all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 3.82 MiB | October 18 2021 | |||
1 2 |
|
Internal photo | Internal Photos | 2.47 MiB | October 18 2021 | |||
1 2 |
|
External photo | External Photos | 3.61 MiB | October 18 2021 | |||
1 2 |
|
Label | ID Label/Location Info | 680.77 KiB | October 18 2021 | |||
1 2 |
|
Appendix A for 2.4G WiFi | Test Report | 4.10 MiB | October 18 2021 | |||
1 2 |
|
Applicant Declaration Letter | Cover Letter(s) | 676.80 KiB | October 18 2021 | |||
1 2 |
|
Auth letter | Cover Letter(s) | 514.76 KiB | October 18 2021 | |||
1 2 |
|
Confidentiality FCC | Cover Letter(s) | 423.71 KiB | October 18 2021 | |||
1 2 |
|
MCL | Cover Letter(s) | 814.85 KiB | October 18 2021 | |||
1 2 |
|
MPE | RF Exposure Info | 1.06 MiB | October 18 2021 | |||
1 2 |
|
Setup photo | Test Setup Photos | 1.99 MiB | October 18 2021 | |||
1 2 |
|
Test report | Test Report | 2.39 MiB | October 18 2021 |
1 2 | User Manual | Users Manual | 3.82 MiB | October 18 2021 |
Access Controller User's Manual V1.0.0 I Foreword General This manual introduces the installation and basic operations of the access controller (hereinafter referred to as the "device"). Safety Instructions The following categorized signal words with defined meaning might appear in the manual. Signal Words Meaning DANGER Indicates a high potential hazard which, if not avoided, will result in death or serious injury. WARNING Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury. CAUTION TIPS NOTE Indicates a potential risk which, if not avoided, could result in property damage, data loss, lower performance, or unpredictable result. Provides methods to help you solve a problem or save you time. Provides additional information as the emphasis and supplement to the text. Revision History Version Revision Content Release Time V1.0.0 First release. May 2021 About the Manual The manual is for reference only. If there is inconsistency between the manual and the actual product, the actual product shall prevail. We are not liable for any loss caused by the operations that do not comply with the manual. The manual would be updated according to the latest laws and regulations of related jurisdictions. For detailed information, refer to the paper manual, CD-ROM, QR code or our official website. If there is inconsistency between paper manual and the electronic version, the electronic version shall prevail. All the designs and software are subject to change without prior written notice. The product updates might cause some differences between the actual product and the manual. Please contact the customer service for the latest program and supplementary documentation. There still might be deviation in technical data, functions and operations description, or errors in print. If there is any doubt or dispute, we reserve the right of final explanation. I Upgrade the reader software or try other mainstream reader software if the manual (in PDF format) cannot be opened. All trademarks, registered trademarks and the company names in the manual are the properties of their respective owners. Please visit our website, contact the supplier or customer service if there is any problem occurring when using the device. If there is any uncertainty or controversy, we reserve the right of final explanation. II Important Safeguards and Warnings This section introduces the proper way of using the device, and danger and property damage preventions. Before using the device, read this manual carefully. Follow the instructions and keep this manual properly for future reference. Operating Requirements Do not place the device in a place exposed to sunlight or near the heat source. Keep the device away from dampness, dust, or soot. Keep the device on a stable place to prevent it from falling. Do not drop or splash liquid onto the device, and make sure that there is no object filled with liquid on the device to prevent liquid from flowing into it. Put the device in a well-ventilated place, and do not block the ventilation of it. Use the device within the rated range of power input and output. Do not dissemble the device. Transport, use, and store the device under the allowed humidity and temperature conditions. Electrical Safety Use locally recommended power cord in the limit of rated specifications. Use the standard power adapter. We will assume no responsibility for any problems caused by nonstandard power adapter. Use power supply that meets ES1 but does not exceed PS2 limits defined in IEC 62368-1. For specific power supply requirements, refer to device labels. Connect the Device (I-type structure) to the power socket with protective earthing. The coupler is the disconnecting apparatus. Keep it at the angle for easy operation. III Table of Contents Foreword .................................................................................................................................................... I Important Safeguards and Warnings .................................................................................................... III 1 Product Overview .................................................................................................................................. 1 Introduction ................................................................................................................................... 1 Features ........................................................................................................................................ 1 Dimensions ................................................................................................................................... 2 Application ..................................................................................................................................... 1 2 Device Operation ................................................................................................................................... 2 Configuration Process ................................................................................................................... 2 Keypad Function ........................................................................................................................... 2 Initializing the Device .................................................................................................................... 2 Standby Interface .......................................................................................................................... 3 Logging in to the Main Menu ........................................................................................................ 4 Unlocking Methods ....................................................................................................................... 5 2.6.1 Card .................................................................................................................................... 5 2.6.2 Fingerprint ........................................................................................................................... 5 2.6.3 User Password ................................................................................................................... 5 2.6.4 Administrator Password ...................................................................................................... 5 User Management ........................................................................................................................ 6 2.7.1 Adding a New User ............................................................................................................. 6 2.7.2 User/Admin List .................................................................................................................. 7 2.7.3 Administrator Password ...................................................................................................... 8 Access Control Management ........................................................................................................ 9 2.8.1 Unlocking Mode .................................................................................................................. 9 2.8.2 Lock Holding Time ............................................................................................................ 10 Communication ........................................................................................................................... 10 2.9.1 IP Configuration ................................................................................................................ 10 2.9.2 Wi-Fi ................................................................................................................................... 11 2.9.3 Wiegand ............................................................................................................................ 12 2.9.4 Serial Port ......................................................................................................................... 12 2.9.5 Mode Settings ................................................................................................................... 13 System ...................................................................................................................................... 14 2.10.1 Time ................................................................................................................................ 14 2.10.2 Volume ............................................................................................................................ 14 2.10.3 Restoring to Default Settings .......................................................................................... 15 2.10.4 Restarting the Device ..................................................................................................... 15 USB ........................................................................................................................................... 16 2.11.1 USB Export ..................................................................................................................... 16 2.11.2 USB Import ...................................................................................................................... 16 2.11.3 USB Update .................................................................................................................... 17 2.11.4 Export Records ............................................................................................................... 17 2.11.5 One-click Operation ........................................................................................................ 18 Device Information .................................................................................................................... 18 IV 3 Web Operations ................................................................................................................................... 19 Initialization ................................................................................................................................. 19 Login ............................................................................................................................................ 21 Resetting the Password .............................................................................................................. 21 Door Parameter ........................................................................................................................... 23 Alarm Linkage ............................................................................................................................. 25 3.5.1 Setting Alarm Linkage ....................................................................................................... 25 3.5.2 Alarm Log .......................................................................................................................... 27 Time Section ............................................................................................................................... 27 3.6.1 Configuring Time Section ................................................................................................. 28 3.6.2 Configuring Holiday Group ............................................................................................... 28 3.6.3 Configuring Holiday Plan .................................................................................................. 29 Data Capacity .............................................................................................................................. 30 Volume Setting ............................................................................................................................ 30 Network Setting ........................................................................................................................... 31 3.9.1 TCP/IP .............................................................................................................................. 31 3.9.2 Port ................................................................................................................................... 32 3.9.3 Register ............................................................................................................................. 33 3.9.4 P2P ................................................................................................................................... 33 Date Setting .............................................................................................................................. 34 Safety Management .................................................................................................................. 35 3.11.1 IP Authority ...................................................................................................................... 35 3.11.2 Systems .......................................................................................................................... 38 User Management .................................................................................................................... 42 3.12.1 User ................................................................................................................................ 42 3.12.2 ONVIF User .................................................................................................................... 44 Maintenance .............................................................................................................................. 46 Configuration Management ...................................................................................................... 46 3.14.1 Exporting Configuration File ........................................................................................... 46 3.14.2 Importing Configuration File ........................................................................................... 47 3.14.3 Default ............................................................................................................................. 47 Upgrade .................................................................................................................................... 47 Version Information ................................................................................................................... 48 Online User ............................................................................................................................... 48 System Log ............................................................................................................................... 49 3.18.1 System Logs ................................................................................................................... 49 3.18.2 Admin Log ....................................................................................................................... 50 3.18.3 Unlock Records .............................................................................................................. 50 Exit ............................................................................................................................................ 50 4 SmartPSS AC Configuration .............................................................................................................. 51 Login ............................................................................................................................................ 51 Adding Devices ........................................................................................................................... 51 4.2.1 One by One ...................................................................................................................... 51 4.2.2 In Batches ......................................................................................................................... 53 User Management ...................................................................................................................... 54 4.3.1 Setting Card Type ............................................................................................................. 54 4.3.2 Adding User ...................................................................................................................... 55 V Assigning Permissions ................................................................................................................ 58 Fingerprint Registration Instructions .............................................................................. 60 Cybersecurity Recommendations ................................................................................... 63 VI 1 Product Overview Introduction Fitted with a powerful processor and a deep-learning algorithm, the device can identify fingerprints instantly and accurately. Besides fingerprint, the device also supports unlocking the door by a card or password. It can work with a management software to more functions for various needs. Only certain models support the fingerprint function. Features LCD display. PC + ABS/acrylic panel that is suitable for outdoor use. Adapts to different situations with the ability to switch between card reader and controller modes; as a card reader, the device can work with multiple types of controllers and protect your data. Supports unlocking the door remotely on SmartPSS AC, or by cards, passwords, fingerprints, or their combinations. Supports multiple alarm types, such as duress, intrusion and tamper. Supports various types of users, including guest, patrol, blocklist, VIP, normal users, and other users. You can log in to the web interface with a PC or smartphone. Supports door bell. Works with SmartPSS AC and ICC. 1 Dimensions Dimensions (1) (mm[inch]) Dimensions (2) (mm[inch]) 2 Application The device is applicable to office buildings, schools, industrial zones, apartment complexes, factories, public stadiums, business centers, and more. To introduce the network diagram, this section uses a device with the fingerprint function working as a controller. Network diagram 1 2 Device Operation Configuration Process The device can be used for access control purpose after you finish the following process. Configuration process Keypad Function Item Description Table 2-1 Function description Number or letter Esc OK Used to enter information or password. Navigate the interface. Navigate the interface. Cancel an operation or go back to the previous interface. Go to the selected interface or confirm your change. Go to the administrator login interface. Backspace or navigate the interface. Ring the bell (only on the standby interface), navigate the interface, or change the input method. Initializing the Device For first-time use or after resetting the device to default settings, you need to set a password and email address for the admin account, and the time zone of the device for first-time use. Use the admin account to log in to the main menu of the device, make configurations on the device, log in to the web interface or for adding it to SmartPSS AC. 2 Initialize the device The administrator password can be reset through the e-mail address you entered if you forget it. The password should consist of 8 to 32 non-blank characters and contain at least two types of characters among upper case, lower case, number, and special characters (excluding '
" ; : &, space and non-printing characters). Enter the password again to confirm the password. Set a password of high security level according to the password strength prompt. Standby Interface You can directly unlock the door on the standby interface with your card, password, or fingerprint. See the following table for other information of the standby interface. The device will go back to the standby interface if there are no operations done in 30 seconds. The device will turn off the screen if it stays on the standby interface for 30 seconds. The following interface is for reference only. Standby interface 3 Table 2-2 Standby interface description No. Item Description 1 2 3 4 Status Displays the status of Wi-Fi, wired network (if any), and USB flash drive. Date & Time Time and date. Unlock the door with password Unlocking methods Enter the user ID and password, or the administrator password (see
"2.6.4 Administrator Password" for details) to unlock the door. Displays the unlocking methods you configured. 5 Main menu administrator and admin users can log in to the main menu of the device. Tap the icon, and then you can enter the main menu. Only the See "2.5 Logging in to the Main Menu". Logging in to the Main Menu Log in to the main menu to configure parameters of the device. You can add users of different levels, change the unlocking mode, and more. Only the administrator and admin users can log in to the main menu. See Table 2-2 for details. On the standby interface, tap
. Verification methods varies with the type of device. Select a login method. Log in as an admin user using a card, fingerprint, or password. Log in as the administrator: Tap admin, and then enter the password you set during initialization. Log in as an administrator 4 Unlocking Methods 2.6.1 Card Swipe your card on the card-reading area to unlock the door. 2.6.2 Fingerprint Press your registered fingerprint on the fingerprint scanner to unlock the door. 2.6.3 User Password Enter the user ID and password of a user to unlock the door. Select on the standby interface. Select PWD, and then tap OK. Enter the user ID and password of a user. To enter the user ID, you need to select the input box of user ID and tap OK. You can directly enter the password on the keypad. Tap to change the input method. Select OK, and then tap OK. The system will prompt that the door is unlocked. 2.6.4 Administrator Password If you enable and set up the administrator password, you can use it to unlock the door. Except when the device is set to the normally open or closed status, you will not be restricted by user ID, unlocking methods, time section, holiday plan, and anti-passback. The device can only support one administrator password. To use the administrator password, you need to enable the function and set it up. See "2.7.3 Administrator Password". Select on the standby interface. Select Admin PWD, and then tap OK. Enter the administrator password. Select OK, and then tap OK. The door is unlocked. 5 User Management You can add new users, view the user list, admin list, and modify the super password on the User interface. 2.7.1 Adding a New User Select Log in as the administrator, and then select User Management > New User. on the standby interface, and then tap OK. This section uses a device with the fingerprint function. Differences on the interfaces might be found on the actual interfaces. Add a new user Configure the parameters. Paramete r No. Name Fingerprin t Table 2-3 Parameter description Description Each user ID is unique. It can be 18 characters of numbers, letters, or the their combination. For example employee ID number. You can enter names with at least 10 Chinese characters or 32 characters
(including numbers, symbols, and letters). Each user can add up to 3 fingerprints. Follow the on-screen instructions and voice prompt to add a fingerprint. You can enable the Duress FP function under each fingerprint. After the duress alarm function is enabled, you can trigger an alarm by using the duress fingerprint to unlock the door. See the user's manual for details. We do not recommend setting the first fingerprint as the duress fingerprint. Only certain models support the fingerprint function. You can register five cards for each user. On the card registration interface, swipe your card, and then the card information will be read by the device. Card You can enable the duress card function on the card registration interface. After the duress alarm function is enabled, you can trigger an alarm by using the duress card to unlock the door. PWD The door unlocking password. The maximum length of the ID digits is 8. 6 Paramete r Description You can select a user level for the new user. There are two options:
User level User: Users only have door unlock authority. Administrators can configure parameters of the device and unlock the door. A user can only unlock the door within the defined period. For how to set up a Period period, see the user's manual. The default value is 255, meaning the user can unlock the door at any time. Holiday Plan A user can only unlock the door within the defined period. For how to set up a holiday plan, see the user's manual. The default value is 255, meaning the user can unlock the door at any time. Valid Date You can set a period during which the unlocking information of the user is valid. General: General users can unlock the door normally. Blacklist: When users in the blacklist unlock the door, service personnel will get a prompt. Guest: Guests are allowed to unlock the door within a defined period or for certain amount of times. After the defined period or they run out of unlocking times, they cannot unlock the door. Patrol: Paroling users can have their attendance tracked, but they have no User level unlocking permissions. VIP: When VIP unlock the door, service personnel will get a prompt. Others: When they unlock the door, the door will stay unlocked for 5 more seconds. Custom User 1/2: Same as General. After you have configured all the parameters, tap Esc. The system prompts ask you to save the settings or not. Tap OK to save the settings. 2.7.2 User/Admin List You can view and search for all the normal users and admin users, and edit their information. On the main menu, select User > User List/Admin List. User list 7 Admin list Unlocking method If any of the following icons is displayed, it means that the user has set up the corresponding unlocking method.
: Fingerprint.
: Card.
: Password. Editing User Information Select the user you want to edit, and then tap OK. Edit the information as needed. Tap Esc. The system will ask you to save the settings or not. Tap OK. Searching for User Select
, and then enter the user ID, swipe a card, or press a finger print to search for the user you want. Deleting User Select the user you want, tap OK, and then select to delete the user. 2.7.3 Administrator Password The device can only set up one administrator password. You can use it to unlock the door without having to enter a user ID. On the main menu, select User > Administrator PWD. 8 Enter the administrator password, and then tap OK. Administrator password Select Enable, and then tap OK to enable the function. Access Control Management Configure the unlocking mode and how long the lock will be unlocked each time. On the main menu, select Access. Access control management 2.8.1 Unlocking Mode Configure the unlocking combination as needed. The unlocking methods vary with the type of device. Use card, fingerprint, password, or any of their combinations to unlock the door. On the main menu, select Access > Unlock Mode, and then tap OK. The unlocking methods vary with the type of device. Tap OK to configure the combination of unlocking methods. And: For example, you need to verify both your card and fingerprint to unlock the door. 9 Or: For example, you only need to verify your card or fingerprint to unlock the door. Element (Multiple Choice) Tap Esc. The system will ask you to save the settings or not. Tap OK. 2.8.2 Lock Holding Time The door will be unlocked during the defined duration, and will be locked after the duration. On the main menu, select Access > Lock Holding. Tap OK, and then enter the value you need. Tap to change the input method. Communication Configure the network, serial port and Wiegand port parameters to properly connect the device to the network or other devices. 2.9.1 IP Configuration Set up an IP address for the device to connect it to the network. Then you can log in to the web interface of the device to make configurations, and add it to SmartPSS AC. On the main menu, select Comm > IP Address. Select and tap OK to configure parameters. 10 Set up network parameters Parameter Description Table 2-4 Parameter description IP address, subnet mask and gateway The IP address, subnet mask, and gateway IP address should be on the same network segment. After configuration, tap to save the configurations. It stands for Dynamic Host Configuration Protocol. DHCP When it is enabled, the device will automatically obtain an IP address. IP P2P address, subnet mask, and gateway cannot be configured. When it is enabled, you can directly manage the device without a dynamic domain, relay server, or port mapping. 2.9.2 Wi-Fi Connect the device to a wireless network. Only certain models support Wi-Fi. On the main menu, select Comm > Wi-Fi, and then tap OK. Wi-Fi Select Wifi Search, and then tap OK. Select WiFi, and then tap OK to enable the wifi function. 11 The device will search for and display available wireless networks. Tap or to go to the previous or next page. Select a wireless network, tap OK, and enter the password. The device will go back to the previous interface, and the information of the wireless network you connected to is displayed. 2.9.3 Wiegand Select Wiegand input or output as needed. On the main menu, select Comm > Wiegand, and then tap OK. Select Wiegand Input when you need to connect a card reader to the device. Select Wiegand Output when the device works as a card reader, and you need to connect it to another access controller. Wiegand Table 2-5 Wiegand parameters description Parameter Description Determines whether the device can reads a card number or the digits of a card number. Wiegand output type Wiegand26: Reads three bytes or six digits. Pulse Width Pulse Interval Output Data Type Wiegand34: Reads four bytes or eight digits. Wiegand66: Reads eight bytes or sixteen digits. Enter the value as needed. UserID: Outputs the ID of the user who swipes a card. Card No.: Outputs the card number that is used. 2.9.4 Serial Port Select a type as needed. 12 On the main menu, select Comm > Serial Port, and then tap OK. Serial port settings Select Serial Input when the device connects to a card reader. The card reader will send the card number to the device or SmartPSS AC. Select Serial Output when the device works as a card reader. The device will the card number to the controller, which will determine whether to unlock the door. UserID: Outputs the ID of the user who swipes a card. Card No.: Outputs the card number that is used. Select OSDP Input when the device connects to a card reader through OSDP protocol. The card reader will send the card number to the device or SmartPSS AC. 2.9.5 Mode Settings Set the device to work as a controller or card reader. On the main menu, select Comm > Mode Setting. Serial port settings Mode Controller: The device works as an access standalone. You can use different unlocking methods to unlock the door. You can also connect it to a card reader, and then the card reader can send the information to the device or SmartPSS AC. Card Reader: The device works as a card reader, and it can be connected to a controller or another access standalone. 13 If set to card reader, you cannot configure the serial port. Baud rate setting Tap OK to select 9600 or 115200. Select the one suitable for the controller or card reader you need to connect the device to. The device can only communicate with another device when their baud rates are the same. System 2.10.1 Time Configure time-related parameters, such as date, time, and date format. On the main menu, select System > Time, and then tap OK. Select a parameter, and then tap OK. Time settings Table 2-6 Parameter description Parameter Description 24-hour System Enable 24-hour format as needed. Date Setting Set up the date. Time Date Format Time Zone Set up the time. Select a date format as needed. Select a time zone as needed. 2.10.2 Volume Adjust the volume of the voice prompt as needed. On the main menu, select System > Volume, and then tap OK. Tap the up or down arrows to adjust the volume. 14 Adjust the volume 2.10.3 Restoring to Default Settings Data will be lost if you restore the device to default settings. Select whether you want to keep the user information and logs after restore the device to default settings. On the main menu, select System > Restore Factory, and then tap OK. Select an option, and then tap OK. Default: All configurations will be restored to default settings, and all data will be lost, including users, device information, and logs. Default (Save user&log): All configurations will be restored to default settings, and all data will be lost, except users and logs. Restoring to Default Settings 2.10.4 Restarting the Device On the main menu, select System > Reboot, and then tap OK to restart the device. 15 USB Make sure that a USB flash drive is inserted to the device before exporting user information or updating. Do not pull out the USB flash drive or perform any operation of the device during the process. Otherwise, it will fail. Export information from another device to a USB flash drive, and then import it to this device. You can use a USB flash drive to update the device, or export or import user information, 2.11.1 USB Export You can export data from the device to a USB flash drive. The exported data is encrypted and cannot be edited. On the main menu, select USB > USB Export, and then tap OK. Select the type of data you want to export, and then tap OK. Export data to the USB flash drive Tap OK. The selected data is exported to the USB flash drive. 2.11.2 USB Import Export the data from one device, and then import it to another device. On the main menu, select USB > USB Import, and then tap OK. Select the type of data you want to import, and then tap OK. 16 Import data from the USB flash drive Tap OK. The selected data is imported to the device. 2.11.3 USB Update You can use a USB flash drive to update the device. Rename the update file to "update.bin", put it in the root directory of the USB flash drive, and then insert the USB flash drive to the device. On the main menu, select USB > USB Update, and then tap OK.
"Confirm to Update" is displayed. Tap Esc to cancel the update. Tap OK. The device will restart when update is completed. 2.11.4 Export Records You can export unlocking records to a USB flash drive. On the main menu, select USB > Export Records, and then tap OK. Set up a time frame. Export unlocking records 17 Select USB Export, and then tap OK. The unlocking records are exported to the USB flash drive. 2.11.5 One-click Operation You can use one-click operation to import or export user information, including cards and fingerprints. One-tap, select USB > One-click Operation, and then tap OK. Import: Import user information, including cards and fingerprints. Export: Export user information, including cards and fingerprints. Tap OK. One-click operation Device Information On the main menu, select Info, and then tap OK. You can view data capacity and system information of the device. Data Capacity: Displays the number of normal users, admin users, cards, fingerprints, unlocking records, and alarm records that have been stored, and their respective capacity. Device Version: Displays software and hardware information of the device. 18 3 Web Operations On the web interface of the device, you can configure its parameters, restart it regularly, and update its software. When the device is in the same network as your smartphone, you can also log in to the web interface of the device on your smartphone. Only certain parameters can be configured on the web interface if you log in to it using your smartphone. Initialization You need to set a password and an email address before logging in to the web for the first time. Go to the IP address (192.168.1.108 by default) of the device in the browser. Use browser newer than IE 8, otherwise you might not log in to the web. Make sure that the computer used to log in to the web is in the same LAN with the device. Initialization Enter the new password, confirm password, enable Bind Email, enter an email address, and then click Next. The password must consist of 8 to 32 non-blank characters and contain at least two types of characters among upper case, lower case, number, and special character (excluding ' " ; : &). Set a password of high security level according to the password strength prompt. For security, keep the password properly after initialization and change the password regularly. 19 When you need to reset the administrator password by scanning the QR code, you need the linked email address to receive the security code. Click Next. Auto check You can decide whether to select Auto Check or not. It is recommended that Auto Check be selected to get the latest program in time. Click Next. Finished configuration Click Complete, and the initialization is completed. 20 Login Open IE web browser, enter the IP address of the device in the address bar, and press Enter. Use browser newer than IE 8, otherwise you might not log in to the web. Make sure that the computer used to log in to the web is in the same LAN with the device. The default IP address is 192.168.1.108. Login Enter the user name and password. The default administrator name is admin, and the password is the one you set during initialization. Change the administrator password regularly and keep it well. If you forget the administrator login password, you can click Forget Password? to reset it. See "3.3 Resetting the Password". Click Login. Resetting the Password When resetting the password of the admin account, your email address will be needed. Click Forgot password? on the login interface. 21 Tips Read the tips. Click OK. Reset Password Scan the QR code on the interface, and you will get the security code. At most two security codes will be generated by scanning the same QR code. If security codes become invalid, to get more security codes, refresh the QR code. You need to send the content you get after you scanned the QR code to the designated email address, and then you will get the security code. 22 Please use the security code within 24 hours after you receive it. Otherwise, it will become invalid. If wrong security codes are entered for consecutive five times, the administrator will be frozen for five minutes. Enter the security code you have received. Click Next. Reset and confirm the new password. The password should consist of 8 to 32 non-blank characters and contain at least two types of characters among upper case, lower case, number, and special character
(excluding ' " ; : &). Click OK, and the reset is completed. Door Parameter Configure the access control parameters. Log in to the web interface. Select Door Parameter. Door parameters Configure Opening Method. Time section 1) Click
. Time section parameter 23 2) Configure the time and opening method for a time section. You can configure up to four time sections for each day.
(Optional) Select Apply to the whole week to copy the configuration to other days. 3) 4) Click OK Multi-person 1) Click
, and then click Add. Multi-person parameter 2) Select an opening method, and enter a number for valid user. 3) In the User List section, enter the ID of the users as needed. For user ID, see "2.7.1 Adding a New User". VIP, patrol, and blocklist users cannot be added. All the users in different groups must all verify their identities in the group order to unlock the door. Unlock mode 1) Select the unlock method(s) in Element (Multiple Choice). Unlock mode parameters 2) Select Or or And. Or means you must use all the defined methods to open the door;
And means you can open the door with any of the defined methods. 3) Select the unlock methods for Element (Multiple Choice). Configure other parameters. 24 Parameter Description Table 3-1 Parameter description Name State Enter a name for the door that this device controls. Select NC for normally closed, or NO for normally open. If either is selected, the defined opening method will not be effective. Opening Method See Step 3 above. Hold Time Unlock duration. If expired, the door will be locked. It ranges from 0.2 to 600
(Sec.) seconds. Normally Open Time Normally Close Time Timeout (Sec.) The door will be always open or closed. A timeout alarm will be triggered if the door stays unlock for longer than this value. An alarm will be triggered when a duress card or duress password is used to Duress Alarm unlock the door. Door Sensor Intrusion Alarm Overtime Alarm Anti-passback Alarm Click OK. Intrusion and overtime alarms can be triggered only after Door Sensor is enabled. When Door Sensor is enabled, an intrusion alarm will be triggered if the door is opened abnormally. A timeout alarm will be triggered if the time that a user takes to unlock the door exceeds the Timeout(s), which ranges from 1 to 9999 seconds. If enabled, users need to verify identities both for entry and exit; otherwise an alarm will be triggered. If a person enters with the identity checked and exits without the identity checked, an alarm will be triggered when the person tries to enter again and the person will have no permission to unlock the door any more. If a person enters without the identity checked, an alarm will be triggered when the person tries to exit with the identity checked, and the person will have no permission to unlock the door any more. Alarm Linkage 3.5.1 Setting Alarm Linkage Alarm input devices can be connected to the device, and you can modify the alarm linkage parameter as needed. Log in to the web interface. Select Alarm Linkage > Alarm Linkage. 25 Alarm linkage Click to modify the alarm linkage parameters. Change alarm linkage parameters Table 3-2 Alarm linkage parameter description Parameter Alarm Input Name Description You cannot modify the value. Keep it default. Enter a zone name. Alarm Input Type Select the type according to the alarm input type of the alarm device you have purchased. NO: The circuit of the alarm device is normally open, and it closes when an alarm is triggered. NC: The circuit of the alarm device is normally closed, and it opens when an alarm is triggered. If enabled, the device will output fire alarms when triggered. The alarm details will be displayed in the alarm log. Fire Link Enable Alarm output and access link are NO by default if fire link is enabled. AlarmOutput Enable After enabling alarm output, the relay can output alarm infromation. Duration (Sec.) Alarm duration. It ranges from 1 s through 300 s. AlarmOutput Channel Access Link Enable The device has only one output channel. Select the one according to your alarm device. If enabled, the device will be normally on or normally closed when there are input alarm signals. 26 Parameter Channel Type Description There are two options: NO and NC. Click OK, and then the configuration is completed. The configuration on the web will be synchronized with the configuration in the client if the device is added to a client. 3.5.2 Alarm Log You can view the alarm type and time range in the Alarm Log interface. Log in to the web interface. Select Alarm Linkage > Alarm Log. Alarm log Select a time range and alarm type, and then click Query. Query results Time Section Configure time sections and holiday plans, and then you can define when a user has the permissions to unlock doors. 27 3.6.1 Configuring Time Section You can configure 128 time sections (0127), and 4 time sections at most for each day. A user can only unlock doors in the configured time sections. Log in to the web interface. Select Time Section > Time Section. Click Add. Time section parameters Enter a number and name for the time section. No.: Enter a section number. It ranges from 0 through 127. Time Section Name: Enter a name for each time section. You can enter 10 Chinese characters or 32 characters (contain number, special characters and English characters. Configure periods for each day. You can configure up to four periods.
(Optional) Click Apply to the whole week to copy the configuration to other days. Click OK. 3.6.2 Configuring Holiday Group Divide holidays into groups, and set holiday plans for different holiday groups. You can configure 128 holiday groups (0127). Each group supports 16 holidays. Configure start and end time for a holiday group, and users can unlock doors in the configured period. Log in to the web interface. Select Time Section > Holiday Group Config. Click Add. 28 Add a holiday group Enter a number and a name for the holiday group. No.: Enter a section number. It ranges from 0 through 127. Time Section Name: Enter a name for each time section. You can enter 10 Chinese characters or 32 characters (contain numbers, special characters and English characters). Click Add. Add a holiday Enter a name for the holiday, select the start and end date, and then click OK. You can add multiple holidays for one holiday group. Click OK. 3.6.3 Configuring Holiday Plan Add the configured holiday groups to a holiday plan for management. Users can only unlock the doors within the days defined in the holiday plan. Log in to the web interface. 29 Select Time Section > Holiday Plan Config. Click Add. Add a holiday plan Enter a number and name for the holiday plan. No.: Enter a section number. It ranges from 0 through 127. Time Section Name: Enter a name for each time section. You can enter 10 Chinese characters or 32 characters (contain numbers, special characters and English characters). Select the number of a holiday group that you have configured. Select 255 if you do not want to select a holiday group. Configure periods for each day in the holiday group that you selected. You can configure up to four periods. Click OK. Data Capacity You can see data capacity such as users, cards, and fingerprints that the device can hold on the Data Capacity interface. Log in to the web interface. Select Data Capacity on the navigation bar. Volume Setting You can adjust the volume as needed. Log in to the web interface. Click Volume Setting, and adjust the volume as needed. 30 Volume setting Click OK. Network Setting 3.9.1 TCP/IP You need to configure IP address and DNS server so that the device can communicate with other devices. Prerequisite Make sure that the device is connected to the network and you can log in to its web interface. Log in to the web interface. Select Network Setting > TCP/IP. TCP/IP Configure parameters. 31 Table 3-3 TCP/IP Parameter IP Version Description IPv4. MAC Address MAC address of the device. Static: Set IP address, subnet mask, and gateway address manually. DHCP After DHCP is enabled, IP address, subnet mask, and gateway address cannot be configured. If DHCP is effective, IP address, subnet mask, and gateway address will be displayed automatically. If you want to see the default IP when DHCP is effective, you need to disable DHCP. Only available when IPv6 is selected in the IP version. Unique link-local addresses will be assigned to network interface controller in each local area network to enable communications. The link-local address cannot be modified. Enter IP address, and then configure subnet mask and gateway address. IP address and gateway address must be in the same network segment. Set IP address of the preferred DNS server. Mode Link-local address IP Address Subnet Mask Default Gateway Preferred/
Alternate DNS Server Click OK to complete the setting. 3.9.2 Port Set the maximum connections clients that the device can be connected to and port numbers. Log in to the web interface. Select Network Setting > Port. Configure port numbers. See the following table. Except max connection, you need to restart the device to make the configuration effective after modifying values. Parameter Description Table 3-4 Port description You can set the maximum connections of clients that the device can be Max Connection connected to. Platform clients like SmartPSS AC are not counted. TCP Port Default value is 37777. HTTP Port Default value is 80. If other value is used as port number, you need to add this value behind the address when logging in through browsers. HTTPS Port Default value is 443. 32 Parameter Description RTSP Port Default value is 554. Click OK to complete the setting. 3.9.3 Register When connected to external network, the device will report its address to the server that is designated by the user so that clients can get access to the device. Log in to the web interface. Select Network Setting > Auto Register. Select Enable, and enter host IP, port, and sub device ID. Table 3-5 Auto register description Parameter Description Host IP Port Server IP address or server domain name. Server port used for auto registeration. Sub Device ID Access controller ID assigned by the server. Click OK to complete the setting. 3.9.4 P2P Peer-to-peer computing or networking is a distributed application architecture that partitions tasks or workloads between peers. Users can download mobile application by scanning QR code, and then register an account so that more than one access controller can be managed on the mobile app. You do not need to apply dynamic domain name, do port mapping or do not need transit server. If you want to use P2P, you must connect the device to the Internet; otherwise this function cannot work properly. P2P 33 Log in to the web interface. Select Network Setting > P2P. Select Enable to enable the P2P function. Click OK. Scan the QR code on your web interface to get the serial number of the device. Date Setting You can configure time zone, system time, DST (Daylight Saving Time) or NTP server. Log in to the web interface. Click Date Setting. Date setting Parameter Time Zone System Time DST Table 3-6 Data setting description Description Configure the time zone as needed. Configure system time. Click Sync with PC, and the system time changes to the PC time. 1. Enable DST as needed. 2. Select Date or Week in Sate Setting. 3. Configure start time and end time. 34 Parameter Description 1. Select the NTP Setting check box. 2. Configure parameters. Server: Enter the domain of a NTP server, and the device syncs time with the server in real time. Port: Enter the prot of the NTP server. Update Cycle: The interval of to use NTP. NTP Setting Click OK. Safety Management 3.11.1 IP Authority Log in to the web interface. Click Safety Mgmt. > IP Authority. IP authority Select a cybersecurity mode as needed. Network Access: Set allowlist and blocklist to limit access. Allowlist: Only when the IP/MAC of your PC in the allowlist, can you access the device. Ports are the same. Blocklist: When the IP/MAC of your PC is in the blocklist, you cannot access the device. Ports are the same. Prohibit PING: Enable PING prohibited function, and the device will not respond to the ping request. Anti Half Connection: Enable Anti Half Connection function, and the device can provide service normally under half connection attack. 3.11.1.2 Network Access Select Network Access in Type. Procedure Select the Enable check box. 35 Network access Select Allow List or Block List. Click Add. Add IP Configure parameters. 36 Table 3-7 Description of adding IP parameters Parameter Description Type Select IP address, IP segment, MAC address or all IP addresses. IP address: Select IP version and enter the IP address of the host to be added. IP segment: Select IP version and enter the start address and end address of the segment to be added. MAC address: Enter MAC address of the host to be added. All IP addresses: Set all IP addresses in allowlist or restricted list. Al Ports Set access ports. You can select all ports or the ports in defined areas. Device Start Server Port Device End Server Port Device all ports: Set all IP port in allowlist or blocklist. When selecting Blocklist in Mode, and All IP Address in Rule Type, you cannot select the Device All Ports check box. Device start server port and Device end server port: Set Device start server port and device end server port, and the range is 165535. Click Save, and the IP Authority interface is displayed. Click OK. Other Operations Click to edit the allowlist or blocklist. Click to delete the allowlist or blocklist 3.11.1.3 Prohibit PING Set Type to Prohibit PING. Select the Enable check box. Prohibit PING Click OK. 3.11.1.4 Anti Half Connection Set Type to Anti Half Connection. 37 Select the Enable check box. Network access Click OK. 3.11.2 Systems 3.11.2.1 System Service Log in to the web interface. Select Safety Mgmt. > System Service. Enable or disable the system services as needed. The system service configuration on the web interface is synchronized to the Features interface of the device. System service 38 Parameter Description Table 3-8 Parameter description SSH PWD Reset Enable Secure Shell (SSH) is a cryptographic network protocol for operating network services securely over an unsecured network. When SSH is enabled, SSH provides cryptographic service for the data transmission. If enabled, you can reset the password. This function is enabled by default. Common Gateway Interface (CGI) offers a standard protocol for web servers to execute programs similarly to console applications running on a server CGI that dynamically generates web pages. When CGI is enabled, CGI commands can be used. The CGI is enabled by default. ONVIF Enable other devices to pull video stream of the VTO through the ONVIF protocol. Hypertext Transfer Protocol Secure (HTTPS) is a protocol for secure communication over a computer network. When HTTPS is enabled, HTTPS will be used to access CGI commands;
HTTPS otherwise HTTP will be used. When HTTPS is enabled, the device will restart automatically. Compatible with TLSv1.1 and Enable this function if your browser is using TLS V1.1 or earlier versions. earlier versions Emergency Maintenance Enable it for fault analysis and repair. This function will occupy 8088 and 8087 ports. Security Mode (recommended): Support logging in with Digest Auth Method authentication. Compatible Mode: Use the old login method. 3.11.2.2 Creating Server Certificate Click Create Server Certificate, enter needed information, click Save, and then the device will restart. 3.11.2.3 Downloading Root Certificate Click Download Root Certificate. Double-click the file that you have downloaded. 39 Figure 4-115 File download Click Open. Figure 4-116 Certificate information Click Install Certificate. 40 Figure 4-117 Certificate import wizard (1) Select Current User or Local Machine, and then click Next. Current User: Applies to the user that has logged in to the PC. Local Machine: Applies to all users that have logged in to the PC Figure 4-118 Certificate store Step 10 Select the storage location, and then click Next. 41 Figure 4-119 Certificate import wizard (2) Step 11 Click Finish. Figure 4-120 Imported successfully User Management You can add and delete users that can log in to the web interface, modify users passwords, and enter an email address for resetting the password when you forget your password. User refers to the use who logging in to the web interface. 3.12.1 User 3.12.1.1 Adding Users Log in to the web interface. Select User Mgmt. > User Mgmt. 42 User management Click Add. Add user Enter username, password, confirm password, and remark. Click OK. 3.12.1.2 Changing Password Log in to the web interface. Select User Mgmt. > User Mgmt. to change the password. Click 43 Modify user information Select the Bind Email check box and then enter the linked email address. Select the Modify Password check box, and then enter the old password, new password and confirm password. Click OK. 3.12.2 ONVIF User Open Network Video Interface Forum (ONVIF), a global and open industry forum with the goal of facilitating the development and use of a global open standard for the interface of physical IP-
based security products. When ONVIF is used, administrator, operator, and user have different permission of ONVIF server. Create ONVIF users as needed. 3.12.2.1 Adding ONVIF User Log in to the web interface. Select User Mgmt. > Onvif User. 44 Onvif user Click Add. Add ONVIF user Enter username, password, and confirm password. Select the group. Click OK. 3.12.2.2 Changing Password Log in to the web interface. Select User Mgmt. > Onvif User. to change the password. Click Change the password (ONVIF user) 45 Select the Modify Password check box, and then enter the old password, new password and confirm password. Click OK. Maintenance You can regularly restart the device to improve the device performance. Log in to the web interface. Select Maintenance. Maintenance Set the time, and then click OK. It is Never by default.
(Optional) Click Reboot Device, the device will restart immediately. Configuration Management When more than one device needs the same configuration, you can configure parameters for them by importing or exporting configuration files. 3.14.1 Exporting Configuration File You can export the configuration file of the device for backup. Log in to the web interface. Select Config Mgmt. on the navigation bar. Configuration management Click Export configuration to save the configuration file locally. IP information of the device will not be exported. 46 3.14.2 Importing Configuration File You can import the configuration file that is exported from an access controller to another access controller with the same model. Log in to the web interface. Select Config Mgmt. on the navigation bar. On the configuration management interface, click Browse to select the configuration file that you want to import, and then click Import configuration. The device will restart after importing configuration file. 3.14.3 Default Be careful when doing this operation. It will restore the device to default configuration, and result in data loss. Restore Factory: Reset all the data and configuration of the device. Restore Factory (Save user & log): Reset all data and configuration, except for user information and logs. Log in to the web interface. Select Config Mgmt. >Default. Default Upgrade Export the configuration file for backup before upgrade, and then import it after the upgrade is completed. Make sure that the upgrade file has been obtained. You can get it from technical support. Do not disconnect the power or network, or restart or shutdown the device during upgrade. Log in to the web interface. Select Upgrade on the navigation bar. 47 Upgrade Select upgrading method according to the actual needs. File Upgrade 1) Click Browse, and then upload upgrade file. 2) The upgrade file should be a .bin file. 3) Click Upgrade. The upgrade starts. Online Upgrade 1) Select the Auto-check check box, and then click OK. The system checks for upgrade once a day automatically, and there will be system notice if any upgrade is available. We need to collect the data such as device name, firmware version, and device serial number to proceed auto-check. The collected information is only used for verifying the legality of cameras and upgrade notice. If there is any upgrade available, click Upgrade, and then the system starts upgrading. 2) Click Manual Check to check for upgrade manually. Version Information You can view information including MAC address, serial number, MCU version, web version, security baseline version, system version, and firmware version. Log in to the web interface. Select Version Info on the navigation bar. Online User You can view username, IP address, and user login time on the Online User interface. Log in to the web interface. 48 Select Online User on the navigation bar. Online user System Log View and back up system logs, admin logs, and unlock records. 3.18.1 System Logs View and search for system logs. Log in to the web interface. Select System Log > System Log. Select a time range and a type, and then click Query. Click Backup to download the results. Seach for logs 49 3.18.2 Admin Log Search for admin logs by admin ID. Log in to the web interface. Select System Log > Admin Log. Enter the admin ID, and then click Query. Admin log 3.18.3 Unlock Records Search for unlock records and export them. Log in to the web interface. Select System Log > Search Records. Select a time range and a type, and then click Query. Click Export Data to download the results. Exit Click at the upper-left corner, and then click OK to log out of the web interface. 50 4 SmartPSS AC Configuration You can remotely manage the device through SmartPSS AC. This chapter mainly introduces quick configuration. For detailed operations, see the user's manual of SmartPSS AC. The interfaces of Smart PSS AC are for reference only, and might differ from the actual ones. Login Install SmartPSS AC. Double-click
, and then follow the instructions to finish the initialization and log in. Adding Devices You need to add the device to SmartPSS AC. You can click Auto Search to add devices in batches or Add to add devices one by one. 4.2.1 One by One You can add devices one by one. You need to know IP addresses and login username and password of devices that you want to add. Log in to SmartPSS AC. Click Device Manager on the lower-left corner. Click Add on the Device Manager interface. 51 Manual add Enter detailed information of the device. Parameter Description Table 4-1 Parameters Device Name Enter a name of the device. We recommend naming the device with installation area for easy identification. Method to add Select IP to add the device through IP address. IP Port User Name, Password Enter IP address of the device. It is 192.168.1.108 by default. Enter the port number of the device. The port number is 37777 by default. Enter the username and password of the added device. The username is admin and password is admin123 by default. We recommend changing the password after login. Click Add, and then you can see the added device on the Devices interface. After adding, SmartPSS AC logs in to the device automatically. In case of successful login, status displays Online. Otherwise, it displays Offline. 52 4.2.2 In Batches We recommend adding devices by auto search when you need to add devices in batches within the same network segment, or when the network segment is clear but the device IP address is unclear. Log in to SmartPSS AC. Click Device Manager on the lower-left corner. Devices Click Auto Search. Auto search Enter the network segment, and then click Search. A search result list will be displayed. Click Search to refresh the device list. Select a device, and then click Modify IP to modify its IP address, subnet mask, and gateway. Select devices that you want to add to the SmartPSS AC, and then click Add. Enter the username and the login password to login. You can see the added devices on the Devices interface. The username is admin and password is admin123 by default. We recommend changing the password after login. 53 After adding, SmartPSS AC logs in to the device automatically. If succeeded, the status of the device will be Online. Otherwise, it is Offline. Other Operation
: Edit the information of the device, including device name, IP address, port number, username, and password. You can also double-click the device to edit its information.
: Goes to the device configuration interface. You can set up the time, update the device, restart the device, and extract user information or attendance records from the device. and
: Log in to and out of the device.
: Delete the device. User Management Add users, issue cards to them, and configure their access permissions. 4.3.1 Setting Card Type Before issuing card, set card type first. For example, if the issued card is ID card, set type to ID card. Card types must be the same as card issuer types; otherwise, card numbers cannot be read. Log in to SmartPSS AC. Click Personnel Manager. Personnel manager On the Personnel Manager interface, click
, then click
. On the Setting Card Type interface, select a card type. Click to select display method of card number in decimal or in hex. 54 Setting card type Click OK. 4.3.2 Adding User 4.3.2.1 One by One You can add users one by one manually. Log in to SmartPSS AC. Click Personnel Manger > User > Add. Add basic information of the user. 1) Click the Basic Info tab on the Add User interface, and then add basic information of the user. 55 Add basic information Click the Certification tab to add certification information of the user. Configure password. The password must consist of 68 digits. Configure card. The card number can be read automatically or entered manually. To read the card number automatically, select a card reader, and then place the card on the card reader. 1) Click
, set Card Reader to Device, and then select the device you add from Device. 2) Click Add, swipe a card on the device, and then the card number will be displayed. 3) Click OK. 4) After adding a card, you can set the card to main card or duress card, or replace the card with a new one, or delete the card. Configure fingerprint. 1) Click
, set Fingerprint Collector to Device. 56 2) Click Add Fingerprint and press your finger on the scanner three times continuously. Add password, card, and fingerprint Configure permissions for the user. For details, see "4.4 Assigning Permissions". Permission configuration Click Finish. 4.3.2.2 In Batches You can add users in batches. Log in to SmartPSS AC. Click Personnel Manger > User > Batch Add. Select Device from Device, and then select the device that you add on the right. Configure the following parameters. Start No.: The user IDs of the users you want to add start with the number you defined. 57 Quantity: The number of users you want to add. Department: Select the department you want to add the users to. Effective Time and Expired Time: The users will only have unlocking permissions within the defined time frame. Click Issue to start issuing cards. The card number will be read automatically. Click Stop when you finish issuing cards. Click OK. Add users in batches In the user list, click to edit the information of the users added. Assigning Permissions Add needed devices to a permission group, and then users in the group can unlock corresponding doors. Click Permission configuration. Click Enter the group name, remarks (optional), and select a time template. Select the devices you need. Click OK. 58 Create a permission group of the permission group you added. Click Select the users you want to add to the permission group. Click OK. Users in the permission group can now swipe their cards, or use other unlock methods to unlock the door. Add users to a permission group 59 Fingerprint Registration Instructions Before register your fingerprints, pay attention to the following:
Make sure that your fingers are clean and dry. Press your finger on the center of the fingerprint scanner. Do not put the fingerprint sensor in a place with intense light, high temperature, and high humidity. If your fingerprints are unclear, use other unlocking methods. Fingers Recommended Forefingers, middle fingers, and ring fingers are recommended. Thumbs and little fingers cannot be put at the recording center easily. Appendix Figure 1-1 Recommended fingers How to Press Your Fingerprint on the Scanner Appendix Figure 1-2 Correct 60 Appendix Figure 1-3 Wrong 61 62 Cybersecurity Recommendations Mandatory actions to be taken for cybersecurity 1. Use a strong password Refer to the following recommendations for setting up the password:
The length should not be less than 8 characters A strong password is comprised of at least two of these three character types: letters in upper and lower cases, numbers, and special characters. Do not contain the username in its forward or reverse sequence. Do not use continuous characters, such as 123 and abc. Do not use repeated characters, such as 111 and aaa. 2. Timely update firmware and client software As is standard procedure in the tech-industry, the firmware of devices should be timely updated to the latest version to ensure the system is current with the latest security patches and fixes. With the device connected into Internet, it is recommended to turn on automatic online update detection to timely get firmware updates launched by providers. You are recommended to download and use the latest client software. Recommended measures to enhance cybersecurity:
1. Physical protection Physical protection is recommended for devices (especially storage devices), such as placing them in a special room, special cabinet, and well conduct access control and key control to prevent damages to hardware and external devices (U disk, serial ports) by unauthorized persons through physical contact. 2. Change Passwords Regularly Regularly change the passwords to your devices to help ensure that only authorized users are able to access the system. 3. Timely set up and update password resetting information This device supports password reset. To reduce the risk of this function being attacked by hackers, it is recommended to timely set up password reset, including reserved phone number/email, and security questions. If any of such information changes, update the password reset in time. When setting up security questions, set up an answer that is difficult for someone to guess their way into your system. 4. Enable account lock-down Account lock-down is enabled by default. To keep your Account safe, it is recommended to keep this setting. After hackers fail multiple attempts to hack passwords, the corresponding Account and source IPs are locked. 5. Change HTTP and other default service ports These ports can be changed to any set of numbers between 102465535. Avoiding the default ports reduces the risk of hackers being able to guess which ports you are using. 6. Enable HTTPS Enable HTTPS to access Web services through safe channels. 7. Bind MAC Address Bind the IP and MAC address of the gateway device to reduce the risk of ARP deception. 8. Reasonably allocate account and permission 63 Add users properly according to business and management needs, and allocate minimum sets of permissions to them. 9. Turn off Unnecessary Services and Use Safe Modes If not needed, SNMP, SMTP and UPnP can be turned off to reduce the risks for the device. If necessary, it is strongly recommended to use safe modes, including but not limited to:
SNMP: Select SNMP v3 and set a stronger encryption password and authentication password. SMTP: Select TLS to access to the email server. FTP: Select SFTP and set a strong password. AP hotspot: Select WPA2-PSK encryption mode and set a strong password. 10. Audio and Video Encrypted Transmission If your audio/video data includes important or sensitive contents, use encrypted transmission to make it more difficult for someone to steal your data. 11. Security Audit Review online users: Do this from time to time to find out illegal login, if any. Review device log: This gives you the IP data of a device trying to login and the critical operation information of users already in the login status. 12. Network Log Limited storage capacity of the device cannot store many logs for a long time. If you need to save logs for long, enable online log to ensure key logs are synced to the online log server for easy back tracking. 13. Building Safe Network Environment To keep the device safer and reduce network risks, we recommend you to:
Turn off the port mapping of the router to prevent external networks from directly accessing services of router intranet devices. Divide network into different partitions as needed: If two subnetworks do not have to establish communications, use VLAN or gatekeeper for network division. Build up the 802.1x access authentication to reduce the risk of illegal terminals connecting with your private networks. Enable device IP/MAC address filtering to limit the hosts that can access the device. 64 Legal and Regulatory Information Legal Considerations Video surveillance can be regulated by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes. Disclaimer Every care has been taken in the preparation of this document. Please inform your nearest Dahua office of any inaccuracies or omissions. Dahua Technology shall not be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Dahua Technology makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Dahua Technology shall not be liable or responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material. This product is only to be used for its intended purpose. Intellectual Property Rights Dahua Technology retains all intellectual property rights relating to technology embodied in the product described in this document. Equipment Modifications This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user-serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals. Trademark Acknowledgments
, trademarks or trademark applications of Dahua Technology in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. are registered
, Regulatory Information European Directives Compliance This product complies with the applicable CE marking directives and standards:
Low Voltage (LVD) Directive 2014/35/EU. Electromagnetic Compatibility (EMC) Directive 2014/30/EU. Restrictions of Hazardous Substances (RoHS) Directive 2011/65/EU and its amending Directive (EU) 2015/863. A copy of the original declaration of conformity may be obtained from Dahua Technology. The most up to date copy of the signed EU Declaration of Conformity (DoC) can be downloaded from: www.dahuasecurity.com/support/notice/
CE-Electromagnetic Compatibility (EMC) This digital equipment is compliant with Class A according to EN 55032. Warning:
This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. CE-Safety This product complies with IEC/EN/UL 60950-1 or IEC/EN/UL 62368-1, Safety of Information Technology Equipment. Declaration of Conformity CE
(Only for the product has RF function) Hereby, Dahua Technology declares that the radio equipment is compliant with Radio Equipment Directive (RED) 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
www.dahuasecurity.com/support/notice/
USA Regulatory Compliance FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. Attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Statement https://us.dahuasecurity.com/support/notices/
downloaded SDOC from:
can be RF exposure warning
(Only for the product has RF communication function) This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Canada Regulatory Compliance ICES-003 This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la Classe A est conforme la norme NMB-003 du Canada. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. RF exposure warning
(Only for the product has RF communication function) This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Cet quipement doit tre install et utilis une distance minimale de 20 cm entre le radiateur et votre corps. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Japan Regulatory Compliance VCCI These products comply with the requirements of VCCI Class A Information Technology Equipment. CAUTION This is a Class A equipment. Operation of this equipment in a residential environment could cause radio interference. In such a case, the user may be required to take corrective actions. Batteries Correct disposal of batteries in this product This marking on the battery indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in Directive 2006/66/EC and its amending Directive 2013/56/EU. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. CAUTION Do not ingest battery. Chemical Burn Hazard. This product contains a coin cell battery. If the coin cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. CAUTION Risk of explosion if the battery is replaced by an incorrect type. Do not throw or immerse into water, heat to more than 100(212), repair or disassemble, leave in an extremely low air pressure environment or extremely high-temperature environment, crush, puncture, cut or incinerate. Dispose of the battery as required by local ordinances or regulations. Safety The product complies with IEC/EN/UL 60950-1, Information Technology Equipment Safety Part 1: General Requirements; or complies with IEC/EN/UL 62368-1, Audio/video, information and communication technology equipment Part 1: Safety requirements. If the power supply to the product is from external power adaptor without connecting to AC Mains, and the product is not shipped with power adaptor, customers are required to use the external power adaptor that must fulfill the requirements for Safety Extra Low Voltage (SELV) and Limited Power Source
(LPS). Waste Electrical and Electronic Equipment (WEEE) statements Disposal and Recycling When this product has reached the end of its useful life, dispose of it according to local laws and regulations. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. In accordance with local legislation, penalties may be applicable for incorrect disposal of this waste. This symbol means that the product shall not be disposed of together with household or commercial waste. Directive 2012/19/EU on waste electrical and electronic equipment (WEEE) is applicable in the European Union member states. To prevent potential harm to human health and the environment, the product must be disposed of in an approved and environmentally safe recycling process. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. Businesses should contact the product supplier for information about how to dispose of this product correctly. Privacy Protection Notice As the device user or data controller, you might collect personal data of others such as face, fingerprints, car plate number, Email address, phone number, GPS and so on. You need to be in compliance with the local privacy protection laws and regulations to protect the legitimate rights and interests of other people by implementing measures, including but not limited to: providing clear and visible identification to inform data subject the existence of surveillance area and providing related contact. About the Manual The manual is for reference only. If there is inconsistency between the manual and the actual product, the actual product shall prevail. We are not liable for any loss caused by the operations that do not comply with the manual. The manual would be updated according to the latest laws and regulations of related jurisdictions. For detailed information, refer to the paper manual, CD-ROM, QR code or our official website. If there is inconsistency between paper manual and the electronic version, the electronic version shall prevail. All the designs and software are subject to change without prior written notice. The product updates might cause some differences between the actual product and the manual. Please contact the customer service for the latest program and supplementary documentation. There still might be deviation in technical data, functions and operations description, or errors in print. If there is any doubt or dispute, we reserve the right of final explanation. Upgrade the reader software or try other mainstream reader software if the manual (in PDF format) cannot be opened. All trademarks, registered trademarks and the company names in the manual are the properties of their respective owners. Please visit our website, contact the supplier or customer service if there is any problem occurring when using the device. If there is any uncertainty or controversy, we reserve the right of final explanation. Support Should you require any technical assistance, please contact your Dahua distributor. If your questions cannot be answered immediately, your distributor will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:
