FCC ID: 2A9QY-FL125B LED Video Light

LED Video Light User Manual Foreword Thank you for purchasing our LED video light. Please read this manual carefully before using the unit. Have a great experience!

Remark: This manual use for daylight and Bi-color devices Safety Precautions 1. Please remove the protective cap on the light before using. 2. Keep the light safely stored and away from children. 3. Care must be taken to avoid burns when touching hot parts. 4. Do not operate equipment with damaged power cords and equipment that has been dropped or damaged until inspected by qualified service personnel. 5. Always unplug appliances from the electrical outlet before cleaning and servicing and when not in use. Never pull the cord to unplug the plug from the outlet, grab the plug and pull to unplug. 6. To reduce the risk of electric shock, do not immerse this product in water or other liquids 7. To reduce the risk of electric shock, do not disassemble this product and take it to a qualified service person when service is required. Improper reassembly may cause electric shock during subsequent use of the device. 8. When the product is working, do not block the heat dissipation holes, and do not look directly at the lamp beads; when the lamp is used for a long time, the surface temperature of the lamp is high, please pay attention to prevent scalding 9. Do not touch the lamp beads any circumstances. 10. Do not place this product near flammable and volatile solvents to avoid damage to the product. 11. Please clean the device with a soft, dry cloth. 12. Do not use this device in a humid environment, otherwise there is a risk of short circuit or electric shock. 13.Please ensure that the device has cooled down before installing or removing reflector or protective cover. 1 Key Features Light control integration, more convenient dimming 2-inch LCD screen, real-time display the data High color rendering index, restore true colors Daylight and Bi-color (optional), meet the needs of diverse scenarios 10 Special effects to create a variety of atmosphere and lighting effects Bowens mount design, compatible with various Bowens accessories Supports iOS/Android system APP (Feelworld Light), easily wireless Bluetooth control Exquisite carrying case, well storage and protection 2 CONTENTS 1. Product Structure and Instruction ---------------------------- 4 2. Power Input Method ----------------------------------------------- 5 3. Installation and Removal ---------------------------------------- 6 3.1 Protection cap installation and removal ---------------------- 6 3.2 Reflector installation and removal ----------------------------- 6 3.3 Light frame installation and removal -------------------------- 7 4. Operation Instruction --------------------------------------------- 7 5. APP Instruction ----------------------------------------------------- 9 5.1 APP Download ------------------------------------------------------ 9 5.2 APP Connection --------------------------------------------------- 10 5.3 APP Operation ----------------------------------------------------- 11 6. Product Specification -------------------------------------------- 13 7. Illumination ---------------------------------------------------------- 14 8. General Fault Detection and Diagnosis -------------------- 15 3 1. Product Structure and Instruction 4 1. Lamp Bean: COB lamp bean 2. Bowens Mount: use for install protection cap, reflector or other Bowens accessories 3. Lock Catch: use for removal protection cap, reflector or other Bowens accessories 4. Carry Handle: use for carry the device 5. Soft Light Umbrella Mounting Hole: use for install soft light umbrella (soft light umbrella not including) 6. Soft Light Umbrella Lock Knob: use for fixing the soft light umbrella 7. LCD Display: display the data 8. Bluetooth Connect Button: use for device connect to APP 9. Right Knob: user for function selection and language setting 10. Power Switch: Turn on/off the device 11. Angle Fixing Handle: Loosen the handle to adjust the pitch angle of the lamp,and fix it after adjusted 12. Light Frame Interface: the interface of fixing the device on the bracket 13. Lamp Holder Fixing Knob: use for fixing the device on the bracket 14. Adapter Interface: power input interface 15. Left Knob: use for adjust the brightness or color temperature 2. Power Input Method The device power by 3 pin XLR interface power supply. Polarity of the 3-pin XLR power input as below image, please note the polarity of the power input, otherwise it may damage the device. 5 3. Installation and Removal 3.1 Protection cap installation and removal

. When installing the protection cap, align the protective cover with the Bowens mount points, rotate the protective cover, and fasten the protective cover to the lamp body. When removing the protection cap, press down the lock catch and rotate the protection cap at the same time to take out the protection cap. Note: Be sure to remove the protection cap before using the lamp 3.2 Reflector installation and removal

. When installing the reflector, align the reflector with the Bowens mount points, rotate the reflector, and fasten the reflector to the lamp body. When removing the reflector, press down the lock catch and rotate the 6 reflector at the same time to take out the reflector. 3.3 Light frame installation and removal The lamp can be installed and fixed on the bracket by rotating the knob clockwise, and unloaded by rotating in the counterclockwise direction 7 4. Operation Instruction Daylight Connecting Power, turn on the power switch Rotate the left knob (Brightness) to adjust the brightness Brightness: 0~100%

Rotate the right knob (Frequency) to adjust the mode or frequency, press to select the mode or frequency Mode: Normal, Paparazzi, Fireworks, Lighting, Fault Bulb, TV, Breath, Flash, Party, Flame, Music Frequency: 0~10 Remark: each device has a ID number Language Select: Long press the right knob (Frequency) to display the language select interface, rotate the right knob to select and short press to confirm. 8 Bi-color Connecting Power, turn on the power switch Rotate the left knob (Brightness) to adjust the brightness or color temperature Brightness: 0~100%

Color Temperature Range: 2700K~6500K Rotate the right knob (Frequency) to adjust the mode or frequency, press to select the mode or frequency Mode: Normal, Paparazzi, Fireworks, Lighting, Fault Bulb, TV, Breath, Flash, Party, Flame, Music Frequency: 0~10 Remark: each device has a ID number Language Select: Long press the right knob (Frequency) to display the language select interface, rotate the right knob to select and short press to confirm. 9 5. APP Instruction 5. 1 APP Download iOS APP Download Android APP Download iOS user search feelworld light in App Store to get Android user search feelworld light in Google Play to get or scan the QR code to download 5.2 APP Connection (e.g. Android System) After installing the APPplease register according to the prompts. Open the APP, click

"Scanner" and long press the "Bluetooth Reset"

button on the device until the scanned device name as shown on the right is displayed on the APP, then click to tick and connect. After connection is successful, the Bluetooth icon will be displayed on the device screen. Note: Please make sure the Bluetooth and 10 Position Information of smartphone is turning on before scan the device. When you need to reconnect after disconnection,click "Light" and select the desired connected device in the light list, click "Connect Device" to connect. 5.3 APP Operation (e.g. Android System) After connecting, click "Scene" on the APP, and click the device name. Then you can control the color temperature, brightness, special effects, etc. for the light. 11 Click WHITE LIGHT can adjust the color temperature or brightness Remark: the daylight device cant adjust the color temperature Click LIGHTING EFFECTS to select the effect and adjust the color temperature, brightness and frequency 12 Click QUICK ADJUST can quick adjust the single device or all devices Click System to select the language 6. Product Specification Power Consumption Working Current Input Voltage Adapter Input Voltage Color Temperature CRI TLCI Dimming APP Control Way 12.6A@DC 20V 125W Max:150W 225W Max:225W 7.8A@DC 19V DC12~34V AC100~240V50/60Hz Daylight 5600K (200K) Bi-color 2700K-6500K (200K) 96+

98+

0~100 Bluetooth 13 Cooling Method Product Size Product Weight Active Cooling Lamp Framew/o protection cap 221x105x180mm 1.53kg 7. Illumination 7.1 The illumination of 1M for daylight device Light Only Power 125W 225W With Reflector Power 125W 225W Color Temp 5600K 5600K Color Temp 5600K 5600K Illumination 5150lux/478fc 8250lux/766fc Illumination 48500lux/4506fc 67500lux/6271fc 7.2 The illumination of 1M for bi-color device Light Only Power 125W 225W Color Temp 2700K 3200K 5600K 6500K 2700K 3200K 5600K 6500K Illumination 2650lux/246fc 3400lux/316fc 4250lux/395fc 3700lux/344fc 4800lux/446fc 6150lux/571fc 7950lux/738fc 6950lux/646fc With Reflector Power 125W Color Temp 2700K Illumination 23500lux/2183fc 14 225W 3200K 5600K 6500K 2700K 3200K 5600K 6500K 30100lux/2796fc 37600lux/3493fc 32600lux/3029fc 39800lux/3698fc 49500lux/4599fc 64500lux/5992fc 56500lux/5249fc 8. General Fault Detection and Diagnosis 8.1 The light wont start up

. Please check whether there is loose connection between the power adapter and the power cable or the power adapter and the outlet. Please check whether the voltage of power adapter is within designated range 8.2 LCD display is on but no light output COB light bean or main board might be damaged. If there are still other problems, please contact with our related technologists. 15 FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 16

Reference No.: WTX22X11232385W001 Page 1 of 12 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

ZHANGZHOU LAISHIKE ELECTRONIC TECHNOLOGY CO.,LTD 3#B503 GREEN LAKE PLAZA , No.1 HUBIN ROAD, LONGWEN DISTRICT, ZHANGZHOU, FUJIAN, China Date: 2023-02-08 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (i) Filing SUBJECT: FCC Application for FCC ID: 2A9QY-FL125B To Whom It May Concern:

ZHANGZHOU LAISHIKE ELECTRONIC TECHNOLOGY CO., LTD certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signatory

[Yanjun Zhuang, Sales Manager]

Yanjan 207)

ZHANGZHOU LAISHIKE ELECTRONIC TECHNOLOGY CO.,LTD 3#B503 GREEN LAKE PLAZA , No.1 HUBIN ROAD, LONGWEN DISTRICT, ZHANGZHOU, FUJIAN, China Date: 2023-02-08 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (ii) Filing SUBJECT: FCC Application for FCC ID: 2A9QY-FL125B To Whom It May Concern:

ZHANGZHOU LAISHIKE ELECTRONIC TECHNOLOGY CO.,LTD certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signatory

[Yanjun Zhuang, Sales Manager]

Yanjun Zhuang

a ZHANGZHOU LAISHIKE ELECTRONIC TECHNOLOGY CO.,LTD 3#B503 GREEN LAKE PLAZA , No.1 HUBIN ROAD, LONGWEN DISTRICT, Date: 2023-02-01 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2A9QY-FL125B Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commission's rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Block Diagram CL] Tune-Up Information Operational Description (J Security Information XX] Schematics L] Software Defined Radio (SDR) Information C1] Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

CL] External Photos C1 _ Test Setup Photos C1 Internal Photos (1 + User Manual L] For 45 days, pursuant to Public Notice DA 04-1705. or L] For 180 days pursuant to KDB 726920 DO1. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signatory

[Yanjun Zhuang, Sales Manager]

Vaunyan Zhuar / .

ZHANGZHOU LAISHIKE ELECTRONIC TECHNOLOGY 3#B503 GREEN LAKE PLAZA , No.1 HUBIN ROAD, LONGWEN DISTRICT, ZHANGZHOU, FUJIAN, China Date: 2023-02-01 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC Application for FCC ID: 2A9QY-FL125B To Whom It May Concern:

|, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B Other Non-Digital SDoC Devices. | understand the following FCC requirements:

1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage:

https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the Users Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Sincerely, Signatory

[Yanjun Zhuang, Sales Manager]

eng hua

ZHANGZHOU LAISHIKE ELECTRONIC TECHNOLOGY CO.,LTD 3#B503 GREEN LAKE PLAZA , No.1 HUBIN ROAD, LONGWEN DISTRICT, ZHANGZHOU, FUJIAN, China Date: 2023-02-01 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2A9QY-FL125B POWER OF ATTORNEY To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, ZHANGZHOU LAISHIKE ELECTRONIC TECHNOLOGY CO.,LTD are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Signatory

[Yanjun Zhuang, Sales Manager]

arian zhuany .

ZHANGZHOU LAISHIKE ELECTRONIC TECHNOLOGY CO.,LTD 3#B503 GREEN LAKE PLAZA , No.1 HUBIN ROAD, LONGWEN DISTRICT, ZHANGZHOU, FUJIAN, Date: 2023-02-20 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (7) Filing SUBJECT: FCC Application for FCC ID: 2A9QY-FL125B ZHANGZHOU LAISHIKE ELECTRONIC TECHNOLOGY CO., LTD certifies that, as of the date of the filing of the application, SEETEC US LTD is our designated U.S. agent for service of process for the above referenced FCC ID. ZHANGZHOU LAISHIKE ELECTRONIC TECHNOLOGY CO., LTD accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. SEETEC US LTD accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Name: SEETEC US LTD FRN:0033422072 Address: 15177 STERRA BONITA LN, CHINO Contact Person: Winston Huang Tel.: 1- (840) 200-6105 Email:us@seetec. com. cn Sincerely, CA91710, USA Signed on behalf of ZHANGZHOU LAISHIKE ELECTRONIC TECHNOLOGY CO., LTD jan f A Name: Yanjun Zhuang wn Zhuang Signed on behalf of SEETEC US LTD

"Name: Winston Huang 7

| Title: Sales Manager Title: Director Date: 2023-02-20 Date: 2023-02- 20 Rev 1/26/2023