PLUS PLUS PLUS We back you up Brook Pocket PLUS PLUS PLUS PLUS 1 2 PLUS 1 PLUS
2 PLUS ON OFF PLUS ON OFF ON OFF PLUS ON OFF PLUS ON OFF Pair Pocket Auto Catch Reviver Plus with your phone 1. 1 2. 18 48 3. GO1 12 6 R 005-XXXXXX P / N: Plus M/N:ZPP0054, ZPP005T 2 0 2 1 1 0 V 3 1. Turn on your mobile Bluetooth. 2. Launch the Map View of Pokmon Go. Tap the Main Menu button. 3. Tap Settings at the top right. 4. Select Pokmon Go Plus in settings page. 5. Select Pokmon Go Plus 6. Waiting for pairing. When Pokmon Go Plus in avalible devices icon turns on, it means the pairing is completed. pairing successful unpaired Bluetooth ON Pokmon Go Plus Pokmon Go Plus Pokmon Go Plus Pokmon Go Plus Pokmon Go Plus Successfully connected to Pokmon Go Plus. Install the Pocket Auto Catch Reviver Plus Removing the Pocket Auto Catch Reviver Plus Insert one end of the Reviver Plus into the slot from the front of the wristband. 1 2 Press down on the other end with your thumb to push the Reviver Plus into the slot completely. 1 2 Remove the wristband from your wrist, hold on to each end and pull on the wristband until you see a small gap between the Reviver Plus and the wristband. Use your finger to pop the Reviver Plus out of its slot from the front side of the wristband. Charge Your Pocket Auto Catch Reviver Plus Press screen to check if the battery is in charging. USB Full Charged In charging Notice 1. A full charge takes approx. 1 hour and lasts for approx. 18 hours with contunuous use. And when it is full charged, you wont see charging graphic. 2. Standby time is approx. 48 hours. 3. This product will time out automatically every hour, so players have to reconnect it. We back you up Brook Pocket IMPORTANT Pocket Auto Catch Reviver Plus may fail to pair to device because of the update of Pokemon Go app, and the upgrade of Android and iOS. Product Liability Insurance included Application Support This Product is water resistant Tap the octagon while it is charging, the charging icon will display. If you dont see the charging icon, make sure Pocket Auto Catch Reviver Plus is placed firmly into the charging cable. Having difficulties pairing?
When your Pocket Auto Catch Reviver Plus has paired to other device, runs out of power or has any abnormality that it cannot be paired to your current device 1 2 3 Go to Bluetooth in Settings on the phone to remove/ clear Pokemon Go Plus. Go to the Settings in the game, excit/ clear Pokemon Go Plus. Then tap the octagon on Pocket Auto Catch Reviver Plus. When it pops up a new Pokemon Go Plus in the settings in the game, tap it to pair. Notice It's recommended to take off the Pocket Auto Catch Reviver Plus when doing intense activities. How to change the mode 1. Touch the octagon to switch between modes. 2. Long press the octagon for 3 seconds to turn ON
/ turn OFF that mode. Auto-collect Pokstop ON OFF Catching/ Caught Pokmon ON OFF Auto-catch Pokmon Auto-catch ON Auto-catch OFF Auto-catch new Pokmon ONLY / ON Auto-catch new Pokmon ONLY / OFF New Pokmon discovered Duplicate Pokmon found Waiting Pokmon caught Pokmon not caught Auto-catch new Pokmon ONLY ON OFF Pokstops ON OFF Vibration alerts Auto-collect Pokstop ON Auto-collect Pokstop OFF Pokstop in range Pokstop not in range Pokstop items collected Pokstop items not collected x2 Pokstop items collected x3 Pokstop items collected x4 Pokstop items collected 5+
Pokstop items collected Disconnect Vibration ON OFF Other Alerts Device pairing status paired not paired If Pocket Auto Catch Reviver Plus fails to pair to the device and displays not paired, please go to Bluetooth in Settings on the device to remove/ clear Pokemon Go Plus, then pair it again in the game. Vibration alerts ON Vibration alerts OFF Device pairing paired Device pairing not paired Out of Pokballs Pokmon is full Disconnect Vibration ON Disconnect Vibration OFF Disconnect Battery Capacity Display Charging Startup Screen FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For the latest user guide and more information, visit Brooks website. FCC ID: 2ADKM005T P/N Pocket Auto Catch Reviver Plus M/NZPP0054 ZPP005T For more details please visit our official website at www.brookaccessory.com Version 2 0 2 1 1 0 V 3 GO-TCHA Instruction We back you up Brook Gaming Brook Pocket 1. 2. Pokmon Go App 3. 4. Pokmon Go Plus 5. Pokmon Go Plus 6. Bluetooth ON Pokmon Go Plus Pokmon Go Plus Pokmon GO App Android iOS Pocket Auto Catch Reviver Plus Brook APP Pokmon Go Plus Pokmon Go Plus Pokmon Go Plus Pokmon Go Plus
USB Reviver Plus 1 2 Reviver Plus 1 Reviver Plus 2 Reviver Plus USB 1. 1 2. 18 48 3.
Pokmon go plus 1
( Pokmon go plus ) 2 Pokmon go plus Pokmon 3 go plus 1. 2. 3
2 3 4 5 Pokemon Go Plus, 1. -20~ 45 2. 10~ 35 Pokmon Go app Iphone 6S IOS 12 4GB RAM 4.0 7.0 Nintendo, The Pokmon Company Niantic Brook CCXXxxLPyyyZzW P/N Pocket Auto Catch Reviver Plus M/NZPP0054 ZPP005T Brook www.brookaccessory.com 2 0 2 1 1 0 V 3 GO-TCHA Instruction Brook Pocket 1. Bluetooth ON 2. 3. 4. 5. 6 . Pokmon Go Plus
. Pokmon Go Plus Pokmon Go Plus Pokmon Go Plus Pokmon Go Plus Pokmon Go Plus Plus Plus Pokmon GO App Android, iOS Plus
. IPX 6
. 2 Plus
. 1 2 Plus
. USB 1. 1 18
. 2. 48
. 1 2 3 3. Pokmon GO 1
. Pokemon GO Plus . Pokmon Go []-[Pokmon GO Plus]
. Pokmon GO Plus
2 3 4 5 1. : -20 C ~ 45 C 2. : 10 C ~
35 C Pokmon Go Bluetooth
. 6S iOS Ver. 12
. 4GB RAM . Bluetooth Smart (Bluetooth Ver. 4.0
) Android Ver. 7.0
. Nintendo, The Pokmon Company or Niantic
. R-R-ZP0-ZPP005T P/N Plus M/NZPP0054 ZPP005T www.brookaccessory.com . Version 2 0 2 1 1 0 V 3 Pokemon GO Plus
. Plus
. 1
. 1. Plus
. 2. Plus 3