Download user documentation and software updates. Search by product, category, or phrase. Report problems to Dahua support staff by logging in to your private support area. Chat with Dahua support staff. Visit Dahua Support at www.dahuasecurity.com/support Contact Information ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Address: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Postcode: 310053 Tel: +86-571-87688883 Fax: +86-571-87688815 Email: overseas@dahuatech.com Website: www.dahuasecurity.com English Important Safeguards and Warnings This Chapter describes the contents covering proper handling of the device, hazard prevention, and prevention of property damage. Read these contents carefully before using the device, comply with them when using, and keep it well for future reference. Safety Instructions The following categorized signal words with defined meaning might appear in the manual. Signal Words Meaning Indicates a high potential hazard which, if not avoided, will result in death or serious injury. Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury. Indicates a potential risk which, if not avoided, could result in property damage, data loss, lower performance, or unpredictable result. Provides methods to help you solve a problem or save you time. Provides additional information as the emphasis and supplement to the text. Safety Requirement Abide by local electrical safety standards to ensure that the voltage is stable and complies with the power supply requirement of the device. Transport, use, and store the device under the allowed humidity and temperature conditions. Refer to the corresponding technical specifications of device for specific working temperature and humidity. Do not place the device in a location exposed to dampness, dust, extreme hot or cold, strong electronic radiation, or unstable lighting condtions. Do not install the device in a place near the heat source, such as radiator, heater, furnace, or other heat generating device to avoid fire. Prevent liquid from flowing into the device to avoid damge to internal components. Install the device horizontally or install on the stable place to prevent it from falling. Install the device in a well-ventilated place, and do not block the ventilation of the device. Do not disassemble the device arbitrarily. Avoid heavy stress, violent vibration, and soaking during during transportation, storage, and installation. Complete package is necessary during the transportation. Use the factory package or the equivalent for transportation. Battery Low battery power affects the operation of the RTC, causing it to reset at every power-up. When the battery needs replacing, a log message will appear in the products server report. For more information about the server report, see the products setup pages or contact Dahua support. Risk of explosion if the battery is incorrectly replaced. Replace only with an identical battery or a battery which is recommended by Dahua. Dispose of used batteries according to local regulations or the battery manufacturer's instructions. Polski Wane rodki ostronoci i ostrzeenia Niniejszy rozdzia opisuje waciwe sposoby korzystania z urzdzenia, sposoby zapobiegania zagroeniom, a take sposoby zapobiegania uszkodzeniu mienia. Przed rozpoczciem korzystania z urzdzenia zapoznaj si dokadnie z tymi informacjami i zachowaj je na przyszo do celw referencyjnych. Instrukcje dot. bezpieczestwa W podrczniku mog pojawi si nastpujce symbole. Ich znaczenie wyjania ponisza tabela. Symbol Znaczenie ZAGROENIE OSTRZEENIE Oznacza potencjalne zagroenie wysokiego stopnia, ktrego nieuniknicie moe skutkowa powanymi urazami lub mierci. Oznacza potencjalne zagroenie redniego lub niskiego stopnia, ktrego nieuniknicie moe skutkowa pomniejszymi lub rednimi urazami. UWAGA potencjalne ktrego Oznacza nieuniknicie moe skutkowa zniszczeniem mienia, utrat danych, spadkiem wydajnoci lub mie inne nieprzewidziane skutki. zagroenie, Symbol Znaczenie WSKAZWKI Oznacza wskazwki pozwalajce na rozwizanie problemu lub oszczdno czasu. UWAGA Oznacza informacje uzupeniajce tekst gwny. Wymogi dot. Bezpieczestwa Przestrzegaj lokalnych standardw bezpieczestwa elektrycznego celem upewnienia si, e rdo napicia jest stabilne i zgodne z wymogami okrelonymi dla urzdzenia. Urzdzenie naley transportowa, uywa i przechowywa w warunkach o dozwolonym poziomie wilgotnoci i temperatury. Szczegowe informacje na temat wilgotnoci i temperatury roboczej znale mona w odpowiedniej specyfikacji technicznej urzdzenia. Nie umieszczaj urzdzenia w miejscach naraonych na wilgo, kurz, ekstremalne temperatury, silne promieniowanie elektroniczne oraz niestabilne warunki owietleniowe. Nie instaluj urzdzenia w pobliu rde ciepa, takich jak kaloryfery, grzaki, piece bd inne urzdzenia generujce ciepo, aby zapobiega wystpieniu poaru. Zabezpiecz urzdzenie przed dostaniem si do jego wntrza cieczy, poniewa moe to spowodowa uszkodzenie komponentw wewntrznych. lub wybierz stabilne miejsce, Zamontuj urzdzenie poziomo wyeliminowa ryzyko upadku. Zamontuj urzdzenie w dobrze wentylowanym miejscu i upewnij si, e jego otwory wentylacyjne nie s zablokowane. Nie rozmontowuj urzdzenia samodzielnie. Chro urzdzenie przed duymi obcieniami i napreniami, silnymi wibracjami oraz zalaniem zarwno podczas transportu, przechowywania, jak i montau. Na potrzeby transportu wymagane jest korzystanie z kompletnego opakowania. Do transportu uywaj oryginalnego opakowania lub innego zapewniajcego tak aby podobny poziom ochrony. Akumulator Niski poziom naadowania akumulatora wpywa na dziaanie zegara czasu rzeczywistego, powodujc jego resetowanie przy kadym wczeniu. Gdy akumulator wymaga wymiany, w raporcie serwerowym dla produktu pojawi si stosowna wiadomo. Aby uzyska wicej temat raportu serwerowego, zapoznaj si z instrukcjami konfiguracji urzdzenia lub skontaktuj si z personelem pomocy technicznej firmy Dahua. informacji na OSTRZEENIE W przypadku niewaciwej wymiany akumulatora wystpuje zagroenie wybuchem. Akumulator naley zastpowa wycznie takim samym typem lub innym Akumulatory naley utylizowa zgodnie z lokalnymi regulacjami lub typem zalecanym przez firm Dahua. instrukcjami producenta akumulatora. Dansk Vigtige sikkerhedsanvisninger og advarsler Kapitlet beskriver korrekt hndtering af produktet, undgelse af risici og undgelse af skader p ejendom. L s kapitlet omhyggeligt, fr du bruger produktet, overhold alle anvisninger og advarsler under brugen, og gem kapitlet til senere brug. Sikkerhedsanvisninger Flgende signalord med beskrivelse kan forekomme i vejledningen. Signalord Beskrivelse FARE Angiver hj risiko, som, hvis den ikke undgs, kan medfre dd eller alvorlig personskade. ADVARSEL Angiver middel eller lav risiko, som, hvis den ikke undgs, kan medfre lettere til moderat personskade. FORSIGTIG Angiver mulig risiko, som hvis den ikke undgs, kan resultere i skade p ejendom, tab af data, reduceret ydelse eller uforudsigelige resultater. TIPS Indeholder forslag, som hj lper dig med at lse et problem eller sparer tid. BEM RK Indeholder yderligere oplysninger, som understreger og supplerer teksten. Sikkerhedskrav Flg lokale standarder for elsikkerhed for at sikre, at sp ndingen er stabil og i overensstemmelse med produktets krav til strmforsyning. Transportr, brug og opbevar produktet i henhold til de tilladte klimatiske forhold (temperatur og luftfugtighed). Se produktets tekniske specifikationer for specifik temperatur og luftfugtighed ved drift. Placr ikke produktet et sted med fugt, stv, st rk varme eller kulde, st rk elektronisk udstrling eller ustabile lysforhold. Installr ikke produktet i n rheden af en varmekilde, ssom en radiator, et varmeapparat, et centralfyr eller andre varmeafgivende enheder, for at undg ildebrand. Undg, at v ske lber ind i produktet og dermed forrsager skade p de indvendige komponenter. Installr produktet vandret, eller installr det et stabilt sted for at undg, at det falder ned. Installr produktet et sted med god udluftning, og blokr ikke produktets ventilationsbninger. Adskil ikke produktet. Undg st rkt tryk, kraftige vibrationer og gennembldning under transport, opbevaring og installation. Produktet skal v re fuldt emballeret under transport. Brug fabriksemballagen eller tilsvarende til transporten. Batteri Lav batterisp nding pvirker driften af realtidsuret og fr uret til at nulstille, hver gang produktet t ndes. Der vises en logbesked i produktets serverrapport, nr batteriet skal udskiftes. Se konfigurationssiderne til produktet, eller kontakt Dahuas supportteam for at f flere oplysninger om serverrapporten. ADVARSEL Der er risiko for eksplosion, hvis batteriet udskiftes forkert. Udskift kun med et tilsvarende batteri eller et batteri, der anbefales af Dahua. Bortskaf brugte batterier i overensstemmelse med lokale bestemmelser eller batteriproducentens anvisninger. Suomi Trkeit varotoimenpiteit ja varoituksia Tss luvussa kuvataan laitteen asianmukainen ksittely, vaarojen torjunta ja omaisuusvahinkojen estminen. Lue tm sislt huolellisesti ennen laitteen kyttmist ja noudata nit ohjeita, kun kytt laitetta. Silyt ohjeet tulevia tarpeita varten. Turvallisuusohje Seuraavat luokitellut huomiosanat kuvatulla merkityksell saattavat esiinty oppaassa. Huomiosanat Merkitys VAARA VAROITUS HUOMIO Ilmaisee suuren potentiaalisen vaaran, joka johtaa kuolemaan tai vakavaan loukkaantumiseen, jos sit ei vltet. Ilmaisee keskisuuren tai pienen potentiaalisen vaaran, kohtalaiseen joka loukkaantumiseen, jos sit ei vltet. saattaa lievn johtaa tai Ilmaisee mahdollisen vaarallisen tilanteen, joka saattaa tietojen menetykseen, johtaa omaisuusvahinkoon, suoritustehon heikkenemiseen tai odottamattomiin tuloksiin, jos sit ei vltet. VINKIT Tarjoavat apua ongelmien ratkaisemiseen tai sstvt aikaa. HUOMAUTUS Tarjoaa listietoa, joka korostaa tai tydent teksti. Turvallisuusvaatimus Noudata paikallisia shkturvallisuusstandardeja varmistaaksesi, ett jnnite on vakaa ja vastaa laitteen virtalhteelle asetettuja vaatimuksia. Kuljeta, kyt ja silyt laitetta sallituissa kosteus- ja lmptilaolosuhteissa. Katso laitteen erityinen kyttlmptila ja -kosteus laitteen vastaavista teknisist tiedoista. l sijoita laitetta paikkaan, jossa se altistuu kosteudelle, plylle, erittin kuumalle tai kylmlle lmptilalle, voimakkaalle shksteilylle tai epvakaille valaistusolosuhteille. l asenna laitetta lhelle lmmnlhdett, kuten lmppatteria, lmmitint, uunia tai muuta lmp tuottavaa laitetta, tulipalon vlttmiseksi. Vlt nesteen psemist laitteen sislle sisisten komponenttien Asenna laite vaakasuoraan tai asenna se vakaaseen paikkaan estksesi sen vahingoittumisen estmiseksi. kaatumisen. Asenna laite hyvin ilmastoituun paikkaan lk peit laitteen tuuletusaukkoja. l pura laitetta omavaltaisesti. Vlt kovaa rasitusta, voimakasta trin ja kosteutta kuljetuksen, silytyksen ja asennuksen aikana. Kuljetus vaatii tydellisen pakkaamisen. Kyt tehtaan pakkausta tai vastaavaa kuljetuksen aikana. Paristo Alhainen pariston varaustaso vaikuttaa tosiaikakellon (RTC:n) toimintaan nollaten sen jokaisella kynnistyskerralla. Lokiviesti ilmestyy tuotteen palvelinraporttiin, kun paristo on vaihdettava. Listietoa palvelinraportista saat tuotteen asetussivuilta tai ottamalla yhteytt Dahuan tukeen. VAROITUS Rjhdysvaara, jos paristo asetetaan vrin paikalleen. Vaihda vain samanlaiseen paristoon tai Dahuan suosittelemaan paristoon. Hvit kytetyt paristot ja akut paikallisten mrysten tai valmistajan ohjeiden mukaisesti. Magyar Fontos vintzkedsek s figyelmeztetsek A jelen Fejezet lerja az Eszkz megfelel kezelst, a veszlyek megelzst s a vagyoni krok megelzst. Az Eszkz hasznlata eltt olvassa el figyelmesen, a hasznlata sorn tartsa be, s rizze meg jl jvbeni hivatkozs cljra. Biztonsgi utastsok Az tmutatban az albbi meghatrozott figyelmeztetsek jelenhetnek meg. jelentssel br kategorizlt Figyelmeztets Jelents VESZLY Nagy potencilis veszlyt jelez, amely, ha nem kerli el, hallt vagy slyos srlst okoz. FIGYELEM VIGYZAT TIPPEK MEGJEGYZSEK Kzepes vagy kis potencilis veszlyt jelez, amely, ha nem kerli el, enyhe vagy mrskelt srlst okozhat. Olyan potencilis kockzatot jelez, amely, ha nem kerli el, vagyoni krt, adatvesztst, alacsonyabb teljestmnyt vagy kiszmthatatlan eredmnyt okozhat. Olyan mdszereket biztost, amelyek segtenek megoldani a problmjt vagy idt takartanak meg. Tovbbi kiemelsvel s kiegsztsvel. informcikat biztost a szveg Biztonsgi kvetelmnyek Tartsa be a helyi elektromos biztonsgi szabvnyokat annak biztostsa feszltsg stabil s az eszkz ramelltsi rdekben, hogy a kvetelmnynek megfelel legyen. Az eszkzt a megengedett pratartalom s hmrsklet viszonyok kztt trolja. A konkrt zemi hmrskletet s szlltsa, hasznlja, s pratartalmat megtallja az eszkz mszaki lersban. Ne tegye az eszkzt olyan helyre, ahol nedvessgnek, pornak, rendkvli melegnek vagy hidegnek, ers elektronikus sugrzsnak, vagy instabil fnyviszonyoknak van kitve. A tz elkerlse rdekben ne teleptse az eszkzt hforrs, mint pldul raditor, hsugrz, kemence, vagy ms htermel eszkz kzelben lv helyre. A bels alkatrszek krosodsnak elkerlse rdekben akadlyozza meg, hogy folyadk folyjon az eszkzbe. A leessnek megakadlyozsa rdekben az eszkzt vzszintesen teleptse, vagy stabil helyre teleptse. Az eszkzt jl szellz helyre teleptse, s ne blokkolja az eszkz szellzst. nknyesen ne szerelje szt az eszkzt. A szllts, trols s telepts sorn kerlje a nagy ignybevtelt, ers rezgst, s az elztatst. A szllts sorn a teljes csomagolsra szksg van. A szlltshoz gyri csomagolst vagy azzal egyenrtkt hasznljon. Elem Az alacsony elem tltttsgi szint hatssal van az RTC mkdsre, minden bekapcsolskor alaphelyzetbe ll. Amikor az elemet cserlni kell, egy napl zenet jelenik meg a termk szerver jelentsben. A szerver jelentsrl tovbbi informcikat tall a termk belltsi oldalain, vagy forduljon a Dahua tmogatshoz. FIGYELEM Robbansveszly, ha az elemet nem megfelelre cserli. Csak ugyanolyan elemre vagy a Dahua ltal ajnlott elemre cserlje. A hasznlt elemet a helyi elrsok vagy az elemgyrt utastsai szerint rtalmatlantsa.
