FCC ID: SVNDH-IPC-HDW1X3 IP camera

Eyeball Network Camera Quick Start Guide ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. V1.0.0 Foreword Quick Start Guide General Safety Instructions This manual introduces the installation and operations of network camera. Read carefully before using the device, and keep the manual safe for future reference. The following signal words might appear in the manual. Signal Words Meaning Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury. Indicates a potential risk which, if not avoided, could result in property damage, data loss, lower performance, or unpredictable result. Provides additional information as a supplement to the text. Revision History Privacy Protection Notice Version V1.0.0 Revision Content First release. Release Date May 2022 As the device user or data controller, you might collect the personal data of others such as their face, fingerprints, and license plate number. You need to be in compliance with your local privacy protection laws and regulations to protect the legitimate rights and interests of other people by implementing measures which include but are not limited: Providing clear and visible identification to inform people of the existence of the surveillance area and provide required contact information. About the Manual product. The manual is for reference only. Slight differences might be found between the manual and the We are not liable for losses incurred due to operating of the product in ways that are not in compliance with the manual. The manual will be updated according to the latest laws and regulations of related jurisdictions. For detailed information, see the paper User Manual, use our CD-ROM, scan the QR code or visit our official website. The manual is for reference only. Slight differences might be found between the electronic version and the paper version. All the designs and software are subject to change without prior written notice. Product updates might result in some differences appearing between the actual product and the manual. Please contact customer service for the latest program and supplementary documentation. There might be deviations in the description of the technical data, functions and operations, or errors in the print. If there is any doubt or dispute, we reserve the right of final explanation. I Upgrade the reader software or try other mainstream reader software if the manual (in PDF Quick Start Guide All trademarks, registered trademarks and the company names in the manual are the properties Please visit our website, contact the supplier or customer service if any problems occur while format) cannot be opened. of their respective owners. using the device. If there is any uncertainty or controversy, we reserve the right of final explanation. II Important Safeguards and Warnings Quick Start Guide This section introduces content covering the proper handling of the device, hazard prevention, and prevention of property damage. Read carefully before using the device, comply with the guidelines when using it. Transportation Requirements Transport the device under allowed humidity and temperature conditions. Pack the device with packaging provided by its manufacturer or packaging of the same quality Do not place heavy stress on the device, violently vibrate or immerse it in liquid during before transporting it. transportation. Storage Requirements Store the device under allowed humidity and temperature conditions. Do not place the device in a humid, dusty, extremely hot or cold site that has strong electromagnetic radiation or unstable illumination. Do not place heavy stress on the device, violently vibrate or immerse it in liquid during storage. Installation Requirements Strictly comply with the local electrical safety codes and standards, and check whether the power supply is correct before operating the device. Please follow the electrical requirements to power the device. When selecting the power adapter, the power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no higher than PS2. Please note that the power supply requirements are subject to the device label. We recommend using the power adapter provided with the device. Do not connect the device to two or more kinds of power supplies, unless otherwise specified, to avoid damage to the device. The device must be installed in a location that only professionals can access, to avoid the risk of non-professionals becoming injured from accessing the area while the device is working. Professionals must have full knowledge of the safeguards and warnings of using the device. Do not place heavy stress on the device, violently vibrate or immerse it in liquid during installation. An emergency disconnect device must be installed during installation and wiring at a readily accessible location for emergency power cut-off. We recommend you use the device with a lightning protection device for stronger protection III against lightning. For outdoor scenarios, strictly comply with the lightning protection regulations. Ground the function earthing portion of the device to improve its reliability (certain models are not equipped with earthing holes). The device is a class I electrical appliance. Make sure that the power supply of the device is connected to a power socket with protective earthing. The dome cover is an optical component. Do not directly touch or wipe the surface of the cover Quick Start Guide during installation. Operation Requirements The cover must not be opened while the device is powered on. Do not touch the heat dissipation component of the device to avoid the risk of getting burnt. Use the device under allowed humidity and temperature conditions. Do not aim the device at strong light sources (such as lamplight, and sunlight) when focusing it, to avoid reducing the lifespan of the CMOS sensor, and causing overbrightness and flickering. When using a laser beam device, avoid exposing the device surface to laser beam radiation. Prevent liquid from flowing into the device to avoid damage to its internal components. Protect indoor devices from rain and dampness to avoid electric shocks and fires breaking out. Do not block the ventilation opening near the device to avoid heat accumulation. Protect the line cord and wires from being walked on or squeezed particularly at plugs, power sockets, and the point where they exit from the device. Do not directly touch the photosensitive CMOS. Use an air blower to clean the dust or dirt on the The dome cover is an optical component. Do not directly touch or wipe the surface of the cover lens. when using it. There might be a risk of electrostatic discharge on the dome cover. Power off the device when installing the cover after the camera finishes adjustment. Do not directly touch the cover and make sure the cover is not exposed to other equipment or human bodies Strengthen the protection of the network, device data and personal information. All necessary safety measures to ensure the network security of the device must be taken, such as using strong passwords, regularly changing your password, updating firmware to the latest version, and isolating computer networks. For the IPC firmware of some previous versions, the ONVIF password will not be automatically synchronized after the main password of the system has been changed. You need to update the firmware or change the password manually. Strictly follow the instructions to disassemble the device. Non-professionals dismantling the device can result in it leaking water or producing poor quality images. For a device that is required to be disassembled before use, make sure the seal ring is flat and in the seal groove when putting the cover back on. When you find condensed water forming on the lens or the desiccant becomes green after you disassembled the device, contact after-sales service to replace the desiccant. Desiccants might not be provided depending on the actual model. IV Maintenance Requirements Quick Start Guide Use the accessories suggested by the manufacturer. Installation and maintenance must be performed by qualified professionals. Do not directly touch the photosensitive CMOS. Use an air blower to clean the dust or dirt on the lens. When it is necessary to clean the device, slightly wet a soft cloth with alcohol, and gently wipe away the dirt. Clean the device body with a soft dry cloth. If there are any stubborn stains, clean them away with a soft cloth dipped in a neutral detergent, and then wipe the surface dry. Do not use volatile solvents such as ethyl alcohol, benzene, diluent, or abrasive detergents on the device to avoid damaging the coating and degrading the performance of the device. The dome cover is an optical component. When it is contaminated with dust, grease, or fingerprints, use degreasing cotton moistened with a little ether or a clean soft cloth dipped in water to gently wipe it clean. An air gun is useful for blowing dust away. It is normal for a camera made of stainless steel to develop rust on its surface after being used in a strong corrosive environment (such as the seaside, and chemical plants). Use an abrasive soft cloth moistened with a little acid solution (vinegar is recommended) to gently wipe it away. Afterwards, wipe it dry. V Table of Contents Quick Start Guide Foreword .........................................................................................................................................................................................................I Important Safeguards and Warnings ............................................................................................................................................. III 1 Introduction............................................................................................................................................................................................. 1 1.1 Cable ................................................................................................................................................................................................. 1 1.2 LED Status ...................................................................................................................................................................................... 1 2 Network Configuration ...................................................................................................................................................................... 2 2.1 Initializing the Camera ............................................................................................................................................................ 2 2.2 Changing the Device IP Address ........................................................................................................................................ 3 2.3 Logging in to Web Page ......................................................................................................................................................... 4 3 Operating with DMSS ......................................................................................................................................................................... 5 4 Installation ............................................................................................................................................................................................... 7 4.1 Packing List ................................................................................................................................................................................... 7 4.2 Dimensions .................................................................................................................................................................................... 7 4.3 Installing Camera ....................................................................................................................................................................... 8 4.3.1 Installation Method ........................................................................................................................................................ 8 4.3.2 Installing SD Card ............................................................................................................................................................ 8 4.3.3 Attaching Camera ........................................................................................................................................................... 8 4.3.4 (Optional) Installing Waterproof Connector .................................................................................................... 10 4.3.5 Adjusting Lens Angle .................................................................................................................................................. 11 VI 1 Introduction Quick Start Guide 1.1 Cable Waterproof all the cable joints with insulating tape and waterproof tape to avoid water damage and prevent short circuits from occurring. For details, see the FAQ manual. Figure 1-1 Cables No. Port Name Description Table 1-1 Cable information 1 Ethernet port 2 Power port Connects to the network through a network cable. Do not connect both network cable and Wi-Fi at the same time. Inputs 12 VDC power. Be sure to supply power as instructed in the manual. The device might become damaged or behave abnormally if power is not correctly supplied. 1.2 LED Status LED Status Solid green Solid red Table 1-2 LED status Device Status Working properly. Starting/Restarting. Resetting to factory default. Slowly flashing red Network disconnected. Flashing red and green Updating firmware. 1 2 Network Configuration Quick Start Guide Device initialization and IP configurations can all be managed with the ConfigTool or through the web page. For more information, see the web operation manual. device is reset. Device initialization is available on select models, and is required at first-time use and after the Device initialization is available only when the IP addresses of the device (192.168.1.108 by default) and the computer are on the same network segment. Carefully plan the network segment to connect the device to. The following figures and pages are for reference only. 2.1 Initializing the Camera Step 1 Search for the device that needs to be initialized through ConfigTool. 1. Double-click ConfigTool.exe to open the tool. 2. Click Modify IP. 3. Select the searching way, and then click OK. 4. Select one or several uninitialized cameras, and then click Initialize. Select the devices to be initialized, and then click Initialize. Step 2 If you do not provide the email address for password reset, you can reset the password only through XML file. 2 Figure 2-1 Password setting Quick Start Guide Step 3 Set and confirm the password of the devices, enter a valid email address, and then click Next. Select Auto-check for updates as needed, and then Click OK to initialize the device. to see more information. If initialization failed, click Click Finish. Step 4 Step 5 2.2 Changing the Device IP Address You can change the IP address of one or more devices at a time. This section is based on changing IP addresses in batches. Changing IP addresses in batches is available only when the corresponding devices have the same login password. Step 1 Search for the device whose IP address needs to be changed through ConfigTool. 1. Double-click ConfigTool.exe to open the tool. 2. Click Modify IP. 3. Select the searching way, enter the username and password, and then click OK. device. The username is admin, and the password is the one you set while initializing the Step 2 Select the devices whose IP addresses need to be changed, and then click Modify IP. 3 Step 3 Configure IP address. Static mode: When you select Static, you need to enter Start IP, Subnet Mask, and Gateway. The IP addresses of the devices will be modified successively starting from the first IP entered. DHCP mode: If the DHCP server is available in the network, when you select DHCP, the IP address of devices will be automatically obtained through the DHCP server. Quick Start Guide The same IP address will be set for multiple devices if you select the Same IP checkbox. Click OK. Step 4 2.3 Logging in to Web Page Step 1 Open IE browser, enter the IP address of the device in the address bar, and then press the Enter key. Step 2 If the setup wizard is displayed, finish the settings as instructed. Enter the username and password in the login box, and then click Login. The home page is displayed when the installation is finished. For the first-time login, click Click Here to Download Plugin, and then install the plugin as instructed. 4 3 Operating with DMSS Quick Start Guide Make sure that there are no obstacles and electromagnetic interference between the device and the router for best possible wireless performance. Step 1 Add the device. 1) Tap + button on the upper-right corner of the DMSS home page to scan the QR code on the camera. If your DMSS fails to scan the QR code, tap Manually enter SN. 2) Select Wireless Camera. Figure 3-1 Add the device Step 2 Configure the device hotspot. tap Next. If you connect the device with an Ethernet cable, please jump to Step4 directly. 1) Make sure that the device is connected to power and enable device hotspot, and then 2) Go to Wi-Fi settings on your mobile phone, connect hotspot named DAP-xxxxxxxx. 3) Enter the username and password for the device, and then tap Next. 5 Figure 3-2 Configure the device hotspot Quick Start Guide Step 3 Configure the Wi-Fi. Step 4 Select your Wi-Fi network from the SSID list, and then enter the password. Configure the device information. 1) Create the device name and password. 2) Set the time zone, and then click Done. Figure 3-3 Configure the device information 6 4 Installation Quick Start Guide 4.1 Packing List Tools required for installation, such as the electric drill, are not included in the package. The operation manual and information on the tools are on the disk or the QR code. Figure 4-1 Packing list 4.2 Dimensions Figure 4-2 Dimensions (mm [inch]) 7 4.3 Installing the Camera 4.3.1 Installation Methods Figure 4-3 Installation methods Quick Start Guide 4.3.2 Installing the SD Card SD card slot is available on select models. Disconnect the power before installing or removing the SD card. Press the reset button for 10 seconds to reset the device. Figure 4-4 Install the SD card 4.3.3 Attaching the Camera Make sure that the mounting surface is strong enough to hold at least three times the weight of the camera and bracket. 8 Figure 4-5 Cable going through the side cable tray Quick Start Guide Figure 4-6 Cable going through the mounting surface 9 4.3.4 (Optional) Installing the Waterproof Connector Quick Start Guide This part is needed only when a waterproof connector comes with the camera and the camera is used outdoors. Figure 4-7 Install the waterproof connector 10 4.3.5 Adjusting the Lens Angle Figure 4-8 Adjust the lens angle Quick Start Guide 11 Quick Start Guide

Label Location Remark:Its hard to put FCC statement on the product due to devices irregular appearance. FCC statement will be placed in the user manual which the device is marketed.

a) b) c) d) e) f) g) SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Zhejiang Dahua Vision Technology Co., Ltd No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Yolanda chen SVN SVNDH-IPC-HDW1X3 chen_yunhuan@dahuatech.com 0571-28822025 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date:2022-06-22 Print Name:

Title:

Yolanda chen Senior Certification engineer

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 2022-06-22 Regarding: FCC ID: SVNDH-IPC-HDW1X3 To whom it may concern:

We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. This authorization is valid until further written notice from the applicant. Name (Printed): Yolanda chen Title: Certificate Engineer Signature:

On behalf of Company: ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. Telephone: No.1199, Binan Road, Binjiang District, Hangzhou, P.R.China

No.1199, Binan Road, Binjiang District, Hangzhou, P.R.China Confidentiality Request regarding application for FCC ID: SVNDH-IPC-HDW1X3 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. To:

From: ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:

Printed Name (on file with the FCC associated with the Grantee Code): Yolanda chen Title: Certificate Engineer Company Name: ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD..

ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Current Date : 2022-06-22 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products

*WE (ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.) HEREBY DECLARED THAT Product Description IP camera Model No. IPC-HDW1230DT-SAW; DH-IPC-HDW1230DT-SAW ;

IPC-HDW1230DT-SAW-0280B;DH-IPC-HDW1230DT-SAW-0280B;IPC-HD W1230DT-SAW-0360B;DH-IPC-HDW1230DT-SAW-0360B;DH-IPC-HDW1 2B0DT-SAW;IPC-HDW12B0DT-SAW;IPC-HDW1430DT-SAW;

IPC-HDW1430DT-SAW-0280B;DH-IPC-HDW1430DT-SAW-0280B;IPC-HD W1430DT-SAW-0360B;DH-IPC-HDW1430DT-SAW-0360B;DH-IPC-HDW1 4B0DT-SAW;IPC-HDW14B0DT-SAW Manufacturers Name ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Manufacturers Address No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China

*Except that the model number, trade name,Color and appearance deviation, are identical with the original product as follows:

Note: The definition of identical should be electrically identical. A device will be considered to be electrically identical if no changes are made to the devices schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. with the model(s) below which samples we chose to be tested by SGS Model No. ():

DH-IPC-HDW1430DT-SAW Manufacturers Name ():

ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Manufacturers Address):

No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. Sincerely, Signature ():

China Printed Name ():

Yolanda.chen Position/Title ():

Senior Certification engineer Contact Number ():

0571-28822025 To: