FCC ID: 2ADM5-EP-0697V2 FLIP CHARACTER TWS

Date: 26 JUN 2023 Product: EP-0697 IM Size: 222.75(W) x 105(H)mm FRONT SIDE Product Overview Power On/Off INSTRUCTION MANUAL Thank you for purchasing the FLIP True Wireless Earbuds. This manual provides more information about the wireless earbuds, please read the instructions before using. 1 2 3 FLIP True Wireless Earbuds Portable Charging Case 4 5 1. LED Indicator 2. Microphone 3. Touch Control Area On/Off, Play/Pause Music Answer/End Call 4. USB Type-C Charging Port 5. Charging LED Indicator Package Contents 1(One) Pair Earbuds 0.82in. x 0.94in. x 0.59in. (2.1cm x 2.4cm x 1.5cm) each 1(One) Portable Charging Case 2.13in. x 2.09in. x 1.77in. (5.4cm x 5.3cm x 4.5cm) 1(One) USB Type-C Charging Cable 11.8in. (30cm) 1(One) Instruction Manual Specifications Driver Diameter: 10 mm Impedance: 32 Ohms Frequency Response: 20 Hz - 20 kHz Sensitivity: 98 dB +/- 3 dB Power Supply: Li-ion Battery 3.7V 35 mAh Per Earbud Total Playtime: 10 Hours Charging Time: <2 Hours Bluetooth Range: 32.8 Feet Bluetooth Version: 5.3 Charging Case Battery Capacity: 200 mAh USB Type-C Charging Cable Included BACK SIDE Answer / Reject a call FAQ When receive a call, press the touch control area once (on either earbud) to accept the call, or answer the call normally via your mobile phone. Press and hold the touch control area 2 seconds to reject it. If the wireless earbuds cannot be paired with your device, please try the following:

Ensure that your earbuds are in pairing mode or reconnection mode Ensure that Bluetooth search function of your mobile device is activated. End a call To end the call, just press the touch control area at any side of earbud with Beep sound to end it. Functions Pause / Play Music: Short Press on touch control area Go back to previous song: Tap the Left touch control area twice. Advance to next song: Tap the Right touch control area twice. Voice assistant: Hold the touch control area for 2 seconds. Charging your Earbuds 1. Open the charging case cover. 2. Insert the Earbuds into the charging case. 3. The earbuds will start the charge automatically. 4. LED indicator light of the Earbuds will be turned on when charging. 5. Once fully charged, the LED will be off. Recharge Charging Case For your safety, please always use appropriate 5V output charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product. 1. Use the USB Type-C charging cable provided with the packaging. 2. Connect the USB Type-C plug to USB Type-C charging port on the charging case, then connect the USB plug to a USB port on a computer or wall adapter to begin charging. 3. The LED on the charging case will flash during charging. 4. Once fully charged, the LED will be on. 5. The LED will be on during earbuds is charging and will be off after fully charged. NOTE:

You must select a qualified charger from a regular manufacturer. You must charge the charging case and earbuds if it has been not used for more than 6 months. USB plug USB Type-C plug CAUTION: The USB Type-C charging cable included with this item is intended for use with this product. Only use the included USB Type-C charging cable to charge this product. If the wireless earbuds will not turn on:

Make sure the earbuds are fully charged. Can I change the battery for the earbuds and the charging case?

The wireless earbuds and the charging case use a built-in non-detachable battery which cannot be removed. If the charging case cannot be recharged:

If you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it is connected and the USB port is powered. Safety instructions for the lithium battery and charging the product

-The input voltage to the product is 5V 1A.

-In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product.

-Only charge the product at ambient temperatures between 10C/ 50F and 40C/104F.

- Do not heat above 70C/158F, eg. Do not expose to sunlight or throw into fire.

-Switch off the product after use.

-Please note that we wont take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.

-In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development. Power On Touch and hold the touch control area of earbuds for 2 seconds and the LED will flash. Power Off Touch and hold the touch control area of earbuds for 5 seconds and the LED will be off. Pair the wireless earbuds with your mobile device 1. Keep the distance between the earbuds and mobile device within 32.8 feet. 2. De-activate the Bluetooth function on your mobile device. 3. The protective stickers must be removed from the earbuds and put the earbuds back to charging case before use. Take both earbuds out from charging case and wait for 3 to 5 seconds for auto pairing. The earbud has indicator blinking quickly. Another earbud will stop blinking when auto pairing is done successfully. 4. Activate the Bluetooth function on your mobile device and select FLIP TWS from the list shown. 5. After pairing is successful, both earbuds LED will be off.

*Attention: If the auto pairing is not successful, manual pairing between earbuds is essential by following below procedures:

1. Make sure the earbuds are charged. 2. De-activate the Bluetooth function on your mobile device. (if you had been paired the earbuds to some other mobile device(s) nearby, please sure to de-activate those device(s) too). 3. Power on both earbuds simultaneously by touch and hold the Touch control area for 3 seconds and wait for 3 to 5 seconds for auto pairing. (Keep the Bluetooth function off on your mobile device before this operation.) 4. Activate the Bluetooth function on your mobile device and select FLIP TWS from the list shown. 5. After pairing successfully, both earbuds LED will be off. Reconnect the wireless earbuds to your mobile device When powered on, the wireless earbuds will automatically connect with the last successfully paired device. Disconnect the wireless earbuds from your mobile device Power off the wireless earbuds; or Switch off the Bluetooth on your mobile phone; or Leave the earbuds 60ft away from your mobile phone or further. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID2ADM5-EP-0697V2 Keep all relevant information for future reference ITEM# EP-0697-AST2 Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106 Made in China

As the product is too small to print the FCC ID on the product, according to the regulations, the FCC ID is printed on the instruction manual and the outer packaging color box.

DD MM YYYY Date: 27 06 2023 Release N.: DR3 SKU: EP-0697-AST2 Product Name:

Dev. Stage: Printing Methods: Category: Audio DESIGN CMYK Season: FW 2023 Guideline Reference: N/A PKG Artwork 2. BASS JAXKK FLIP THE FACES!

) Bluetooth BASS JAXX DOCUMENT: PKG Artwork Total Measure Customer:

five BECW ZEEVA INTERNATIONAL PAGE.:4/4 PKG Size: W:3.66x H:5.71 x D:1.97in W:93 x H:145 x D:50mm

) Bluetooth

BASSJAKK TOTAL PLAYTIME 10H PVC WINDOW KEYCHAIN NOT INCLUDED. TOUCH CONTROL BLUETOOTH RANGE SO+FT HIGH QUALITY SOUND

| SPECIFICATIONS |

Driver Diameter: 10 mm Charging Time: <2 Hours Impedance: 32 Ohms Bluetooth Range: 32.8 Feet Frequei esponse: 20 Hz- 20 kHz Bluetooth Version: 5.3 Sensiti 98 dB +/-3dB Charging Case Battery Capacity: 200 mAh ly: Li-ion Battery 3.7V 35 mAh Per Earbud USB Type-C Charging Cable Included Total Playtime: 10 Hours TOUCH CONTROL AUTO PAIRING FLIPPING FACE COMPATIBLE WITH 08 Us iPhone Android iPad? _ Wireless. Smartphones Tablets Audio Players FLEP TRUE WIRELESS EARBUDS ze A\ CAUTION: The USB Type-C charging cable included wit!

1(One) Pair Earbuds 0.82in. x 0.94in, x 0.59i ne) USB-Type C Charging Cable 11 .8in. (30cm) fi Fi 1(One) Portable Charging Case 2.13 mx 45cm) {(One) instruction Manual 6 Bl u etooth this product. Only use the included USB Type-C charg ITEM# EP-0697-AST2-GREEN 922342323557 Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, VA 18108 Made in China JT12[6005 joxzewe pesge st ,,pioupur sdiqunnon s9ypo pues Nay su Duy afddy Jo spewapesa are pe Uwesedo peusepun esneo fel ely eoUB LIL! BULL penledal eoualejiequl Aue ydeooe JSMU sdinNp SIU (2;

ue Souesaei ryuey osteo ou ABW OINgp SUL SUORIPUOD OMm| BUIMO}jO} ay O} yelqns SI UOReIedO SAINY DOJ OU} JO GL Wed YIM saljdwioo sa1nap siy |

ZAL690-d4-SWOYZ:Cl 334 H ZEMMDDYY 1 Steel Stamp Tracking Number Approval:

375c Insert Card Sa O 4 SSK) W\\4 pA OX) @.:

() Y)

ew

~ AO Q

co SOS 4 Set SE ZB A)

(Zeeva International Limited) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-28-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID2ADM5-EP-0697V2

[Zeeva International Limited] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature)

(Kevin Tso) Rev 1/26/2023

(Zeeva International Limited) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-28-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID2ADM5-EP-0697V2

[Zeeva International Limited] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely,

(Applicant signature)

(Kevin Tso) Rev 1/26/2023

Zeeva International Limited Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID:2ADM5-EP-0697V2 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description File Name Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, We also requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. Exhibit Type File Name Sincerely, Kevin Tso 2023.08.28 Rev 11/20/07

Zeeva International Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-8-28 SUBJECT: FCC ID: 2ADM5-EP-0697V2 To Whom It May Concern:

I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements:

1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the

"accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the Users Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, Zeeva International Limited

Kevin Tso

Zeeva International Limited Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date:2023-08-07 SUBJECT: FCC Application for (2ADM5-EP-0697V2) To Whom It May Concern:

We, the undersigned, hereby authorize Sam Lv. at EMTEK (DONGGUAN) CO., LTD. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK (DONGGUAN) CO., LTD.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Sincerely, Kevin Tso 2023.08.16

Zeeva International Limited Suite 1007B, 10th Floor, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong, China Date: [2023.08.28]

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ADM5-EP-0697V2 FRN: 0024102113 US Agent Attestation Statement / Part 2.911(d)(7)

[Zeeva International Limited] certifies, that as of [2023.08.28], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2ADM5-EP-0697V2

[Zeeva International Limited], accepts to maintain an agent of service of process in the United States for no less than one year after her the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-

related administrative or judicial proeitceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [Zeeva International Limited] for FCC ID: 2ADM5-EP-0697V2 Designated Agent Information:

Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: Support@FCCUSAgent.com Sincerely, Company: [Zeeva International Limited]

Company Representative: [Kevin Tso]

Signature: [Signature]

Designated Agent: FCC US Agent, LLC Designated Agent Representative: Tim Payne Signature: