Instruction Manual Thank you for purchasing the Prism Wireless Speaker. This manual provides more information about this wireless speaker, please read the instructions before using, Front Back ATEN ren J ZA OWwOf LED Micro USB Switch Indicator Charging Port Package Contents Prism Wereless Speaker x pc Micro USB Charging Cable x tpe Instruction Manual x tpc Power On/Off Power on Slide the ON/OFF switch to the ON" postion Power off Slide the ON/OFF switch to the OFF position. Pair Wireless speaker with your mobile device 1. Keep the distance between your wireless speaker and mobile phone
(or other devices) within 32.8 Feet. 2. Power on the wireless speaker. 3. Activate the Blustooth function on your phone within range and select BT PRISM SPX" from the list shown, 4. You wil hear a beep sound when pairing is successful. Reconnect Wireless speaker to your mobile device When powered on, the wireless speaker wil automatically connect withthe last Successfully paired device. Charging your Wireless speaker 1. Use the Micro USB cable proved with this wireless speaker. 2. Connect the Micro USB plug to Micro USB charging port on the speaker, then connect the USB plug to @ USB port en a computer or wall adapter to begin charging 3. The ight wil tum red while charging and wil tum off ance fully charged. NOTE:
+ You must select a quaified charger from a regular manufacturer.
= You must charge the Wireless speaker if It has been not used for more than 12 months. yr 58 Pig Mico uss Plug Technical specification Driver Diameter: S2mm Impedance: 4 ohms. Power Supply: L-ion Battery 3.7V 300 mAh Play Time: 1.5-2 Hours Charging Time: 1.5-2 Hours Micro USB Cable included Bluetooth Range: 32 Feet Bluetooth Version: 5.0 FAQ Ifthe Wireless speaker cannot be paired with your device, please try the following:
Ensure that your speaker isin pairing mode or reconnection mode. Ensure that Biustooth search function of your mobile davice is activated
* Ifthe Wireless speaker cannot be recharged:
I you use @ power outlet, ensure that the power supply is connected securely land the outlet works. If you use a computer, ensure that it is connected and the USB port is powered.
& Safety instructions for the lithium battery and charging the product The input voltage tothe product is DC SV 1A.
-tn order to charge the product in safe manner and reliable conitons, please only adopt Certified appropriate charger adapter for charging the product. Only charge the product at ambient temperatures between 10 deg "C/50 deg F and 40 deg "CI106 deg "F.
= Do not heat above 70 deg C/158 deg "F, eg. Do not expose to sunlight or throw int fre, Switch off the product after use.
-Piease note that we wor! take any responsibilty for any wrong operation (og. Votage higher than SV) as this may result in severe Injury oF koss of property, and we cannot Contra the operating process during the time the user using this product
-tn extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fre development or smoke development. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Those limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, If nat Installed and used In accordance with the instructons, may cause harmful Interference to radio communications. However, there is no guarantee that Interference will not occur in a particular instalation. Wf this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the folowing measures:
~ Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
~ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
~ Consuit the dealer or an experienced radio/TV technician for help. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
17"'92234"03437''"8 FCC ID: 2ADMS-SP-0704 Keep All Relevant Information for Fumme Reerenes Made in China