FCC ID: 2ADKMKM005A BROOK WingMan-XE Converter

Wingman XE LED Display Connecting to the Device Connection Pairing Supplementary Instructions Corresponding Buttons List for PS4, Xbox360 and XboxOne Game Pads PS4 Game Pad Xbox360 Game pad XboxOne Game pad D-Pad (U/D/L/R) Lx / Ly Rx / Ry A B X Y LB RB LT RT LSB RSB A B X Y LB RB LT RT LSB RSB L1 R1 L2 R2 L3 R3 OPTIONS START MENU SHARE PS Key BACK+ START VIEW+ MENU Xbox Guide Key Xbox Guide Key TouchPad Key BACK VIEW XE CONVERTER X360, X1, Xbox Elite 1, Xbox Elite 2 PS4 Xbox button Port indicator USB port can be used to connect to PS4 or PC. LED Button S 4 P LED Xbox Elite Series2 LED Button Simply connect to wired Xbox360 / Xbox One controller to use. Also supports relevant Xbox 360 / Xbox One peripheral accessories. Each Wingman XE can only connect to a single Xbox 360 / Xbox One device. Wingman XE supports most of the accessories that are compatible with original factory specifications. To expand the number of supported accessories, firmware will be updated irregularly. Xbox 360 wireless receiver Xbox 360 Xbox One Xbox Elite wired Xbox One

(BT Model) Xbox Elite Series2 PS4 wireless Xbox Fighting Stick

(Xbox One/ Xbox 360) Xbox Adaptive Controller PC

(Direct-Input) Hold the R Stick to the left, then press BACK. Hold the R Stick to the left, then press VIEW. SHARE OPTIONS SHARE OPTIONS Hold the R Stick to the right, then press BACK. Hold the R Stick to the right, then press VIEW. SHARE OPTIONS SHARE OPTIONS SHARE OPTIONS SHARE OPTIONS 2 2 Xbox One 1 Xbox One X B Y A 1 X B Y A X B Y A X B Y A Xbox One Press VIEW. 1 2 Xbox One

PS4 PS4 PS4 PS4 B A C K START 1 Xbox 360 2 2 B A C K START 1 Xbox 360 B A C K START Xbox 360 Press BACK. 1 2 B A C K START Xbox 360

PS4 PS4 PS4 PS4 Lighting Status Blue LED Permanently on The connector and the device are currently connected. Blue LED Slow blinking

(Once every two seconds) Blue LED Fast blinking Red LED Blinking Wired device is not connected Wireless device is searching for connection Wireless connection mode is ON. Searching for pairing device Turbo-Remap button is being pressed Red LED Permanently on Entering Turbo-Remap Settings step.1 Insert Wingman XE into the PS4 console USB port. Slow blinking of the Blue LED indicates that the connection to the console is successful. step. 2 Wired Connection:

Connect the X360/X1 wired controller or game pad to Wingman XE through the USB port. Using a X360 wireless controller:

Simply connect the X360 wireless receiver to the Wingman XE through the USB port. Wireless Connection:

Connect the Xbox One wireless controller (Bluetooth model) or the Xbox One Elite Series 2 to the Wingman XE and the controller will be ready for use. When connecting, hold the LED buttons at the two sides of the Wingman XE for 1 second to enter wireless connection mode. Then press the Pair button on the wireless controller to begin pairing. Fast blinking of Blue LED indicates that pairing is in progress. step.1 Holding the LED buttons on the two sides of the Wingman XE for 1 second will activate wireless connection pairing mode. The Wingman XE will engage in pairing with surrounding Bluetooth devices. The pairing mode will end if:

A. The connection pairing with the wireless controller is successful. B. The connection pairing is unsuccessful after 1 minute. C. The LED buttons are held for 1 second. step. 2 Wireless connection records between an Xbox One wireless control-

ler (with Bluetooth function)/Xbox One Series 2 and the Wingman XE will be erased if a wired connection is used. Wireless connection re-pairing will be required if wireless connection is used. step. 3 If Xbox One Elite Series 2 controller is used, please turn off controller profile settings to prevent interference with Wingman XEs Turbo or Remap settings. As Xbox One Elite Series 1 controller is incapable of turning off profile settings, using Xbox One Elite Series 1 controller might result in Remap function overlapping. RB RT LB LT Pair button step. 3 Check whether the two Blue LEDs at the sides of the Wingman XE are permanently on. This indicates that the connection is completed. FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Ambient Operating Temperature ......................0 to +50 Buttons that can be set as Turbo function buttons include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB 10 (hereinafter referred to as FK) Buttons that can be Remap include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB 10 (hereinafter referred to as FK) Step 1. Enter setting mode:

Press VIEW + Xbox Guide, the RED LED of the Wingman XE will be permanently on. Step 1. Enter setting mode:

Press MENU + Xbox Guide, the RED LED of the Wingman XE will be permanently on. Step 2. Choosing a FK button: (e.g. Setting A as turbo function) Step 2. Choosing a FK button: (e.g. Setting X as A+B) Press X Hold VIEW, then press A Step 3. Completing Setting Mode:

Step 3. Choosing button to be set:

Hold VIEW, then press A + B. Release all buttons, then press MENU to save settings. Step 4. Completing setting mode:

Release all buttons, then press MENU to save settings. the receiver is connected. Step 4. Exit setting mode:

Press Xbox Guide, the BLUE LED of the Wingman XE will be permanently on. Step 5. Exit setting mode:

Press Xbox Guide, the BLUE LED of the Wingman XE will be permanently on. Cancelling Turbo Function Step 1. Enter setting mode:

Press VIEW + Xbox Guide, the RED LED of the Wingman XE will be permanently on. Cancelling Button Remap Settings Step 1. Enter setting mode:

Step 2. Erasing all Turbo function buttons Press VIEW + MENU Step 3. Exit setting mode:

Step 2. Erasing all settings for Button Remap Settings. Press VIEW + MENU. Step 3. Exit setting mode:

Press MENU + Xbox Guide, the RED LED of the Wingman XE will be permanently on. FCC ID: 2ADKM005A Press Xbox Guide, the BLUE LED of the Wingman XE will be permanently on. Press Xbox Guide, the BLUE LED of the Wingman XE will be permanently on. For more details please visit our official website at www.brookaccessory.com R 005-102467 P/N: Wingman XE M/N: ZPP005A, ZPP005C, ZPP005D, ZPP005F 202006V2 11 3 9 Touch Pad Simulation Function Touch Pad Simulation Function Turbo Function Settings Button Remap Settings Using the Xbox 360 controller:

Using the Xbox One controller:

BACK + R Stick can simulate the PS4s Touchpad button. BACK + START can simulate the PS4s SHARE button. VIEW + R Stick can simulate the PS4s Touchpad button. VIEW + MENU can simulate the PS4s SHARE button. The following instructions are based on the Xbox One controller. For those using an Xbox 360 controller, please refer to the Corresponding Buttons List for PS4, Xbox360 and XboxOne Game Pads. The following instructions are based on the Xbox One controller. For those using an Xbox 360 controller, please refer to the Corresponding Buttons List for PS4, Xbox360 and Xbox One Game Pads. SHARE OPTIONS SHARE OPTIONS Turbo Function Settings Button Remap Settings Hold the BACK, then press START. 7 Hold the VIEW, then press MENU 8 10 12 1 2 4 5 6 Wingman XE LED LED LED LED LED LED Turbo-Remap Turbo-Remap step.1 Wingman XE PS4 USB LED step.1 WingmanXE LED 1 X360/X1 USB Wingman XE X360 X360 Wingman XE USB step. 2 A. B. C. LED 1 step. 2 Xbox One Xbox One Wingman XE Xbox One Xbox One Wingman XE Wingman XE LED 1 LED step. 3 Xbox One Profile Wingman XE Turbo Remap Xbox One Profile Remap XE LED LED CONVERTER X360, X1, Xbox Elite 1, Xbox Elite 2 PS4 Xbox Player USB PS4 PC S 4 P LED Xbox Elite Series2 Xbox 360 / Xbox One Xbox 360 / Xbox One Wingman XE Xbox 360 / Xbox One Wingman XE Xbox 360 wireless receiver Xbox 360 Xbox One Xbox Elite wired Xbox One

