24 GHz Radar Detector Users Manual ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. V1.0.0 V1.0.0 Foreword Users Manual This manual introduces the functions and operations of the 24 GHz radar detector (hereinafter referred to as the "Radar"). General Model DHI-ITARD-024SA-ST Safety Instructions The following categorized signal words with defined meaning might appear in the manual. Signal Words Meaning Indicates a high potential hazard which, if not avoided, will result in death or serious injury. Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury. Indicates a potential risk which, if not avoided, could result in property damage, data loss, lower performance, or unpredictable result. Provides methods to help you solve a problem or save you time. Provides additional information as the emphasis and supplement to the text. Revision History About the Manual Version Revision Content Release Time V1.0.0 First release. March 2020 The manual is for reference only. If there is inconsistency between the manual and the actual product, the actual product shall prevail. We are not liable for any loss caused by the operations that do not comply with the manual. The manual would be updated according to the latest laws and regulations of related regions. For detailed information, see the paper manual, CD-ROM, QR code or our official website. If there is inconsistency between paper manual and the electronic version, the electronic version shall prevail. All the designs and software are subject to change without prior written notice. The product I Users Manual updates might cause some differences between the actual product and the manual. Please contact the customer service for the latest program and supplementary documentation. There still might be deviation in technical data, functions and operations description, or errors in print. If there is any doubt or dispute, please refer to our final explanation. Upgrade the reader software or try other mainstream reader software if the manual (in PDF All trademarks, registered trademarks and the company names in the manual are the format) cannot be opened. properties of their respective owners. Please visit our website, contact the supplier or customer service if there is any problem occurred when using the device. If there is any uncertainty or controversy, please refer to our final explanation. II Important Safeguards and Warnings Users Manual This chapter introduces the contents covering proper handling of the Radar, hazard prevention, and prevention of property damage. Read these contents carefully before using the Radar, comply with them when using, and keep the manual well for future reference. Pay attention to personnel safety when installing the Radar at intersections or certain road sections. Non-professionals are forbidden to disassemble and install the Radar. Before powering on the Radar, check all the power connections to prevent short circuit. Properly ground the Radar. Securely install the Radar to reduce the impact of vibration on the Radar. The cables must meet the requirements of shielding, insulation, and moisture resistance. Power Source Requirements Use high-quality DC power supply that meets the voltage requirements to avoid crosstalk from other devices. Strictly comply with the local electric safety standards. Make sure that the power supply is correct before operating the Radar. Use power supply that meets SELV (safety extra low voltage) requirements, and supply power with rated voltage that conforms to Limited Power Source in IEC60950-1. For specific power supply requirements, please refer to device labels. Install easy-to-use device for power off before installing cables, which is for emergent power off when necessary. Prevent the line cord from being trampled or pressed, especially the plug, power socket and the junction. Application Environment Requirements Make sure that there are no obstructions in the front of the Radar. Do not hot swap the serial port. Do not impact the Radar. Prevent the Radar from falling down. Do not aim the Radar at strong light (such as lamplight, sunlight) for focusing. Transport, use and store the Radar under the allowed humidity and temperature conditions. Prevent any liquid from flowing into the Radar. Do not block the ventilation near the Radar. Do not press, vibrate or soak the Radar during transportation, storage and installation. Pack the Radar with packaging materials provided by its manufacturer or materials with the same quality before transporting it. III Maintenance Requirements Users Manual WARNING professionals. Use accessories suggested by the manufacturer, and install and maintain the Radar by Do not provide two or more power supply modes; otherwise, the Radar might be damaged. IV Users Manual Table of Contents 1.1 1.2 Foreword .................................................................................................................................................... I Important Safeguards and Warnings .................................................................................................... III 1 Product Introduction ............................................................................................................................. 1 Overview ....................................................................................................................................... 1 Features ........................................................................................................................................ 1 2 Device Structure .................................................................................................................................... 2 Dimensions ................................................................................................................................... 2 Structure ........................................................................................................................................ 2 Cable ............................................................................................................................................. 4 3 Installation .............................................................................................................................................. 5 Fixing the Radar to Brackets ........................................................................................................ 5 Installing the Radar above Lane ................................................................................................... 6 4 Radar Configuration on Camera Web ................................................................................................. 8 5 FAQ ....................................................................................................................................................... 10 Appendix 1 Cybersecurity Recommendations ................................................................................... 11 2.1 2.2 2.3 3.1 3.2 V 1 Product Introduction Users Manual The 24 GHz radar detector is a narrow beam radar with planar antenna system. It is specifically designed to detect moving vehicles to meet modern traffic management challenges. The product uses modern microwave radar technology and high-speed digital signal processing technology for precise positioning and accurate speed measurement. The Radar can be applied to a wide range of complex road environments such as tunnel entrance and highway interchanges, providing real-time traffic information and forensic evidence for traffic speed violations. 1.1 Overview 1.2 Features Adopts 24 GHz MMIC technology, light-weighted and efficient. High-precision capture at fixed position. Position error within 1 m (3.28 ft). High-gain and low-sidelobe microstrip antenna design helps effectively avoid echo interference of adjacent lanes. Fast response ensures high capture rate and real-time signal processing. Advanced radar signal processing and real-time data processing technologies. Adopts new algorithm for enhanced location stability and prolonged work sustainability. Ideal for flexible and extensive applications. Low microwave radiation and power consumption, long service life, and high stability and reliability. 1 2 Device Structure Users Manual 2.1 Dimensions Figure 2-1 Front view (mm (inch)) Figure 2-2 Side view (mm (inch)) 2.2 Structure The device structure relates to the Radar and the bracket. See Figure 2-3 and Figure 2-4. 2 Figure 2-3 Radar structure Users Manual No. Description No. Description Table 2-1 Radar structure Antenna Sealing washer Front cover 1 2 3 4 5 6 Set screw PG connector Rear cover Figure 2-4 Bracket structure Table 2-2 Bracket structure No. Description 1 Bracket 1 No. Description 2 Bracket 2 3 2.3 Cable Figure 2-5 Cable Users Manual Table 2-3 Description of 6-pin 2.5mm pitch connector Pin Name Description 12V DC (black) GND pin for radar power supply. 12V DC (red) Pin for 12V radar power supply. TXD (green) RXD (yellow) GND (brown) TX pin for radar RS-232 communication, baud rate 9600, connects to R1, R2 and R3 ports of camera. RX pin for radar RS-232 communication, connects to T1, T2 and T3 ports of camera. GND pin for radar RS-232 communication, connects to GND port of camera. Reserved Reserved. 1 2 3 4 5 6 4 3 Installation Users Manual 3.1 Fixing the Radar to Brackets The brackets help fix the Radar and adjust the angle of the Radar. Step 1 Fix bracket 1 to the Radar with four M6 8 hex socket cap screws. Figure 3-1 Fix bracket 1 Step 2 Fix bracket 2 to bracket 1 with four M6 20 flat spring screws. Figure 3-2 Fix bracket 2 5 3.2 Installing the Radar over Lane Users Manual You can use tools to improve your installation, such as digital protractor, portable inclinometer, and more. Step 1 Install the Radar on traffic pole right above the lane. Figure 3-3 Install the Radar on traffic pole Step 2 Adjust the Radar position to make it aim at the middle position of the detected lane. Figure 3-4 Adjust Radar position Step 3 Adjust the installation height, elevation angle (the angle between the normal line of the radar front cover and the horizontal line), and capture distance of the Radar according to your needs. Recommended installation: Height: 6 m (19.7 ft), elevation angle: 13, and capture distance: 24 m (78.7 ft). When adjusting the Radar elevation angle, keep the Radar as horizontal as possible. You can use mobile app for measuring angle to help you adjust the elevation angle. 6 Figure 3-5 Radar installation example Users Manual 7 4 Radar Configuration on Camera Web Users Manual Install the Radar (see "3 Installation"), connect the Radar to camera (see "2.3 Cable"), and then set the radar parameters on the web interface of camera, so the Radar can work with the camera to detect and capture vehicles. Step 1 Open the browser, enter the IP address of the camera in the address bar, and then Step 2 Enter the username and password, and click Login to log in to the web interface of press the Enter key. the camera. Step 3 Select Setup > ITC > Intelligent > Radar. Figure 4-1 Radar Select Enable Radar to enable radar detection, and then you can configure the Step 4 parameters. COM SET COM Port Radar Type ITARD-024SA-ST This section takes ITARD-024SA-ST radar as an example. The interface is for reference only, and the actual interface shall prevail. Table 4-1 Radar description Parameter Description Select the corresponding COM port. COM1/2/3 corresponds to Lane1/2/3 respectively. Select according to the actual lane that the Radar detects. Select the radar type according to the actually-connected radar. Parameters of the selected radar need to be configured at the right side of the interface. 8 Users Manual Parameter Description Work Mode The way of sending information captured by the Radar. You can select Single, Continuous or Manual. Currently, camera supports only Single. Special program is required if you want to send the information in continuous or manual way. Interval The interval that the Radar detects and recognizes an object. Detect Mode Angle Sensitivity The detection direction of the Radar, which includes Approaching, Departing, and Both. Select according to the actual installation status of the Radar. The elevation angle, means the the angle between the normal line of the radar front cover and the horizontal line. Properly adjust the angle to get best detection result. You can select the capture sensitivity of the Radar. The larger the value, the more sensitive the Radar. Trigger Speed Capture will be triggered when the vehicle speed reaches the defined trigger speed. Radar No. The No. that defines the Radar. Trigger Distance Height The distance that triggers capture. Enter the value according to the actual trigger distance of the Radar. Installation height of the Radar. Enter the height according to the actual installation height of the Radar. Pre Speed Wait The two parameters help get the vehicle speed. By video detection or Delay Speed Wait radar, the camera can detect the vehicle speed. If vehicle speed is detected within the range of Pre Speed Wait and Delay Speed Wait, then such speed will be the vehicle speed recognized by the Camera; if out of such range, then the speed will be a random value within speed limit. Step 5 Click Confirm. 9 5 FAQ Users Manual The Radar is a high-technology product that requires professional operations. Read the user's manual carefully before using the Radar, or contact professionals or technical support if you have any doubts. This section provides guidance on solving some typical problems related to the Radar. Problem Solutions Table 5-1 FAQ The Radar does not work after being powered on Check power connection and voltage Check whether the positive and negative electrodes of power module are correctly connected Check communication cable connection Check the data receive interface Check the serial port settings of the program Check communication cable connection Check electromagnetic compatibility (EMC) and electromagnetic Messy code interference (EMI) Check baud rate settings Check the elevation angle of the Radar. Make sure that the area The Radar does not detect vehicle speed to be detected is fully covered by the radar beam Check whether the elevation angle of the Radar is reasonable Check whether the sensitivity is set too low The Radar detects vehicle speed but does not capture vehicles Missed capture After I connect the Radar to the camera, the camera does not capture targets Check whether there is strong electromagnetic interference and rotating object Check the installation angle of the Radar, and check whether there is interference from adjacent lane Check whether the sensitivity is set too high Check the elevation angle of the Radar. Make sure that the area to be detected is fully covered by the radar beam Check whether the capture distance is reasonable Check whether the sensitivity is set too low Check communication cable connection Check whether the radar protocol matches with the camera protocol Check serial port and baud rate settings of the camera Check whether vehicle capture is enabled on the camera Check whether radar settings on the camera web interface are correct. These settings include radar work mode, detection direction, angle, and sensitivity 10 Appendix 1 Cybersecurity Recommendations Users Manual Cybersecurity is more than just a buzzword: its something that pertains to every device that is connected to the internet. IP video surveillance is not immune to cyber risks, but taking basic steps toward protecting and strengthening networks and networked appliances will make them less susceptible to attacks. Below are some tips and recommendations on how to create a more secured security system. Mandatory actions to be taken for basic equipment network security:
1. Use Strong Passwords Please refer to the following suggestions to set passwords:
The length should not be less than 8 characters;
Include at least two types of characters; character types include upper and lower case letters, numbers and symbols;
Do not contain the account name or the account name in reverse order;
Do not use continuous characters, such as 123, abc, etc.;
Do not use overlapped characters, such as 111, aaa, etc.;
2. Update Firmware and Client Software in Time According to the standard procedure in Tech-industry, we recommend to keep your equipment (such as NVR, DVR, IP camera, etc.) firmware up-to-date to ensure the system is equipped with the latest security patches and fixes. When the equipment is connected to the public network, it is recommended to enable the "auto-check for updates" function to obtain timely information of firmware updates released by the manufacturer. We suggest that you download and use the latest version of client software.
"Nice to have" recommendations to improve your equipment network security:
1. Physical Protection We suggest that you perform physical protection to equipment, especially storage devices. For example, place the equipment in a special computer room and cabinet, and implement well-done access control permission and key management to prevent unauthorized personnel from carrying out physical contacts such as damaging hardware, unauthorized connection of removable equipment (such as USB flash disk, serial port), etc. 2. Change Passwords Regularly We suggest that you change passwords regularly to reduce the risk of being guessed or cracked. 3. Set and Update Passwords Reset Information Timely The equipment supports password reset function. Please set up related information for password reset in time, including the end users mailbox and password protection questions. If the information changes, please modify it in time. When setting password protection questions, it is suggested not to use those that can be easily guessed. 4. Enable Account Lock The account lock feature is enabled by default, and we recommend you to keep it on to guarantee the account security. If an attacker attempts to log in with the wrong password several times, the corresponding account and the source IP address will be locked. 11 Users Manual 5. Change Default HTTP and Other Service Ports We suggest you to change default HTTP and other service ports into any set of numbers between 1024~65535, reducing the risk of outsiders being able to guess which ports you are using. 6. Enable HTTPS 7. Enable Whitelist We suggest you to enable HTTPS, so that you visit Web service through a secure communication channel. We suggest you to enable whitelist function to prevent everyone, except those with specified IP addresses, from accessing the system. Therefore, please be sure to add your computers IP address and the accompanying equipments IP address to the whitelist. 8. MAC Address Binding We recommend you to bind the IP and MAC address of the gateway to the equipment, thus reducing the risk of ARP spoofing. 9. Assign Accounts and Privileges Reasonably According to business and management requirements, reasonably add users and assign a minimum set of permissions to them. 10. Disable Unnecessary Services and Choose Secure Modes If not needed, it is recommended to turn off some services such as SNMP, SMTP, UPnP, etc., to reduce risks. If necessary, it is highly recommended that you use safe modes, including but not limited to the following services:
SNMP: Choose SNMP v3, and set up strong encryption passwords and authentication passwords. SMTP: Choose TLS to access mailbox server. FTP: Choose SFTP, and set up strong passwords. AP hotspot: Choose WPA2-PSK encryption mode, and set up strong passwords. 11. Audio and Video Encrypted Transmission If your audio and video data contents are very important or sensitive, we recommend that you use encrypted transmission function, to reduce the risk of audio and video data being stolen during transmission. Reminder: encrypted transmission will cause some loss in transmission efficiency. 12. Secure Auditing Check online users: we suggest that you check online users regularly to see if the device is logged in without authorization. Check equipment log: By viewing the logs, you can know the IP addresses that were used to log in to your devices and their key operations. 13. Network Log Due to the limited storage capacity of the equipment, the stored log is limited. If you need to save the log for a long time, it is recommended that you enable the network log function to ensure that the critical logs are synchronized to the network log server for tracing. 14. Construct a Safe Network Environment In order to better ensure the safety of equipment and reduce potential cyber risks, we recommend:
Disable the port mapping function of the router to avoid direct access to the intranet devices from external network. 12 Users Manual The network should be partitioned and isolated according to the actual network needs. If there are no communication requirements between two sub networks, it is suggested to use VLAN, network GAP and other technologies to partition the network, so as to achieve the network isolation effect. Establish the 802.1x access authentication system to reduce the risk of unauthorized access to private networks. It is recommended that you enable your device's firewall or blacklist and whitelist feature to reduce the risk that your device might be attacked. 13 Users Manual Federal Communications Commission (FCC) Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.