FCC ID: 2BBSY001 Smartphone Video Rig

Zeniko Technology Co., LTD Add.: 1208 Room, Jinshan Building, No.5033, Shennan East Road, Xinwei Community, Guiyuan Street, Luohu District, Shenzhen City Tel: +86-755-25106331 www.zeniko.com Made in China 705-MR1100-00 MR11 Smartphone Video Rig FOREWORD Thank you for purchasing!

This smartphone video rig MR11 can turn your smartphone into portable and handheld shooting device with the following characteristics. Its six 1/4 screw ports, one Arri positioning hole and two coldshoe slots greatly improve the expandability. Detachable Bluetooth remote control supports shooting and recording from far distance. Besides, it can also charge the smartphone wirelessly or with a charging cable. With a clampable width of 57mm to 95mm, MR11 is suitable for smartphone photography, live streaming, vlogging, microfilm production and etc. WARNING Keep out of reach of children. Close supervision is necessary when any appliance is used by or near children. Do not leave appliance unattended while in use. If the light beads are damaged or deformed by heat, stop using and contact the manufacturer, service agent or qualified maintenance in time to replace. This appliance is not waterproof device. Keep it dry, do not immerse this appliance in water or other liquids. Do not use this appliance in rainy, humid, dusty in overheated environments. Unauthorized service will void the warranty. Changes made to the specifications or designs may not be reflected in this manual. NAME OF PARTS 1/4 Screw Port 1 Arri Positioning Hole 1/4 Screw Port 2 Bluetooth Indicators Bluetooth Control Button Smartphone Clip

(180rotatable) CCT/DIM Indicator Wireless Charging Indicator

- Button

+ Button M Button Charging Indicators Wireless Charging Button Coldshoe Slot 1 Coldshoe Slot 2 1/4 Screw Port 6 Fill Light 1/4 Screw Port 3 1/4 Screw Port 5 USB-A Port

-07-

-08-

USB-C Port 1/4 Screw Port 4 Lanyard Hole WHATS INSIDE Bluetooth Remote Control 1 Smartphone video Rig 1 Charging Cable x1 Instruction Manual 1 CCT/DIM Indicator Press the M button, the CCT/DIM indicator constant on white means DIM adjusting mode, the CCT/DIM indicator constant on yellow means CCT adjusting mode. Wireless Charging Indicator Press and hold the wireless charging button, the wireless charging indicator constant on white means wireless charging mode is on, then users can wirelessly charge the smartphones by clipping it properly. Press and hold the wireless charging button, the wireless charging indicator off means the wireless charging mode is turned off. INSTRUCTIONS FOR INDICATORS Bluetooth Indicators Long press the Bluetooth control button, the Bluetooth indicators constant on blue means the Bluetooth is turned on, while the indicators off means the Bluetooth is turned off. Charging Indicators Bluetooth On Bluetooth Off POWER SWITCH Press and hold the M button to turn on or off the device, the CCT/DIM indicator will light up in power on status. One charging indicator lights up means the battery level is 0% to 25%, please charge in time. Two charging indicators light up means the battery level is 25% to 50%. Three charging indicators light up means the battery level is 50% to 75%. Four charging indicators light up means the battery level is 75% to 100%. CCT ADJUSTMENT Press the M button in power on status can switch CCT/DIM adjusting mode, the CCT/DIM indicator will be constant on yellow in CCT adjusting mode. Press the button or + button to adjust CCT among: 2800K, 3200K, 4300K, 5600K and 6500K. DIM ADJUSTMENT Press the M button in power on status can switch CCT/DIM adjusting mode, the CCT/DIM indicator will be constant on white in DIM adjusting mode. Press the button or + button to adjust DIM among five levels.

-09-

-10-

WIRELESS CHARGING/WIRED CHARGING BLUETOOTH CONTROL MR11 can charge the smartphone wirelessly or with a charging cable. Wireless Charging: Press and hold the wireless charging button, the wireless charging indicator constant on white means wireless charging mode is on, then users can wirelessly charge the smartphones by clipping it properly. Note: The wireless charging parts may vary in different phone brands, users need to adjust the contact positions accordingly. Press and hold the Bluetooth control button until the indicator is constant on blue, then the Bluetooth is turned on. Connect to the device ZENIKO-MR11 via smartphone Bluetooth, then users can control the smartphone to shoot and record from far distance. Press and hold the Bluetooth control button, the indicators off means the Bluetooth is turned off. Wired Charging: Turn on the device, connect the smartphone to the USB-A port with the USB-A charging cable to charge it. TECHNICAL DATA Model Power Supply Input Power Output Parameters CCT DIM CRI TLCI Illuminance Data Work Environment Temperature Dimension Net Weight MR11 5V 1.5A Max. Wireless: 5V 1A(Max.) Wired: 5V 2A(Max.) 2800K, 3200K, 4300K, 5600K, 6500K Five levels 95 95

-10~+40 10.7*5.6*1.5 438g Specifications and data may subject to changes without notice.

-11-

-12-

FCC STATEMENT DECLARATION OF CONFORMITY This device complies with part 15 of the FCC Rules. Operation is subject to the Zeniko Technology Co., LTD hereby declares that this equipment are in following two conditions:

(1) This device may not cause harmful interference, and compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this

(2) this device must accept any interference received, including interference that product is allowed to be used in all EU member states.For more information of may cause undesired operation. DoC, Please click this web link:http://www.zeniko.com/EU/MR11.PDF. The device complies with RF specifications when the device used at 0mm from Any Changes or modifications not expressly approved by the party responsible your body. for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. The device has been evaluated to meet general RF exposure requirement. exposure condition without restriction. The device can be used in portable The use distance is not more than 5mm. WARNING Operating frequency:2402MHz 2480MHzBT

-13-

-14-

WARRANTY Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!

Product Code Number Contact Number Product Information Customer Information Model Name Address Seller Information Name Contact Number Address Date of Sale Note:

Note: This form shall be sealed by the seller. Applicable Products The document applies to the products listed on the Product Maintenance lnformation

(see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached, etc.) are not included in this warranty scope. Warranty Period The warranty period of products and accessories is implemented according to the relevant Product Maintenance lnformation. The warranty period is calculated from the day(purchase date) when the product is bought for the first time, And the purchase date is considered as the date registered on the warranty card when buying the product. How to Get the Maintenance Service If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation. Inapplicable Cases The guarantee and service offered by this document are not applicable in the following cases: . The product or accessory has expired its warranty period; . Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; . Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; . The original identifying information of product or accessory is modified, alternated, or removed; . No valid warranty card; . Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; . Breakage or damage caused by force majeure or accident; . Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope. MAINTENANCE AND SERVICE SUPPORT INFORMATION The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Product Type Name Parts Circuit Board Battery Other Items Charger, Electrical Parts etc. Flash tube, modeling lamp, lamp body, lamp cover, locking device, package, etc. Maintenance Period (month) Warranty Service Type 12 3 12 NO Customer sends the product to designated site Without warranty Zeniko After-sale Service Call: +86-755-25106331

TPT LTE TUTNVUTMVWVAUATAN AUN NAVAN 02 0& oF os ov 2 oe dSOKTS\ Se Ae Ww SS 2% 09 08 02 o8 060b1L ot ge ee shag, 92 02 "o8 98 ODL a.m 7 G2 S% OF OS OOT OL oz Of OF O8 AB OL aE DEDDE OL TE LL g CEA. /, eal) HTT lia Vis Maas an aren 26 Or us Model: MR11 Wireless Charging Output: 5V=-1A USB-C Input: 5V-=2A 10W use-aOutput: 5V=1A Lithium Battery: 7.4V =3200mAh, 23.68Wh

(smartphone rig)3.7V== 30mAh, 0.111Wh(BT) FCC ID: 2BBSY001_ ta: 50C CE @

fates in China Zeniko Technology Co.,LTD Jinshan Building, Luohu, Shenzhen, China

Zeniko Technology Co.,LTD Section 2.911(d)(5)(i) Certification Equipment Type Company name: Zeniko Technology Co.,LTD Address: 1208 Room, Jinshan Building, No. 5033, Shennan East Road, Xinwei Community, Guiyuan Street, Luohu District, Shenzhen City Product Name: Smartphone Video Rig FCC ID: 2BBSY001 Model(s): MR11 2.911(d)(5)(i) Equipment Type We, [Zeniko Technology Co.,LTD] (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name: Hongwu Wen Date: 2023.12.12 Title and Company name:

Manager / Zeniko Technology Co.,LTD NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Zeniko Technology Co.,LTD Section 2.911(d)(5)(ii) Certification Applicant (Covered List ) Company name: Zeniko Technology Co.,LTD Address: 1208 Room, Jinshan Building, No. 5033, Shennan East Road, Xinwei Community, Guiyuan Street, Luohu District, Shenzhen City Product Name: Smartphone Video Rig FCC ID: 2BBSY001 Model(s): MR11 2.911(d)(5)(ii) Applicant filing We, [Zeniko Technology Co.,LTD] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Hongwu Wen Date: 2023.12.12 Title and Company name:

Manager / Zeniko Technology Co.,LTD NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/7001950.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case AOGES CO., LIMITED Section 2.911(d)(7) USA Agent for Service of Process Company name: Zeniko Technology Co.,LTD Address: 1208 Room, Jinshan Building, No. 5033, Shennan East Road, Xinwei Community, Guiyuan Street, Luohu District, Shenzhen City Product Name: Smartphone Video Rig FCC ID: 2BBSY001 Model(s): MR11 2.911(d)(7) USA Designated Agent for Service of Process We, [Zeniko Technology Co.,LTD] (the applicant) designate [AOGES CO., LIMITED]

NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Applicant Company name: AOGES CO., LIMITED USA Address: 1624 Market St, Ste 226,

#30327 Denver CO, 80202 USA FRN Number: 0033947847 Contact Name: XIAOYAN LAl Telephone No: +1 303 623 1940 Email: xiaoyanlai15@gmail.com Signature:

Title: CEO Date: 2023.12.12 Company name: Zeniko Technology Co.,LTD Address: 1208 Room, Jinshan Building, No. 5033, Shennan East Road, Xinwei Community, Guiyuan Street, Luohu District, Shenzhen City Grantee FRN Number: 0033918681 FCC Grantee Code: 2BBSY Contact Name: Hongwu Wen Telephone No: +86-0755-23210502 Email: whw@godox.com Signature:

Title: Manager Date: 2023.12.12 2.911 (d)(7)USA Agent v1.5 AOGES CO., LIMITED NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.5

Zeniko Technology Co.,LTD Agent Authorization Company: Zeniko Technology Co.,LTD Address: 1208 Room, Jinshan Building, No. 5033, Shennan East Road, Xinwei Community, Guiyuan Street, Luohu District, Shenzhen City Product Name: Smartphone Video Rig Model Number(s): MR11 Product Description: Smartphone Video Rig We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Hongwu Wen Title:

MANAGER Company: Zeniko Technology Co.,LTD Date: 2023.12.12

Zeniko Technology Co.,LTD Authorization Letter We,

(the approval holder) Company name Zeniko Technology Co.,LTD Address 1208 Room, Jinshan Building, No. 5033, Shennan East Road, Xinwei Community, Guiyuan Street, Luohu District, Shenzhen City declare that the following representative (agent):

Name (person) Eric Wang Company name Shenzhen CTA Testing Technology Co., Ltd. Addresss City Country Room 106,Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China Shenzhen China to act on our behalf on all matters concerning the application and documents submitted to Micom Labs for product certification below Product Description Smartphone Video Rig Type or Model(s) MR11 Tradename or Brand(s) Attestation:

City:

Date:

Name:

(this must be a person) Function:

Signature:

(or official company stamp) Shenzhen 2023.12.12 Hongwu Wen MANAGER

Zeniko Technology Co.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2BBSY001 Date: 2023.12.12 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Hongwu Wen Title: MANAGER