(BT Model) Xbox Elite Series2 PS4 wireless Xbox Fighting Stick

(Xbox One/ Xbox 360) Xbox Adaptive Controller PC

(Direct-Input) RB RT LB LT Wingman XE LED step. 3

PS4, Xbox360, XboxOne PS4 Xbox360 XboxOne D-Pad (U/D/L/R) Lx / Ly Rx / Ry L1 R1 L2 R2 L3 R3 A B X Y LB RB LT RT LSB RSB A B X Y LB RB LT RT LSB RSB OPTIONS START MENU SHARE PS BACK+ START VIEW+ MENU Xbox Xbox BACK VIEW 1 2 4 5 6 Xbox 360 Xbox One Xbox One Xbox 360 Xbox One Xbox 360 Back PS4 VIEWPS4 Back START PS4 SHARE VIEWMENUPS4 SHARE SHARE OPTIONS SHARE OPTIONS Hold the R Stick to the left, then press BACK. Hold the R Stick to the left, then press VIEW. SHARE OPTIONS SHARE OPTIONS Hold the R Stick to the right, then press BACK. Hold the R Stick to the right, then press VIEW. SHARE OPTIONS SHARE OPTIONS 2 2 Xbox One 1 Xbox One X B Y A 1 X B Y A X B Y A X B Y A Xbox One Press VIEW. 1 2 Xbox One

PS4 PS4 PS4 PS4 B A C K START 1 Xbox 360 2 2 B A C K START 1 Xbox 360 B A C K START Xbox 360 Press BACK. 1 2 B A C K START Xbox 360

PS4 PS4 PS4 PS4 SHARE OPTIONS SHARE OPTIONS ABXYLBRBLT ABXYLBRBLT RTLSBRSB 10FK RTLSBRSB 10FK Step 1. Step 1. VIEW + Xbox Guide Wingman XE LED MENU + Xbox Guide Wingman XE LED Step 2. FK :(A Turbo Step 2. FK :(X A + B VIEW A X Step 3. MENU Step 3. VIEW A + B Step 4. Step 4. Xbox Guide Wingman XE LED MENU Step 5. Xbox Guide Wingman XE LED Step 1. VIEW + Xbox Guide Wingman XE LED Step 1. Step 2. Turbo VIEW + MENU Step 3. Xbox Guide Wingman XE LED MENU + Xbox Guide Wingman XE LED Step 2. VIEW + MENU Step 3. Xbox Guide Wingman XE LED Brook www.brookaccessory.com P/N: Wingman XE M/N: ZPP005A, ZPP005C, ZPP005D, ZPP005F 202006V2 11 3 9 Hold the BACK, then press START. 7 Hold the VIEW, then press MENU 8 10 12 PS4, Xbox360, XboxOne PS4 Xbox360 XboxOne D-Pad (U/D/L/R) Lx / Ly Rx / Ry L1 R1 L2 R2 L3 R3 A B X Y LB RB LT RT LSB RSB A B X Y LB RB LT RT LSB RSB OPTIONS START MENU SHARE PS BACK+ START VIEW+ MENU Xbox BACK Xbox VIEW Wingman XE LED LED LED LED LED LED Turbo-Remap Turbo-Remap step.1 Wingman XE PS4 USB LED step.1 WingmanXE LED 1 step. 2 X360/X1 USB Wingman XE X360 X360 Wingman XE USB Xbox One Xbox One Wingman XE Wingman XE LED 1 LED A. B. C. LED 1 step. 2 Xbox One Xbox One Wingman XE step. 3 Xbox One Profile Wingman XE Turbo Remap Xbox One Profile Remap XE LED LED CONVERTER X360, X1, Xbox Elite 1, Xbox Elite 2 PS4 Xbox Player USB PS4 PC S 4 P LED Xbox Elite Series2 Xbox 360 / Xbox One Xbox 360 / Xbox One Xbox 360 / Xbox One Xbox 360 / Xbox One Wingman XE Xbox 360 / Xbox One Wingman XE Xbox 360 wireless receiver Xbox 360 Xbox One Xbox Elite wired Xbox One

(BT Model) Xbox Elite Series2 PS4 wireless Xbox Fighting Stick

(Xbox One/ Xbox 360) Xbox Adaptive Controller PC

(Direct-Input) RB RT LB LT step. 3 Wingman XE LED Xbox 360 Xbox One Back PS4 Back START PS4 SHARE VIEWPS4 VIEWMENUPS4 SHARE Xbox One Xbox 360 Xbox One Xbox 360 SHARE OPTIONS SHARE OPTIONS Hold the R Stick to the left, then press BACK. Hold the R Stick to the left, then press VIEW. SHARE OPTIONS SHARE OPTIONS Hold the R Stick to the right, then press BACK. Hold the R Stick to the right, then press VIEW. SHARE OPTIONS SHARE OPTIONS 2 2 Xbox One 1 Xbox One X B Y A 1 X B Y A X B Y A X B Y A Xbox One Press VIEW. 1 2 Xbox One

PS4 PS4 PS4 PS4 B A C K START 1 Xbox 360 2 2 B A C K START 1 Xbox 360 B A C K START Xbox 360 Press BACK. 1 2 B A C K START Xbox 360

PS4 PS4 PS4 PS4 SHARE OPTIONS SHARE OPTIONS ABXYLBRBLT RTLSBRSB 10FK ABXYLBRBLT RTLSBRSB 10FK Step 1. Step 1. VIEW + Xbox Guide Wingman XE LED MENU + Xbox Guide Wingman XE LED Step 2. FK :(A Turbo Step 2. FK :(X A + B VIEW A X Step 3. MENU Step 3. VIEW A + B Step 4. Step 4. Xbox Guide Wingman XE LED MENU Step 5. Xbox Guide Wingman XE LED Step 1. VIEW + Xbox Guide Wingman XE LED Step 1. Step 2. Turbo VIEW + MENU Step 3. Xbox Guide Wingman XE LED MENU + Xbox Guide Wingman XE LED Step 2. VIEW + MENU Step 3. Xbox Guide Wingman XE LED 3 9 Hold the BACK, then press START. 7 Hold the VIEW, then press MENU 8 10 12 P/N: Wingman XE M/N: ZPP005A, ZPP005C, ZPP005D, ZPP005F Brook www.brookaccessory.com 202006V2 11 1 2 4 5 6

Company Letter Authority to Act as Agent Date: 2020-2-21 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern:

I appoint TUV Rheinland Taiwan Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Zeroplus Technology Corporation / 3F .No.121, Jian 8th Rd. Chung Ho District New Taipei City, 235, Taiwan For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 12 months By : we Tim Huang am Huang

(Signatur (Print Name) Title : Manager Telephone: +886 2 66202225x323 ee On behalf of: Zeroplus Technology Corporation ee

(Company Name) QF094234 Page 1 of 1 Revision 0

{This letter must be prepared on applicant/manufacturer letterhead}

Confidentiality Letter Date: 2020-07-02 Subject: Confidentiality Request for FCC ID: ADKM005A;

Pursuant to FCC 47 CRF 0.457(d) and 0.459, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit CJ Short Term KX] Permanent Block Diagrams

[_] Short Term External Photos

(] Short Term [_] Permanent Internal Photos

[_] Short Term Xl Permanent Operation Description/Theory of Operation LJ Short Term IX] Permanent Part List/Tune-Up Procedure

(J Short Term x] Permanent Schematics

(J Short Term Test Setup Photos

(J Short Term [_] Permanent Users Manual Zeroplus Technology Corporation has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-

1705. Sincerely, By: Ton Hua lox L Tim Huang cae nee (Print name)

q uoneuews QORJLOIUE PEP [eIIIP amp ur pur s1aq}

SYOINPOYA IoHIUUSMETL TY 9 oAoge post s[>q AsooddZ asi OVW) THT, gcc /]

y Ws as JoyeUroWes oY} are suOTOUN TY KINU [OPOUT OY} Ul O1B SOOUDIOLJIP OY, Teonuepy ATTROENOATA OUI OY} JOF FEY} WIFUOS IYIMaIOY a Ajue|TuIIg Uo WONEIE[DAq, WddZ OS00ddZ VS00ddZ S19POW. VSOONACV CI OOS 9F01Z GIN eIquINJoD Ped SILA PuBPIEO SEbL DISSTUMWOD SUOTBOTUNUMUOD JeIEpe,]

oz-une-TT