all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Installation Manual | Users Manual | 638.85 KiB | ||||
1 2 |
|
Operation Manual | Users Manual | 5.46 MiB | ||||
1 2 |
|
User Manual | Users Manual | 1.21 MiB | May 25 2019 | |||
1 2 |
|
Users Manual | Users Manual | 491.59 KiB | May 25 2019 | |||
1 2 | Cover Letter(s) | May 25 2019 | ||||||
1 2 | Block Diagram | Block Diagram | May 25 2019 | confidential | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | May 25 2019 | ||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | May 25 2019 | ||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Internal Photos | May 25 2019 | ||||||
1 2 | ID Label/Location Info | May 25 2019 | ||||||
1 2 | RF Exposure Info | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Opeartional Description | Operational Description | May 25 2019 | confidential | ||||
1 2 | RF Exposure Info | May 25 2019 | ||||||
1 2 | Schematics | Schematics | May 25 2019 | confidential | ||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | May 25 2019 | ||||||
1 2 | Test Report | May 25 2019 |
1 2 | Installation Manual | Users Manual | 638.85 KiB |
Dahua 2 Inch PTZ Dome Camera Installation Manual Dahua 2 Inch PTZ Dome Camera Installation Manual Zhejiang Dahua Vision Technology CO., LTD Version 1.0.0 Dahua 2 Inch PTZ Dome Camera Installation Manual Table of Contents 1 INTELLIGENT SPEED DOME INSTALLATION .................................................. 1 1.1 Installation Environments ..................................................................................................................... 1 1.2 Check installation space and installation location intension ........................................................... 1 1.3 Please keep all package material well for future use ....................................................................... 1 2 SETUP BEFORE INSTALLATION ...................................................................... 2 2.1 Check Accessories ................................................................................................................................ 2 2.2 Open Device ........................................................................................................................................... 2 2.3 Installation Position Map ....................................................................................................................... 2 2.4 SD Card Slot and Rest Button ............................................................................................................. 3 3 CAMERA INSTALLATION .................................................................................. 4 3.1 Component Installation ......................................................................................................................... 4 3.2 Installation Steps ................................................................................................................................... 5 3.2.1 3.2.2 Installation Environments ................................................................................................................. 5 Installation Steps ............................................................................................................................... 5 4 APPENDIX LIGHTENING PROTECTION AND SURGE PROTECTION .......... 7 i Dahua 2 Inch PTZ Dome Camera Installation Manual 5 APPENDIX 12V DC WIRE GAUGE AND TRANSMISSION DISTANCE RELATIONSHIP SHEET ............................................................................................ 8 6 APPENDIX WIRE GAUGE REFERENCE SHEET .......................................... 9 ii Dahua 2 Inch PTZ Dome Camera Installation Manual Welcome Thank you for purchasing our speed dome!
Please read the following safeguards and warnings carefully before you install or use the product!
iii Dahua 2 Inch PTZ Dome Camera Installation Manual Important Safeguards and Warnings Safety Measures 1. Qualified Engineer Needed The installation engineer or maintenance engineer shall have corresponding CCTV system installation certificate or maintenance qualification certificate. The installation engineer or maintenance engineer shall have qualification certificate for work at height. The installation engineer or maintenance engineer shall have the basic knowledge and operation technique for low-voltage cable layout and low-voltage electronic cable connection. Please read the installation manual carefully and keep it well for future reference, We are not liable for any problems caused by unauthorized modifications or attempted repair. 2. Lifting Appliance Requirement Please select the proper speed dome installation mode and use the lifting appliances at the safety environment. The lifting appliances shall have the enough capacity to reach the installation height. The lifting appliances shall have safe performance. The precaution measures include two types: Warning and Note. Warning: It is to alert you there is an optional risk of death or series injury!
Note: It is to alert you there is an optional risk of damage or property loss!
Warning 1. All installation and operation here should conform to your local electrical safety codes. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation. 2. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the rated voltage power supply of Limited power source according to the IEC60950-1, the exact power supply requirement is subject to the device label. 3. Be sure to use all the accessories (such as power adapter) recommended by manufacturer. 4. Do not connect several speed domes to one power adapter. It may result in overheat or fire if it exceeds the rated load. iv Dahua 2 Inch PTZ Dome Camera Installation Manual 5. Avoid aiming the lens at the strong radiation source directly (such as sun, laser, molten steel etc); in case it may cause unrecoverable damage to the thermal imaging detector. Whats worse, it may cause severe damage to the detector. 6. Avoid oil stain and kinds of chemicals tarnishing and damaging the lens surface. 7. Store the device in a cool and dry place where there is ventilation but no intense electromagnetic field. 8. Violent vibration or crash is not allowed during transportation and application. 9. Before you connect the cable, install or uninstall, or begin the daily maintenance work, please turn off the power and unplug the power cable. 10. Please make sure the produce is secure firmly on the wall or the ceiling. 11. Please turn off the power and unplug the power cable, If there is any smoke, disgusting smell, or noise. Please contact your local retailer or customer service centre for help. 12. All the examination and repair work should be done by the qualified service engineers. We are not liable for any problems caused by unauthorized modifications or attempted repair. Note 1. Safety Transportation Heavy stress, violent vibration or water splash are not allowed during transportation, storage and installation. This series product must use split type package during the transportation. We are not liable for any damage or problem resulting from the integrated package during the transportation. 2. When device is malfunction Shut down the device and disconnect the power cable immediately if there is smoke, abnormal smell or abnormal function. Please contact your local retailer ASAP. 3. Do not try to dismantle or modify the device There is risk of personal injury or device damage resulting from opening the shell. Please contact your local retailer if there is internal setup or maintenance requirement. We are not liable for any problems caused by unauthorized modifications or attempted repair. 4. Do not allow other object falling into the device Please make sure there is no metal or inflammable, explosive substance in the speed dome. The above mentioned objects in the device may result in fire, short-circuit or damage. Please shut down the device and disconnect the power cable if there is water or liquid falling into the camera. Please contact your local retailer ASAP. Please pay attention to the camera. Avoid the sea water or rain to erode the camera. 5. Handle carefully Do not allow this series product fall down to the ground. Avoid heavy vibration. v Dahua 2 Inch PTZ Dome Camera Installation Manual 6. Installation Environment Requirement This series speed dome should be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances and etc. This series product shall be away from the strong electromagnetism radiant, please keep it away from wireless power, TV transmitter, transformer and etc. 7. Daily Maintenance Please use the soft cloth to clean dust on the shell, or you can use soft cloth with cleaning liquid to clean the shell and then use soft cloth to make it dry. Do not use gasoline, dope thinner or other chemical material to clean the shell. It may result in shell transfiguration or paint flake. Do not allow the plastic or rubber material to touch the shell for a long time. It may result in paint flake. vi Dahua 2 Inch PTZ Dome Camera Installation Manual 1 INTELLIGENT SPEED DOME INSTALLATION 1.1 Installation Environments Basic Requirement All installation and operation here should conform to your local electrical safety codes. Before installation, please open the package and check all the components are included. Please make sure the speed dome installation environment and installation mode can meet your requirement. If there is special requirement, please contact your local retailer for more information. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation. 1.2 Check installation space and installation location intension Please make sure the installation environment has enough space to install the speed dome and its corresponding bracket. Please make sure the ceiling, wall and the bracket can support the speed dome and its corresponding installation component. It shall sustain the 8X weight of the speed dome. 1.3 Please keep all package material well for future use Please keep speed dome package material well in case you need to send it back to your local retailer or manufacturer for maintenance work. Non-original package material may result in device damage during the transportation. 1 Dahua 2 Inch PTZ Dome Camera Installation Manual 2 SETUP BEFORE INSTALLATION 2.1 Check Accessories Before the installation, please check the accessories one by one according to the packing list. Please make sure all the components listed are included. (Please check the container list for details.) 2.2 Open Device Remove the package and then take out the device. See Figure 2-1. Figure 2-1 2.3 Installation Position Map The installation position map is used for drilling holes and positioning on the hard ceiling and cable outlet position. See Figure 2-2. Figure 2-2 2 Dahua 2 Inch PTZ Dome Camera Installation Manual 2.4 SD Card Slot and Rest Button SD card slot and button is shown in Figure 2-3. Please make sure the SD card is in the non read-write state when removing it. Otherwise, it may result in data loss and SD card damage. The Reset button is used for restoring default setting. Long press Reset button for more than 5 seconds, the system configuration information will be recovered to default setting. Figure 2-3 3 Dahua 2 Inch PTZ Dome Camera Installation Manual 3 CAMERA INSTALLATION 2-inch wifi network speed dome mainly adopts ceiling mount mode, which can be installed on the ceiling or wall. 3.1 Component Installation The installation of WIFI antenna is shown in Figure 3-1. Figure 3-1 The ceiling mount speed dome is shown in Figure 3-3. Figure 3-2 4 Dahua 2 Inch PTZ Dome Camera Installation Manual Figure 3-3 3.2 Installation Steps 3.2.1 Installation Environments The ceiling mount speed dome can be installed in the hard construction ceiling in the indoor environment. Before the installation, please make sure:
The ceiling is thick enough to install the expansion bolt. The ceiling can at least sustain the 8x weight of the speed dome. 3.2.2 Installation Steps 3.2.2.1 WIFI Antenna Installation Step 1 Align the thread end of WIFI antenna to the port stud on the pedestal of the speed dome, and rotate it according to the direction shown in the Figure 3-1 until the antenna is firmly installed. Step 2 It can adjust the direction of WIFI antenna according to requirement after the WIFI antenna is firmly fixed on the WIFI port of the rear panel. 3.2.2.2 Speed Dome Installation Note: There are two cable outlet modes for ceiling mount installation. Dont drill hole on the ceiling, and open wire outlet from the side of the speed dome. Drill hole on the ceiling, and concealed wire outlet from the ceiling. 5 Dahua 2 Inch PTZ Dome Camera Installation Manual Step 1 Install the default pedestal seal ring of the speed dome on the bracket according to the way shown in Figure 3-2. Step 2 Confirm installation position and outlet mode first, dig holes on the ceiling according to the installation position map, and then put the three plastic expansion bolts into the holes you just dug. Step 3 Unscrew three locking screws on the enclosure by using inner hex wrench, and remove the enclosure. Step 4 Lay the outgoing line according to the outlet mode, and use three self-tapping screws to fix the pedestal on the installation surface, and insert the screws into the expansion bolts. Step 5 Use three locking screws to fix the dome enclosure on the pedestal. So far, the camera installation is completed, and you can adjust the lens angle, zoom, focus and etc on the WEB interface. 6 Dahua 2 Inch PTZ Dome Camera Installation Manual 4 APPENDIX LIGHTENING PROTECTION AND SURGE PROTECTION This series speed dome adopts TVS lighting protection technology. It can effectively prevent damages from various pulse signals below 2000W, such as sudden lighting and surge. While maintaining your local electrical safety code, you still need to take necessary precaution measures when installing the speed dome in the outdoor environment. The distance between the signal transmission cable and high-voltage device (or high-voltage cable) shall be at least 50 meters. Outdoor cable layout shall go under the penthouse if possible. For vast land, please use sealing steel tube under the land to implement cable layout and connects one point to the earth. Open floor cable layout is forbidden. In area of strong thunderstorm hit or near high sensitive voltage (such as near high-voltage transformer substation), you need to install additional high-power thunder protection device or lightning rod. The thunder protection and earth of the outdoor device and cable shall be considered in the building whole thunder protection and conform to your local national or industry standard. System shall adopt equal-potential wiring. The earth device shall meet anti-jamming and at the same time conforms to your local electrical safety code. The earth device shall not short circuit to N (neutral) line of high voltage power grid or mixed with other wires. When connect the system to the earth alone, the earth resistance shall not be more than 4 and earth cable cross-sectional area shall below 25 mm. 7 Dahua 2 Inch PTZ Dome Camera Installation Manual 5 APPENDIX 12V DC WIRE GAUGE AND TRANSMISSION DISTANCE RELATIONSHIP SHEET The recommended max transmission distance is under the following environments: The wire diameter is fixed and the DC 12V power voltage loss rate is below 10%. For the device of DC power supplying, the max allowed voltage loss rate is 10%. All the wires listed in the following sheet are copper wire. (Copper wire resistance
) mm Feetm w 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 0.8000 1.000 1.250 2.000 122.13 37.23 190.8358.16 298.1790.88 61.0618.61 95.4129.08 149.0845.44 40.7112.41 63.6119.39 99.3930.29 763.31 232.66 381.66 116.33 254.4477.55 30.539.31 47.7114.54 74.5422.72 190.8358.16 24.437.45 38.1711.63 59.6318.18 152.6646.53 20.356.20 31.809.69 49.6915.15 127.2238.78 17.455.32 27.268.31 42.6012.98 109.0433.24 15.274.65 23.857.27 37.2711.36 95.4129.08 13.574.14 12.213.72 21.206.46 19.085.82 33.1310.10 29.829.09 84.8128.85 76.3323.27 11.103.38 17.355.29 27.118.26 69.3921.15 10.183.10 15.904.85 24.857.57 63.6119.39 9.392.86 14.684.47 22.946.99 58.7217.90 8.722.66 13.634.15 21.306.49 54.5216.62 8.142.48 7.632.33 12.723.88 11.933.64 19.886.06 18.645.68 50.8915.51 47.7114.54 7.182.19 11.233.42 17.545.35 44.9013.69 6.782.07 10.603.23 16.565.05 42.4112.93 6.431.96 10.043.06 15.694.78 40.1712.25 100 6.111.86 9.542.91 14.914.54 38.1711.63 8 Dahua 2 Inch PTZ Dome Camera Installation Manual 6 APPENDIX WIRE GAUGE REFERENCE SHEET Metric bare wire AWG SWG Bare wire cross diameter mm 0.050 0.060 0.070 0.080 0.090 0.100 0.110 0.130 0.140 0.160 0.180 0.200 0.230 0.250 0.290 0.330 0.350 0.400 0.450 0.560 0.600 0.710 0.750 0.800 0.900 1.000 1.250 1.500 2.000 2.500 3.000 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 16 15 12
/
/
47 46 45 44 43 42 41 39
/
37
/
35
/
33 31 30 29 28
/
24 23 22
/
21 20 19 18
/
14
/
/
section mm2 0.00196 0.00283 0.00385 0.00503 0.00636 0.00785 0.00950 0.01327 0.01539 0.02011 0.02545 0.03142 0.04115 0.04909 0.06605 0.08553 0.09621 0.1257 0.1602 0.2463 0.2827 0.3958 0.4417 0.5027 0.6362 0.7854 1.2266 1.7663 3.1420 4.9080 7.0683 9 Dahua 2 Inch PTZ Dome Camera Installation Manual Note This manual is for reference only. Slight difference may be found in the user interface. All the designs and software here are subject to change without prior written notice. All trademarks and registered trademarks are the properties of their respective owners. If there is any uncertainty or controversy, please refer to the final explanation of us. Please visit our website or contact your local service engineer for more information. Zhejiang Dahua Vision Technology CO., LTD. AddressNo.1199 Binan Road, Binjiang District, Hangzhou, PRC. Postcode: 310053 Tel: +86-571-87688883 Fax: +86-571-87688815 Email:overseas@dahuatech.com Website: www.dahuasecurity.com 10
1 2 | Operation Manual | Users Manual | 5.46 MiB |
Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Dahua 2 Inch PTZ Dome Camera Web3.0 Operation Manual Version 1.0.0 Zhejiang Dahua Vision Technology CO., LTD i Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Table of Contents 2.5 1.1 1.2 2.1 2.2 2.3 2.4 1 Network Config .............................................................................................................. 1 Network Connection .......................................................................................... 1 Log in ................................................................................................................ 1 2 Live ................................................................................................................................ 5 Encode Setup ................................................................................................... 5 System Menu .................................................................................................... 6 Video Window Function Option ......................................................................... 6 Video Window Setup ......................................................................................... 7 2.4.1 Image Adjustment ....................................................................................... 7 2.4.2 Original Size ............................................................................................... 8 2.4.3 Full Screen ................................................................................................. 8 2.4.4 Width and Height Ratio ............................................................................... 8 2.4.5 Fluency Adjustment .................................................................................... 8 2.4.6 Rule Info ..................................................................................................... 9 2.4.7 PTZ ............................................................................................................. 9 PTZ Configuration ............................................................................................. 9 2.5.1 PTZ Control ................................................................................................ 9 2.5.2 Virtual Joystick .......................................................................................... 10 2.5.3 PTZ Function ............................................................................................ 10 3 Playback ...................................................................................................................... 12 Playback ......................................................................................................... 12 3.1.1 Function of Play ........................................................................................ 13 3.1.2 Playback File ............................................................................................ 13 3.1.3 Playback Cut (Clip) ................................................................................... 16 3.1.4 Record Type ............................................................................................. 16 3.1.5 Progress Bar Time Format ....................................................................... 16 3.1.6 Assistant Function .................................................................................... 17 Picture Playback ............................................................................................. 17 3.2.1 Play ........................................................................................................... 18 3.2.2 Playback File ............................................................................................ 18 3.2.3 Snapshot Type ......................................................................................... 19 4 Setup ........................................................................................................................... 20 Camera ........................................................................................................... 20 4.1.1 Conditions ................................................................................................. 20 4.1.2 Video ........................................................................................................ 28 IVS Setup ........................................................................................................ 35 3.2 4.2 4.1 3.1 ii Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 4.2.1 Global Setup ............................................................................................. 35 4.2.2 Scene Setup ............................................................................................. 36 4.2.3 Rule Setup ................................................................................................ 38 4.2.4 Parameter Setup....................................................................................... 44 Network ........................................................................................................... 45 4.3.1 TCP/IP ...................................................................................................... 45 4.3.2 ONVIF ....................................................................................................... 47 4.3.3 Connection ............................................................................................... 48 4.3.4 PPPoE ...................................................................................................... 50 4.3.5 DDNS ....................................................................................................... 51 4.3.6 IP filter ...................................................................................................... 53 4.3.7 SMTP e-mail) ........................................................................................ 54 4.3.8 UPnP ........................................................................................................ 55 4.3.9 SNMP ....................................................................................................... 56 4.3.10 Bonjour ..................................................................................................... 59 4.3.11 Multicast ................................................................................................... 59 4.3.12 WIFI .......................................................................................................... 60 4.3.13 802.1x ....................................................................................................... 62 4.3.14 QoS .......................................................................................................... 62 PTZ ................................................................................................................. 63 4.4.1 Function .................................................................................................... 63 Event ............................................................................................................... 73 4.5.1 Video detect .............................................................................................. 73 4.5.2 Abnormality ............................................................................................... 76 Storage Management ..................................................................................... 79 4.6.1 Schedule ................................................................................................... 79 4.6.2 Destination ................................................................................................ 83 4.6.3 Record control .......................................................................................... 85 System ............................................................................................................ 86 4.7.1 General ..................................................................................................... 86 4.7.2 Account ..................................................................................................... 87 4.7.3 Default ...................................................................................................... 91 4.7.4 Import/Export ............................................................................................ 92 4.7.5 Auto Maintenance ..................................................................................... 92 4.7.6 Upgrade .................................................................................................... 93 Information ...................................................................................................... 94 4.8.1 Version ..................................................................................................... 94 4.8.2 Log ............................................................................................................ 94 4.3 4.4 4.5 4.6 4.7 4.8 iii Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 4.8.3 Online User ............................................................................................... 95 5 Alarm ........................................................................................................................... 96 6 Log out ........................................................................................................................ 98 iv Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Important The following functions are for reference only. Some series products may not support all the functions listed below. v Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 1 Network Config 1.1 Network Connection Speed dome and PC connection mainly has two ways. See Figure 1-1 and Figure 1-2. Figure 1-1 Before you access speed dome via the Internet, you need to have its IP address. You can use quick config tool to search IP of the speed dome. Please refer to Quick Configuration Tool manual. Figure 1-2 1.2 Log in Open IE and input speed dome address in the address bar. For example, if your speed dome IP is 192.168.1.108, then please input http:// 192.168.1.108 in IE address bar. See Figure 1-3. 1 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Input your IP address here Figure 1-3 The login interface is shown as below. See Figure 1-4. Please input your user name and password. Default factory username is admin and password is admin. Note: For security reasons, please modify your password after you first login. Figure 1-4 2 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual If it is your first time to login in, you may see the interface shown as in Figure 1-5. Figure 1-5 Click Please click here to download and install the plug-in. The system pops up warning information to ask you whether run or save this plug-in. Please download to your local computer and then click webplugin.exe; you can see an interface shown as in Figure 1-6. 3 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Click install, you will see Figure 1-7. Figure 1-6 Figure 1-7 When plug-in installation is complete, the installation page closes automatically. The web-end will refresh automatically, and then you can view video captured by the camera. 4 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 2 Live After you logged in, you can see the live monitor window. See Figure 2-1. 1 2 3 4 Figure 2-1 There are four sections:
Section 1: Encode setup bar Section 2: System menu Section 3: Window function option bar Section 4: Window adjust bar 2.1 Encode Setup The encode setup interface is shown as in Figure 2-2. 5 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Please refer to the following sheet for detailed information. Parameter Function Figure 2-2 Main stream Sub (Extra) stream 1 Sub (Extra) stream 2 Protocol Streaming media protocol connection, under main stream config, monitor video or not. Generally for storage and monitor. Streaming media protocol connection, under sub stream 1 config, monitor video or not. When network bandwidth is insufficient, it substitutes main stream for monitoring. Streaming media protocol connection, under sub stream 2 config, monitor video or not. When network bandwidth is insufficient, it substitutes main stream for monitoring. You can select stream media protocol from the dropdown list. There are three options: TCP/UDP/Multicast 2.2 System Menu System menu is shown as in Figure 2-3. Please refer to chapter 2 Live, chapter 3 Playback, chapter 4 Setup, chapter 5 Alarm, chapter 6 Log out for detailed information. Figure 2-3 2.3 Video Window Function Option The interface is shown as below. See Figure 2-4. Please refer to the following sheet for detailed information. Figure 2-4 6 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual SN Parameter Function 1 2 3 4 5 6 7 Regional Focus Remark Zoom Click the button and use mouse to select an area in the box on the video screen, which will make the device auto focus in the selected box area. Click it and then select pen color, you can write down the mark information on the preview interface. When the video is in the original status, click it you can select any zone to zoom in. In the non-original status, you can drag the zoom-in zone in specified range. Right click mouse to restore previous status. Click it; you can use the middle button of the mouse to zoom in/out the video size. Snapshot Click the button to snapshot, save picture to path in Chapter 4.1.2.5. Triple snap Click it, system can snap at 1f/s. All images are saved to path in Chapter 4.1.2.5. Record Click it, system can record. All images are saved to path in Chapter 4.1.2.5. Help Click it to open help file. 2.4 Video Window Setup The interface is shown as in Figure 2-5. Figure 2-5 2.4.1 Image Adjustment Click this button to display/hide image control interface. Click it to open picture setup interface. This interface is on the top right pane. See Figure 2-6 7 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Function Video setup It is to adjust monitor video brightness. Note:
All the operations here apply to WEB end only. Please go to Setup-
>Camera->Conditions to adjust corresponding items. It is to adjust monitor video contrastness. It is to adjust monitor video hue. It is to adjust monitor video saturation. Reset Restore brightness, contrastness saturation and hue to system default setup. R e Figure 2-6 2.4.2 Original Size Click this button to go to original size. It is to display the actual size of the video stream. It depends on the resolution of the bit stream. 2.4.3 Full Screen Click it to go to full-screen mode. Double click the mouse or click the Esc button to exit the full screen. 2.4.4 Width and Height Ratio Click it to restore original ratio or suitable window. 2.4.5 Fluency Adjustment There are three levels of fluency for you to select (real-time, normal, fluent). The default is normal. 8 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 2.4.6 Rule Info Click it to enable the function that the intelligent rule will be displayed in the live interface. The default is enable. 2.4.7 PTZ Click it to open PTZ setup interface. Please refer to chapter 2.5 for detailed setup information. 2.5 PTZ Configuration 2.5.1 PTZ Control Before PTZ operation, please make sure you have properly set PTZ protocol. Parameter Note Position Quick Use mouse to draw a box in monitoring video, PTZ will rotate and focus to quickly positioning. PTZ direction PTZ supports eight directions: left/right/up/down/upper left/upper right/bottom left/bottom right. Speed Zoom/focus It controls rotation speed. The longer the step length, the higher the speed. Step length control PTZ, zoom, focus and iris. Click to increase value and click to decrease value. The PTZ setup/Menu interface is shown as in Figure 2-7. 9 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 2-7 2.5.2 Virtual Joystick The virtual joystick interface is shown as below. See Figure 2-8. This function allows you to control the button in then center to simulate the joystick operation. You can use it to control device movement. Figure 2-8 2.5.3 PTZ Function Click PTZ set button, the interface is shown as in Figure 2-9. Here you can select scan, preset, tour pattern, assistant function and etc. 10 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 2-9 Please refer to the following sheet for PTZ setup information. Parameter Function Scan Preset Tour Pattern Select Scan from the dropdown list, click Start button, you can begin scan operation. Default SN is 1. Input the preset value and then click View button, the camera turns to the corresponding position of the preset. Select Tour from the dropdown list and then click Start button, you can begin tour. You can select Pattern from the dropdown list and then click Start button to begin PTZ movement. Assistant Reserved assistant function. Go to It is the accurate positioning function. Please input corresponding horizontal angle, tilt angle, and speed dome zoom speed and then click Goto button to go to a specified position. One unit of the horizontal angle or tile angle stands for 0.1 degree. For detailed setup information, please go to Setup->PTZ->Function. Click button to begin a PTZ operation. Now you can see it becomes Stop button. Click it again to stop current PTZ operation. 11 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 3 Playback Web client playback supports video playback and picture playback. Note:
Before playback, user shall set storage management as in Chapter 4.6. 3.1 Playback The playback interface is shown as in Figure 3-1. Figure 3-1 There are six sections:
Section 1: Assistant function Section 2: Playback file Section 3: Clip Section 4: Playback bar Section 5: Record type Section 6: Progress bar time format 12 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 3.1.1 Function of Play The function of play is shown as in Figure 3-2. Figure 3-2 Parameter Function Play Stop Frame by frame play Slow Quick Mute When you see this button, it means pause or not played record. Click this button, switch to normal play status. Click this button to stop playing. Click this button to go to next frame. Note:
You shall pause record when you use this function. Click this button to play slowly. Click this button to play quickly. When this button displays, it means audio is silent. Click this button to switch back to normal. Volume Left click mouse to adjust volume. 3.1.2 Playback File In calendar, blue date represents data currently has video record or snapshot. See Figure 3-3. 13 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 3-3 Parameter Function File Type Select dav, as video playback. Select jpg as picture playback. Data Source Default is SD card. Step 1. Click data in blue, time axis displays record file progress bar in color. While, green represents normal record, yellow represents motion detect record, red represents alarm record, and blue represents manual record. Step 2. Step 3. Click certain time on progress bar, playback starts from this time. See Figure 3-4. Figure 3-4 Step 4. Click file list
, select date file will be displayed in list. Step 5. Double click file in list, playback this file and display file size, start time and end time. See Figure 3-5. 14 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 3-5 Parameter Function Search Record Download Format It means records within searched start time and end time on the date. There are two formats: dav, mp4. Record type is dav, click download button to download file to local. Record type is mp4, click download button and download file to path in Ch Download 5.1.2.5. Note:
System does not support download and playback of MP4 file. Back Click back button to go to calendar interface. 15 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 3.1.3 Playback Cut (Clip) Note:
Playback cut function will automatically pause playing record as playback cut and playback cannot be at the same time. Step 1. Click start time to cut on time axis. This time must be within progress bar range. Step 2. Move mouse to cut icon
. You will be ask to select start time. Click cut icon as finish cutting. Step 3. Click playback cut end time on time axis. This time must be within progress bar range. Step 4. Move mouse to cut icon
, you will be asked to select end time. Click cut icon as finish cutting. Step 5. Click Save button to save file cut to path in chapter 4.1.2.5. See Figure 3-6. Figure 3-6 3.1.4 Record Type Check record file type, only selected file will be displayed in progress bar and file list. See Figure 3-7. Figure 3-7 3.1.5 Progress Bar Time Format The interface is shown as in Figure 3-8. Figure 3-8 Please refer to the following sheet for detailed information. 16 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Function 24 hours Click it, means video in past 24 hours. 2 hours 1 hour 30 min Click it, means video in past 2 hours. Click it, means video in past 1 hour. Click it, means video in past 30 min. 3.1.6 Assistant Function Video playback assistant function is shown in Figure 3-9. Figure 3-9 Please refer to the following sheet for detailed information. Parameter Function Digital Zoom Click it, you can zoom in any area when then playback video is in original status. In non-original status, you can zoom in specified zone, Right click mouse to restore its original size. Click this button; you can scroll to zoom in/out video. Snapshot Click this button; you can snapshoot video under playback status. Snapshot will be saved to path in chapter 4.1.2.5. 3.2 Picture Playback Web client picture playback interface has the following three functions. See Figure 3-10. Parameter Function 1 2 3 Play function bar Playback file bar Snapshot type bar 17 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 3-10 3.2.1 Play The play button is shown as below. See Figure 3-11. Figure 3-11 Default icon is
, and it means pause or not played picture. Click play button to switch to normal play status. Icon becomes
. Click it to pause. 3.2.2 Playback File Step 1: Click file list
, select snapshot file of the date. 18 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Step 2: Double click file in list to play this snapshot. Figure 3-12 Figure 3-13 Please refer to the following sheet for detailed information. Parameter Function Search Download Back It means all snapshot files within the start time and end time of selected date. Click download button to download snapshot file to local. Click back button to return to calendar interface and re-select time. 3.2.3 Snapshot Type Check snapshot file type, file list only displays file of selected type. See Figure 3-14. Figure 3-14 19 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 4 Setup Web client setup support camera, network, PTZ, event, storage, system and system info view. 4.1 Camera 4.1.1 Conditions Here you can view device property information. Slight differences may be found due to different speed dome series. The setups become valid immediately after you set. See Figure 4-1. Please refer to the following sheet for detailed information. Parameter Function Figure 4-1 Config File White Balance Here you can set camera setup mode. It includes:
normal/day/night. It is to set camera white balance. It includes:
auto/manual/ATW/outdoor/indoor/outdoor auto/sodium light auto/sodium light. Exposure It is to set camera exposure mode. It includes: auto and manual Backlight It is to set camera backlight mode, including WDR, HLC, and BLC. Day/Night It is to set camera day/night switch mode. The type includes: electronic/mechanical. It includes four modes: auto/B&W/Color/Photosensor. 20 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Zoom& Focus It is to set camera zoom and focus mode. It is to set digital zoom/camera zoom rate. Focus mode includes:
auto/manual/semi auto. Picture Defog Default Important It is to set camera video. It includes:
style/hue/brightness/saturation/ chroma control/gamma/picture flip/picture freeze/sharpness /sharpness control It is to set the defog mode for the picture, including Off and Auto. It is to restore factory default setup. Please make sure your purchased camera supports all the functions listed here. 4.1.1.1 White Balance White balance interface is shown as below. See Figure 4-2. Please refer to the following sheet for detailed information. Parameter Function Figure 4-2 WB mode It is to set camera white balance. It includes:
auto/manual/ATW/outdoor/indoor/outdoor auto/sodium light auto/sodium light. For manual mode, you can input red gain and blue gain value. 4.1.1.2 Exposure 21 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Exposure interface is shown as below. See Figure 4-3. Please refer to the following sheet for detailed information. Parameter Function Figure 4-3 Exposure mode It is to set camera exposure mode. It includes: auto and manual. The default setup is auto. For the auto exposure mode, the gain, shutter and iris are Anti-flicker in auto mode. For manual exposure mode, the gain, shutter and iris are in manual mode. 50Hz Under the condition of AC/50Hz, automatically adjust exposure and ensure there are no horizontal stripes in the image according to the scene brightness. 60Hz Under the condition of AC/60Hz, automatically adjust exposure and ensure there are no horizontal stripes in the image according to the scene brightness. OutdoorAble to switch exposure mode under this mode, and reach the effect of corresponding exposure mode. Exposure compensation It can adjust video whole brightness via setting exposure object brightness so that it can suit for different environments. Gain level Shutter It is to set video brightness under the low illumination environments. It is to set camera exposure time. 22 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Slow exposure Max Auto gain Slow shutter Auto Slow Shutter Min value 2D NR 3D NR If the light may change greatly, you can use slow exposure to get image so that the camera can get stable video. It is to set camera max gain. In lower illumination environment, you can lower the cameras auto exposure time to capture the image and enhance the definition. For the moving object, the trail may appear. Please note it is valid in auto mode. It is to set camera min shutter value. It is to control noise. The higher the level is; the small the noise is. Comparing with the previous one, the picture may become a little bit blurry. It is to control noise. The higher the level is; the small the noise is. Comparing with the previous one, there may appear some smear phenomenon. 4.1.1.3 Backlight The backlight interface is shown as in Figure 4-4. Please refer to the following sheet for detailed information. Parameter Function Figure 4-4 WDR Mode For the environments of strong contrast effect, it can auto adjust image contrast so that you can see the dark and bright section at the same time. 23 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual HLC BLC When there is strong light source in the environment, system can auto adjust video brightness to remove the over exposure effect. For the environments of strong contrast effect, such as under the backlight environment, system can auto adjust image contrast to get clear object. 4.1.1.4 Day/Night Important Please make sure your purchased product camera supports this function. The day/night mode is shown as in Figure 4-5. Please refer to the following sheet for detailed information. Parameter Function Figure 4-5 Type Day/night Sensitivity 4.1.1.5 Zoom &Focus It is to set camera day/night type, including electronic, ICR. It is to set camera day/night mode. The mode includes: B&W/color/auto. It is to camera day/night switch sensitivity. The zoom &focus interface is shown as in Figure 4-6. 24 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Please refer to the following sheet for detailed information. Parameter Function Figure 4-6 Digital zoom Check the box here to enable digital zoom function. Zoom speed It is to set camera zoom speed. The bigger the value is, the faster the speed is. Focus mode Focus limit Sensitivity IR Correction It is to set camera focus mode. It includes: auto/manual/semi auto. It is to camera focus distance in case the focus distance is too small and the focus goes to the enclosure. At the same time, you can change focus distance to adjust focus speed. It is to set camera focus sensitivity. The higher the value is, the easier it is to activate focus. The lower the value is, the difficult it is to activate focus. It is to set IR light focus correction function to enhance focus effect and remove the IR light effect on the focus. 4.1.1.6 Picture Picture interface is shown as in Figure 4-7. 25 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Please refer to the following sheet for detailed information. Parameter Function Figure 4-7 Style Hue Brightness Saturation Chroma control It is to set video style. It includesStandard/soft/ flamboyant. It is to set picture hue. It is to set video brightness. The higher is value is, the bright the video is. It is to set color purity. The higher the purity is, the more color the video is. The lower the purity is, the dark the video is. It is to set video color control level. The higher the value is, the higher the control level is. Gamma It is to set image gamma value. Sharpness It is to set camera sharpness. The higher the sharpness is, the clearer the image is. The object edge becomes clear too. Sharpness control level It is to set camera control level. The higher the value is, the stronger the control level is. Picture Flip It is to set video display mode. It is to turn camera. 4.1.1.7 Defog 26 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-8 Parameter Note Mode It is to set the camera defog mode, it includes: off and auto. 4.1.1.8 Default Default interface is shown as in Figure 4-9. Please refer to the following sheet for detailed information. Figure 4-9 27 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Function Default It is to restore camera parameter to factory default setup. 4.1.1.9 Profile Management Profile management interface is shown as in Figure 4-10. Please refer to the following sheet for detailed information. Parameter Function Figure 4-10 Profile Management Normal Full-time Schedule There are three modes: normal/full-time/schedule. The default setup is normal. It is to adopt the general parameter on the profile file. It is to adopt day or night general parameter on the profile file all the time. It is to adopt the day or night parameter on the profile file by time you set here. 4.1.2 Video 4.1.2.1 Video bit stream The video bit stream interface is shown as below. See Figure 4-11. 28 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Please refer to the following sheet for detailed information. Parameter Function Figure 4-11 Sub Stream Enable Code-Stream Type Encode mode Resolution Please check the box here to enable extra stream function. This function is enabled by default. ACF means using different fps to record. There are two options: VBR and CBR. Please note, you can set video quality in VBR mode. There are three options: H.264, H.264B, H.264H and MJPEG encode. H.264: Main Profile encode mode. H.264B: Baseline Profile encode mode. H.264H: High Profile encode mode. MJPEG: In this encode mode, the video needs large bit stream to guarantee the video definition. You can use the max bit stream value in the recommend bit to get the better video output effect. There are multiple resolutions. You can select from the dropdown list. For each resolution, the recommended bit stream value is different. Frame Rate PAL: 125f/sNTSC: 130f/s.. The frame rate may vary due to different resolutions. 29 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Function Bit Rate Type There are two options: VBR and CBR. Please note, you can set video quality in VBR mode. Under MJPEG mode, only CBR is available. Recommended Bit Recommended bit rate value according to the resolution and frame rate you have set. Bit Rate I Frame Watermark Settings In CBR, the bit rate here is the max value. In dynamic video, system needs to low frame rate or video quality to guarantee the value. The value is null in VBR mode. Please refer to recommend bit rate for the detailed information. Here you can set the P frame amount between two I frames. The value ranges from 1 to 150. Default value is 50. Recommended value is frame rate *2. By calibrating watermark, to see if video is modified. Select Watermark function. Default watermark is Digital CCTV. Watermark character can only be number, letter, _, -
within 128 characters. 4.1.2.2 Snapshot The snapshot interface is shown as in Figure 4-12. Please refer to the following sheet for detailed information. Parameter Function Figure 4-12 Snapshot type There are two modes: general (schedule) and Event
(activation). 30 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Image size It is the same with the resolution of snapshot (main stream or sub stream). Quality Interval 4.1.2.3 Video Overlay It is to set the image quality. There are six levels. It is to set snapshot frequency. The value ranges from 1s to 7s. The video overlay interface is shown as in Figure 4-13 to Figure 4-17. Figure 4-13 Figure 4-14 31 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-15 Figure 4-16 32 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-17 Please refer to the following sheet for detailed information. Parameter Function Privacy Masking Channel Title Time Title OSD Select privacy mask zone, click draw, drag mouse on the video monitoring window and draw the corresponding privacy shielded zone of privacy mask zone. Select privacy mask zone, click delete to delete the corresponding privacy shielded zone of privacy mask zone. Click clear to clear all privacy mask zone(s) on the preview window. Select privacy mask zone, click check to check the corresponding privacy shielded zone of the privacy mask zone. You can enable this function so that system overlays channel information in video window. See Figure 4-. You can use the mouse to drag the channel tile position. You can enable this function so that system overlays time information in video window. See Figure 4-. You can use the mouse to drag the time tile position. Select corresponding enable button, it will display preset, PTZ coordinate, location in video window. It wont display if you select corresponding disable button. See Figure 4-. You can adjust preset, temperature, PTZ coordinate, location by dragging OSD Info box. Alignment include align left and align right. 33 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual You can enable this function to display overlay picture. Click disable to turn it off. See Figure 4-. Click Upload Picture to overlay local picture into monitoring window. You can drag the yellow box to move it. Note:
You cannot enable OSD and overlay at the same time. Set channel title, time title, OSD info, picture overlay and save the change. You can click Refresh to see effect. Picture Overlay Refresh 4.1.2.4 ROI parameter Note Figure 4-18 Check Enable to display ROI in the video monitoring window; check Disable not to display. It is to set the image quality of the ROI, it ranges from 1~6. Enable Image Quality 4.1.2.5 Path The storage path interface is shown as in Figure 4-17. Here you can set snap image saved path and the record storage path. The default monitor image path is C:\Documents and Settings\Administrator\WebDownload\LivePicture. 34 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual The default monitor record path is C:\Documents and Settings\Administrator\WebDownload\LiveRecord. The default playback snapshot path is C:\Documents and Settings\Administrator\WebDownload\PlayBackPicture. The default playback download path is C:\Documents and Settings\Administrator\WebDownload\PlayBackRecord. The default playback cut path is: C:\Documents and Settings\Administrator\WebDownload\PlayBackRecordCut. Note:
Administrator is locally logged in PC account. Please click the Save button to save current setup. Figure 4-19 4.2 IVS Setup 4.2.1 Global Setup Figure 4-20 35 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Note IVS Enable Check it to enable IVS function. Apply Scene It can select normal scene and face detect, normal scene by default. Scene Type It is divided into single scene and multi-scene:
Single scene: It realizes IVS to signel scene. Multi-scene: It realizes IVS to several scenes, tour switch between scenes. 4.2.2 Scene Setup Figure 4-21 Parameter Note Add Scene Zoom PTZ Click to add scene. Click to zoom in the current scene, click to zoom out the current scene. It can adjust the scene location via PTZ button
. Speed It is to adjust the PTZ speed, it ranges from 1~8. 36 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-22 Single scene: Enter Single Scene page, click the button to select the scene which needs to be monitored. Note:
It needs to select the Single Scene from IVS Setup > Global Setup > Scene Type . Figure 4-23 37 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Multi-scene: Enter Multi-scene page, click to add tour scene, move the mouse to the location of Scene Name, select scene, move the mouse to Stay Time to set the stay time of the current scene. Note:
It needs to select Multi-scene in the IVS Setup > Global Setup > Scene Type. 4.2.3 Rule Setup Figure 4-24 Parameter Note Select Scene You can select the scene from the dropdown list so that you can add the corresponding rule. Add Rule Click to add a rule to the selected scene. Enable Check the box here to enable the rule. Rule Name Move your mouse to the Rule Name column to set a name. 38 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Note Move your mouse to the Rule Type column to set the rule type. The option includes: Tripwire/Intrusion/Object abandoned/Missing object detection and etc. Click button to draw current rule. Click button to delete the selected rule. Rule Type Draw Rule Delete Rule 4.2.3.1 Tripwire Figure 4-25 Parameter Note Direction It is to select tripwire direction. The option includes: A->BB->AA<->B. Check the box here to enable this function and then click button set the target filter model in this scene for this rule. Click the button can remove selected target filter model. you can you Target Filter 4.2.3.2 Intrusion 39 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Function Figure 4-26 Detect list action In area: When the tracking object is in the detect zone and the stay time is more than the time threshold you set here, system can activate an alarm. Through area: System can generate an alarm when the tracking object is crossing the limit you set here. Direction Max target No. Min target No. Min last time Report interval It is for the Through area option in the Detect action list item. It is to set the cross direction. The option includes: Enter/Leave/Enter&Leave. It is for the In area option in the Detect action list item. It is to set the max target No. of triggering alarm in area, System will not generate an alarm when the target No in the area is more than the max target No. that you have set. It is for the In area option in the Detect action list item. It is to set the min target No. of triggering alarm in area, System will not generate an alarm when the target No in the area is less than the min target No. that you have set. It is for the In area option in the Detect action list item. Here is to set the min time between the target in the zone and an alarm activation occurrence. It is for the In area option in the Detect action list item. It is to set alarm period. System just alarms once if the value is 0 here. 40 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Function Target filter Check the box here to enable this function and then click button you can set the target filter model in this scene. Click the button selected target filter model. you can remove 4.2.3.3 Abandoned Figure 4-27 Parameter Function Min last time It is to set the min time between the abandoned object occurrence and alarm activation. Target filter Check the box here to enable this function and then click button you can set the target filter model in this scene. Click the button selected target filter model. you can remove 4.2.3.4 Missing Object Detection 41 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-28 Parameter Function Min last time It is to set the min time between the missing object occurrence and alarm activation. Target filter Check the box here to enable this function and then click button you can set the target filter model in this scene. Click the button selected target filter model. you can remove 4.2.3.5 Alarm Activation Setup 42 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-29 Figure 4-30 43 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Function Working Rule Period Record It is to set rule working period, click Setup button to open period setup menu to set. Check the box here so that the device can record when alarm activation occurred. Check the box here so that the device can send out an email to inform user Send Email Note:
when alarm activation occurred. Snapshot Copy Please note current function is null when the device is offline, or IP conflict occurs. Check the box here so that the device can snapshot when alarm activation occurred. Select a rule name from the dropdown list and then click copy the alarm activation setup of current rule to the selected rule. button; you can 4.2.4 Parameter Setup Figure 4-31 44 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Function Scene Please select corresponding scene to set parameter. Detect balance There are three modes: compromise mode, omission detect less and error detect less. Sensitivity The level ranges from 1 to 10. The default setup is 5. The higher the sensitivity is, the easier for the device to detect the low contrast object and small object. At the same time, the error detect may become more. detect Add region Add excluded region Click button Click button 4.3 Network
, you can draw a detection zone. you can draw the privacy mask (shield) zone. 4.3.1 TCP/IP The TCP/IP interface is shown as in Figure 4-32. It supports IPv4 and IPv6. IPv4 supports static IP and DHCP. IPv6 supports static IP only. When you manually modify IP address, WEB will automatically jump to the new IP address. Please refer to the following sheet for detailed information. Figure 4-32 45 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Function Host Name It is to set current host device name. It max supports 15 characters. Ethernet Card Please select the Ethernet port. Default is wired. Mode Please note you can modify the default Ethernet card if there is more than one card. Please note the device needs to reboot to activate the new setup once you modify the default setup. There are two modes: static mode and the DHCP mode. Select DHCP mode, it auto searches IP, and you cannot set IP/subnet mask/gateway. Select static mode, you must manually set IP/subnet mask/gateway. Mac Address It is to display hose Mac address. IP Version It is to select IP version. IPV4 or IPV6. You can access the IP address of these two versions. IP Address Please use the keyboard to input the corresponding number to modify the IP address and then set the corresponding subnet mask and the default gateway. Preferred DNS DNS IP address. Alternate DNS Alternate DNS IP address. 46 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Enable ARP/Ping set device IP address service. You can use ARP/Ping command to modify or set the device IP address if you know the device MAC address. Before the operation, please make sure the speed dome and the PC in the same LAN. This function is on by default. You can refer to the steps listed below. Step 1: Get an IP address. Set the speed dome and the PC in the same LAN. Step 2: Get the physical address from the label of the speed dome. Step 3: Go to the Run interface and then input the following commands. arp s <IP Address> <MAC>
ping l 480 t <IP Address>
Such asarp -s 192.168.0.125 11-40-8c-18-10-11 ping -l 480 -t 192.168.0.125 Step 4: Reboot the device. Step 5: You can see the setup is OK if you can see there are output information such as Reply from 192.168.0.125 from the command output lines. Now you can close the command line. Step 6: Open the browse and then input http://<IP address>. Click the Enter button, you can access now. 4.3.2 ONVIF ONVIF(Open Network Video Interface Forum), this specification describes the model, port, data type and data interaction mode of network video. ONVIF specifications aim is to realize a framework agreement of network video to make the network video products (including video front end, video device and etc) from different manufacturers completely compatible. ONVIF function is disable by default, see Figure 4-33 for more information. 47 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 4.3.3 Connection 4.3.3.1 Connection The connection interface is shown as in Figure 4-34. Figure 4-33 Please refer to the following sheet for detailed information. Figure 4-34 48 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Function Max connection It is the max Web connection for the same device. The value ranges from 1 to 20. Default connection amount is 10. TCP port Port range is 1025~65534. The default value is 37777. You can input the actual port number if necessary. UDP port Port range is 1025~65534. The default value is 37778. You can input the actual port number if necessary. HTTP port Port range is 1025~65524. The default value is 80. You can input the actual port number if necessary. RTSP port The default value is 554. Please leave blank if use default. User uses QuickTime or VLC can play the following formats. BlackBerry can play too. Real-time monitoring URL format, please require real-time RTSP media server, require channel no., bit stream type in URL. You may need username and password. User uses BlackBerry need to set encode mode to H.264B, resolution to CIF and turn off audio. URL format is:
rtsp://username:password@ip:port/cam/realmonitor?channel=1&subtype=0 username/password/IP and port. The IP is device IP and the port default value is 554. You can leave it in blank if it is the default value. Follow standard RTP protocol and when encode mode is MJPEG; the max resolution only supports 2040*2040. HTTPs Enable HTTPs Port Check HTTPs enable, login as https://ip:port. Protect data. Default port is https://ip . It is disabled by default. HTTPs communication port, range is 1025~65534, default is 443. Note:
01024, 3778037880, 1900, 3800, 5000, 5050, 9999, 37776, 39999, 42323 are all special ports. User cannot modify them. Avoid using default port value of other ports. 4.3.3.2 ONVIF ONVIF (Open Network Video Interface Forum) describes network video model, port, data type and data switch modes. ONVIF standard targets to create a network video frame protocol that communicates network video products from different manufacturers. See Figure 4-35. 49 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-35 Please refer to the following sheet for detailed information. Parameter Function Authentication The login authentication is off by default. 4.3.4 PPPoE The PPPoE interface is shown as in Figure 4-36. Input the PPPoE user name and password you get from the IPS (internet service provider) and enable PPPoE function. Please save current setup and then reboot the device to get the setup activated. Device connects to the internet via PPPoE after reboot. You can get the IP address in the WAN from the IP address column. When PPPoE is on, please disable UPnP to avoid influence on dial-up. When you Check PPPoE enable, please disable UPnP. Please note, you need to go to the IP address item to via the device current device information. You can access the client-end via this address. 50 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 4.3.5 DDNS The DDNS interface is shown as in Figure 4-37. Figure 4-36 The DDNS is to set to connect the various servers so that you can access the system via the server. Please go to the corresponding service website to apply a domain name and then access the system via the domain. It works even your IP address has changed. When the device connects to WLAN, you should disable UPnP. 51 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Please refer to the following sheet for detailed information. Parameter Function Figure 4-37 Server Type You can select DDNS protocol from the dropdown list: CN99 DDNS, NO-IP DDNS, Dyndns DDNS, and Dahua DDNS. The Dahua DDNS protocol means you use your self-defined private protocol to realize DDNS function. Server Address DDNS server IP address Domain Name Your self-defined domain name. Username The user name you input to log in the server. Password Update period Device sends out alive signal to the server regularly. Default is The password you input to log in the server. 10min. The Dahua DDNS interface is shown as in Figure 4-38. Please refer to the following sheet for detailed information. Figure 4-38 52 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Function Server Type You can select DDNS protocol from the dropdown list and then enable DDNS function. The Dahua DDNS means you use your self-defined private protocol to realize DDNS function. Server Address DDNS server IP address. Under DDNS the default server address is www.dahuaddns.com Mode The default is auto, and you can select manual. Domain Name Auto and self-defined domain names are both MAC address.quickddns.com. You can self-define prefix. Test It is to test domain name. It is available only under manual mode. Username The user name you input to log in the server. Optional. 4.3.6 IP filter The IP filter interface is shown as in Figure 4-39. You can enable IP filter function so that some specified IP/MAC user can access the speed dome . You can add IP address or IP address section. If you do not check the box here, it means there is on access limit. Here you can add IP address and MAC address. You must add these addresses before enabling the trusted sites. Please note: You must set MAC address in the same network segment. Figure 4-39 53 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 4.3.7 SMTP e-mail) The SMTP interface is shown as in Figure 4-40. Please refer to the following sheet for detailed information. Parameter Function Figure 4-40 SMTP Server Input server address and then enable this function. Port Default value is 25. You can modify it if necessary. Anonymity User Name Password Sender Authentication
(Encryption mode) Title (Subject) For the server supports the anonymity function. You can auto login anonymously. You do not need to input the user name, password and the sender information. The user name of the sender email account. The password of sender email account. Sender email address. You can select SSL, TLS or none. Input email subject here. 54 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Function Attachment Mail receiver Interval Health mail enable Email test System can send out the email of the snapshot picture once you check the box here. Input receiver email address here. Max three addresses. The send interval ranges from 0 to 3600 seconds. 0 means there is no interval. Please note system will not send out the email immediately when the alarm occurs. When the alarm, motion detection or the abnormity event activates the email, system sends out the email according to the interval you specified here. This function is very useful when there are too many emails activated by the abnormity events, which may result in heavy load for the email server. Please check the box here to enable this function. The system will automatically sent out a email once to test the connection is OK or not .Before the email test, please save the email setup information. 4.3.8 UPnP It allows you to establish the mapping relationship between the LAN and the public network. Here you can also add, modify or remove UPnP item. For UPnP on different routers, you must disable UPnP function. See Figure 4-41. In the Windows OS, From Start->Control Panel->Add or remove programs. Click the Add/Remove Windows Components and then select the Network Services from the Windows Components Wizard. Click the Details button and then check the Internet Gateway Device Discovery and Control client and UPnP User Interface. Please click OK to begin installation. Enable UPnP from the Web. If your UPnP is enabled in the Windows OS, the speed dome can auto detect it via the My Network Places. Under manual mode, you can add, delete or modify mapping. Under auto mode, select idle port for auto port mapping without user modification. 55 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-41 4.3.9 SNMP The SNMP interface is shown as in Figure 4-42. The SNMP allows the communication between the network management work station software and the proxy of the managed device. Please install the software such as MG MibBrowser 8.0c software or establish the SNMP service before you use this function. You need to reboot the device to activate the new setup. 56 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Please refer to the following sheet for detailed information. Parameter Function Figure 4-42 SNMP Version Check SNMP v1, device only process v1 info. Check SNMP v2, device only process v2 info. Check SNMP v3, can set username, password and encryption method. Server calibrate corresponding username, password and encryption method too access device and v1/v2 are unavailable. SNMP port The listening port of the proxy program of the device. It is a UDP port not a TCP port. The value ranges from 1 to 65535. The default value is 161 Community It is a string, as command between management and proxy, , defining a proxy, and a managers authentication. Read community Read-only access to all SNMP targets, default is public. Note: Only number, letter, _, and supported. Write community Read/write access to all SNMP targets, default is private. Trap address Trap Note: Only number, letter, _, and supported. The destination address of the Trap information from the proxy program of the device. SNMP trap is a proxy message sent to admin as important event notice or status change. 57 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Function Trap Address Trap Port Address where to send Trap message. Port which send Trap message, default is 162, range 1~65535. Check SNMP v3 version and SNMP port, read community, write community, Trap address, Trap port are same with SNMP v1 and SNMP v2 versions. Only when SNMP version is SNMP v3, user need to configure parameter in chart. See Figure 4-43. Please refer to the following sheet for detailed information. Figure 4-43 Parameter Function SNMP Version SNMP v3 Read-only Username Read/Write Username Default is public. Note:
Name only can be number, letter and underline. Default is private. Note:
Name only can be number, letter and underline. Authentication You may select MD5 or SHA, default is MD5. 58 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Function Authentication Password Password not less than 8 characters. Encryption Default is CBC-DES. Encryption Password Password not less than 8 characters. 4.3.10 Bonjour The Bonjour interface is shown as below. See Figure 4-44. Bonjour is based on the multicast DNS service from the Apple. The Bonjour device can automatically broadcast its service information and listen to the service information from other device. You can use the browse of the Bonjour service in the same LAN to search the speed dome device and then access if you do not know the speed dome information such as IP address. You can view the server name when the speed dome is detected by the Bonjour. Please note the safari browse support this function. Click the Display All Bookmarks: and open the Bonjour, system can auto detect the speed dome of the Bonjour function in the LAN. 4.3.11 Multicast The multicast interface is shown as in Figure 4-45. Figure 4-44 Multicast is a transmission mode of data packet. When there is multiple-host to receive the same data packet, multiple-cast is the best option to reduce the broad width and the CPU load. The source host 59 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual can just send out one data to transit. This function also depends on the relationship of the group member and group of the outer. Note:
Open preview, streaming media protocol, select multicast, and monitor via multicast format. Here you can set multicast address and port. You also need to go to Live interface to set the protocol as Multicast. Please refer to the following sheet for detailed information. Parameter Function Figure 4-45 Enable Select to enable multicast function. Main stream and sub stream cannot be used at the same time. Multicast address Main/sub stream multicast default address is 224.1.2.4 and its range is 224.0.0.0239.255.255.255. Port 4.3.12 WIFI Multicast port. Main stream is 40000, sub stream is 40002 and the range is 102565534. 60 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-46 Parameter Note Enable Check Enable to enable WIFI function. Add SSID Search SSID After it is enables, click Add SSID, add network ID in the dialog box, then it needs to click Search SSID to confirm if the network ID is available. It means the network ID is available if it can search the hotspot of the wireless network. After it is enabled, click Search SSID, then it will display the wireless network hotspot in the current environment for the network camera in the list, double click one of the item to pop up the signal intensity and authentication method, please enter password if necessary. Note:
