FCC ID: 2ADKM0067 Pocket Auto Catch Light

Product Description IMPORTANT 1P connection button

& RGB signal display 2P connection button

& RGB signal display Type-C charging port 1. Having difficulties pairing?

When your Pocket Auto Catch Plus has paired to other device, runs out of power or has any abnormality that it cannot be paired to your current device. Go to Bluetooth in Settings on the phone to remove/ clear Pokemon Go Plus. Go to the Settings in the game, excit/ clear Pokemon Go Plus. Then tap the red circle on Pocket Auto Catch Plus. When it pops up a new Pokemon Go Plus in the settings in the game, tap it to pair. 2. 3. Pair Pocket Auto Catch Light with your phone Product Liability Insurance included Application Pocket Center Support This Product is NOT water resistant Pocket Auto Catch Light may fail to pair to device because of the update of Pokemon Go app, and the upgrade of Android and iOS. unpaire pairing successful Successfully connected to Pokmon Go Plus 1. Turn on your mobile Bluetooth. 2. Launch the Map View of Pokmon Go. Tap the Main Menu button. 3. Tap Settings at the top right. 4.Select Connected Devices and Services in settings page 5. Select Pokmon Go Plus in settings page. 6. Select Pokmon Go Plus in avalible devices 7. Waiting for pairing. When Pokmon Go Plus icon turns on, it means the pairing is completed. Charge Your Pocket Auto Catch Light 2.Confirm 1P connection button indicator light In charging The green, red, and blue lights flash alternately Notice 1. It takes about 60 minutes to fully charge, and can last for approximately 15 hours of continuous use. When fully charged, the indicator light will show as white. 2. Standby time is approx. 5 day. Full Charged White Light 3. Pocket Auto Catch Light will time out automatically every hour, so players have to reconnect it. 1.Insert the cable into the USB-C port Connection Pairing Indicator Lights Light Status Green flashing Purple Red flashing Awaiting bluetooth connection Connection successful Phone unable to connect to Internet Game Status Indicator Lights Light Status Green Yellow flashing White flashing Duplicate Pokmon found New Pokmon discovered Waiting The green, red, and blue lights flash alternately Pokmon caught Red flashing Blue flashing Red Pokmon not caught Pokstop in range Pokstop not in range The green, red, and blue lights flash alternately Pokstop items collected Red Red flashing White The green, red, and blue lights flash alternately White Red flashing Pokmon is full Out of Pokballs Bag is full Charging Battery Capacity Display Low power FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. FCC ID:2ADKM0067 IC ID:29174-ZPP006 7 P/NPocket Auto Catch Light M/NZPP0067 For more details please visit our ocial website at www.brookaccessory.com Version 202303V1

Zeroplus Technology Corporation 3F, No.121, Jian 8th Rd, Chung Ho District New Taipei City, 235, Taiwan Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-4-19 To whom it may concer:

We, Zeroplus Technology Corporation, hereby certify that the equipment for which authorization is sought (FCC ID: 2ADKMO067) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (httos://www foc. gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and ()(5) and (6). Sincerely, wo ag Signature Tim Huang Manger Zeroplus Technology Corporation The information provided inthis eter is based on the referenced rle parts of Tile 47 of the CFR as well as KDB 986446 DOI.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2023-4-19>

Pursuant to Paragraphs 0.457 and 0.459 of the Commission's Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID Model name 2ADKM0067 ZPPO067 For the product stated above, we request that the following information be held confidential;

Long-Term Exhibits Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days Extemal Photos Internal Photos. Block Diagram Schematics Test Setup Photos:

User's Manual Parts List Tune Up BoOkOAaRRoOo Operational Descriptions:

Dopooo0ol The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Tim Huang/Manger Zeroplus Technology Corporation 3F, No.121, Jian 8th Rd, Chung Ho District New Taipei City, 235, Taiwan Phone: +886 2 66202225x323 Fax: +886 2 22235626 E-Mail: timhuang@zeroplus.com.tw

Zeroplus Technology Corporation 3F, No.121, Jian 8th Rd, Chung Ho District New Taipei City, 235, Taiwan Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-4-19 To whom it may concer:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act.on our behaffin all matters relating to applications for equipment authorization FCC ID: 2ADKMO0067 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, lm ag Name/Title: Tim Huang/Manger Company Zeroplus Technology Corporation Address: 3F, No.121, Jian 8th Rd, Chung Ho District New Taipei City, 235, Taiwan Phone: +886 2 66202225x323 Fax: +886 2 22235626 E-Mail: timhuang@zeroplus.com.tw

Zeroplus Technology Corporation Attention: Application Examiner Re: Certification designating a U.S. agent for service of process pursuant to section 2.91 1(d)(7) of the FCC rules To whom it may concern, This letter is to confirm both TianHeng Consulting, LLC (Agent) and Zeroplus Technology Corporation

(Applicant) acknowledge consent to obligations of each party pursuant to 47 CFR part 2.911(d)(7) of the FCC rules in regard to the agent for service of process. I, Zeroplus Technology Corporation HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant. I further acknowledge the requirement to maintain an agent extends for no less than one year after the termination of all marketing and importation or the conclusion of and commission-related proceeding involving the equipment and agree to immediately notify the FCC and Intertek if there is any change in the status identified above. Applicant Company Name : Zeroplus Technology Corporation Contact Name : Tim Huang Address : 3F., No.121, Jian 8th Rd., Chung Ho District, New Taipei City Telephone No : +886 2 66202225 Email : timhuang@zeroplus.com.tw FCC ID : 2ADKM0067 Applicant FRN : 0024075343 Signature: HA Date: 0 the ~2 :

I, Hualing Dong HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Agent. I consent to the obligation to accept service of process on behalf of the applicant in regard to the FCC ID designated above. Agent Company Name : TianHeng Consulting, LLC Contact Name : Hualing Dong Address : 392 Andover Street, Wilmington, MA 01887, United States Telephone No : +1 617-997-4010 Email : tianhengconsulting@gmail.com Agent FRN : 0033401258 Signature:

Date:

Form: RFT-AMER-TCB-OP-190 Revision: 1 Page 1 of 1 Date: 1/25/2023