Product Overview Charging your wireless speaker Front Back USER MANUAL OFF/ON DC5V On/Off Switch Micro USB Charging Port LED Light Indicator Package Contents Translucent Light Up Wireless Speaker x 1pc Micro USB Charging Cable x 1pc User Manual x 1 Power on Slide the ON/OFF Switch to the right. Power off Slide the ON/OFF Switch to the left. 1. Use the Micro USB cable provided with this wireless speaker. 2. Connect the Micro USB plug to Micro USB charging port on the speaker, then connect the USB plug to a USB port on a computer or wall adapter to begin charging. 3. The light will turn red while charging and will turn off once fully charged. NOTE:
You must select a qualified charger from a regular manufacturer. You must charge the wireless speaker if it has been not used for more than 12 months. Technical specification Driver Diameter: ----------------------------------------------------------- 40mm Impedance: ----------------------------------------------------------------- 4 Ohms Frequency Response: --------------------------------------------------- 20Hz - 20KHz Battery Capacity: ---------------------------------------------------------- 300 mAh Battery Type: --------------------------------------------------------------- Li-ion Battery 3.7V Playing time: ---------------------------------------------------------------- 1-2 hours Bluetooth Range: ---------------------------------------------------------- 32.8 Feet Bluetooth Version: --------------------------------------------------------- 4.1 FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC ID: 2ADM5-SP-0432 Pair wireless speaker with your mobile device FAQ 1. Keep the distance between your wireless speaker and mobile phone
(or other devices) within 32.8 Feet. 2. Power on the wireless speaker. 3. Activate the Bluetooth function on your phone within range and select LIGHTUP LEDSPKR from the list shown. 4. You will hear a beep sound when pairing is successful. Reconnect wireless speaker to your mobile device When powered on, the wireless speaker will automatically connect with the last successfully paired device. If the wireless speaker cannot be paired with your device, please try the following:
Ensure that your speaker is in pairing mode or reconnection mode. Ensure that Bluetooth search function of your mobile device is activated. If the wireless speaker cannot be recharged:
If you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it is connected and the USB port is powered. RF Warning Statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.