S BASSAI ELECTRO WIRELESS SPEAKER Instruction Manual Thank you for purchasing the Electro Wireless Speaker, This manual provides more information about this wireless speaker, please read the instructions before using, Product Overview Front Back Micro USB Charging port Onioft switch Package Contents Electro Wireless Speaker x 1pc Micro USB Charging Cable x 1pe Instruction Manual x tpe Power On/Off Power on Slide the ON/OFF switch to the ON position, Power off Slide the ON/OFF switch tothe OFF* position. Pair Wireless speaker with your mobile device 1, Keop the distance between your wireless speaker and mobile phone
(er other devices) within 32,8 Feet, 2, Power on the wireless speaker. 3. Activate the Bluetooth function on your phone within range and s
"BT ELECTRO SPK from the Ist shown. 4. You will hear @ beep sound when pairing is successful. Reconnect Wireless speaker to your mobile device When powered on, the wireless speaker will automaticaly connect withthe last successfull paired device. Charging your Wireless speaker 41, Use the Micro USB charging cable provided with this wireless speaker 21 Connect the Miro USB plug to Miero USB charging port on the speaker, then connect the USB plug to a USB port on a computer or wall adaptor to begin charging. 3. The light wil tum red wile charging and wil tur off once fully charged. NOTE:
+ You must select @ qualified charger trom a regular manufacturer
+ You must charge the Wireless speaker iit has been not used for more than 12 months, yr Use Ph Miro USB Pha Technical Specification Driver Diameter: 2 mm Impedance: 4 Ohms Playing Time: 2 Hours Charging Time: 1.5-2 Hours Rechargeable LHon Battery 3.7V 300 mAh Bluetooth Range: 32.8 feet Micro USB Charging Cable Inckided FAQ
* Hi the Wireless sps please try the following:
Ensure that your speaker is in pairing mode or reconnection mode. Ensure that Bluetooth search function of your mobile device is activated, H the Wireless spe you use a power outlet, ensure thatthe power supply Is connected securely and the outlet works. Ifyou use a computer, ensure that itis connected and the USB ports powered.
&S Safety instructions for the lithium battery and charging the product The input voltage tothe product is DC SV 1A. th order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger! adapter for charging the product.
-Only charge the product at ambient temperatures between 10 deg C/ 50 deg F and 40, deg "C/104 deg F. Do not heat above 70 deg C/158 deg F, eg. Do not expose to sunight or throw into fie. Switch ofthe product after use. Please note that we won't take any responsibilty for any wrong operation (eg. Voltage higher than SV) as this may resuf in severe injury or loss of property, and we cannot Control the operating process during the ime the user using this product. th extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fre development or smoke development. FOC STATEMENT 1. This device complies with Part 15 of the FOC Rules. Operation is subject to the
{ollowing two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation, 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the mits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation, This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the folowing measures:
= Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver,
= Connect the equipment into an outlet on a circuit diferent from that to which the receiver is connected.
= Consul the dealer or an experienced radio/TV technician for help, RF waming statement:
The device has been evaluated to meet general RF exposure requirement, FCC ID: 2ADMS5-SP-0148 Keep All Relevant Information for Future Reference Item# SP-0148