(RTC), .
. Dahua.
, Dahua. Romnesc Masuri de siguranta si Atentionari Acest capitol descrie indicatiile de utilizare corecta a Dispozitivului , prevenirea pericolului si prevenirea distrugerii proprietatii.Cititi aceste randuri inaintea folosirii Dispozitivului Instructiuni de siguranta Urmatoarele semne categorizate pot aparea in Ghid. Signal Words Meaning PERICOL Indic un risc potenial ridicat care, dac nu este evitat, va duce la deces sau vtmri grave. AVERTIZARE Indic un pericol potenial mediu sau sczut care, dac nu este evitat, poate duce la rni uoare sau moderate. ATENTIE SFATURI NOTA Indic un risc potenial care, dac nu este evitat, ar putea duce la daune materiale, pierderi de date, performane mai sczute sau rezultate imprevizibile. Ofer metode care s v ajute s rezolvai o problem sau s economisii timp. Ofer informaii suplimentare ca accent i supliment la text. Cerinte de siguranta Respectai standardele locale de siguran electric pentru a v asigura c tensiunea este stabil i respect cerinele de alimentare ale dispozitivului. Transportai, utilizai i depozitai dispozitivul sub condiiile de umiditate i temperatur admise. Consultai specificaiile tehnice corespunztoare ale dispozitivului pentru temperatur i umiditate specifice de lucru. Nu aezai dispozitivul ntr-o locaie expus la umezeal, praf, extrem de cald sau rece, de radiaii electronice puternice sau de condiii de iluminare instabile. Nu instalai dispozitivul ntr-un loc n apropierea sursei de cldur, cum ar fi radiatorul, nclzitorul, cuptorul sau alt dispozitiv generator de cldur, pentru a evita incendiul. mpiedicai curgerea lichidului n dispozitiv pentru a evita deteriorarea componentelor interne. Instalai dispozitivul n poziie orizontal sau instalai-l pe un loc stabil pentru a preveni cderea acestuia. Instalai aparatul ntr-un loc bine ventilat i nu blocai ventilaia aparatului. Nu dezasamblai dispozitivul voit. Evitai loviturile puternice, vibraiile violente i umiditatea timpul transportului, depozitrii i instalrii. Este necesar un pachet complet n timpul transportului. n Utilizati pachetul de fabrica sau echvalent in timpul transportului. Bateriile Puterea redus a bateriei afecteaz funcionarea RTC, determinnd resetarea la fiecare pornire. Cnd bateria are nevoie de nlocuire, n raportul serverului produsului va aprea un mesaj de jurnal. Pentru mai multe informaii despre raportul serverului, consultai paginile de configurare ale produsului sau contactai asistena Dahua. AVERTIZARE Risc de explozie dac bateria este nlocuit incorect. nlocuii numai cu o baterie identic sau cu o baterie recomandat de Dahua. Aruncai bateriile uzate n conformitate cu reglementrile locale sau cu instruciunile productorului bateriei. etina Dleit bezpenostn opaten a varovn Tato kapitola popisuje obsah vztahujc se na sprvnou manipulaci se zazenm, prevenci nebezpe a prevenci kod na majetku. Peliv si tyto informace je dodrujte protte ped pouitm zazen, bhem pouvn zazen a uschovejte je pro budouc pouit. Bezpenostn pokyny Tato pruka me obsahovat nsledujc kategorie signlnch slov. Signln slova Vznam NEBEZPE VAROVN UPOZORNN TIPY Oznauje monost zvanho nebezpe, kter, pokud by mu nebylo zamezeno, me mt za nsledek smrt nebo vn zrann. Oznauje monost stedn nebo mlo zvanho nebezpe, kter, pokud by mu nebylo zamezeno, me mt za nsledek lehk nebo nepli zvan zrann. Oznauje mon riziko, kter, pokud by mu nebylo zamezeno, me mt za nsledek kodu na majetku, ztrtu dat, snen vkonu nebo neoekvan vsledek. Uvd metody, kter vm pomohou vyeit problm nebo vm uet as. POZNMKA Poskytuje dodaten informace formou drazu a doplnn textu. Bezpenostn poadavek Dodrujte mstn normy pro elektrickou bezpenost pro zajitn stabilnho napt a dodren poadavk na napjen zazen. Zazen pepravujte, pouvejte a skladujte pi odpovdajc teplot a vlhkosti. Konkrtn pracovn teplotu a vlhkost naleznete v pslunch technickch specifikacch zazen. Neumsujte zazen tam, kde bude vystaveno vlhkosti, prachu, extrmnmu horku nebo chladu, silnmu elektronickmu zen nebo nestabilnm svtelnm podmnkm. Neinstalujte zazen v blzkosti zdroj tepla, jako je raditor, ohva, kotel nebo jin zazen generujc teplo, aby nedolo k poru. Zamezte proniknut kapalin do zazen, aby nedolo k pokozen jeho Zazen instalujte vodorovn nebo je instalujete na stabilnm mst, aby bylo vnitnch soust. chrnno ped pdem. Zazen instalujte na dobe vtranm mst a neblokujte odvtrvn zazen. Zazen svvoln nedemontujte. Bhem pepravy, skladovn a instalace zamezte silnmu tlaku, prudkm vibracm a namoen. Pi peprav je nezbytn pln zabalen. Pi peprav pouijte obal z vroby nebo obdobn obal. Baterie Nzk nabit baterie ovlivuje fungovn hodin ve skutenm ase a zpsobuje, e se pi kadm sputn resetuj. V ppad, e je teba baterii vymnit, se v serverov zprv produktu zobraz zprva protokolu. Dal informace o serverov zprv naleznete na strnkch o nastaven produktu, ppadn kontaktujte podporu spolenosti Dahua. VAROVN Nebezpe vbuchu v ppad nesprvn vmny baterie. Vymte pouze za totonou baterii nebo baterii doporuenou spolenost Pouit baterie likvidujte v souladu s mstnmi pedpisy nebo pokyny vrobce Dahua. baterie.
. . RTC,
, Dahua. Dahua. hrvatski Vane zatitne mjere i upozorenja Ovo poglavlje opisuje sadraj koji obuhvaa pravilno rukovanje ureajem, sprjeavanje opasnosti i spreavanje oteenja imovine. Paljivo proitajte ove sadraje prije koritenja Ureaja, pridravajte ih se pri upotrebi i sauvajte ih za buduu uporabu. Sigurnosne upute U vodiu se mogu pojaviti sljedee kategorizirane signalne rijei s definiranim znaenjem. Signal Words Meaning OPASNOST UPOZORENJE OPREZ SAVJETI BILJEKA Sigurnosni zahtjevi izbjegne, rezultirat smru Oznaava veliku potencijalnu opasnost koja e, ako se ne ili ozbiljnim ozljedama. Oznaava srednju ili malu potencijalnu opasnost koja, ako se ne izbjegne, moe rezultirati malom ili umjerenom ozljedom. Ukazuje na potencijalni rizik koji, ako se ne imovine, izbjegne, moe rezultirati oteenjem gubitkom podataka, manjom uinkovitou ili nepredvidivim rezultatom. Prua vam metode kojim vam pomae rijeiti problem ili e vam utedjeti vrijeme. Prua dodatne informacije kao naglasak i dopunu teksta. Avoid heavy stress, violent vibration, and soaking during during transportation, storage, and installation. Complete package is necessary during the transportation. Pridravajte se lokalnih elektrinih sigurnosnih standarda kako biste osigurali da je napon stabilan i da udovoljava zahtjevima napajanja ureaja. Prijenosite, upotrebljavajte i pohranjujte ureaj pod doputenim uvjetima vlage i temperature. Pogledajte odgovarajue tehnike specifikacije ureaja za odreenu radnu temperaturu i vlagu. Nemojte postavljati ureaj na mjesto izloeno vlazi, praini, ekstremno vruoj ili hladnoj okolini, jakom elektronskom zraenju ili nestabilnim uvjetima osvjetljenja. Kako biste izbjegli poar nemojte postavljati ureaj na mjesto u blizini izvora topline, kao to su radijator, grija, pe ili neki drugi ureaj za stvaranje topline. Sprijeite da tekuina tee u ureaj kako bi se izbjegla teta na unutarnjim dijelovima. sprijeili padanje. Ugradite ureaj vodoravno ili ga postavite na stabilno mjesto kako biste Ugradite ureaj na dobro prozraeno mjesto i ne blokirajte ventilaciju ureaja. Nemojte rastavljati ureaj samovoljno. Izbjegavajte teki stres, nasilne vibracije i natapanje tijekom prijevoza, skladitenja i instalacije. Prilikom prijevoza potrebno je koristiti tvorniko zatitno pakiranje. Koristite tvorniko pakiranje ili ekvivalent za transport. Baterija Niska baterija utjee na rad RTC, uzrokujui da se resetira pri svakom ukljuivanju. Kad bateriju treba zamijeniti, pojaviti e se poruka u izvjeu posluitelja (server). Dodatne informacije o izvjeu posluitelja (server) potraite na stranicama prirunika proizvoda ili se obratite Dahua podrci. UPOZORENJE Rizik od eksplozije ako se baterija nepravilno zamijeni. Zamijeniti samo sa jednakom baterijom ili sa baterijom koja je preporuena od strane Dahua Technology. instructions. Dotrajale baterije trba zbrinuti u skladu sa lokalnim propisima ili u skladu s uputama proizvoaa baterije. Slovenina Dleit bezpenostn pokyny a varovania Tto kapitola obsahuje tkajce sa sprvnej manipulcie so zariadenm, prevencie pred nebezpeenstvom a prevencie pokodenia majetku. Pred pouvanm zariadenia si pozorne pretajte tieto informcie, dodriavajte ich pri pouvan a uchovajte ich na budce pouitie. informcie Bezpenostn pokyny V prruke sa mu nachdza nasledujce kategorizovan signlne vrazy s definovanm vznamom. Signlne vrazy Vznam NEBEZPEENSTVO VAROVANIE POZOR TIPY POZNMKA Oznauje vysok potencilne nebezpeenstvo, ktor spsob smr alebo vne zranenie, ak sa mu nevyhnete. Oznauje stredn alebo nzke potencilne nebezpeenstvo, ktor me ma za nsledok mierne alebo stredne ak zranenie, ak sa mu nevyhnete. Oznauje potencilne riziko, ktor me vies k pokodeniu majetku, strate dajov, zneniu vkonu alebo nepredvdatenmu vsledku, ak sa mu nevyhnete. Poskytuje metdy, ktor vm pomu vyriei problm alebo uetri as. Poskytuje alie informcie ako zdraznenie a doplnenie textu. Poiadavky na bezpenos Dodrujte miestne elektrick bezpenostn normy, aby ste zabezpeili, e naptie je stabiln a zodpoved poiadavkm na napjanie zariadenia. Zariadenie prepravujte, pouvajte a uchovvajte pri povolench podmienkach vlhkosti a teploty. Pretajte si prslun technick pecifikcie zariadenia pre pecifick pracovn teplotu a vlhkos. Zariadenie neumiestujte na miesto vystaven vlhkosti, prachu, extrmnemu teplu alebo chladu, silnmu elektronickmu iareniu alebo nestabilnm podmienkam osvetlenia. Zariadenie neintalujte na miesto, ktor sa nachdza blzko zdroja tepla, ako je naprklad raditor, ohrieva, pec alebo in zariadenie na tvorbu tepla. Preddete tak vzniku poiaru. Zabrte vnikaniu kvapaliny do zariadenia, aby nedolo k pokodeniu vntornch komponentov. Zariadenie naintalujte horizontlne alebo ho naintalujte na stabiln miesto, aby ste zabrnili pdu. Zariadenie naintalujte na dobre vetranom mieste a neblokujte ventilciu zariadenia. Zariadenie svojvone nerozoberajte. Poas prepravy, skladovania a intalcie sa vyhnite silnmu namhaniu, prudkm vibrcim a namaniu. Poas prepravy je potrebne prepravova kompletn balenie. Na prepravu pouite tovrensk balenie alebo jeho ekvivalent. Batria Nzka kapacita batrie ovplyvuje prevdzku RTC, o spsob jeho vynulovanie pri kadom zapnut. Ke je batriu potrebn vymeni, v sprve servera produktu sa zobraz hlsenie. alie informcie o hlsen servera njdete na strnkach s nastaveniami produktu alebo sa obrte na podporu spolonosti Dahua. VAROVANIE Nebezpeenstvo vbuchu, ak je batria nesprvne vymenen. Vymete iba za t ist batriu alebo batriu, ktor odpora spolonos Dahua. Pouit batrie zlikvidujte v slade s miestnymi predpismi alebo pokynmi vrobcu batrie. C Vane Zatitne mere i Upozorenja Ovo poglavlje opisuje sadraj koji pokriva pravilno rukovanje ureajem, spreavanje opasnosti i spreavanje oteenja imovine. Paljivo proitajte ove sadraje pre korienja ureaja, potujte ih kada koristite i uvajte ga za buduu referencu. Bezbednosna Uputstva Sledee kategorije rei sa definisanim znaenjem mogu se pojaviti u Vodiu. Oznaka Znaenje OPASNOST Oznaava visoku potencijalnu opasnost koja e, ako se i ne izbegne, rezultirati smru ili ozbiljnim povredama. Oznaka Znaenje UPOZORENJE Oznaava opasnost srednje ili niske potencijale koja bi, ukoliko se ne izbegne, mogla dovesti do blagih ili umerenih povreda. OPREZ Oznaava potencijalni rizik koji bi, ukoliko se to ne izbegne, mogao dovesti do oteenja imovine, gubitka ili nepredvidivog rezultata. performanse podataka, nie PREPORUKE Prua metode za pomo u reavanju problema ili utede vremena. BELEKA Prua dodatne informacije kao naglasak i dodatak tekstu. Bezbednosna Uputstva Pridravajte se lokalnih standarda elektrine sigurnosti kako biste bili sigurni da je napon stabilan i da odgovara zahtevu za napajanje ureaja. Prevoz, korienje i skladitenje ureaja treba da budu u skladu sa dozvoljenim uslovima vlage temperaturnim uslovima. Pogledajte odgovarajue tehnike specifikacije ureaja koji se odnose na specifinu radnu temperaturu i vlanost vazduha. i Nemojte postavljati ureaj na mesto izloeno vlazi, praini, ekstremnom vruem ili hladnom vazduhu, jakom elektronskom zraenju ili nestabilnim uslovima osvetljenja. Ne postavljajte ureaj na mesto blizu izvora toplote, kao to je radijator, greja, pe ili drugi ureaj za proizvodnju toplote kako biste izbegli poar. Spreite tenost da tee u ureaj kako bi se izbeglo oteenje unutranjih komponenti. Instalirajte ureaj horizontalno ili postavite na stabilno mesto kako biste spreili padanje. Ugradite ureaj na dobro provetreno mesto i ne blokirajte ventilaciju ureaja. Nemojte rastavljati ureaj proizvoljno. Izbegavajte jak pritisak, nasilne vibracije i usisavanje tokom transporta, skladitenja i instalacije. Kompletan paket je neophodan tokom transporta. Koristite fabriko pakovanje ili ekvivalent u toku transporta. Baterija Baterija male snage utie na rad RTC-a, dovodei do reseta pri svakom ukljuivanju. Kada se baterija mora zameniti, logovna poruka e se pojaviti u izvetaju servera proizvoda. Za vie informacija o izvetaju servera, pogledajte stranice za podeavanje proizvoda ili kontaktirajte Dahua podrku. UPOZORENJE Opasnost od eksplozije ako se baterija nepravilno zameni. Zamenite je samo sa identinom baterijom ili sa baterijom koju preporuuje Odloite iskoriene baterije u skladu sa lokalnim propisima ili uputstvima Dahua. proizvoaa baterije. Trke nemli Kurallar ve Uyarlar Bu Blm, Cihazn doru kullanmn, tehlike nlemeyi ve mal zararnn nlenmesini kapsayan ierikleri anlatmaktadr. Cihaz kullanmadan nce bu ierikleri dikkatli ekilde okuyun, kullanrken bunlara uyun ve ileride