Please keep the password index number same as that of the router when entering the password. Please click Connect directly. The WIFI information column can display the name, state and IP info of the hotspot which is being connected. Generally it needs some time to connect to WIFI hotspot according to the network signal intensity, so generally it needs to click Refresh after it is reconnected, in this way the WIFI work information column can guarantee the realtime display of working state. 61 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 4.3.13 802.1x 802.1x (port based network access control protocol) supports manual selection of authentication method to control if device connected to LAN can join the LAN. It well supports authentication, charging, safety and management requirement of network. See Figure 4-47. Figure 4-47 Please refer to the following sheet for detailed information. Parameter Function Authentication PEAP (protected EAP protocol). Username It needs the username to login, which is authenticated by the server. Password Please input password here. 4.3.14 QoS The QoS interface is shown as below. See Figure 4-48. Qos (Quality of Service) is network security mechanism. It is a technology to fix the network delay and jam problem and etc. For the network service, the quality of service includes the transmission bandwidth, delay, the packet loss and etc. We can guarantee the transmission bandwidth, lower the delay, reduce the loss of the data packet and anti-dither to enhance the quality. 62 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual We can set the DSCP (Differentiated Services Code Point) of the IP to distinguish the data packet so that the router or the hub can provide different services for various data packets. It can select the different queues according to the priority (64 different priority levels) of the packets and select the bandwidth of the each queue. Level 0 is the lowest, and level 63 is the highest. It can also discard at the different ratio when the broad bandwidth is jam. Please refer to the following sheet for detailed information. Parameter Function Figure 4-48 Real-time monitor Command The value ranges from 0 to 63. The router or the switcher can provide different service for various data packets. The value ranges from 0 to 63. The router or the switcher can provide different service for various data packets. 4.4 PTZ 4.4.1 Function 63 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual In this part, you can operate the PTZ of the camera and control PTZ movement. Figure 4-49 Parameter Function Preset Set camera preset. Tour Set camera tour. Max 8 tours. Scan Set camera scan. Pattern Set camera pattern. PTZ speed Set PTZ movement speed. Idle motion Set camera idle operation. Power up Set camera operation when system boots up. Time Task Set camera time task. PTZ restart Restart camera PTZ. Default Restore camera PTZ default setup. 64 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 4.4.1.1 Preset Preset interface is shown as in Figure 4-50. Please refer to the following sheet for detailed information. Parameter Function Figure 4-50 Preset No. Set preset No. It becomes valid after you set. Preset title Set preset name. You can input self-defined preset name here. Delete Delete corresponding preset. Save Save current preset setup. Add Click it to add a new preset. Clear Clear all presets setup. 4.4.1.2 Tour Tour interface is shown as below. See Figure 4-51. 65 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-51 Please refer to the following sheet for detailed information. Parameter Function Tour No. System auto allocates. Tour title Set tour name. You can input self-defined tour name here. Start Stop Begin tour. Please note this function is null if you have not set a tour. Stop tour Please note this function is null if you have not set a tour Add Click it to add a new tour. Click Add button, you can add a new tour. The default preset value is 1. Double click tour No, you can see a dropdown list for you to select. Please set presets before you use tour function. It is to set the staying time of the tour. Click it to save current setup. Preset Duration
(Interval) Save Refresh Refresh current interface. 66 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 4.4.1.3 Scan Scan interface is shown as below. See Figure 4-52. Figure 4-52 Please refer to the following sheet for detailed information. Parameter Function Scan No. System auto allocates. Speed Start Stop Set scan speed here. You cannot set speed when camera is running scan. Begin scan. Please note this function is null if you have not set a scan. Stop scan Please note this function is null if you have not set a scan Set Click set button, you can set left limit and right limit. Left limit Set camera left limit. Right limit Set camera right limit. 4.4.1.4 Pattern Pattern interface is shown as below. See Figure 4-53. 67 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-53 Please refer to the following sheet for detailed information. Parameter Function Pattern No. System auto allocates. Start Stop Begin pattern. Please note this function is null if you have not set a pattern. Stop pattern Please note this function is null if you have not set a pattern Set Click it you can see start/stop record buttons. Start record Click it to begin recording pattern setup. Stop record Click it to stop recording pattern setup. 4.4.1.5 PTZ speed PTZ speed interface is shown as below. See Figure 4-54. 68 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Please refer to the following sheet for detailed information. Parameter Function Figure 4-54 PTZ speed Here you can set camera PTZ speed. 4.4.1.6 Idle Motion Idle motion interface is shown as below. See Figure 4-55. Figure 4-55 69 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Please refer to the following sheet for detailed information. Parameter Function Enable Check the box here to enable idle motion function. Idle Motion Here you can set preset, scan, pattern, tour. Please note you need to set the corresponding operation first if you want to use this function. Idle time Set idle time. 4.4.1.7 Power up Power up interface is shown as below. See Figure 4-56. Please refer to the following sheet for detailed information. Parameter Function Figure 4-56 Enable Check the box here to enable power up function. Power up Here you can set preset, scan, pattern, tour and auto. Please note you need to set the corresponding function first if you want to use it. 4.4.1.8 Time Task 70 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-57 Figure 4-58 71 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Note Enable It is to enable time task function. Task Action It is to set the time task action, such as preset, tour, scan and pattern. Auto Home When call PTZ artificially and interrupt time task, it can auto restore the time that time task needs. Period Setting It is to set the exact period of time task, click setting to set. Copy to Task No 4.4.1.9 PTZ Restart Click Copy to copy the well-set task information to the designated task number. PTZ restart interface is shown as below. See Figure 4-59. Please refer to the following sheet for detailed information. Figure 4-59 Parameter Function PTZ restart It is to reboot PTZ. 4.4.1.10 Default Default interface is shown as below. See Figure 4-60. 72 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-60 Please refer to the following sheet for detailed information. Parameter Function Default Restore PTZ factory default setup. 4.5 Event 4.5.1 Video detect 4.5.1.1 Motion Detect The motion detect interface is shown as in Figure 4-61 through Figure 4-64. Figure 4-61 73 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-62 Figure 4-63 74 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Please refer to the following sheet for detailed information. Parameter Function Figure 4-64 Enable Working Period Here you can set arm/disarm period. Click set button to open You need to check the box to enable motion detection function. period setup menu. See Figure 4-. There are six periods every day for setup and you must check box in front of each period to enable it. Note: Period setup can be done by dragging mouse while not release left mouse. System only memorizes one event during the anti-dither period. The value ranges from 0s to 100s. Here you can set motion detection region and its sensitivity and area. (The higher the sensitivity is, the easier to trigger motion detect; the smaller the area, the easier to trigger motion detect.) The default covers all regions. You must click save before enabling your setup. See Figure 4-. Check it and so when alarm occurs, system will auto record. You shall set record period in Storage>Schedule and select auto record in record control interface. Anti-dither Area Record Record Delay System can delay the record for specified time after alarm ended. The value ranges from 10s to 300s. 75 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Function Send Email PTZ Snapshot If you enabled this function, System can send out email to alert you when alarm occurs and ends. User can set email address in Network>SMTP. Here you can set PTZ movement when alarm occurs. Such as go to preset x when there is an alarm. The event type includes: preset, tour and pattern. You need to check the box here so that system can backup motion detection snapshot file. You shall set snapshot period in Storage>Schedule. The zone setup interface is shown as Figure 4-. Different colors represent different areas. Each area can set different detection zones. Detection zone cam be irregular and discontinuous. If device monitoring zone is large, user can sub-divide the area into several zones for better motion detect. Please refer to the following sheet for detailed information. Parameter Function Name Sensitivity Area threshold Default area name includes Region0, Region1, Region2, Region3 and custom. It is sensitivity of brightness as motion detection is more possible to be trigger with high sensitivity. You can set up to four areas. The range is 0~100. The recommenced value is 30~70. It is to check target object area related to detection area. The lower the area threshold, the easier to trigger motion detection. You can set up to four areas. The range is 0~100. The recommenced value is 0~10. Waveform Red means motion detect is triggered. Green means motion detect is not triggered. Delete all Clear all areas. Delete Delete selected area. 4.5.2 Abnormality Abnormality includes SD Card (Figure 4-65 to Figure 4-67), network (Figure 4-68 to Figure 4-69), and Unauthorized Access (Figure 4-70). Note: Only device with SD card function has these three statuses: No SD card, capacity warning, and SD card error. 76 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Device without SD card function does not have the above three statuses. Figure 4-65 Figure 4-66 Please refer to the following sheet for detailed information. Parameter Function Figure 4-67 Event Type There are three kinds of events for SD card abnormality alarm: No SD card, Capacity Warning, SD card error. 77 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Parameter Function Enable Send email SD Card Capacity Limit Check to alarm when SD card is abnormal. After you enabled this function, the system can send out email to alarm the specified user. This function is invalid when network is offline or IP conflict occurs. User can set SD card capacity that is left free. When SD card space left is smaller than this limit, alarm occurs. When device is offline or IP conflicts, you can go to Figure 4-68 and Figure 4-69 to set. Figure 4-68 Figure 4-69 When login password keep been wrong for a few times, unauthorized access alarm occurs. This operation is similar to SD card error. Allow login error times as when it exceeds this limit, user account will be locked. See Figure 4-70. 78 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-70 4.6 Storage Management 4.6.1 Schedule Before schedule setup, user must set record mode is auto or manual. Note:
If record mode in record control is off, then device will not snapshoot according to schedule. 4.6.1.1 Record Schedule Record schedule steps:
Step 1. Click Record Schedule, see Figure 4-71. Figure 4-71 Step 2. From Monday to Sunday select record time, click setup on the right. See Figure 4-72. Set period according to actual need. There are six periods available each day. By checking or cancel, you can add or delete three types of record schedule: General, Motion, and Alarm. 79 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Note:
Period setup can be done by dragging in record schedule interface while not releasing left mouse. Figure 4-72 Step 3. Click OK, return to record schedule interface. See Figure 4-73. Green color stands for the general record/snapshot. Yellow color stands for the motion detect record/snapshot. Red color stands for the alarm record/snapshot. Figure 4-73 Step 4. In record schedule interface, click OK. System prompts it is successfully saved. 4.6.1.2 Snapshot Schedule Snapshot setup as:
80 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Step 1. Click Snapshot Schedule tab, see Figure 4-74. Figure 4-74 Step 2. From Monday to Sunday select snapshot time, click setup on the right. See Figure 4-75. Set snapshot period according to actual need. There are six periods available each day. By checking or cancel, user can add or delete three types of snapshot schedule: General, Motion and Alarm. Note: Period setup can be done by dragging in snapshot schedule interface while not releasing left mouse. Figure 4-75 Step 3. Click OK, return to snapshot schedule interface. See Figure 4-76. Green color stands for the general record/snapshot. Yellow color stands for the motion detect record/snapshot. 81 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Red color stands for the alarm record/snapshot. Step 5. In snapshot interface, click OK. System prompts it is successfully saved. Figure 4-76 4.6.1.3 Holiday Schedule Holiday schedule can set specific date as holiday. Step 1. Click Holiday Schedule tab. See Figure 4-77. Figure 4-77 Step 2. Select date to set as holiday. The selected date will be highlighted in yellow. Step 3. Check Record/Snapshot, click Save. System prompts it is successfully saved. Step 4. Check Record Schedule/Snapshot Schedule interface, click setup next to Holiday, refer to setup of Monday to Sunday. Step 5. Complete setup of holiday, then it records/snapshots according to date in holiday schedule. 82 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 4.6.2 Destination 4.6.2.1 Path The destination interface is shown as in Figure 4-78. Path can config record and snapshot storage path. There are three options: Local, FTP and NAS. You can only select one mode. System can save according to the event types. It is corresponding to the three modes (general/motion/alarm) in the Schedule interface. Please check the box to enable the save functions. Note: Only device supports SD card has local. Please refer to the following sheet for detailed information. Parameter Function Figure 4-78 Event Type It includes: scheduled, motion detect and alarm. Local It saved in the SD card. FTP NAS It saved in the FTP server. It saved in NAS disk. 4.6.2.2 Local The local interface is shown as in Figure 4-79. Here you can view local Micro SD card or NAS disk information. You can also operate the read-only, write-only, hot swap and format operation. 83 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 4.6.2.3 FTP The FTP interface is shown as in Figure 4-80. Figure 4-79 You need to check the box to enable the FTP function. When network disconnect occurred or there is malfunction. Emergency storage can save the record/snapshot picture to the local SD card. 4.6.2.4 NAS Figure 4-80 You need to check the box to enable the NAS function. Select NAS storage as to same file to NAS disk. See Figure 4-81. 84 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-81 4.6.3 Record control The record control interface is shown as in Figure 4-82. Please refer to the following sheet for detailed information. Parameter Function Figure 4-82 Pack Duration Here you can select file size within 1min~120min. Default setup is 8 minutes. Pre-record Please input pre-record value here. For example, system can record the four seconds video in the buffer. The record begins from the fifth second. Note:
Configure pre-record time, when alarm or motion detection occurs, if there is no record, system will record the preceding n seconds record. 85 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Disk Full There are two options: stop recording or overwrite the previous files when HDD is full. Stop: Current working HDD is overwriting or current HDD is full, it will stop record. Overwrite: Current working HDD is full; it will overwrite the previous file. There are three modes: Auto/manual/close. There are two options: main stream and sub stream. Record mode Record stream 4.7 System 4.7.1 General The General interface is shown as in Figure 4-83. Please refer to the following sheet for detailed information. Parameter Function Figure 4-83 Device Name Video Standard It is to set device name. This is to display video standard such as PAL. Language You can select the language from the dropdown list. The date and time interface is shown as in Figure 4-84. 86 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-84 Please refer to the following sheet for detailed information. Parameter Function Date format Here you can select date format from the dropdown list. There are two options: 24-H and 12-H. Time Format Time zone The time zone of the device. System time Sync PC DST It is to set system time. It becomes valid after you set. You can click this button to save the system time as your PC current time. Here you can set day night save time begin time and end time. You can set according to the date format or according to the week format. NTP You can check the box to enable NTP function. NTP server You can set the time server address. It is to set the time server port. It is to set the sync periods between the device and the time server. Port Update period 4.7.2 Account 87 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual For the character in the following user name or the user group name, system max supports 15-
digits. The valid string includes: character, number, and underline. Password can be 0~32 characters in number and letter only. User can modify other users password. The user amount is 18 and the group amount is 8 when the device is shipped out of the factory. The factory default setup includes two levels: user and admin. You can set the corresponding group and then set the rights for the respective user in the specified groups. User management adopts group/user modes. The user name and the group name shall be unique. One user shall be included in only one group. Currently logged in user cannot change his/her own right. 4.7.2.1 Username In this interface you can enable anonymity login, add/remove user and modify user name. See Figure 4-85. Figure 4-85 Enable anonymity login: Enable anonymity login, and input IP. No username or password is required, you can log in by anonymity (with limited rights). You can click logout to end your session. Add user: It is to add a name to group and set the user rights. See Figure 4-86. There is a user called admin during initialization, see Figure 4-86, and enter user name and password to select which group it belongs to. Here you can input the user name and password and then select one group for current user. Please note the user rights shall not exceed the group right setup. For convenient setup, please make sure the general user has the lower rights setup than the admin. 88 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-86 Modify user It is to modify the user property, belonging group, password and rights. See Figure 4-87. Modify password It is to modify the user password. You need to input the old password and then input the new password twice to confirm the new setup. Please click the OK button to save. Please note, the password ranges from 0-digit to 32-digit. It shall include the number and letter only. For the user who has the account rights, he can modify the password of other users. 89 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Figure 4-87 4.7.2.2 Group The group management interface can add/remove group, modify group password and etc. The interface is shown as in Figure 4-88. Add group: It is to add group and set its corresponding rights. See Figure 4-89. Figure 4-88 90 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Please input the group name and then check the box to select the corresponding rights. It includes:
preview, playback, record control, PTZ control and etc. Figure 4-89 Modify group Click the modify group button, you can see an interface is shown as in Figure 4-90. Here you can modify group information such as remarks and rights. Figure 4-90 4.7.3 Default The default setup interface is shown as in Figure 4-91. Please note system cannot restore some information such as network IP address. 91 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 4.7.4 Import/Export The interface is shown as in Figure 4-92. Figure 4-91 Please refer to the following sheet for detailed information. Parameter Function Figure 4-92 Import Export It is to import the local setup files to the system. It is to export the corresponding system setup to your local PC. 4.7.5 Auto Maintenance The auto maintenance interface is shown as in Figure 4-93. Here you can select auto reboot and auto delete old files interval from the dropdown list. 92 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual If you want to use the auto delete old files function, you need to set the file period. Figure 4-93 Parameter Function Auto Reboot Check it and set auto reboot time. Auto Delete Old Files Check it and set period within 1~31 days. 4.7.6 Upgrade The upgrade interface is shown as in Figure 4-94. Please select the upgrade file (file extension is .bin) and then click the update button to begin firmware update. Important Improper upgrade program may result in device malfunction!
Figure 4-94 93 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 4.8 Information 4.8.1 Version The version interface is shown as in Figure 4-95. Here you can view system hardware features, software version, release date and etc. Please note the following information is for reference only. Figure 4-95 4.8.2 Log Here you can view system log. See Figure 4-96. Figure 4-96 94 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Please refer to the following sheet for log parameter information. Parameter Function Start time End time Type Search Log information Clear Backup Set the start time of the requested log. (The earliest time is 2000/1/1) Set the end time of the requested log. (The latest time is 2037/12/31) Log type. You can select log type from the drop down list and then click search button to view the list. You can click the stop button to terminate current search operation. You can select one item to view the detailed information. You can click this button to delete all displayed log files. Please note system does not support clear by type. You can click this button to backup log files to current PC. 4.8.3 Online User The online user interface is shown as in Figure 4-97. Here you can view current online user, group name, IP address and login time. Figure 4-97 95 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 5 Alarm Please note some series product does not support this function. Click alarm function, you can see an interface is shown as in Figure 5-1. Here you can set device alarm type and alarm sound setup. Please refer to the following sheet for detailed information. Figure 5-1 Type Alarm type Parameter Motion detection System alarms when motion detection alarm Function Disk full Disk error occurs, System alarms when disk is full. System generates an alarm when HDD is malfunction. Video tampering System alarms when camera is viciously masking. Illegal access System alarms when there is unauthorized access. Prompt Operation When alarm is triggered, there will be s inmain menu of alarm interface and system automatically records alarm info. The icon disappears when user click alarm menu bar. Note:
If alarm interface is displayed, when alarm is triggered, there will be no image prompt, but alarm record will be in list on the right. When alarm occurs, system auto generates alarm audio. The audio supports customized setup. 96 Alarm audio Audio Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual Type Parameter Path Function Here you can specify alarm sound file. 97 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 6 Log out Click log out button, system goes back to log in interface. See Figure 6-1. Figure 6-1 Note:
This manual is for reference only. Slight difference may be found in user interface. All the designs and software here are subject to change without prior written notice. All trademarks and registered trademarks mentioned are the properties of their respective owners. If there is any uncertainty or controversy, please refer to the final explanation of us. Please visit our website for more information. Zhejiang Dahua Vision Technology Co., Ltd AddressNo.1199 Binan Road, Binjiang District, Hangzhou, China. Postcode: 310053 Tel: +86-571-87688883 Fax: +86-571-87688815 Email:overseas@dahuatech.com Website: www.dahuasecurity.com 98 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual FCC Compliance Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to have the capability to access information in that form. 3. (b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. 99 Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual 4. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. 100
1 2 | User Manual | Users Manual | 1.21 MiB | May 25 2019 |
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
1 2 | Users Manual | Users Manual | 491.59 KiB | May 25 2019 |
Dahua 2-inch Network Speed Dome Installation Manual Dahua 2-inch Network Speed Dome Installation Manual Version 1.0.1 Dahua Technology CO., LTD Dahua 2-inch Network Speed Dome Installation Manual Table of Contents 1 INTELLIGENT SPEED DOME INSTALLATION .................................................. 1 1.1 Installation Environments ..................................................................................................................... 1 1.2 Check installation space and installation location intension ........................................................... 1 1.3 Please keep all package material well for future use ....................................................................... 1 2 SETUP BEFORE INSTALLATION ...................................................................... 2 2.1 Check Accessories ................................................................................................................................ 2 2.2 Open Device ........................................................................................................................................... 2 2.3 Installation Position Map ....................................................................................................................... 2 2.4 SD Card Slot and Button ...................................................................................................................... 3 3 CAMERA INSTALLATION .................................................................................. 4 3.1 Component Installation ......................................................................................................................... 4 3.2 Installation Steps ................................................................................................................................... 4 3.2.1 3.2.2 Installation Environments ................................................................................................................. 5 Installation Steps ............................................................................................................................... 5 4 APPENDIX LIGHTENING PROTECTION AND SURGE PROTECTION .......... 5 i Dahua 2-inch Network Speed Dome Installation Manual 5 APPENDIX 12V DC WIRE GAUGE AND TRANSMISSION DISTANCE RELATIONSHIP SHEET ............................................................................................ 7 6 APPENDIX WIRE GAUGE REFERENCE SHEET .......................................... 8 ii Dahua 2-inch Network Speed Dome Installation Manual Welcome Thank you for purchasing our speed dome!
Please read the following safeguards and warnings carefully before you install or use the product!
iii Dahua 2-inch Network Speed Dome Installation Manual Important Safeguards and Warnings Safety Measures 1. Qualified Engineer Needed The installation engineer or maintenance engineer shall have corresponding CCTV system installation certificate or maintenance qualification certificate. The installation engineer or maintenance engineer shall have qualification certificate for work at height. The installation engineer or maintenance engineer shall have the basic knowledge and operation technique for low-voltage cable layout and low-voltage electronic cable connection. Please read the installation manual carefully and keep it well for future reference, We are not liable for any problems caused by unauthorized modifications or attempted repair. 2. Lifting Appliance Requirement Please select the proper speed dome installation mode and use the lifting appliances at the safety environment. The lifting appliances shall have the enough capacity to reach the installation height. The lifting appliances shall have safe performance. The precaution measures include two types: Warning and Note. Warning: It is to alert you there is an optional risk of death or series injury!
Note: It is to alert you there is an optional risk of damage or property loss!
