrong operation
(eg. Voltage higher than 5V) as this may result in severe injury or loss of Property, and we cannot control the operating process during the time the user using this product. in extreme cases, abuse or misuse of Lithium batiery pack can lead to explosion, neat generation, fre development or smoke development. FCC ID: 2ADMS5-HP-0553 Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106 Made in China Keep al relevant information for future reference 8