FCC ID: 2ADM5-EP-0617-R BT TWS SPORT AST

Date: 20 Apr 2020 Product: EP-0617 IM Size: 222.75(W) x 105(H)mm FRONT SIDE Product Overview Power On/Off Earbuds Charging Stand Front REACT 1 2 INSTRUCTION MANUAL Thank you for purchasing the React True Wireless Earbuds. This manual provides more information about the wireless earbuds, please read the instructions before using. 3 4 5 1. LED Indicator 2. On/Off Button/

Play/Pause Music Answer/End Call 3. On/Off Button 4. LED Indicator 5. Micro USB Charging Port Back Instruction Manual Instruction Manual Micro USB Charging Cable USB Plug Micro USB Plug Package Contents React True Wireless Earbuds x 1 pair Portable Charging Stand x 1 Micro USB Charging Cable x 1 Instruction Manual x 1 Driver Diameter: 10 mm Impedance: 32 Ohms Frequency Response: 20 Hz 20 KHz Sensitivity: 96 3dB Power Supply:

Li-ion Battery 3.7V 70 mAh (per Earbud) Li-ion Battery 3.7V 500 mAh (Charging Stand) Play Time:

Total 12 Hours (Earbuds playing time is 3 Hours and the Charging Stand can provide 3 times for the earbuds charging) Specifications Reconnect the wireless earbuds to your mobile device Charging Time: 2-2.5 Hours Bluetooth Range: 32.8 Feet Micro USB cable included When powered on, the wireless earbuds will automatically connect with the last successfully paired device. BACK SIDE Answer / Reject a call When receive a call, press the On/Off Button once ( on either earbud) to accept the call, or answer the call normally via your moblie phone. Press and hold 2 seconds to reject it. To end the call, just press On/Off button at any side of earbud with Beep sound to end it. End a call Functions Pause / Play Music: Short Press on On/OFF Button Go back to previous song: Press Left On/Off Button for 1 second. Advance to next song: Press Right On/Off Button for 1 second. Volume Up: Double click Right On/Off button to increase. Volume Down:Double click Left On/Off button to reduce. Charging your Earbuds 1. Insert the React Earbuds on the charging stand. 2. Press the On/Off button on the stand, charging will be started. 3. LED indicator light of the charging stand will be turned Blue when charging your earbuds. 4. Once fully charged, the LED will be off. Recharge Charging Stand For your safety, please always use appropriate 5V input charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product. 1. Use the Micro USB charging cable provided with the packaging. 2. Connect the Micro USB plug to Micro USB charging port on the charging stand, then connect the USB plug to a USB port on a computer or wall adapter to begin charging. 3. The Red LED on the charging stand will be on blink during charge. 4. Once fully charged, the Red LED will be off. NOTE:

You must select a qualified charger from a regular manufacturer. You must charge the charging stand and earbuds if it has been not used for more than 12 months. FAQ If the wireless earbuds cannot be paired with your device, please try the following:

Ensure that your earbuds are in pairing mode or reconnection mode Ensure that Bluetooth search function of your mobile device is activated. If the wireless earbuds will not turn on:

Make sure the earbuds are fully charged. Can I change the battery for the earbuds?

The wireless earbuds use a built-in non-detachable battery which cannot be removed. If the Portable charge stand cannot be recharged:

If you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it is connected and the USB port is powered. Safety instructions for the lithium battery and charging the product

-The input voltage to the product is 5V 1A.

-In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product.

-Only charge the product at ambient temperatures between 10 deg C/ 50 deg F and 40 deg C/104 deg F.

- Do not heat above 70 deg C/158 deg F, eg. Do not expose to sunlight or throw into fire.

-Switch off the product after use.

-Please note that we wont take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.

-In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development. Power On Press and hold down the On/Off Button of earbuds for 3 seconds and the LED will flash. Power Off Press and hold down the On/Off Button of earbuds for 4 seconds and the LED will turn off. Pair the wireless earbuds with your mobile device 1. Keep the distance between the earbuds and mobile device within 32.8 feet. 2. De-activate the Bluetooth function on your mobile device. 3. Power on both earbuds simultaneously by pressing the On/Off buttons for 3 seconds and wait for 3 to 5 seconds for auto pairing. The Left earbud has indicator blinking alternatively in Red and Blue. The Right earbud will blinking in Blue slowly when auto pairing is successfully on L/R earbuds. 4. Activate the Bluetooth function on your mobile device and select REACT TWS from the list shown. 5. After pairing successfully, both earbuds will start blinking slowly in blue.

*Attention: If the auto pairing is not successful, manual pairing between earbuds is essential by following below procedures:

1. Make sure the earbuds are charged. 2. De-activate the Bluetooth function on your mobile device. (if you had been paired the earbuds to some other mobile device(s) nearby, please sure to de-activate those device(s) too). 3. Power on both earbuds simultaneously by pressing the On/Off buttons for 3 seconds and wait for 3 to 5 seconds for auto pairing. (Keep the Bluetooth function off on your mobile device before this operation.) 4. Activate the Bluetooth function on your mobile device and select REACT TWS from the list shown. 5. After pairing successfully, both earbuds will start blinking slowly in blue. Disconnect the wireless earbuds from your mobile device Power off the wireless earbuds; or Switch off the Bluetooth on your mobile phone; or Leave the earbuds 60ft away from your mobile phone or further. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. ITEM# EP-0617 FCC ID: 2ADM5-EP-0617-R

(Right side) FCC ID: 2ADM5-EP-0617-L

(Left side) Keep all relevant information for future reference Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106 Made in China

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road,Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: akshay.butani@zeeva.com Date: 05/15/2020 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, Zeeva International Limited hereby declare that Product Name: BT TWS SPORT AST Model No: EP-0617 FCC ID: 2ADM5-EP-0617-R For BT Mode: BLE are disable by software For Below are activated:

Bluetooth BDR(GFSK) , EDR(/4DQPSK), EDR(8DPSK) Except for the manufacturer, the end user does not have any capability to modify/change the RF parameters. We acknowledge that it is the manufacturers responsibility to provide the radio configurations to ensure compliance with Commissions rules. Sincerely Yours, Signature:

Printed Name: Akshay P Butani Tiltle: Vice President

26MHz AB5337 A) ; Crystal

) provides the clock signal for the Bluetooth chip. Bluetooth signals Circuit Description 1. Battery(3.7V)provides energy for the Bluetooth chip(

oscillator(

get through a matching circuit, and then transmitted to the space through the antenna 2402MHz2480MHz . When the product is connected, the product can be in twoway communication with other Bluetooth devices, and then the device's Bluetooth module sends Bluetooth signals into space, the product receives the Bluetooth signal through an antenna, transmission to the Bluetooth chip via matching circuit.

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong Tel: +852-2868 0511 | Fax: +852-2524 1986 E-mail: akshay.butani@zeeva.com 04/24/2020 FCC Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, Zeeva International Limited the undersigned, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

Printed Name: Akshay P Butani Title: Vice President QA-FR-170-B