Warning 1. All installation and operation here should conform to your local electrical safety codes. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation. 2. Be sure to use all the accessories (such as power adapter) recommended by manufacturer. 3. Do not connect several speed domes to one power adapter. It may result in overheat or fire if it exceeds the rated load. 4. Avoid aiming the lens at the strong radiation source directly (such as sun, laser, molten steel etc); in case it may cause unrecoverable damage to the thermal imaging detector. Whats worse, it may cause severe damage to the detector. 5. Avoid oil stain and kinds of chemicals tarnishing and damaging the lens surface. 6. Store the device in a cool and dry place where there is ventilation but no intense iv Dahua 2-inch Network Speed Dome Installation Manual electromagnetic field. 7. Violent vibration or crash is not allowed during transportation and application. 8. Before you connect the cable, install or uninstall, or begin the daily maintenance work, please turn off the power and unplug the power cable. 9. Please make sure the produce is secure firmly on the wall or the ceiling. 10. Please turn off the power and unplug the power cable, If there is any smoke, disgusting smell, or noise. Please contact your local retailer or customer service centre for help. 11. All the examination and repair work should be done by the qualified service engineers. We are not liable for any problems caused by unauthorized modifications or attempted repair. Note 1. Safety Transportation Heavy stress, violent vibration or water splash are not allowed during transportation, storage and installation. This series product must use split type package during the transportation. We are not liable for any damage or problem resulting from the integrated package during the transportation. 2. When device is malfunction Shut down the device and disconnect the power cable immediately if there is smoke, abnormal smell or abnormal function. Please contact your local retailer ASAP. 3. Do not try to dismantle or modify the device There is risk of personal injury or device damage resulting from opening the shell. Please contact your local retailer if there is internal setup or maintenance requirement. We are not liable for any problems caused by unauthorized modifications or attempted repair. 4. Do not allow other object falling into the device Please make sure there is no metal or inflammable, explosive substance in the speed dome. The above mentioned objects in the device may result in fire, short-circuit or damage. Please shut down the device and disconnect the power cable if there is water or liquid falling into the camera. Please contact your local retailer ASAP. Please pay attention to the camera. Avoid the sea water or rain to erode the camera. 5. Handle carefully Do not allow this series product fall down to the ground. Avoid heavy vibration. 6. Installation Environment Requirement This series speed dome should be installed in a cool, dry place away from direct sunlight, inflammable, explosive substances and etc. v Dahua 2-inch Network Speed Dome Installation Manual This series product shall be away from the strong electromagnetism radiant, please keep it away from wireless power, TV transmitter, transformer and etc. 7. Daily Maintenance Please use the soft cloth to clean dust on the shell, or you can use soft cloth with cleaning liquid to clean the shell and then use soft cloth to make it dry. Do not use gasoline, dope thinner or other chemical material to clean the shell. It may result in shell transfiguration or paint flake. Do not allow the plastic or rubber material to touch the shell for a long time. It may result in paint flake. vi Dahua 2-inch Network Speed Dome Installation Manual 1 INTELLIGENT SPEED DOME INSTALLATION 1.1 Installation Environments Basic Requirement All installation and operation here should conform to your local electrical safety codes. Before installation, please open the package and check all the components are included. Please make sure the speed dome installation environment and installation mode can meet your requirement. If there is special requirement, please contact your local retailer for more information. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation. 1.2 Check installation space and installation location intension Please make sure the installation environment has enough space to install the speed dome and its corresponding bracket. Please make sure the ceiling, wall and the bracket can support the speed dome and its corresponding installation component. It shall sustain the 8X weight of the speed dome. 1.3 Please keep all package material well for future use Please keep speed dome package material well in case you need to send it back to your local retailer or manufacturer for maintenance work. Non-original package material may result in device damage during the transportation. 1 Dahua 2-inch Network Speed Dome Installation Manual 2 SETUP BEFORE INSTALLATION 2.1 Check Accessories Before the installation, please check the accessories one by one according to the packing list. Please make sure all the components listed are included. (Please check the container list for details.) 2.2 Open Device Remove the package and then take out the device. See Figure 2-1. 2.3 Installation Position Map Figure 2-1 The installation position map is used for drilling positioning on the ceiling and outlet position. See Figure 2-2. Figure 2-2 2 Dahua 2-inch Network Speed Dome Installation Manual 2.4 SD Card Slot and Reset Button SD card slot and button is shown in Figure 2-3. Please make sure the SD card is in the non read-write state when removing it. Otherwise, it may result in data loss and SD card damage. The button is used for default setting. Long press Reset button for more than 5 seconds, the system configuration information will be recovered to default setting. Figure 2-3 3 Dahua 2-inch Network Speed Dome Installation Manual 3 CAMERA INSTALLATION 2-inch network speed dome mainly adopts ceiling mount mode, which can be installed on the ceiling or wall. 3.1 Component Installation The installation of pedestal seal ring is shown in Figure 3-1. The ceiling mount speed dome is shown in Figure 3-2. Figure 3-1 3.2 Installation Steps Figure 3-2 4 Dahua 2-inch Network Speed Dome Installation Manual 3.2.1 Installation Environments The ceiling mount speed dome can be installed in the hard construction ceiling in the indoor environment. Before the installation, please make sure:
The ceiling is thick enough to install the expansion bolt. The ceiling can at least sustain the 8x weight of the speed dome. 3.2.2 Installation Steps Note: There are two outlet modes for ceiling mount installation. Dont drill hole on the ceiling, and open wire outlet from the side of the speed dome. Drill hole on the ceiling, and concealed wire outlet from the ceiling. Step 1 Install the default pedestal seal ring on the pedestal according to the way shown in Figure 3-1. Step 2 Confirm installation position and outlet mode first, dig holes on the ceiling according to the installation position map, and then put the three plastic expansion bolts into the holes you just dug. Step 3 Unscrew three locking screws on the enclosure by using inner hex wrench, and remove the enclosure. Step 4 Lay the outgoing line according to the outlet mode, and use three self-tapping screws to fix the pedestal on the installation surface, and insert the screws into the expansion bolts. Step 5 Use three locking screws to fix the dome enclosure on the pedestal. So far, the camera installation is completed, and you can adjust the lens angle, zoom, focus and etc on the WEB interface. 5 Dahua 2-inch Network Speed Dome Installation Manual 4 APPENDIX LIGHTENING PROTECTION AND SURGE PROTECTION This series speed dome adopts TVS lighting protection technology. It can effectively prevent damages from various pulse signals below 2000W, such as sudden lighting and surge. While maintaining your local electrical safety code, you still need to take necessary precaution measures when installing the speed dome in the outdoor environment. The distance between the signal transmission cable and high-voltage device (or high-voltage cable) shall be at least 50 meters. Outdoor cable layout shall go under the penthouse if possible. For vast land, please use sealing steel tube under the land to implement cable layout and connects one point to the earth. Open floor cable layout is forbidden. In area of strong thunderstorm hit or near high sensitive voltage (such as near high-voltage transformer substation), you need to install additional high-power thunder protection device or lightning rod. The thunder protection and earth of the outdoor device and cable shall be considered in the building whole thunder protection and conform to your local national or industry standard. System shall adopt equal-potential wiring. The earth device shall meet anti-jamming and at the same time conforms to your local electrical safety code. The earth device shall not short circuit to N (neutral) line of high voltage power grid or mixed with other wires. When connect the system to the earth alone, the earth resistance shall not be more than 4 and earth cable cross-sectional area shall below 25 mm2. 6 Dahua 2-inch Network Speed Dome Installation Manual 5 APPENDIX 12V DC WIRE GAUGE AND TRANSMISSION DISTANCE RELATIONSHIP SHEET The recommended max transmission distance is under the following environments: The wire diameter is fixed and the DC 12V power voltage loss rate is below 10%. For the device of DC power supplying, the max allowed voltage loss rate is 10%. All the wires listed in the following sheet are copper wire. (Copper wire resistance
) mm Feetm w 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 0.8000 1.000 1.250 2.000 122.13 37.23 190.8358.16 298.1790.88 61.0618.61 95.4129.08 149.0845.44 40.7112.41 63.6119.39 30.539.31 47.7114.54 99.3930.29 74.5422.72 763.31 232.66 381.66 116.33 254.4477.55 190.8358.16 24.437.45 38.1711.63 59.6318.18 152.6646.53 20.356.20 31.809.69 49.6915.15 127.2238.78 17.455.32 27.268.31 42.6012.98 109.0433.24 15.274.65 23.857.27 37.2711.36 95.4129.08 13.574.14 21.206.46 33.1310.10 84.8128.85 12.213.72 19.085.82 29.829.09 76.3323.27 11.103.38 17.355.29 27.118.26 69.3921.15 10.183.10 15.904.85 24.857.57 63.6119.39 9.392.86 14.684.47 22.946.99 58.7217.90 8.722.66 13.634.15 21.306.49 54.5216.62 8.142.48 7.632.33 12.723.88 11.933.64 19.886.06 18.645.68 50.8915.51 47.7114.54 7.182.19 11.233.42 17.545.35 44.9013.69 6.782.07 10.603.23 16.565.05 42.4112.93 6.431.96 10.043.06 15.694.78 40.1712.25 100 6.111.86 9.542.91 14.914.54 38.1711.63 7 Dahua 2-inch Network Speed Dome Installation Manual 6 APPENDIX WIRE GAUGE REFERENCE SHEET Metric bare wire AWG SWG Bare wire cross diameter mm 0.050 0.060 0.070 0.080 0.090 0.100 0.110 0.130 0.140 0.160 0.180 0.200 0.230 0.250 0.290 0.330 0.350 0.400 0.450 0.560 0.600 0.710 0.750 0.800 0.900 1.000 1.250 1.500 2.000 2.500 3.000 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 16 15 12
/
/
47 46 45 44 43 42 41 39
/
37
/
35
/
33 31 30 29 28
/
24 23 22
/
21 20 19 18
/
14
/
/
section mm2 0.00196 0.00283 0.00385 0.00503 0.00636 0.00785 0.00950 0.01327 0.01539 0.02011 0.02545 0.03142 0.04115 0.04909 0.06605 0.08553 0.09621 0.1257 0.1602 0.2463 0.2827 0.3958 0.4417 0.5027 0.6362 0.7854 1.2266 1.7663 3.1420 4.9080 7.0683 8 Dahua 2-inch Network Speed Dome Installation Manual Note This manual is for reference only. Slight difference may be found in the user interface. All the designs and software here are subject to change without prior written notice. All trademarks and registered trademarks are the properties of their respective owners. If there is any uncertainty or controversy, please refer to the final explanation of us. Please visit our website or contact your local service engineer for more information. Dahua Technology Co., Ltd AddressNo.1199 Binan Road, Binjiang District, Hangzhou, PRC. Postcode: 310053 Tel: +86-571-87688883 Fax: +86-571-87688815 Email:overseas@dahuatech.com Website: www.dahuatech.com 9
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-05-25 | 2422 ~ 2452 | DTS - Digital Transmission System | Original Equipment |
2 | 2016-06-30 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2019-05-25
|
||||
1 2 |
2016-06-30
|
|||||
1 2 | Applicant's complete, legal business name |
Zhejiang Dahua Vision Technology Co., Ltd
|
||||
1 2 | FCC Registration Number (FRN) |
0028432326
|
||||
1 2 | Physical Address |
No.1199, Bin'an Road, Binjiang District, Hangzhou
|
||||
1 2 |
Hangzhou, N/A 310053
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
U******@SGS.COM
|
||||
1 2 |
c******@telefication.com
|
|||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
SVN
|
||||
1 2 | Equipment Product Code |
DH-SD22
|
||||
1 2 |
SD22
|
|||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
Y**** c******
|
||||
1 2 | Telephone Number |
0571-********
|
||||
1 2 | Fax Number |
0571-********
|
||||
1 2 |
c******@dahuatech.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd
|
||||
1 2 |
Cerpass Technology Corporation
|
|||||
1 2 | Name |
P****** Z******
|
||||
1 2 |
M******** C****
|
|||||
1 2 | Physical Address |
588 West Jindu Road, Xinqiao, Songjiang
|
||||
1 2 |
No.66,Tangzhuang Road
|
|||||
1 2 |
ShangHai, 201612
|
|||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86216********
|
||||
1 2 |
86-51******** Extension:
|
|||||
1 2 | Fax Number |
86216********
|
||||
1 2 |
86-51********
|
|||||
1 2 |
P******@sgs.com
|
|||||
1 2 |
m******@cerpass.net
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
Cerpass Technology Corporation
|
||||
1 2 | Name |
M**** C******
|
||||
1 2 | Physical Address |
No.66,Tangzhuang Road
|
||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86-51******** Extension:
|
||||
1 2 | Fax Number |
86-51********
|
||||
1 2 |
m******@cerpass.net
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 | Yes | |||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/26/2016 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | NETWORK PTZ CAMERA | ||||
1 2 | 2 INCH PTZ DOME CAMERA | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40MHz bandwidth mode. | ||||
1 2 | Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
SGS-CSTC Standards Technical Services Co.,Ltd.
|
||||
1 2 |
Cerpass technology corporation Test Laboratory
|
|||||
1 2 | Name |
L******** Y********
|
||||
1 2 |
B******** W******
|
|||||
1 2 | Telephone Number |
+86 (********
|
||||
1 2 |
+886-******** Extension:
|
|||||
1 2 | Fax Number |
+886-********
|
||||
1 2 |
l******@sgs.com
|
|||||
1 2 |
b******@cerpass.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412 | 2462 | 0.027 | ||||||||||||||||||||||||||||||||||||
1 | 2 | 15C | 2422 | 2452 | 0.016 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0740000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC