FCC ID: SVNDH-IPC-TX6E CONSUMER CAMERA

1.2.51.32.15210-001 Legal and Regulatory Information Legal Considerations Video surveillance can be regulated by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes. Disclaimer Every care has been taken in the preparation of this document. Please inform your nearest Dahua office of any inaccuracies or omissions. Dahua Technol ogy shall not be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Dahua Technology makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Dahua Technology shall not be liable or responsible for Incidental or consequential damages in connection with the furnishing, erformance or use of this material. This product is only to be used for i Intended purpose. Intellectual Property Rights Dahua Technology fetains all intellectual property rights relating to technology embodied in the product described in this document. Equipment Modifications This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user-serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals. Trademark Acknowledgments ates oe HOCVI TOL are registered trademarks or trademark applications of Dahua Technology in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. Regulatory Information European Directives Compliance 01 If the power supply to the product is from external power adaptor without connecting to AC Mains, and the product is not shipped with power adaptor, customers are required to use the external power adaptor that must fulfill the requirements for Safety Extra Low Voltage (SELV) and Limited Power Source (LPS). Waste Electrical and Electronic Equipment (WEEE) statements Disposal and Recycling When this product has reached the end of its useful life, dispose of it according to local laws and regulations. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. In accordance with local legislation, penalties may be applicable for incorrect disposal of this waste. ny

=== This symbol means that the product shall not be disposed of together with household or commercial waste. Directive 2012/19/EU on waste electrical and electronic equipment (WEEE) is applicable in the European Union member states. fo prevent otential harm to human health and the environment, the product must be disposed of in an approved and environmentally safe recycling process. For information about your nearest designated collection point, contact your local authority responsible for waste disposal. Businesses should contact the product supplier for information about how to dispose of this product correctly. Privacy Protection Notice As the device user or data controller, you might collect personal data of others such as face, fingerprints, car plate number, Email address, phone number, GPS and so on. You need to be in compliance with the local privacy protection laws and regulations to protect the legitimate rights and interests of other people by implementing measures, including but not limited to: providing clear and visible identification to inform ga ia subject the existence of surveillance area and providing related contact. About the Manual e The manual is for reference only. If there is inconsistency between the manual and the actual product, the actual product shall prevail. We are not liable for any loss caused by the operations that do not comply with the manual. e The manual would be updated according to the latest laws and regulations of related isis lictions. For detailed information, refer to the aper manual, CD-ROM, QR code or our official website. If there is Inconsistency between paper manual and the electronic version, the electronic version shall prevail. ; | ;

All the designs and software are subject to change without prior written notice. The product updates might cause some differences between the actual product and the manual. Please contact the customer service for the latest program and supplementary documentation. e There still might be deviation in technical data, functions and operations description, or errors in print. If there is any doubt or dispute, 05 C This product complies with the applicable CE marking directives and standards:

e Low Voltage (LVD) Directive 2014/35/EU. e Electromagnetic Compatibility (EMC) Directive 2014/30/EU. e Restrictions of Hazardous Substances (RoHS) Directive 2011/65/EU and its amending Directive (EU) 2015/863. A copy of the original declaration of conformity may be obtained from Dahua Technology. The most up to date copy of the signed EU Declaration of Conformity (DoC) can be downloaded from: www.dahuasecurity.com/support/notice/

CE-Electromagnetic Compatibility (EMC) This digital equipment is compliant with Class B according to EN 55032. CE-Safety This product complies with IEC/EN/UL 60950-1 or IEC/EN/UL 62368-1, Safety of Information Technology Equipment. Declaration of Conformity CE

(Only for the product has RF function) Hereby, Dahua Technology declares that the radio equipment is compliant with Radio Equipment Directive (RED) 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

www.dahuasecurity.com/support/notice/

USA Regulatory Compliance Fcc This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. Attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a 02 we reserve the right of final explanation. e Upgrade the reader software or try other mainstream reader software if the manual (in PDF format) cannot be opened. All trademarks, registered trademarks and the company names in the manual are the properties of their respective owners. Please visit our website, contact the supplier or customer service if there is any problem occurring when using the device. e If there is any uncertainty or controversy, we reserve the right of final explanation. Support Should you require any technical assistance, please contact your Dahua distributor. If your questions cannot be answered immediately, your distributor will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:

Download user documentation and software updates. Search by product, category, or phrase. e Report problems to Dahua support staff by logging in to your private support area. e Chat with Dahua support staff. Visit Dahua Support at www.dahuasecurity.com/support. Contact Information ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Address: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Postcode: 310053 Tel: +86-571-87688883 Fax: +86-571-87688815 Email: overseas@dahuatech.com Website: www.dahuasecurity.com English Important Safeguards and Warnings This Chapter describes the contents covering proper handling of the device, hazard prevention, and prevention of property damage. Read these contents carefully before using the device, comply with them when using, and keep it well for future reference. Safety Instructions The following categorized signal words with defined meaning might appear in the manual. 06 particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

e Reorient or relocate the receiving antenna. e Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. e Consult the dealer or an experienced radio/TV technician for help. FCC SDOC Statement can be downloaded from:

https://us.dahuasecurity.com/support/notices/

RF exposure warning

(Only for the product has RF communication function) This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Canada Regulatory Compliance ICES-003 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme 4 la norme NMB-003 du Canada. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. RF exposure warning 03 Signal Words Meaning AN Indicates a high potential hazard which, if not DANGER Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury. Indicates a potential risk which, if not avoided, could result in property damage, data loss, lower performance, or unpredictable result. Provides methods to help you solve a problem or avoided, will result in death or serious injury. A WARNING AN ness

(Only for the product has RF communication function) This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. Cet quipement doit tre install et utilis 4 une distance minimale de 20 cm entre le radiateur et votre corps. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment a la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour |'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique a I'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas lintensit ncessaire a |'tablissement d'une communication satisfaisante. Japan Regulatory Compliance vccl These products comply with the requirements of VCCI Class B Information Technology Equipment. Batteries Correct disposal of batteries in this product Ok, This marking on the battery indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in Directive 2006/66/EC and its amending Directive 2013/56/EU. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. f\caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Safety The product complies with IEC/EN/UL 60950-1, Information Technology Equipment Safety Part 1: General Requirements; or complies with IEC/EN/UL 62368-1, Audio/video, information and communication technology equipment Part 1: Safety requirements. 04 manufacturer's instructions. Frangais Prcautions et avertissements importants Le contenu de ce chapitre aborde la bonne manipulation de l'appareil, la prvention des risques et la prvention des dommages matriels. Lisez ce contenu soigneusement avant dutiliser lap areil, respectez-le lorsque vous l'utilisez, et conservez-le pour vous y rferer ultrieurement. Prcautions demploi a Tre save you time 7 7 = Les mentions davertissement catgorises suivantes ayant un sens dfini qo Provides additional information as the emphasis sont susceptibles dapparaitre dans le manuel. A and to the text. @

Safety Requirement e Abide by local electrical safety standards to ensure that the voltage is stable and complies with the power supply requirement of the device. e Transport, use, and store the device under the allowed humidity and temperature conditions. Refer to the corresponding technical specifications of device for specific working temperature and humidity. Do not place the device in a location exposed to dampness, dust, extreme hot or cold, strong electronic radiation, or unstable lighting condtions. e Do not install the device in a place near the heat source, such as radiator, heater, furnace, or other heat generating device to avoid fire. e Prevent liquid from flowing into the device to avoid damge to internal components. _ . 5 e _ Install the device horizontally or install on the stable place to prevent it from falling. e Install the device in a well-ventilated place, and do not block the ventilation of the device. e Donot disassemble the device arbitrarily. e Avoid heavy stress, violent vibration, and soaking during during transportation, Storage, and _ installation. Complete package is necessary during the transportation. Use the factory package or the equivalent for transportation. Battery Low battery power affects the operation of the RTC, causing it to reset at every power-up. When the battery needs replacing, a log message will appear in the product's server report. For more information about the server report, see the products setup pages or contact Dahua support. WARNING e _ Risk of explosion if the battery is incorrectly replaced. e Replace only with an identical battery or a battery which is recommended by Dahua. e Dispose of used batteries according to local regulations or the battery 07 Indique un danger a risque lev qui entrainera la mort ou des blessures graves si les instructions donnes ne sont pas respectes. Indique une situation moyennement ou fy faiblement dangereuse qui entrainera des AVERTISSEMENT | blessures faibles ou modres si les instructions donnes ne sont pas respectes. Indique une ___ situation _potentiellement dangereuse qui pourra entrainer des i dommages de la proprit, des pertes de AVERTISSEMENT | donnes, une performance moindre ou des rsultats imprvisibles, si les instructions donnes ne sont pas respectes. Fournit des instructions qui vous permettront de fy DANGER T* astuces rsoudre un problme ou de vous faire gagner du temps. Lu Fournit des informations supplmentaires pour 1. REMARQUE mettre en vidence et complter le texte. Exigences de scurit Respectez les normes de scurit lectrique locales pour vous assurer que la tension est stable et conforme aux exigences dalimentation de l'appareil. Transportez, utilisez et stockez l'appareil dans les conditions dhumidit et de temprature autorises. Consultez les spcifications techniques correspondantes de l'appareil pour connaitre la temprature et Ihumidit de fonctionnement spcifiques. e Ne placez pas l'appareil dans un lieu expos a Ihumidit, a la poussire, une chaleur ou un froid extrme, a de forts rayonnements lectroniques, ou a des conditions dclairage Inst ies. 08

Confidentiality Request regarding application for FCC ID : SVNDH-IPC-TX6E SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Hangzhou, 310052, China Zhejiang Dahua Vision Technology Co., Ltd To:

From: Zhejiang Dahua Vision Technology Co., Ltd Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:

Printed Name (on file with the FCC associated with the Grantee Code) Yolanda.chen Title: Senior Certification engineer Company Name: Zhejiang Dahua Vision Technology Co., Ltd.

Zhejiang Dahua Vision Technology Co., Ltd TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 2019-11-26 Regarding: FCC ID: SVNDH-IPC-TX6E To whom it may concern:

We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Zhejiang Dahua Vision Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Yolanda.chen Title: Senior Certification engineer Signature:

On behalf of Company: Zhejiang Dahua Vision Technology Co., Ltd. Telephone: 0571-28822025