bavurmak zere saklayn. Gvenlik Talimatlar Aada, belirtilen aklamaya sahip kategorize edilmi uyar szcklerini Klavuzda grebilirsiniz. Uyar Szckleri Anlam TEHLKE ciddi durumunda lm Kanlmamas yaralanmalara neden olacak yksek potansiyelli bir tehlikeyi belirtir. veya UYARI Kanlmamas durumunda hafif veya orta dereceli yaralanmaya neden olabilecek orta veya dk potansiyelli bir tehlikeyi belirtir. DKKAT Kanlmamas durumunda mal hasarna, veri kaybna, dk performansa veya tahmin edilemeyen sonuca neden olabilecek potansiyel bir riski belirtir. PULARI Bir problemi zmenize veya zamandan etmenize yardmc olmak iin yntemler sunar. tasarruf NOT Metne pekitirme ve ek olarak ilave bilgiler salar. Gvenlik Gereksinimi Voltajn is istikrarl olduundan ve cihazn g kayna gereksinimine uygun olduundan emin olmak iin yerel elektrik gvenlii standartlarna uyun. Cihaz izin verilen nem ve scaklk artlar altnda nakledin, kullann ve saklayn. Belirli alma scakl ve nem deerleri iin cihazn ilgili teknik zelliklerine bakn. Cihaz rutubete, toza, ar scaa veya soua, gl elektronik radyasyona veya deiken aydnlatma artlarna maruz kalan bir yere yerletirmeyin. Yangn nlemek iin cihaz radyatr, stc, frn veya baka s reten cihazlar gibi s kaynana yakn bir yere monte etmeyin. erisindeki paralarn hasar grmesini nlemek iin cihazn ierisine svlarn girmesini nleyin. Cihazn dmesini nlemek iin yatay olarak veya dayankl bir yere monte edin. Cihaz iyi havalandrlan bir yere monte edin ve cihazn hava sirklasyonunu engellemeyin. Cihazn paralarn geliigzel skmeyin. Cihazn nakliyesi, saklanmas ve montaj esnasnda ar basklardan, iddetli sarsntlardan ve svya batmalardan kann. Cihazn nakliyesi esnasnda ambalajn tamam gereklidir. Nakliye iin fabrikasyon ambalaj ya da e deerini kullann. Pil Dk pil gc, her g ama esnasnda sfrlanmasna neden olarak RTCnin almasn etkiler. Pillerin deitirilmesi gerektiinde rnn sunucu raporunda bir gnlk iletisi grntlenir. Sunucu raporu hakknda daha fazla bilgi iin rnn kurulum sayfalarna bakn veya Dahua destek merkeziyle iletiime gein. UYARI Pil yanl ekilde taklrsa patlama tehlikesi. Sadece ayn trde veya Dahua tarafndan nerilen bir pil takn. Eski pilleri, yerel ynetmeliklere veya pil reticisinin talimatlarna gre elden karn.
-RTC .
, Dahua. Dahua. Franais Prcautions et avertissements importants Le contenu de ce chapitre aborde la bonne manipulation de lappareil, la prvention des risques et la prvention des dommages matriels. Lisez ce contenu soigneusement avant dutiliser lappareil, respectez-le lorsque vous lutilisez, et conservez-le pour vous y rfrer ultrieurement. Prcautions demploi Les mentions davertissement catgorises suivantes ayant un sens dfini sont susceptibles dapparatre dans le manuel. Mentions davertissement Signification DANGER Indique un danger risque lev qui entranera la mort ou des blessures graves si les instructions donnes ne sont pas respectes. AVERTISSEMENT AVERTISSEMENT une ou Indique faiblement dangereuse qui entranera des blessures faibles ou modres si les instructions donnes ne sont pas respectes. situation moyennement Indique une situation potentiellement dangereuse qui pourra entraner des dommages de la proprit, des pertes de donnes, une rsultats performance moindre imprvisibles, si les instructions donnes ne sont pas respectes. des ou ASTUCES REMARQUE Fournit des instructions qui vous permettront de rsoudre un problme ou de vous faire gagner du temps. Fournit des informations supplmentaires pour mettre en vidence et complter le texte. Exigences de scurit les spcifications temprature autorises. Consultez Respectez les normes de scurit lectrique locales pour vous assurer que la tension est stable et conforme aux exigences dalimentation de lappareil. Transportez, utilisez et stockez lappareil dans les conditions dhumidit et de techniques correspondantes de lappareil pour connatre la temprature et lhumidit de fonctionnement spcifiques. Ne placez pas lappareil dans un lieu expos lhumidit, la poussire, une chaleur ou un froid extrme, de forts rayonnements lectroniques, ou des conditions dclairage instables. Ninstallez pas lappareil prs dune source de chaleur telle quun radiateur, un chauffage, une chaudire, ou tout autre dispositif gnrant de la chaleur afin dviter les risques dincendie. Empchez aux liquides de couler sur lappareil afin dviter dendommager les composants internes. Installez lappareil horizontalement ou sur une surface stable afin de lempcher de tomber. Installez lappareil dans un lieu bien ventil et ne bloquez pas la ventilation de lappareil. Ne dmontez pas lappareil de faon arbitraire. Au cours du transport, du stockage et de linstallation de lappareil, vitez de le soumettre de fortes contraintes, des vibrations violentes ou une immersion. Lemballage complet est ncessaire au cours du transport. Utilisez lemballage dusine ou quivalent pour le transport. Batterie Un niveau de batterie faible affecte le fonctionnement du RTC, qui se rinitialisera chaque redmarrage. Lorsque la batterie doit tre remplace, un message de journal apparat dans le rapport du serveur du produit. Pour plus dinformations sur le rapport du serveur, consultez les pages de configuration du produit ou contactez lassistance Dahua. AVERTISSEMENT Risque dexplosion si la batterie est remplace de faon incorrecte. Remplacez la batterie uniquement par une batterie recommande par Dahua. liminez les batteries usages conformment aux rglementations locales ou aux instructions du fabricant de la batterie. Espaol(Espaa) Advertencias y precauciones de seguridad impo rtantes En este captulo se describe el contenido que cubre la manipulacin correcta del dispositivo, la prevencin de riesgos y la prevencin de daos materiales. Lea detenidamente este contenido antes de usar el dispositivo, sgalo cuando lo utilice y consrvelo para consultas futuras. Instrucciones de seguridad Las siguientes palabras de advertencia con un significado definido podran aparecer en la gua. Palabras de advertencia Significado PELIGRO ADVERTENCIA Indica un riesgo potencial alto que, si no se evita, resultar en muerte o lesiones graves. Indica un riesgo potencial medio o bajo que, si no se evita, podra resultar en lesiones leves o moderadas. PRECAUCIN CONSEJOS NOTA Requisitos de seguridad Indica un riesgo potencial que, si no se evita, podra resultar en daos materiales, prdida de datos, resultados impredecibles. rendimiento menor o Ofrece mtodos para ayudarle a resolver un problema o ahorrar tiempo. Proporciona informacin adicional como hincapi y complemento para el texto. Cumpla las normas locales de seguridad elctrica para garantizar que la tensin sea estable y cumpla los requisitos de alimentacin elctrica del dispositivo. Transporte, utilice y almacene el dispositivo bajo las condiciones de humedad tcnicas temperatura permitidas. Consulte las especificaciones y correspondientes del dispositivo para la temperatura y humedad operativas especficas. No coloque el dispositivo en un lugar expuesto a humedad, polvo, calor o fro extremos, radiaciones electrnicas fuertes o condiciones de iluminacin inestables. No instale el dispositivo en un lugar cerca de fuentes de calor, como radiadores, calentadores, hornos u otros dispositivos generadores de calor, para evitar un incendio. No deje que entre lquido en el dispositivo para evitar daos en los componentes internos. Instale el dispositivo horizontalmente o instlelo sobre un lugar estable para evitar que caiga. Instale el dispositivo en un lugar bien ventilado y no obstruya la ventilacin. No desmonte de forma arbitraria el dispositivo. Evite las presiones excesivas, las vibraciones violentas y mojar el dispositivo durante el transporte, almacenamiento e instalacin. Es necesario utilizar el embalaje completo durante el transporte. Utilice el embalaje de fbrica o uno equivalente para transportarlo. Pilas La baja batera afecta al funcionamiento del RTC, provocando que se restablezca cada vez que recibe alimentacin. Cuando sea necesario sustituir las pilas, aparecer un mensaje de registro en el informe de servidor del producto. Para ms informacin acerca del informe de servidor, consulte las pginas de configuracin del producto o pngase en contacto con el departamento de soporte de Dahua. ADVERTENCIA Riesgo de explosin si se sustituyen incorrectamente las pilas. Sustityalas nicamente por pilas idnticas o pilas recomendadas por Dahua. Elimine las pilas gastadas en conformidad con la normativa local o las instrucciones del fabricante de las pilas. Deutsch Wichtige Sicherheits- und Warnhinweise Dieses Kapitel beschreibt die Inhalte zum richtigen Umgang mit dem Gert, zur Verhtung von Gefahren und zur Vermeidung von Sachschden. Lesen Sie dieses Kapitel sorgfltig durch, bevor Sie das Gert verwenden, halten Sie die Anweisungen bei der Verwendung ein und bewahren Sie diese Anleitung zum spteren Nachlesen gut auf. Sicherheitshinweise Die folgenden kategorisierten Signalwrter mit definierter Bedeutung knnen in der Kurzanleitung verwendet werden. Signalwrter Bedeutung GEFAHR Weist auf ein hohes Gefahrenpotential hin, das, wenn es nicht vermieden wird, zum Tod oder zu schweren Verletzungen fhrt. Signalwrter WARNUNG VORSICHT TIPPS HINWEIS Bedeutung Weist auf eine mittlere oder geringe potentielle Gefahr hin, die, wenn sie nicht vermieden wird, zu leichten oder mittelschweren Verletzungen fhren kann. Weist auf ein potenzielles Risiko hin, das, wenn es nicht vermieden wird, zu Sachschden, Datenverlust, geringerer Leistung oder unvorhersehbaren Ergebnis fhren kann. Stellt Methoden bereit, mit denen Sie ein Problem lsen oder Zeit sparen knnen. Bietet zustzliche Informationen als Schwerpunkt und Ergnzung zum Text. Sicherheitsanforderungen Halten Sie sich an die rtlichen elektrischen Sicherheitsnormen, um sicherzustellen, dass die Spannung stabil ist und den Anforderungen an die Stromversorgung des Gerts entspricht. Transportieren, verwenden und lagern Sie das Gert unter den zulssigen Feuchtigkeits- und Temperaturbedingungen. Die entsprechenden technischen Spezifikationen des Gerts jeweilige Betriebstemperatur und Luftfeuchtigkeit sind zu beachten. fr die Stellen Sie das Gert nicht an Orten auf, an denen es Feuchtigkeit, Staub, extremer Hitze oder Klte, starker elektronischer Strahlung oder instabilen Lichtverhltnissen ausgesetzt ist. Installieren Sie das Gert nicht in der Nhe einer Wrmequelle, z. B. einem Heizkrper, Heizlfter, Ofen oder anderen Wrme erzeugenden Gerten, um Feuer zu vermeiden. Verhindern Sie, dass Flssigkeit in das Gert fliet, um Schden an internen Bauteilen zu vermeiden. Installieren Sie das Gert waagerecht oder an einem stabilen Ort, damit es nicht herunterfllt. Installieren Sie das Gert an einem gut belfteten Ort und blockieren Sie die Belftung des Gerts nicht. Nehmen Sie das Gert nicht eigenmchtig auseinander. Vermeiden Sie starke Belastungen, Vibrationen und eindringende Nsse whrend des Transports, der Lagerung und der Installation. Das Gert sollte immer vollstndig verpackt transportiert werden. Verwenden Sie die ab Werk verwendete Verpackung oder eine gleichwertige Verpackung fr den Transport. Batterie Eine niedrige Batterieleistung beeintrchtigt den Betrieb der Echtzeituhr, wodurch sie bei jedem Einschalten zurckgesetzt wird. Wenn die Batterie ausgetauscht werden muss, wird eine Protokollmeldung im Serverbericht des Produkts angezeigt. Weitere finden Sie auf den Informationen zum Serverbericht Einrichtungsseiten des Produkts oder wenden Sie sich an den Support von Dahua. WARNUNG nicht Bei ordnungsgemem Austausch der Batterie besteht Explosionsgefahr. Ersetzen Sie die Batterie nur durch eine identische Batterie oder eine Batterie, die von Dahua empfohlen wird. Entsorgen Sie leere Batterien entsprechend den rtlichen Vorschriften oder den Anweisungen des Batterieherstellers. Italiano Norme di sicurezza e avvertenze importanti Il presente capitolo descrive le procedure per una corretta manipolazione del dispositivo, per la prevenzione dei rischi e per la prevenzione di danni materiali. Leggere attentamente queste informazioni prima di utilizzare il dispositivo, attenersi alle istruzioni fornite durante luso e conservarle come futuro riferimento. Istruzioni di sicurezza I seguenti indicatori di pericolo, aventi i significati indicati, possono apparire nella presente guida. Indicatori di pericolo Significato PERICOLO AVVERTENZA Indica una situazione ad alto rischio che, se non viene evitata, pu causare il decesso o gravi lesioni. Indica una situazione a medio o basso rischio che, se non viene evitata, pu causare lesioni di leggera o moderata entit. ATTENZIONE Indica un rischio potenziale che, se non evitato, pu causare danni materiali, perdite di dati, riduzione delle prestazioni o altre conseguenze imprevedibili. CONSIGLI NOTA Spiegano metodi utili per risolvere un problema o per aiutarvi a risparmiare tempo. Fornisce informazioni aggiuntive che completano quelle riportate nel testo. Requisiti di sicurezza Attenersi alle leggi locali sulla sicurezza elettrica per garantire una tensione stabile e soddisfare i requisiti di alimentazione del dispositivo. Trasportare, utilizzare e conservare il dispositivo alle condizioni di umidit e tecniche del temperatura consentite. Fare riferimento alle specifiche dispositivo per conoscere i valori specifici della temperatura di esercizio e dellumidit. Non posizionare il dispositivo in un ambiente esposto ad una eccessiva umidit, a polvere, a condizioni di caldo e freddo estremi, a forti radiazioni elettroniche o a condizioni di illuminazione non stabile. Non installare il dispositivo vicino ad una fonte di calore, quali ad esempio radiatori, apparecchi di riscaldamento, forni o altri dispositivi di generazione del calore, per evitare il rischio di incendio. Evitare di versare liquido sul dispositivo per non danneggiare i componenti interni. Installare il dispositivo in posizione orizzontale, oppure in una zona stabile, per evitare che possa cadere. Installare il dispositivo in un ambiente adeguatamente ventilato e non ostruire la circolazione dell'aria. Non smontare il dispositivo in modo casuale. Evitare forte sollecitazioni, violente vibrazioni e non bagnare il prodotto durante il trasporto, lo stoccaggio e linstallazione. Trasportare il prodotto utilizzando un imballaggio adeguato. Utilizzare l'imballaggio standard previsto o un imballaggio equivalente. Batteria Luso di una batteria scarica pu compromettere il funzionamento del dispositivo RTC, che si resetter ad ogni avvio. Quando necessario sostituire la batteria, nel report del server del prodotto viene visualizzato un messaggio di log. Per ulteriori informazioni sul report del server, leggere le pagine di configurazione del prodotto, oppure contattare il servizio assistenza di Dahua. AVVERTENZA Se la batteria non viene sostituita correttamente, pu generare il rischio di esplosione. Sostituire solo con una batteria identica o una batteria raccomandata da Dahua. Smaltire le batterie usate in conformit con le normative locali o attenendosi alle istruzioni del produttore della batteria. Nederlands Belangrijke voorzorgsmaatregelen en waarschuwingen Dit hoofdstuk beschrijft de inhoud die de juiste omgang met het apparaat behandelt, het voorkomen van gevaren alsmede het voorkomen van materile schade. Lees deze inhoud zorgvuldig door voordat u het apparaat gebruikt, houdt u eraan tijdens het gebruik, en bewaar ze goed voor toekomstige referentie. Veiligheidsinstructies De volgende gecategoriseerde signaalwoorden met gedefinieerde betekenis staan in de handleiding vermeld. Signaalwoorden GEVAAR WAARSCHUWING LET OP TIPS Betekenis Geeft een hoog potentieel gevaar aan dat, indien niet voorkomen, kan leiden tot overlijden of ernstig. Geeft een gemiddeld of laag potentieel gevaar aan dat, indien niet voorkomen, kan leiden tot licht of matig letsel. Geeft een potentieel risico aan dat, indien niet voorkomen, kan leiden tot materile schade, gegevensverlies, of lagere onvoorspelbaar resultaat. prestaties Biedt methodes om u te helpen een probleem op te lossen of tijd te besparen. OPMERKING Biedt aanvullende informatie als nadruk op en aanvulling van de tekst. Veiligheidsvereiste Houdt u aan plaatselijke veiligheidsstandaarden om ervoor te zorgen dat het voltage stabiel is en voldoet aan de vereiste stroomvoorziening van het apparaat. Transporteer, gebruik en bewaar het apparaat onder de toegestane relatieve luchtvochtigheid en temperatuuromstandigheden. Zie de overeenkomstige technische specificaties van het apparaat voor specifieke werktemperatuur en relatieve luchtvochtigheid. Plaats het apparaat niet op een locatie die blootgesteld is aan vocht, stof, extreme hitte of koude, sterke elektronische straling of onstabiele verlichtingsomstandigheden. Installeer het apparaat niet op een plek vlakbij de warmtebron, zoals een radiator, verwarming, fornuis of ander warmte-genererend apparaat om brand te voorkomen. Voorkom dat er vloeistof in het apparaat loopt om schade aan interne componenten te vermijden. Installeer het apparaat horizontaal of installeer het op een stabiele plek om te voorkomen dat het valt. Installeer het apparaat in een goed geventileerde ruimte en blokkeer de ventilatie van het apparaat niet. Haal het apparaat niet willekeurig uit elkaar. Vermijd zware druk, hevige trilling en nat worden tijdens het transport, de opslag en de installatie. De complete verpakking is noodzakelijk tijdens het transport. Gebruik de fabrieksverpakking of gelijkwaardig voor het transport. Batterij Lage batterijstroom benvloedt de bediening van de RTC, waardoor deze bij iedere stroominschakeling reset. Als de batterij vervangen moet worden, verschijnt een logbericht in het serverrapport van het product. Zie voor meer informatie over het serverrapport de setuppagina's van het product of neem contact op met Dahua Support. WAARSCHUWING Gevaar op ontploffing als de batterij onjuist wordt vervangen. Vervang alleen met een identieke batterij die wordt aanbevolen door Dahua. Verwerk de gebruikte batterijen volgens de plaatselijke regelgeving of de instructies van de batterijfabrikant. Portugus Instrues e advertncias importantes Este captulo descreve os contedos relativos ao manuseamento correto do dispositivo, preveno de riscos e preveno de danos materiais. Leia estes contedos atentamente antes de utilizar o dispositivo, respeite as instrues durante a utilizao e guarde-as em boas condies para consulta futura. Instrues de segurana As seguintes palavras-sinal categorizadas, com um significado definido, podero surgir no Guia. Palavras-sinal PERIGO AVISO ATENO Significado Indica um risco potencial elevado que, se no for evitado, resultar em morte ou ferimentos graves. Indica um risco potencial mdio ou baixo que, se no for evitado, poder resultar em ferimentos ligeiros ou moderados. Indica um risco potencial que, se no for evitado, pode resultar em danos materiais, perda de dados, desempenho inferior ou resultados imprevisveis. SUGESTES Disponibiliza mtodos para o ajudar a resolver um problema ou a poupar o seu tempo. NOTA Disponibiliza informaes adicionais como destaque e complemento ao texto. Requisitos em termos de segurana Respeite as normas locais de segurana eltrica de forma a garantir que a tenso estvel e respeita os requisitos da fonte de alimentao do dispositivo. Transporte, utilize e armazene o dispositivo nas condies de humidade e temperatura permitidas. Consulte as respetivas especificaes tcnicas do dispositivo para conhecer a temperatura e humidade de funcionamento especficas. No coloque o dispositivo num local exposto a humidade, poeira, condies de calor ou frio extremas, radiao eletrnica intensa ou condies de iluminao instveis. No instale o dispositivo num local prximo de uma fonte de calor, como, por exemplo, um radiador, aquecedor, fornalha ou outro dispositivo de gerao de calor de forma a evitar incndios. No permita o escorrimento de lquidos para o dispositivo, evitando, assim, danos nos componentes internos. Instale o dispositivo numa posio horizontal ou num local estvel, prevenindo possveis quedas. Instale o dispositivo num local bem ventilado e no bloqueie a ventilao do dispositivo. No desmonte o dispositivo de forma arbitrria. Evite presses intensas, vibraes violentas e a imerso do dispositivo durante o transporte, armazenamento e instalao. Para o transporte, necessria a embalagem completa. Utilize a embalagem de fbrica ou equivalente para efetuar o transporte. Bateria Uma bateria fraca afeta a operao do RTC, fazendo com que este reinicie sempre que ligado. Quando a bateria tiver de ser substituda, surgir uma mensagem de registo no relatrio do servidor do produto. Para mais informaes sore o relatrio do servidor, consulte as pginas de configurao do produto ou contacte a Dahua para obter assistncia. AVISO Risco de exploso se a bateria no for corretamente colocada. Substitua apenas por uma bateria idntica ou por uma bateria recomendada pela Dahua. Elimine as baterias usadas de acordo com os regulamentos locais ou com as instrues do fabricante da bateria.
1 2 | Label | ID Label/Location Info | 680.77 KiB | October 18 2021 |
RemarkIts hard to put FCC statement on the product due to devices irregular appearance. FCC statement will be placed in the user manual which the device is marketed. RemarkIts hard to put FCC statement on the product due to devices irregular appearance. FCC statement will be placed in the user manual which the device is marketed.
1 2 | Applicant Declaration Letter | Cover Letter(s) | 676.80 KiB | October 18 2021 |
SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Zhejiang Dahua Vision Technology Co., Ltd Address Grantee Code FCC ID No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. 310053 China SVN SVN-ASI22H-DW Authorized Contact Name Yolanda chen Contact Email Contact Phone chen_yunhuan@dahuatech.com 0571-28822025 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;
a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:
(1)
(2)
(3) labeling the equipment with the exact FCC ID as specified in this application, compliance statement labeling pursuant to the applicable rules, compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.
(1)
(2)
(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Date:2021/06/14 Applicant Signature:
Print Name:
Yolanda chen Title:
Certified manager
*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0
1 2 | Auth letter | Cover Letter(s) | 514.76 KiB | October 18 2021 |
Zhejiang Dahua Vision Technology Co., Ltd TO:
Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: SVN-ASI22H-DW To whom it may concern:
Date: 2021-06-14 We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Zhejiang Dahua Vision Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed):Yolanda chen Title: Certified manager Signature:
On behalf of Company:Zhejiang Dahua Vision Technology Co., Ltd Telephone: 0571-28822025
1 2 | Confidentiality FCC | Cover Letter(s) | 423.71 KiB | October 18 2021 |
Zhejiang Dahua Vision Technology Co., Ltd To:
SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Zhejiang Dahua Vision Technology Co., Ltd No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. 310053 China Regarding:
Confidentiality Request regarding application for FCC ID: SVN-ASI22H-DW LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:
Printed Name (on file with the FCC associated with the Grantee Code): Yolanda chen Title: Certified manager Company Name: Zhejiang Dahua Vision Technology Co., Ltd
1 2 | MCL | Cover Letter(s) | 814.85 KiB | October 18 2021 |
Zhejiang Dahua Vision Technology Co., Ltd Current Date : 2021-06 - 1 4 To:
SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products
*WE (Zhejiang Dahua Vision Technology Co., Ltd ) HEREBY DECLARED THAT Product Description Access Standalone Model No. ASI2212H-W;DH-ASI2212H-W;DHI-ASI2212H-DW;
DHI-ASI2212H-W;ASI2201H-W;DH-ASI2201H-W;
DHI-ASI2201H-DW;DHI-ASI2201H-W Manufacturers Name Zhejiang Dahua Vision Technology Co., Ltd Manufacturers Address No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. 310053 China
*Except that the model number and with or without fingerprint module deviation, are identical with the original product as follows:
Note1: ASI2201H-DW is without fingerprint module ,ASI2212H-DW is with fingerprint module. Note2: The definition of identical should be electrically identical. A device will be considered to be electrically identical if no changes are made to the devices schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. Model No. ():
ASI2212H-DW, ASI2201H-DW Manufacturers Name ():
Zhejiang Dahua Vision Technology Co., Ltd Manufacturers Address): No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. 310053 China Sincerely, Signature ():
Printed Name ():
Yolanda chen Position/Title ():
Certified manager Contact Number ():
0571-28822025
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2021-10-18 | 2422 ~ 2452 | DTS - Digital Transmission System | Original Equipment |
2 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2021-10-18
|
||||
1 2 | Applicant's complete, legal business name |
Zhejiang Dahua Vision Technology Co., Ltd
|
||||
1 2 | FCC Registration Number (FRN) |
0028432326
|
||||
1 2 | Physical Address |
No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China
|
||||
1 2 |
No.1199, Bin'an Road, Binjiang District, Hangzhou
|
|||||
1 2 |
Hangzhou, N/A
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
U******@SGS.COM
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
SVN
|
||||
1 2 | Equipment Product Code |
ASI22H-DW
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
Y****** c****
|
||||
1 2 | Telephone Number |
0571-********
|
||||
1 2 | Fax Number |
0571-********
|
||||
1 2 |
c******@dahuatech.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 2 | Name |
P******** Z******
|
||||
1 2 | Physical Address |
588 West Jindu Road, Xinqiao, Songjiang
|
||||
1 2 |
ShangHai, 201612
|
|||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
+8621********
|
||||
1 2 | Fax Number |
02161********
|
||||
1 2 |
P******@sgs.com
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 2 | Name |
P****** Z****
|
||||
1 2 | Physical Address |
588 West Jindu Road, Xinqiao, Songjiang
|
||||
1 2 |
ShangHai, 201612
|
|||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
+8621********
|
||||
1 2 | Fax Number |
02161********
|
||||
1 2 |
P******@sgs.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | DXX - Part 15 Low Power Communication Device Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Access Standalone | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40MHz bandwidth mode. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Compliance Certification Services (Kunshan) Inc.
|
||||
1 2 | Name |
J******** C******
|
||||
1 2 | Telephone Number |
+ 86-******** Extension:
|
||||
1 2 |
J******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412 | 2462 | 0.108 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC | 2422 | 2452 | 0.087 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 13.56000000 | 13.56000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC