FCC ID: SVNDHNVR21HSW Network Video Recorder

Network Video Recorder Users Manual V4.4.3 ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Cybersecurity Recommendations Mandatory actions to be taken towards cybersecurity 1. Change Passwords and Use Strong Passwords:

The number one reason systems get hacked is due to having weak or default passwords. It is recommended to change default passwords immediately and choose a strong password whenever possible. A strong password should be made up of at least 8 characters and a combination of special characters, numbers, and upper and lower case letters. 2. Update Firmware As is standard procedure in the tech-industry, we recommend keeping NVR, DVR, and IP camera firmware up-to-date to ensure the system is current with the latest security patches and fixes. Nice to have recommendations to improve your network security 1. Change Passwords Regularly Regularly change the credentials to your devices to help ensure that only authorized users are able to access the system. 2. Change Default HTTP and TCP Ports:

Change default HTTP and TCP ports for systems. These are the two ports used to communicate and to view video feeds remotely. These ports can be changed to any set of numbers between 1025-65535. Avoiding the default ports reduces the risk of outsiders being able to guess which ports you are using. 3. Enable HTTPS/SSL:

Set up an SSL Certificate to enable HTTPS. This will encrypt all communication between your devices and recorder. 4. Enable IP Filter:

Enabling your IP filter will prevent everyone, except those with specified IP addresses, from accessing the system. 5. Change ONVIF Password:

On older IP Camera firmware, the ONVIF password does not change when you change the systems credentials. You will need to either update the cameras firmware to the latest revision or manually change the ONVIF password. 6. Forward Only Ports You Need:

Only forward the HTTP and TCP ports that you need to use. Do not forward a huge range of numbers to the device. Do not DMZ the device's IP address. You do not need to forward any ports for individual cameras if they are all connected to a recorder on site; just the NVR is needed. 7. Disable Auto-Login on SmartPSS:

I Those using SmartPSS to view their system and on a computer that is used by multiple people should disable auto-login. This adds a layer of security to prevent users without the appropriate credentials from accessing the system. 8. Use a Different Username and Password for SmartPSS:

In the event that your social media, bank, email, etc. account is compromised, you would not want someone collecting those passwords and trying them out on your video surveillance system. Using a different username and password for your security system will make it more difficult for someone to guess their way into your system. 9. Limit Features of Guest Accounts:

If your system is set up for multiple users, ensure that each user only has rights to features and functions they need to use to perform their job. 10. UPnP:

UPnP will automatically try to forward ports in your router or modem. Normally this would be a good thing. However, if your system automatically forwards the ports and you leave the credentials defaulted, you may end up with unwanted visitors. If you manually forwarded the HTTP and TCP ports in your router/modem, this feature should be turned off regardless. Disabling UPnP is recommended when the function is not used in real applications. 11. SNMP:

Disable SNMP if you are not using it. If you are using SNMP, you should do so only temporarily, for tracing and testing purposes only. 12. Multicast:

Multicast is used to share video streams between two recorders. Currently there are no known issues involving Multicast, but if you are not using this feature, deactivation can enhance your network security. 13. Check the Log:

If you suspect that someone has gained unauthorized access to your system, you can check the system log. The system log will show you which IP addresses were used to login to your system and what was accessed. 14. Physically Lock Down the Device:

Ideally, you want to prevent any unauthorized physical access to your system. The best way to achieve this is to install the recorder in a lockbox, locking server rack, or in a room that is behind a lock and key. 15. Connect IP Cameras to the PoE Ports on the Back of an NVR:

Cameras connected to the PoE ports on the back of an NVR are isolated from the outside world and cannot be accessed directly. 16. Isolate NVR and IP Camera Network The network your NVR and IP camera resides on should not be the same network as your public computer network. This will prevent any visitors or unwanted guests from getting access to the same network the security system needs in order to function properly. II Regulatory Information FCC Information CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC conditions:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. FCC compliance:

This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the guide, may cause harmful interference to radio communication. For class A device, these limits are designed to provide reasonable protection against harmful interference in a commercial environment. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. For class B device, these limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. III FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. SDOC Statement is shown as below IV V VI Table of Contents 2.1 2.1.1 2.1.2 1.3.1 1.3.2 1 Features and Specifications ............................................................................................................................ 1 1.1 Overview ..................................................................................................................................................... 1 Features ...................................................................................................................................................... 1 1.2 Specifications ............................................................................................................................................. 2 1.3 NVR21-W-4KS2 Series ..................................................................................................................... 2 NVR21HS-W-4KS2 Series ................................................................................................................ 5 2 Front Panel and Rear Panel ............................................................................................................................ 9 Front Panel ................................................................................................................................................. 9 NVR21-W-4KS2 Series ..................................................................................................................... 9 NVR21HS-W-4KS2 Series ................................................................................................................ 9 2.2 Rear Panel ............................................................................................................................................... 10 NVR21-W-4KS2 Series ................................................................................................................... 10 NVR21HS-W-4KS2 Series .............................................................................................................. 11 Bidirectional talk ...................................................................................................................................... 13 Device-end to PC-end ..................................................................................................................... 13 PC-end to the device-end ............................................................................................................... 13 2.4 Mouse Operation ..................................................................................................................................... 14 3 Device Installation ........................................................................................................................................... 15 3.1 Device Installation Diagrams ................................................................................................................. 15 3.2 Check Unpacked NVR ............................................................................................................................ 15 3.3 About Front Panel and Rear Panel....................................................................................................... 15 3.4 HDD Installation ....................................................................................................................................... 16 2.2.1 2.2.2 2.3.1 2.3.2 2.3 NVR41/41-P/41-8P/41-W/21-S2/21-P-S2/21-8P-S2/41-4KS2/41-P-4KS2/41-8P-4KS2/21-4 3.4.1 KS2/21-P-4KS2/21-8P-4KS2/21-W-4KS2 Series ...................................................................................... 16 3.4.2 NVR41H/41H-P/41H-8P/21HS-S2/21HS-P-S2/21HS-8P-S2/41HS-W-S2/41HS-4KS2/41HS

-P-4KS2/41HS-8P-4KS2/21HS-4KS2/21HS-P-4KS2/21HS-8P-4KS2/21HS-W-4KS2 Series ............ 17 3.5 Connection Sample ................................................................................................................................. 17 NVR41HS-W-S2/21-W-4KS2/21HS-W-4KS2 Series .................................................................. 17 3.5.1 Local Basic Operation .................................................................................................................................... 19 4.1 Getting Started ......................................................................................................................................... 19 Boot up and Shut down ................................................................................................................... 19 4.1.1 Device Initialization .......................................................................................................................... 19 4.1.2 Reset Password ................................................................................................................................ 23 4.1.3 4.1.4 Quick Settings ................................................................................................................................... 27 4.2 Camera ..................................................................................................................................................... 51 Connection ........................................................................................................................................ 51 Remote Device Initialization ........................................................................................................... 53 Short-Cut Menu to Register Camera ............................................................................................. 58 Image ................................................................................................................................................. 58 Encode ............................................................................................................................................... 60 Channel Name .................................................................................................................................. 64 4.2.1 4.2.2 4.2.3 4.2.4 4.2.5 4.2.6 VII 4 4.4 4.3 4.4.1 4.4.2 4.2.7 4.2.8 4.3.1 4.3.2 4.3.3 4.3.4 4.3.5 4.3.6 4.3.7 Remote Upgrade .............................................................................................................................. 65 Remote Device Info .......................................................................................................................... 66 Preview ..................................................................................................................................................... 68 Preview .............................................................................................................................................. 68 Navigation bar ................................................................................................................................... 69 Preview Control Interface ................................................................................................................ 71 Right Click Menu .............................................................................................................................. 73 Edit View (Sequence) ...................................................................................................................... 75 Preview Display Effect Setup ......................................................................................................... 77 Fisheye (Optional) ............................................................................................................................ 84 PTZ ............................................................................................................................................................ 86 PTZ Settings...................................................................................................................................... 86 PTZ Control ....................................................................................................................................... 88 4.5 Record File ............................................................................................................................................... 93 4.6 Playback and Search .............................................................................................................................. 93 Instant Playback ............................................................................................................................... 93 4.6.1 Search Interface ............................................................................................................................... 93 4.6.2 Smart Search Playback ................................................................................................................. 101 4.6.3 4.6.4 Mark Playback ................................................................................................................................ 102 Playback Image .............................................................................................................................. 103 4.6.5 Splice Playback ............................................................................................................................... 103 4.6.6 Smart Playback ............................................................................................................................... 104 4.6.7 File List ............................................................................................................................................. 112 4.6.8 4.6.9 Other Aux Functions ..................................................................................................................... 114 Event Manager ...................................................................................................................................... 114 Video Detect .................................................................................................................................... 114 4.7.1 Smart Plan ....................................................................................................................................... 121 4.7.2 IVS (General Behavior Analytics) (Optional) .............................................................................. 123 4.7.3 Face Detect (Optional)................................................................................................................... 142 4.7.4 People Counting (Optional)........................................................................................................... 143 4.7.5 Heat Map ......................................................................................................................................... 144 4.7.6 Plate Recognition ........................................................................................................................... 146 4.7.7 Audio Detect (Optional) ................................................................................................................. 148 4.7.8 Alarm Settings ................................................................................................................................. 149 4.7.9 4.7.10 Abnormality...................................................................................................................................... 154 4.7.11 Alarm output .................................................................................................................................... 156 4.7.12 POS .................................................................................................................................................. 157 4.8 Network ................................................................................................................................................... 161 Network Settings ............................................................................................................................ 161 Network Test .................................................................................................................................... 186 Storage ................................................................................................................................................... 188 Basic ................................................................................................................................................. 188 Schedule .......................................................................................................................................... 189 HDD .................................................................................................................................................. 189 FTP ................................................................................................................................................... 190 Record Control ................................................................................................................................ 192 4.9.1 4.9.2 4.9.3 4.9.4 4.9.5 4.8.1 4.8.2 4.7 4.9 VIII 5.1.1 4.9.6 4.9.7 4.9.8 4.9.9 HDD Information ............................................................................................................................. 192 HDD Group ...................................................................................................................................... 194 HDD Detect ..................................................................................................................................... 194 RAID Manager ................................................................................................................................ 197 4.10 Device Maintenance and Manager ..................................................................................................... 199 4.10.1 Account ............................................................................................................................................ 199 4.10.2 System Info...................................................................................................................................... 208 4.10.3 Voice ................................................................................................................................................. 211 4.10.4 RS232 .............................................................................................................................................. 213 4.10.5 Broadcast ......................................................................................................................................... 214 4.10.6 Security ............................................................................................................................................ 216 4.10.7 Auto Maintain .................................................................................................................................. 219 4.10.8 Backup ............................................................................................................................................. 219 4.10.9 Default .............................................................................................................................................. 223 Upgrade ....................................................................................................................................... 224 4.10.10 4.11 Logout /Shutdown/Restart ................................................................................................................... 226 5 Web Operation ............................................................................................................................................... 228 5.1 General Introduction ............................................................................................................................. 228 Preparation ...................................................................................................................................... 228 5.2 Device Initialization ............................................................................................................................... 228 5.3 Log in....................................................................................................................................................... 231 5.4 Reset Password .................................................................................................................................... 232 5.5 LAN Mode ............................................................................................................................................... 234 5.6 Real-time Monitor .................................................................................................................................. 236 PTZ .......................................................................................................................................................... 237 5.7 Image/Alarm-out .................................................................................................................................... 238 5.8 Image ............................................................................................................................................... 239 Alarm output .................................................................................................................................... 239 5.9 Zero-channel Encode ........................................................................................................................... 239 5.10 WAN Login ............................................................................................................................................. 240 5.11 Setup ....................................................................................................................................................... 241 5.11.1 Camera ............................................................................................................................................ 241 5.11.2 Network ............................................................................................................................................ 254 5.11.3 Event ................................................................................................................................................ 273 5.11.4 Storage ............................................................................................................................................. 302 5.11.5 Setting .............................................................................................................................................. 311 Information ............................................................................................................................................. 333 5.12.1 Version ............................................................................................................................................. 333 5.12.2 Log .................................................................................................................................................... 333 5.12.3 Online User...................................................................................................................................... 334 5.12.4 People Counting ............................................................................................................................. 335 5.12.5 Heat Map ......................................................................................................................................... 335 5.12.6 HDD .................................................................................................................................................. 336 5.13 Playback ................................................................................................................................................. 336 5.13.1 Search Record ................................................................................................................................ 337 5.13.2 File List ............................................................................................................................................. 337 5.8.1 5.8.2 5.12 IX 5.13.3 Playback .......................................................................................................................................... 338 5.13.4 Download ......................................................................................................................................... 338 5.13.5 Load more........................................................................................................................................ 339 5.14 Smart Playback ..................................................................................................................................... 341 IVS (Behavior Analytics) ................................................................................................................ 342 5.14.1 5.14.2 Plate Recognition ........................................................................................................................... 343 5.14.3 Human Face .................................................................................................................................... 344 5.15 Alarm ....................................................................................................................................................... 345 5.16 Log out .................................................................................................................................................... 346 5.17 Un-install Web Control .......................................................................................................................... 347 6 Glossary .......................................................................................................................................................... 348 7 FAQ ................................................................................................................................................................. 349 8 Appendix A HDD Capacity Calculation ...................................................................................................... 354 9 Appendix B Compatible Network Camera List.......................................................................................... 355 X Foreword General This users manual (hereinafter referred to be "the Manual") introduces the installation, functions and operations of the Network Video Recorder (NVR) devices (hereinafter referred to be "the Device"). Safety Instructions The following categorized signal words with defined meaning might appear in the Manual. Signal Words Meaning Indicates a high potential hazard which, if not avoided, will result in death or serious injury. Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury. Indicates a potential risk which, if not avoided, may result in property damage, data loss, lower performance, or unpredictable result. Indicates dangerous high voltage. Take care to avoid coming into contact with electricity. Indicates a laser radiation hazard. Take care to avoid exposure to a laser beam. Electrostatic Sensitive Devices. Indicates a device that is sensitive to electrostatic discharge. Provides methods to help you solve a problem or save you time. Provides additional information as the emphasis and supplement to the text. Revision History No. Version Revision Content Release Time XI No. Version Revision Content Release Time 1 2 3 4 5 6 8 9 V1.0.0 First Release.

-

V3.0.0 V4.0.0 V4.1.0 Add new modules. Baseline switch and update screen interfaces. Add new models. Add cloud update module. Baseline switch and update screen interfaces. Update POS. Modify pictures with QR code and SN. May 10, 2016 August 15, 2017 September 6, 2017 V4.2.0 Add models. September 21, 2017 V4.3.0 V4.3.1 V4.3.2 Delete old models and add new models. Update relevant information. Add new models and update relevant information. Add Privacy Protection Notice and update About the Manual. Add GDPR information. Add FCC information. Update HDD installation. Add NVR21-W-4KS2,NVR21HS-W-

4KS2 and relevant information. Add NVR5424-24P-4KS2:

altitude 5,000 meters. October 12, 2017 April 28, 2018 May, 2018 June, 2018 July, 2018 10 V4.4.2 11 V4.4.3 Privacy Protection Notice As the device user or data controller, you might collect personal data of others such as face, fingerprints, car plate number, Email address, phone number, GPS and so on. You need to be in compliance with the local privacy protection laws and regulations to protect the legitimate rights and interests of other people by implementing measures including but not limited to: providing clear and visible identification to inform data subject the existence of surveillance area and providing related contact. About the Manual The Manual is for reference only. If there is inconsistency between the Manual and the actual product, the actual product shall govern. We are not liable for any loss caused by the operations that do not comply with the Manual. XII The Manual would be updated according to the latest laws and regulations of related regions. For detailed information, see the paper User's Manual, CD-ROM, QR code or our official website. If there is inconsistency between paper User's Manual and the electronic version, the electronic version shall prevail. All the designs and software are subject to change without prior written notice. The product updates might cause some differences between the actual product and the Manual. Please contact the customer service for the latest program and supplementary documentation. There still might be deviation in technical data, functions and operations description, or errors in print. If there is any doubt or dispute, please refer to our final explanation. Upgrade the reader software or try other mainstream reader software if the Guide (in PDF format) cannot be opened. All trademarks, registered trademarks and the company names in the Manual are the properties of their respective owners. Please visit our website, contact the supplier or customer service if there is any problem occurred when using the device. If there is any uncertainty or controversy, please refer to our final explanation. XIII Important Safeguards and Warnings The following description is the correct application method of the device. Read the manual carefully before use to prevent danger and property loss. Strictly conform to the manual during application and keep it properly after reading. Operating Requirement Install the PoE front-end device indoors. The device does not support wall mount. Dont place and install the device in an area exposed to direct sunlight or near heat generating device. Dont install the device in a humid, dusty or fuliginous area. Keep its horizontal installation, or install it at stable places, and prevent it from falling. Dont drip or splash liquids onto the device; dont put on the device anything filled with liquids, in order to prevent liquids from flowing into the device. Install the device at well-ventilated places; dont block its ventilation opening. Use the device only within rated input and output range. Dont dismantle the device arbitrarily. Transport, use and store the device within allowed humidity and temperature range. Power Requirement Make sure to use the designated battery type. Otherwise there may be explosion risk. Make sure to use batteries according to requirements. Otherwise, it may result in fire, explosion or burning risks of batteries!

To replace batteries, only the same type of batteries can be used. Make sure to dispose the exhausted batteries according to the instructions. The product shall use electric wires (power wires) recommended by this area, which shall be used within its rated specification. Make sure to use standard power adapter matched with this device. Otherwise, the user shall undertake resulting personnel injuries or device damages. Use power supply that meets SELV (safety extra low voltage) requirements, and supply power with rated voltage that conforms to Limited Power Source in IEC60950-1. For specific power supply requirements, please refer to device labels. Products with category I structure shall be connected to grid power output socket, which is equipped with protective grounding. Appliance coupler is a disconnecting device. During normal use, please keep an angle that facilitates operation. XIV 1 Features and Specifications 1.1 Overview This series NVR is a high performance network video recorder. This series product support local preview, multiple-window display, recorded file local storage, remote control and mouse shortcut menu operation, and remote management and control function. This series product supports center storage, front-end storage and client-end storage. The monitor zone in the front-end can be set in anywhere. Working with other front-end devices such as IPC, NVS, this series product can establish a strong surveillance network via the CMS. In the network system, there is only one network cable from the monitor center to the monitor zone in the whole network. There is no audio/video cable from the monitor center to the monitor zone. The whole project is featuring of simple connection, low-cost, low maintenance work. This series NVR can be widely used in many areas such as public security, water conservancy, transportation and education. 1.2 Features Cloud Upgrade Real-time Surveillance Playback User Management Storage Alarm For the NVR connected with the Internet, it supports online upgrade to update applications. VGA, HDMI port. Connect to monitor to realize real-time surveillance. Some series support TV/VGA/HDMI output at the same time. Short-cut menu when preview. Support popular PTZ decoder control protocols. Support preset, tour and pattern. Support each channel real-time record independently, and at the same time it can support search, forward play, network monitor, record search, download and etc. Support various playback modes: slow play, fast play, backward play and frame by frame play. time Support time title overlay so that you can view event accurate occurred Support specified zone enlargement. Each group has different management powers that can be edited freely. Every user belongs to an exclusive group. Via corresponding setup (such as alarm setup and schedule setup), you can backup related audio/video data in the network video recorder. Support Web record and record local video and storage the file in the client end. Respond to external alarm simultaneously (within 200MS), based on users pre-defined relay setup, system can process the alarm input correctly and prompt user by screen and voice (support pre-recorded audio). Support central alarm server setup, so that alarm information can remotely notify user automatically. Alarm input can be derived from 1 Network Monitor Window Split Record Backup Network Management Peripheral Equipment Management Auxiliary various connected peripheral devices. Alert you via email/sms. Through network, sending audio/video data compressed by IPC or NVS to client-ends, then the data will be decompressed and display. Support max 128 connections at the same time. Transmit audio/video data by HTTP, TCP, UDP, MULTICAST, RTP/RTCP and etc. Transmit some alarm data or alarm info by SNMP. Support WEB access in WAN/LAN. Adopt the video compression and digital process to show several windows in one monitor. Support 1/4/8/9/16/ 25/36-window display when preview and 1/4/9/16-window display when playback. Support normal/motion detect/alarm record function. Save the recorded files in the HDD, USB device, client-end PC, or network storage server. You can search or playback the saved files at the local-end or via the Web/USB device. Support network backup, USB2.0 record backup function, the recorded files can be saved in network storage server, peripheral USB2.0 device, burner and etc. Supervise NVR configuration and control power via Ethernet. Support management via WEB. Support peripheral equipment management such as protocol setup and Support transparent data transmission such as RS232 (RS-422), RS485 port connection.

(RS-485). Support switch between NTSC and PAL. Support real-time system resources information and running statistics display. Support log file. Local GUI output. Shortcut menu operation via mouse. IR control function (For some series product only.). Shortcut menu operation via remote control. Play the video/audio from the network camera or NVS remotely. 1.3 Specifications 1.3.1 NVR21-W-4KS2 Series Model System Host Processor NVR21-W-4KS2 Industrial grade embedded microcontroller OS Embedded Linux operation system System Resources 4/8-ch series product supports 4/8 HD connection respectively. Total wired network bandwidth supports 80Mbps or wireless network supports 24Mbps. 2 Model NVR21-W-4KS2 Operation Interface WEB/Local GUI Decode Video Decode Type H.264;H265;MPEG4smart264smart265 Decode Capability Max 1-ch 4K, 1-ch 6M,1-ch 5M, 2-ch 4M, 4-ch 1080P or 8-ch 720P Video Video Input 4/8-ch network compression video input Video Output 1-channel VGA analog video output 1-channel HDMI video output, HDMI version is 1.4. VGA and HDMI output the video from the same video source. N/A Video Compression Standard Window Split 1/4/8/9-window Audio Audio Input Audio Output Audio Compression Standard N/A N/A PCM,G.711a,G711u Alarm Alarm Input N/A Alarm Output N/A Function Record Mode Manual record, motion detect record, schedule record, alarm record. The record priority: Manual record>Alarm record>Motion detect record>Schedule record 3 Model NVR21-W-4KS2 Multiple-Chan nel Playback Max 4-channel 1080P playback Motion Detect Each video supports PAL 396(22*18)/ NTSC 330(2215) detection zones. Support multiple sensivityly levels from level 1-level 6. Privacy Mask Each channel supports 4 privacy mask zones File NVR local/network and etc. Record Storage Backup Mode Peripheral USB device Port and Indicator Network Protocol IPv4, IPv6, HTTP, NTP, DNS, ONVIF SATA Port 1 eSATA Port N/A RS232 Port N/A RS485 Port N/A USB Port HDMI Port VGA Port Network Connection 2 peripheral USB2.0 ports. 1 1 1 RJ45 10/100Mbps self-adaptive Ethernet port or 802.11b/g/n Wi-Fi. Power Button Power On-off Button N/A N/A 4 Model NVR21-W-4KS2 IR Receiver Window N/A General Clock Indicator Light Power Supplying Power Consumption Working Temperature Working Humidity Air pressure One built-in real-time clock. One power status indicator light. One network status indicator light. One HDD status indicator light. DC12V 2A 6.6W (No HDD connection)

-10 to40 10-90 86kPa106kPa Dimension Antenna open: 226mm*227mm*191mm;

Antenna closed: 226mm*227mm*40mm. Installation Mode Desk installation 1.3.2 NVR21HS-W-4KS2 Series Model NVR21HS-W-4KS2 System Host Processor Industrial grade embedded microcontroller OS Embedded Linux operation system System Resources Operation Interface 4/8-ch series product supports 4/8 HD connection respectively. Total wired network bandwidth supports 80Mbps or wireless network supports 24Mbps. WEB/Local GUI 5 Model Decode Video Decode Type Decode Capability NVR21HS-W-4KS2 H.264;H265;MPEG4smart264smart265 Max 1-ch 4K, 1-ch 6M,1-ch 5M, 2-ch 4M, 4-ch 1080P or 8-ch 720P Video Video Input 4/8-ch network compression video input Video Output 1-channel VGA analog video output 1-channel HDMI video output, HDMI version is 1.4. VGA and HDMI output the video from the same video source. N/A Video Compression Standard Window Split 1/4/8/9-window Audio Audio Input Audio Output Audio Compression Standard N/A N/A PCM,G.711a,G711u Alarm Alarm Input N/A Alarm Output N/A Function Record Mode Manual record, motion detect record, schedule record, alarm record. The record priority: Manual record>Alarm record>Motion detect record>Schedule record Multiple-Chan nel Playback Max 4-channel 1080P playback 6 Model NVR21HS-W-4KS2 Motion Detect Each video supports PAL 396(22*18)/ NTSC 330(2215) detection zones. Support multiple sensivityly levels from level 1-level 6. Privacy Mask Each channel supports 4 privacy mask zones File NVR local/network and etc. Record Storage Backup Mode Peripheral USB device Port and Indicator Network Protocol IPv4, IPv6, HTTP, NTP, DNS, ONVIF SATA Port 1 eSATA Port N/A RS232 Port N/A RS485 Port N/A USB Port HDMI Port VGA Port Network Connection 2 peripheral USB2.0 ports. 1 1 1 RJ45 10/100Mbps self-adaptive Ethernet port or 802.11b/g/n Wi-Fi. Power Button Power On-off Button IR Receiver Window N/A N/A N/A 7 Model NVR21HS-W-4KS2 Clock Indicator Light Power Supplying Power Consumption Working Temperature Working Humidity Air pressure One built-in real-time clock. One power status indicator light. One network status indicator light. One HDD status indicator light. DC12V 2A 6.6W (No HDD connection)

-10 to40 10-90 86kPa106kPa Dimension Antenna open: 260mm*247mm*198mm;

Antenna closed: 260mm*247mm*48mm. Installation Mode Desk installation General 8 2 Front Panel and Rear Panel NOTE The following front panel and rear panel figures are for reference only. The actual product shall prevail. 2.1 Front Panel 2.1.1 NVR21-W-4KS2 Series The front panel is shown as below. See Figure 2-1. Please refer to the following sheet for front panel button information. Figure 2-1 Icon HDD NET PWR Function The blue light is on when the HDD is malfunction. Name HDD status indicator light Network status light Power status indicator light The blue light is on when the power connection is The blue light is on when the network connection is abnormal. indicator 2.1.2 NVR21HS-W-4KS2 Series The front panel is shown as below. See Figure 2-2. OK. 9 Please refer to the following sheet for front panel button information. Figure 2-2 Icon HDD NET POWER Function The blue light is on when the HDD is malfunction. Name HDD status indicator light Network status light Power status indicator light The blue light is on when the power connection is The blue light is on when the network connection is abnormal. indicator USB2.0 port 2.2 Rear Panel 2.2.1 NVR21-W-4KS2 Series The rear panel is shown as below. See Figure 2-3. OK. Connect to peripheral USB 2.0 storage device, mouse and etc. 10 Please refer to the following sheet for detailed information. Figure 2-3 Port Name Connection HDMI VGA USB2.0 port Network port High Definition Media Interface VGA output port video Power input port WPS/RESET Reset/WPS function self-adaptive Ethernet Function USB2.0 port. Connect to mouse, USB storage device, USB burner and etc. 10M/100Mbps Connect to the network cable. High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4. port. VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. Input DC 12V/2A. Device Wi-Fi reset and WPS function button:

Hold down this button for 5 seconds and above to restore Wi-Fi AP to defaults. Press this button for less than 2 seconds, and then press the WPS button of Wi-Fi IPC, the device and Wi-Fi IPC can be connected. 2.2.2 NVR21HS-W-4KS2 Series The rear panel is shown as below. See Figure 2-4. 11 Figure 2-4 Please refer to the following sheet for detailed information. Function Icon Name Power socket. input Power socket. Input DC12V/2A. HDMI VGA Network port USB2.0 port Definition High Media Interface 10M/100Mbps self-adaptive Ethernet port. Connect to the network cable. USB2.0 port. Connect to mouse, USB storage device, and etc. High definition audio and video signal output port. It transmits uncompressed high definition video and multiple-channel data to the HDMI port of the display device. HDMI version is 1.4. VGA video output port VGA video output port. Output analog video signal. It can connect to the monitor to view analog video. GND Ground end WPS/RESET Reset/WPS function Device Wi-Fi reset and WPS function button:

Hold down this button for 5 seconds and above to restore Wi-Fi AP to defaults. Press this button for less than 2 seconds, and then press the WPS button of Wi-Fi IPC, the device and Wi-Fi IPC can be connected. 12 2.3 Bidirectional talk 2.3.1 Device-end to PC-end Device Connection Please connect the speaker or the pickup to the first audio input port in the device rear panel. Then connect the earphone or the sound box to the audio output port in the PC. Login the Web and then enable the corresponding channel real-time monitor. Please refer to the following interface to enable bidirectional talk. See Figure 2-5. Figure 2-5 Listening Operation At the device end, speak via the speaker or the pickup, and then you can get the audio from the earphone or sound box at the pc-end. See Figure 2-6. Figure 2-6 2.3.2 PC-end to the device-end Device Connection Connect the speaker or the pickup to the audio output port in the PC and then connect the earphone or the sound box to the first audio input port in the device rear panel. Login the Web and then enable the corresponding channel real-time monitor. Please refer to the above interface (Figure 2-5) to enable bidirectional talk. Listening Operation At the PC-end, speak via the speaker or the pickup, and then you can get the audio from the earphone or sound box at the device-end. See Figure 2-7. Figure 2-7 13 2.4 Mouse Operation Please refer to the following sheet for mouse operation instruction. click Left mouse When you have selected one menu item, left click mouse to view menu content. Modify checkbox or motion detection status. Click combo box to pop up dropdown list In input box, you can select input methods. Left click the corresponding button on the panel you can input numeral/English character (small/capitalized). Here stands for backspace button. stands for space button. In English input mode: _stands for input a backspace icon and stands for deleting the previous character. Double left click mouse click Right mouse Press middle button In numeral input mode: _ stands for clear and stands for deleting the previous numeral. Implement special control operation such as double click one item in the file list to playback the video. In multiple-window mode, double left click one channel to view in full-window. Double left click current video again to go back to previous multiple-window mode. In real-time monitor mode, pops up shortcut menu. Exit current menu without saving the modification. In numeral input box: Increase or decrease numeral value. Switch the items in the check box. Page up or page down Move mouse Select current control or move control Drag mouse Select motion detection zone Select privacy mask zone. 14 3 Device Installation Note: All the installation and operations here should conform to your local electric safety rules. 3.1 Device Installation Diagrams Please refer to the following diagrams to install the NVR. 3.2 Check Unpacked NVR When you receive the NVR from the forwarding agent, please check whether there is any visible damage. The protective materials used for the package of the NVR can protect most accidental clashes during transportation. Then you can open the box to check the accessories. Please check the items in accordance with the list. Finally you can remove the protective film of the NVR. 3.3 About Front Panel and Rear Panel 15 The model number in the stick on the bottom of NVR is very important; please check according to your purchase order. The label in the rear panel is very important too. Usually we need you to represent the serial number when we provide the service after sales. 3.4 HDD Installation For the first time installation, make sure whether the HDD has been installed or not. We recommend to use HDD of enterprise level or surveillance level. It is not recommended to use PC HDD. Shut off the power before you replace the HDD. Use the dedicated SATA HDD for monitoring recommended by the HDD manufacturer. You can refer to the Appendix for HDD space information and recommended HDD brand. 3.4.1 NVR41/41-P/41-8P/41-W/21-S2/21-P-S2/21-8P-S2/41-4KS2/41-P-4KS2/41-8P-4KS 2/21-4KS2/21-P-4KS2/21-8P-4KS2/21-W-4KS2 Series Turn the device upside down and then secure the screws firmly. Loosen the screws of the bottom of the chassis. Connect the HDD cable and power the the HDD and cable mainboard respectively. to Place the HDD in accordance with the four holes in the bottom. Put the cover back and then fix the screws of the rear panel. The installation is complete. 16 3.4.2 NVR41H/41H-P/41H-8P/21HS-S2/21HS-P-S2/21HS-8P-S2/41HS-W-S2/41HS-4KS 2/41HS-P-4KS2/41HS-8P-4KS2/21HS-4KS2/21HS-P-4KS2/21HS-8P-4KS2/21HS-

W-4KS2 Series Loosen the screws of the upper cover and side panel. Connect the one end of the the the HDD data cable and power mainboard. cable to Connect the other end of the HDD data cable and the power cable to the HDD. Place the HDD in accordance the four holes on with bottom of the chassis. the Turn the device upside down;

fix the screws to secure the HDD on the bottom of the chassis. Put the cover in accordance with the clip and then fix the screws on the rear panel and side panel. 3.5 Connection Sample 3.5.1 NVR41HS-W-S2/21-W-4KS2/21HS-W-4KS2 Series Please refer to Figure 3-1 for connection sample. The following figure for reference only. 17 Figure 3-1 18 4 Local Basic Operation Note Slight difference may be found on the user interface. The following figures for reference only. 4.1 Getting Started 4.1.1 Boot up and Shut down 4.1.1.1 Boot up Warning Before the boot up, please make sure:

For device security, please connect the NVR to the power adapter first and then connect the device to the power socket. The rated input voltage matches the device power on-off button. Please make sure the power wire connection is OK. Then click the power on-off button. Always use the stable current, if necessary UPS is a best alternative measure. Please follow the steps listed below to boot up the device. Step 1 Connect the device to the monitor and then connect a mouse. Step 2 Connect power cable. Step 3 Click the power button at the front or rear panel and then boot up the device. After device booted up, the system is in multiple-channel display mode by default. 4.1.1.2 Shutdown Note When you see corresponding dialogue box System is shutting down Do not click power on-off button directly. Do not unplug the power cable or click power on-off button to shutdown device directly when device is running (especially when it is recording.) There are three ways for you to log out. a) Main menu (RECOMMENDED) From Main Menu->Shutdown, select shutdown from dropdown list. Click OK button, you can see device shuts down. b) From power on-off button on the front panel or remote control. Press the power on-off button on the NVR front panel or remote control for more than 3 seconds to shut down the device. c) From power on-off button on the rear panel. 4.1.2 Device Initialization If it is your first time to use the device, please set a login password of admin (system default user). You can select to use unlock pattern to login or not at your own choosing. Note For your device safety, please keep your login password of admin well after the initialization steps, and change the password regularly. 19 Please follow the steps listed below. Step 1 Boot up NVR. Device displays device initialization interface. See Figure 4-1. Figure 4-1 Step 4 Set login password of admin. User name: The default user name is admin. Password/confirm password: The password ranges from 8 to 32 digitals. It can contain letters, numbers and special characters (excluding ',",;,:,&) . The password shall contain at least two categories. Usually we recommend the strong password. Prompt question: If you set the prompt question here. On the login interface, move your mouse on

, device can display the corresponding prompt question for you to remind the password. WARNING STRONG PASSWORD RECOMMENDED-For your device own safety, please create a strong password of your own choosing. We also recommend you change your password periodically especially in the high security system. Step 5 Click Next, device goes to the following interface. See Figure 4-2. 20 Figure 4-2 Step 6 Set unlock pattern. After set unlock pattern, device goes to password protection interrface. See Figure 4-3. Note Device adopts unlock pattern to login by default if you have set pattern here. If there is no unlock pattern, please input the password to login. Click Skip if there is no need to set unlock pattern. 21 Figure 4-3 Step 7 Set security questions. Note After setting the security questions here, you can use the email you input here or answer the security questions to reset admin password. Refer to chapter 4.1.3 Reset password for detailed information. Cancel the email or security questions box and then click Next button to skip this step. Email: Input an email address for reset password purpose. In case you forgot password in the future, input the security code you got on the assigned email to reset the password of admin. If you have not input email here or you need to update the email information, please go to the main menu->Setting->System->Account to set. Refer to chapter 4.10.1 Account for detailed information. Security question: Set security questions and corresponding answers. Properly answer the questions to reset admin password. In case you have not input security question here or you need the main menu->Setting->System->Account->Security question to set. Refer to chapter 4.10.1.3 Security question for detailed information. information, please go the security question to update to Note If you want to reset password by answering security questions, please go to the local menu interface. 22 Step 8 Click OK to complete the device initialization setup. Device goes to startup wizard interface. Refer to chapter 4.1.4 Quick Settings for detailed information. Reset Password 4.1.3 If you forgot the admin password, you can reset the password by the following ways:

When the password reset function is enabled, you can scan the QR code on the local interface to reset the password. When the password reset function is disabled, you can reset password via the security questions configured before. If the secury questions are not configured, system displays that Password reset is closed! You need to contact the customer service for help. Step 1 Go to the device login interface. See Figure 4-4 or Figure 4-5. If you have set unlock pattern, device displays unlock pattern login interface. See Figure 4-4. Click Forgot Unlock Pattern and device goes to Figure 4-5. If you have not set unlock pattern, device displays password interface. See Figure 4-5. Note Click Switch User button and NVR goes to general user login interface. The default user name is admin. Click the user name drop-down arrow, select a user from the drop-down list, and then you can log in via some other account. Figure 4-4 23 Figure 4-5 Step 2 Click

. If you have not input email address information when you are initializing the device, the interface is shown as in Figure 4-6. Please input an email address, click Next button, and then device goes to Figure 4-7. If you have input email when you are initializing the device, device goes to Figure 4-7. Figure 4-6 24 Step 3 Click OK button and device goes to Figure 4-8 Figure 4-7 After clicking OK, we will collect your personal information such as cell phone number, MAC address and device serial number. The collected information is used for verifying device legality and sending security code. Please read the notice carefully and confirm if you agree with the collection or not. Figure 4-8 Step 4 Reset login password. There are two ways to reset the password: Scanning QR code and resetting by email and answering security questions (local menu only) 25 Email In Figure 4-8, follow the prompts on the interface to scan the QR code, and then input the security code you get via the assigned email. For the same QR code, max scan twice to get two security codes. Refresh the QR code if you want to get security code again. The security code on your email is only valid for 24 hours. Security questions In Figure 4-6, select security question from the drop down list. Device displays security question interface. See Figure 4-9. Please input the correct answers here. You shall configure the security questions before resetting password by answering the questions. If you have not configured the questions, this method will not be available in the drop-down list. Step 5 Click Next button. Device displays reset password interface. See Figure 4-10. Figure 4-9 26 Figure 4-10 Input new password and then confirm. Step 6 The password can be set from 8 characters through 32 characters and contain at least two types from number, letter and special character (excluding"'", """, ";", ":" and "&"). It is recommended to set password of high security according to the prompts. Step 7 Click OK button to complete the setup. 4.1.4 Quick Settings After you successfully initialize the device, it goes to startup wizard. Here you can quickly configure your device. It includes general setup, basic network setup, camera registration, P2P, and schedule interface. Note Once the power is off during the quick settings process, you need to go through startup wizard again when the device boot up the next time. After completing all items on the startup wizard, the startup wizard automatically hides when the device boot up the next time. Please follow the steps listed below. Boot up the device and complete the device initialization. Device goes to startup wizard. See Figure 4-11. Select Auto-check for updates, device automatically checks if there is new applications or not every day. 27 Figure 4-11 Note After auto-check is enabled, in order to inform you of the latest firmware upgrades, we will collect your personal information such as IP address, device name, firmware version and device SN. The collected information is used for verifying device legality and pushing upgrade notice. 4.1.4.1 General It is to set NVR basic information such as system date, holiday and etc. 4.1.4.1.1 General It is to set device basic information such as device name, serial number and etc. Please follow the steps listed below. Step 1 Click Next button, Enter General interface. Step 2 Click General button. The interface is shown as below. See Figure 4-12. Note From Main menu->Setting->System->General->General, you can go to the general interface. Step 3 Set parameters. Device ID: Please input a corresponding device name here. Device No: When you are using one remote control (not included in the accessory bag) to control several NVRs, you can give a name to each NVR for your management. Language: System supports various languages: Chinese (simplified), Chinese (Traditional), English, Italian, Japanese, French, Spanish (All languages listed here are optional. Slight difference maybe found in various series.) Video standard: There are two formats: NTSC and PAL. 28 HDD full: Here is for you to select working mode when hard disk is full. There are two options: stop recording or rewrite old files. Pack duration: Here is for you to specify record duration. The value ranges from 1 to 120 minutes. Default value is 60 minutes. Realtime play: It is to set playback time you can view in the preview interface. The value ranges from 5 to 60 minutes. Auto logout: Here is for you to set auto logout interval once login user remains inactive for a specified time. Value ranges from 0 to 60 minutes. Monitor channels when logout: Here you can set channels you want to view when your account has logged out. Click the button and then cancel the channel name box, you need to login to view the corresponding video. The channel window displays interface. in preview Navigation bar: Check the box here, system displays the navigation bar on the interface. IPC Time Sync: You can input an interval here to synchronize the NVR time and IPC time. Startup wizard: Once you check the box here, system will go to the startup wizard directly when the system restarts the next time. Otherwise, it will go to the login interface. Mouse sensitivity: You can set double click speed via dragging the slide bard. You can Click Default button to restore default setup. Figure 4-12 Step 4 Click Apply button to save settings. 4.1.4.1.2 Date and Time 29 Here you can set device time. You can enable NTP (Network Time Protocol) function so that the device can sync time with the NTP server. Step 1 Click Date and time button. See Figure 4-13. Note From Main menu->Setting->System->General->Date and time, you can go to the date and time interface. System time: Here is for you to set system time Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY. Date separator: There are three denotations to separate date: dot, beeline and solidus. DST: Here you can set DST time and date by week or by date. Please enable DST function and then select setup mode. Please input start time and end time and click Save button. Time format: There are two types: 24-hour mode or 12-hour mode. NTP: It is to set NTP server, port and interval. Warning System time is very important; do not modify time casually unless there is a must!

Before your time modification, please stop record operation first!

Step 5 Click Apply button to save settings. 4.1.4.1.3 Holiday Figure 4-13 30 Here you can add, edit, delete holiday. After you successfully set holiday information, you can view holiday item on the record and snapshot period. Step 1 Click Holiday button. See Figure 4-14. Note From Main menu->Setting->System->General->Holiday, you can go to the holiday interface. Figure 4-14 Step 2 Click Add new holiday button, device displays the following interface. See Figure 4-15. 31 Figure 4-15 Step 3 Set holiday name, repeat mode and holiday mode. Note Click Add more to add new holiday information. Step 4 Click Add button, you can add current holiday to the list. Note Click the dropdown list of the state; you can enable/disable holiday date. Click to change the holiday information. Click to delete current date. Step 5 Click Apply button to save settings. 4.1.4.2 Basic Network Settings Set device IP address, DNS (Domain Name System) information. Preparation Make sure the device has properly connected to the network. Step 1 Click Next button, device goes to TCP/IP interface. See Figure 4-16. Note From Main menu->Setting->Network->TCP/IP, you can go to the TCP/IP interface. Different series products have different Ethernet adapter amount and type. Please refer to the actual product. 32 Step 2 Click

, device display edit interface. See Figure 4-17. Figure 4-16 33 Figure 4-17 Step 3 Set parameters. Network Mode : Includes multiple access, fault tolerance, and load balancing Multiple-address mode: eth0 and eth1 operate separately. You can use the services such as HTTP, RTP service via etho0 or the eth1. Usually you need to set one default card (default setup is etho) to request the auto network service form the device-end such as DHCP, email, FTP and etc. In multiple-address mode, system network status is shown as offline once one card is offline. Network fault-tolerance: In this mode, device uses bond0 to communicate with the external devices. You can focus on one host IP address. At the same time, you need to set one master card. Usually there is only one running card (master card).System can enable alternate card when the master card is malfunction. The system is shown as offline once these two cards are both offline. Please note these two cards shall be in the same LAN. Load balance: In this mode, device uses bond0 to communicate with the external device. The eth0 and eth1 are both working now and bearing the network load. Their network load are general the same. The system is shown as offline once these two cards are both offline. Please note these two cards shall be in the same LAN. Main Network Card: Please select eth0/eth1 (optional).after enable multiple access function. Note The dual-Ethernet port series support the above three configurations and supports functions as multiple-access, fault-tolerance and load balancing. MAC address: The host in the LAN can get a unique MAC address. It is for you to access in the LAN. It is read-only. IP address: Here you can use up/down button () or input the corresponding number to input IP address. Then you can set the corresponding subnet mask the default gateway. 34 Default gateway: Here you can input the default gateway. Please note system needs to check the validity of all IPv6 addresses. The IP address and the default gateway shall be in the same IP section. That is to say, the specified length of the subnet prefix shall have the same string. DHCP: It is to auto search IP. When enable DHCP function, you cannot modify IP/Subnet mask /Gateway. These values are from DHCP function. If you have not enabled DHCP function, IP/Subnet mask/Gateway display as zero. You need to disable DHCP function to view current IP information. Besides, when PPPoE is operating, you cannot modify IP/Subnet mask /Gateway. MTU: It is to set MTU value of the network adapter. The value ranges from 1280-7200 bytes. The default setup is 1500 bytes. Transfer mode: Here you can select the priority between fluency/video qualities. Step 4 Click OK to NIC settings. Device goes back to TCP/IP interface. Note Click to cancel NIC bonding. Please note device needs to reboot to activate new setup. Step 5 Set network parameters. IP Version: There are two options: IPv4 and IPv6. Right now, system supports these two IP address format and you can access via them. Preferred DNS server: DNS server IP address. Alternate DNS server: DNS server alternate address. Default Network Card: Please select eth0/eth1/bond0(optional) after enable multiple-access function. LAN download: System can process the downloaded data first if you enable this function. The download speed is 1.5X or 2.0X of the normal speed. Note For IPv6 version, the IP address, default gateway, preferred DNS; alternate DNS is 128-digit. Please fill in all items here. This function is for some series product only. Step 6 Click Next to complete the settings. 4.1.4.3 P2P P2P is a kind of convenient private network penetration technology. You do not need to apply for dynamic domain name, doing port mapping or deploying transit server. You can add NVR devices through the below way to achieve the purpose of managing multiple NVR devices at the same time. Scan the QR code, download mobile app, and then register an account. For details, see Mobile App Operation. Log in www.gotop2p.com, register an account, and then add device via the serial number. For details, see Introduction of P2P Operations which is available in the disk delivered with the device. 35 Connect the NVR device to the Internet, otherwise P2P can not run properly. Step 1 Enter from main menu -> Setting -> Network -> P2P. The P2P interface is displayed. See Figure 4-18. Figure 4-18 P2P is enbaled by default. When P2P is enabled and the device is connected to the Internet, it displays Online in the Status box. We need to collect information like IP address, MAC address, device name and device SN. All collected information is used only for the purpose of remote access. Step 2 Click Next to conplete the setting. If system displays Online in the Status box, P2P registration is successful. Mobile APP Operation The following contents are introduced in the example of mobile App. Step 1 Scan the QR code to download and install the mobile App. Step 2 Select Camera and enter the main interface. Step 3 Register device in the mobile App:

1) Click and select Device Manager. See Figure 4-19. 36 Figure 4-19 2) Click and enter the Add Device interface. Mobile App supports device initialization. 3) Select Wired Device -> P2P to enter the P2P interface. 4) Click the QR code icon behind the SN to enter the QR code scan interface. 5) Scan the device label or scan the SN QR code got by entering from main menu -> Setup ->

Network -> P2P. When the scan is successful, the device SN will be displayed in the SN item. 6) Enter name and password. Step 4 After device registraion on mobile App, click Start Preview and you can see the monitor screen. 4.1.4.4 Wi-Fi AP 4.1.4.4.1 General Settings Configure the Wi-Fi parameters of the NVR device to make the Wi-Fi IPC automatically connect to it via this Wi-Fi. This function is available only for NVR devices with built-in Wi-Fi module. See the actual situation. When the Wi-Fi IPC and NVR are corollary devices, they can be paired automatically after device startup. Step 1 From main menu > Setting > Network > Wi-Fi AP > General. The General interface is displayed. See Figure 4-20. 37 Figure 4-20 Step 2 Select the 2.4GHz check box and configure the parameters. For details, see following table. Parameter Function 2.4GHz SSID Encryption Type Password Channel Gain Select the check box to enable Wi-Fi. Enter the SSID name. You can use this name to search the device. Select the encryption type from the dropdown list, including WPA2 PSK, WPA PSK and OPEN. Enter the SSID password. You can use this password to connect to the network. Select the channel to connect the Wi-Fi IPC. Adjust the Wi-Fi signal intensity. 4.1.4.4.2 Advanced Settings This function is available only for NVR devices with built-in Wi-Fi module. See the actual situation. You can configure the Wi-Fi IP address, subnet mask, default gateway and DHCP derver here. Step 1 From main menu > Setting > Network > Wi-Fi AP > Advanced. The Advanced interface is displayed. See Figure 4-21. 38 Step 2 Configure the parameters. For details, see following table. Figure 4-21 Parameter IP Address Subnet Mask Default Gateway Start IP/End IP Upgrade Function Input the IP address, subnet mask and default gateway of the NVR Wi-Fi AP. The IP address and default gateway shall be in the same network segment. Input start IP and end IP of DHCP server. The NVR device can allocate the IP address in the range you specified here. Click it to upgrade Wi-Fi AP module. 4.1.4.5 Registration After add remote device, the device can receive, storage, and manage the video streams of the remote device. You can view, browse, playback, manage several remote devices at the same time. Step 1 On the P2P interface, click Next button. Enter remote device interface. See Figure 4-22. Note There are two ways to go to Registration interface. From main menu->Setting->Camera->Registration, you can go to the registration interface. On the preview interface, right click mouse and then select Camera Registration. 39 Figure 4-22 Step 2 Set parameters Channel: It is the device channel number. If you have not added the network camera, the channel number is shown as . Status: Red circle (

) means current channel has no video, green circle (

) means current channel has video. IP address: It is to display network camera IP address. Type: There are two connection types. You can use the network to connect to the camera or use the Wi-Fi. The means current network camera connection mode is general; the means current network camera mode is hotspot. Add/Delete: Click Step 3 Add network camera. to delete the device, click to add the device to the NVR. Device search: Click the button; you can search all network cameras in the same network segment. See Figure 4-23. Double click a camera or check the camera box and then click Add button, you can add a device to the list. Note The device in the added device list is not shown in the search result column. 40 Figure 4-23 Manual Add: Click Manual Add button, you can set the corresponding network camera information and then select the channel you want to add. See Figure 4-24. Manufacturer: Please select from the dropdown list. Note Different series products may support different manufactures, please refer to the actual product. RTSP port: Input RTSP port of the remote device. The default setup is 554. IP address: Input remote device IP address. Note Skip this item if the manufacture is private or customize. HTTP port: Input HTTP port of the remote device. The default setup is 80. Note Skip this item if the manufacture is private or customize. TCP port: Input TCP port of the remote device. The default setup is 37777. User name/password: The user name and password to login the remote device. 41 Channel No.: Input channel amount or click the Connect button to get the channel amount of the remote device. Note We recommend click Connect button to get remote device channel amount, the manual add operation may result in failure if the input channel amount is not right. Remote channel No.: After getting the remote device channel amount, click Setup to select a channel. Note Click to select one or more remote channel numbers here. Channel: The local channel number you want to add. One channel name has corresponding one channel number. Decode buffer: There are three items: realtime,local,fluent. Service type: There are four types: auto/TCP/UDP/MULTICAST(ONVIF device only) Note The default connection mode is TCP if the connection protocol is private. There are four types including Auto, TCP, UDP and MULTICAST if the connection protocol is ONVIF. There are two types including TCP and UDP if the connection protocol is from the third-party. Encrypt: When the connection protocol is ONVIF, enable the encryption function and system transmits data in the encrypted mode. Note HTTPS shall be enabled in IPC to support encryption. 42 Step 4 Click OK to add the camera to the device. Figure 4-24 Note Click to change the remote device information. Click to delete remote device. 4.1.4.6 Schedule After set record schedule and snapshot schedule, the device can automatically record video and snapshot image at the specified time. 4.1.4.6.1 Schedule Record After set schedule record, device can record video file according to the period you set here. For example, the alarm record period is from 6:0018:00 Monday, device can record alarm video files during the 6:0018:00. All channels are record continuously by default. You can set customized record period and record type. Step 1 Click Next button. Enter schedule interface. See Figure 4-25. Note From main menu->Setting->Storage->Schedule->Record, you can go to the record interface. 43 Figure 4-25 Step 2 Set parameters. Channel: Please select the channel number first. You can select all if you want to set for the whole channels.

: Sync connection icon. Select icon of several dates, all checked items can be edited or together. Now the icon is shown as

.

: Click it to delete a record type from one period. Record Type: Please check the box to select corresponding record type. There are six types: Regular/MD (motion detect)/Alarm/MD&Alarm/IVS/POS. Week day: There are eight options: ranges from Saturday to Sunday and all. Holiday: It is to set holiday setup. Please note you need to go to the General interface (Main Menu->Setting->System->General) to add holiday first. Otherwise you cannot see this item. Pre-record: System can pre-record the video before the event occurs into the file. The value ranges from 1 to 30 seconds depending on the bit stream. Redundancy: System supports redundancy backup function. It allows you backup recorded file in two disks. You can highlight Redundancy button to activate this function. Please note, before enable this function, please set at least one HDD as redundant. (Main menu->Setting->Storage->HDD Manager). Please note this function is null if there is only one HDD. ANR: It is to save video to the SD card of the network camera in case the network 44 connection fails. The value ranges from 0s43200s. After the network connection resumed, the system can get the video from the SD card and there is no risk of record loss. Period setup: Click button after one date or a holiday, you can see an interface shown as in Figure 4-26.There are five record types: regular, motion detection (MD), Alarm, MD &

alarm and IVS. Please following the steps listed below to draw the period manually. Step 1 Select a channel you want to set. See Figure 4-27. Figure 4-26 Step 2 Set record type. See Figure 4-28. Figure 4-27 Figure 4-28 Note When the record type is MD (motion detect), alarm, MD&Alarm, IVS and POS, please enable the channel record function when corresponding alarm occurs. For example, when the alarm type is MD, from main menu->Setting->Event->Video Detect->Motion Detect, please select the record channel and enable record function. See Figure 4-29. When the record type is MD (motion detect), alarm, MD&Alarm, IVS and POS, refer to chapter 4.7.1 Video detect, chapter 4.7.9 Alarm Settings, chapter 4.7.3 IVS and chapter 4.7.12 POS. 45 Figure 4-29 Step 3 Please draw manually to set record period. There are six periods in one day. See Figure 4-30. Note If you have added a holiday, you can set the record period for the holiday. Step 4 Click Apply button to save schedule record settings. Figure 4-30 46 Note Please enable auto record function so that the record plan can become activated. Refer to chapter 4.1.4.6.3 Record control for detailed information. 4.1.4.6.2 Schedule Snapshot It is to set schedule snapshot period. After set schedule snapshot, device can snapshot image according to the period you set here. For example, the alarm snapshot period is from 6:0018:00 Monday, device can snapshot during the 6:00 18:00 when an alarm occurs. Step 1 Click Snapshot button, device goes to following interface. See Figure 4-31. Note From main menu->Setting->Storage->Schedule->Snapshot, you can go to the snapshot interface. Figure 4-31 Step 2 Select a channel to set schedule snapshot. Step 3 Set snapshot type as schedule. Refer to chapter 4.2.5.3 Snapshot for detailed information. Step 4 Check the box to set alarm type. See Figure 4-32. 47 Figure 4-32 Note When the record type is MD (motion detect), alarm, MD&Alarm, IVS and POS, please enable the channel snapshot function when corresponding alarm occurs. For example, when the alarm type is MD, from main menu->Setting->Event->Video Detect->Motion Detect, please select the snapshot channel and enable snapshot function. See Figure 4-33. When the snapshot type is MD (motion detect), alarm, MD&Alarm, IVS, refer to chapter 4.7.1 Video detect, chapter 4.7.9 Alarm Settings, chapter 4.7.3 IVS and chapter 4.7.12 POS. Step 5 Refer to chapter 4.1.4.6.1 to set snapshot period. Step 6 Click Apply button to save snapshot plan. Figure 4-33 Note Please enable auto snapshot function so that the snapshot plan can become activated. Refer to chapter 4.1.4.6.3 Record control for detailed information. Step 7 Click Finish button, system pops up a dialogue box. Click the OK button, the startup wizard is complete. See Figure 4-34. 48 Figure 4-34 4.1.4.6.3 Record Control Note You need to have proper rights to implement the following operations. Please make sure the HDD has been properly installed. There are three ways for you to go to record menu. Right click mouse and then select Manual->Record. In the main menu, from Setting->Storage->Record. In live viewing mode, click record button in the front panel or record button in the remote control. After set schedule record and schedule snapshot function, please enable auto record and auto snapshot function so that the device can automatically record and snapshot. System supports main stream and sub stream. There are three statuses: schedule/manual/stop. See Figure 4-35. Please highlight icon to select corresponding channel. Manual: The highest priority. After manual setup, all selected channels will begin general recording. Schedule: Channel records as you have set in recording setup (Main Menu->Setting->Storage->>Schedule) Stop: Current channel stops recording. All: Check All button after the corresponding status to enable/disable all-channel schedule/manual record or enable/disable all channels to stop record. Snapshot: Select one or more channel(s) first and then enable/disable schedule snapshot function. 49 Figure 4-35 4.1.4.6.4 Record Info After system recorded video files, go to the record info interface to view device name, start time, end time and etc. From main menu->Info-System->Record, the interface is shown as below. See Figure 4-36. 50 Figure 4-36 4.2 Camera 4.2.1 Connection After register a remote device to the NVR, you can view the video on the NVR, and manage and storage the video file. Different series products support different remote device amount. 4.2.1.1 Change IP address Step 1 From Main menu->Setting->Camera->Registration, check the box before the camera name and then click Change IP or click the Enter change IP interface. See Figure 4-37. before the camera name. Note Check the box before several cameras, change the IP addresses of several cameras at the same time. Figure 4-37 Step 2 Select IP mode. Check DHCP, there is no need to input IP address, subnet mask, and default gateway. Device automatically allocates the IP address to the camera. Check Static, and then input IP address, subnet mask, default gateway and incremental value. 51 Note If it is to change several devices IP addresses at the same time, please input incremental value. Device can add the fourth address of the IP address one by one to automatically allocate the IP addresses. If there is IP conflict when changing static IP address, device pops up IP conflict dialogue box. If batch change IP address, device automatically skips the conflicted IP and begin the allocation according to the incremental value Input remote device user name and password. Step 3 Step 4 Click OK button to save settings. After the changing operation, search again, device displays new IP address. Note When change IP addresses of several devices at the same time, make sure the cameras user name and passwords are the same. 4.2.1.2 IP Export Device can export the Added device list to your local USB device. Insert the USB device and then click the Export button. Step 1 Enter the following interface. See Figure 4-38. Figure 4-38 Step 2 Select the directory address and then click the OK button. Step 3 Device pops up a dialogue box to show the export is successful. Click OK button to exit. Note Backup encryption is enabled by default when exporting files. The file information includes IP address, port, remote channel number, manufacturer, user name and password. When you enable backup encryption, the extension name of the exported file is .backup. All the other softwares cannot open the file to edit except the NVR device. 52 When you disable backup encryption, the extension name of the exported file is .csv. It might lead to data leakage. 4.2.1.3 IP Import Step 1 Click Import button. Enter the following interface. See Figure 4-39. Step 2 Select the import file and then click the OK button. System pops up a dialogue box to remind you Figure 4-39 successfully imported. Step 3 Click OK button to exit. Note If the imported IP has conflicted with current added device, system pops up a dialogue box to remind you. You have two options:

Step 4 Click OK button, system uses the imported setup to overlay current one. Important You can edit the exported .CVS file. Do not change the file format; otherwise it may result in import failure. Does not support customized protocol import and export. The import and export device shall have the same language format. 4.2.2 Remote Device Initialization Remote device initialization can change remote device login password and IP address. Note When connect a camera to the NVR via PoE port, NVR automatically initialize the camera. The 53 camera adopts NVR current password and email information by default. When connect a camera to the NVR via PoE port after NVR upgraded to the new version, the NVR may fail to initialize the camera. Please go to the Registration interface to initialize the camera. Step 1 From main menu->Setting->Camera->Registration. Enter Registration interface. Step 2 Click Device Search and then click Uninitialized. Device displays camera(s) to be initialized. Step 3 Select a camera to be initialized and then click Initialize. Device displays password setup interface. See Figure 4-40. Note If you want to use current device password and email information, the remote device automatically uses NVR admin account information (login password and email). There is no need to set password and email. Please go to step 4. Figure 4-40 1. Cancel using current device password and email information, Enter password setting interface. See Figure 4-41. 54 Figure 4-41 2. Set camera password. The user name is admin. The password ranges from 8 to 32 digitals. It can contain letters, numbers and special characters (excluding ',",;,:,&) . The password shall contain at least two categories. Usually we recommend the strong password. STRONG PASSWORD RECOMMENDED-For your device own safety, please create a strong password of your own choosing. We also recommend you change your password periodically especially in the high security system. 3. Click Next button. Enter input email interface. See Figure 4-42. 55 Figure 4-42 4. Set email information. Email: Input an email address for reset password purpose. Note Cancel the box and then click Next or Skip if you do not want to input email information here. Step 4 Click Next button. Enter Change IP address interface. See Figure 4-43. 56 Figure 4-43 Step 5 Set camera IP address Check DHCP, there is no need to input IP address, subnet mask, and default gateway. Device automatically allocates the IP address to the camera. Check Static, and then input IP address, subnet mask, default gateway and incremental value. Note If it is to change several devices IP addresses at the same time, please input incremental value. Device can add the fourth address of the IP address one by one to automatically allocate the IP addresses. If there is IP conflict when changing static IP address, device pops up IP conflict dialogue box. If batch change IP address, device automatically skips the conflicted IP and begin the allocation according to the incremental value Step 6 Click Next button. Device begins initializing camera. See Figure 4-44. 57 Figure 4-44 Step 7 Click Finish to complete the setup. 4.2.3 Short-Cut Menu to Register Camera If you have not register a remote device to a channel, please go to the preview interface to add. Step 1 On the preview interface, Move your mouse to the center, there is an icon +. See Figure 4-45. Figure 4-45 Step 2 Click +, device pops up interface to add network camera. Refer to chapter 4.1.4.4 Registration for detailed information. 4.2.4 Image It is to set network camera parameters according to different environments. It is to get the best video effect. From main menu->setting->camera->image, you can see the image interface is shown as below. See Figure 4-46. 58 Channel: Select a channel from the dropdown list. Saturation: It is to adjust monitor window saturation. The value ranges from 0 to 100. The default value is 50. The larger the number, the strong the color is. This value has no effect on the general brightness of the whole video. The video color may become too strong if the value is too high. For the grey part of the video, the distortion may occur if the white balance is not accurate. Please note the video may not be attractive if the value is too low. The recommended value ranges from 40 to 60. Brightness: It is to adjust monitor window bright. The value ranges from 0 to 100. The default value is 50. The larger the number is, the bright the video is. When you input the value here, the bright section and the dark section of the video will be adjusted accordingly. You can use this function when the whole video is too dark or too bright. Please note the video may become hazy if the value is too high. The recommended value ranges from 40 to 60. Contrast: It is to adjust monitor window contrast. The value ranges from 0 to 100. The default value is 50. The larger the number is, the higher the contrast is. You can use this function when the whole video bright is OK but the contrast is not proper. Please note the video may become hazy if the value is too low. If this value is too high, the dark section may lack brightness while the bright section may over exposure .The recommended value ranges from 40 to 60. Auto Iris: It is for the device of the auto lens. You can check the box before ON to enable this function. The auto iris may change if the light becomes different. When you disable this function, the iris is at the max. System does not add the auto iris function in the exposure control. This function is on by default. Mirror: It is to switch video up and bottom limit. This function is disabled by default. Flip: It is to switch video left and right limit. This function is disabled by default. BLC: It includes several options: BLC/WDR/HLC/OFF. BLC: The device auto exposures according to the environments situation so that the darkest area of the video is cleared WDR: For the WDR scene, this function can lower the high bright section and enhance the brightness of the low bright section. So that you can view these two sections clearly at the same time. The value ranges from 1 to 100. When you switch the camera from no-WDR mode to the WDR mode, system may lose several seconds record video. HLC: After you enabled HLC function, the device can lower the brightness of the brightest section according to the HLC control level. It can reduce the area of the halo and lower the brightness of the whole video. OFF: It is to disable the BLC function. Please note this function is disabled by default. Profile: It is to set the white balance mode. It has effect on the general hue of the video. This function is on by default. You can select the different scene mode such as auto, sunny, cloudy, home, office, night, disable and etc to adjust the video to the best quality. Auto: The auto white balance is on. System can auto compensate the color temperature to make sure the vide color is proper. Sunny: The threshold of the white balance is in the sunny mode. Night: The threshold of the white balance is in the night mode. Customized: You can set the gain of the red/blue channel. The value reneges from 0 to 100. Day/night. It is to set device color and the B/W mode switch. The default setup is auto. Color: Device outputs the color video. Auto: Device auto select to output the color or the B/W video according to the device feature (The general bright of the video or there is IR light or not.) B/W: The device outputs the black and white video. 59 Sensor: It is to set when there is peripheral connected IR light. Please note some non-IR series product support sensor input function. Figure 4-46 4.2.5 Encode It is to set video encode parameters such as video bit rates, video overlay, snapshot settings. 4.2.5.1 Encode It is to set IPC encode mode, resolution, bit stream type and etc. Note Some series products support three streams: main stream, sub stream 1, sub stream 2. The sub stream maximally supports 1080P. From Main menu->Setting->System->Encode, you can see the following interface. See Figure 4-47. Channel: Select the channel you want. Type: It is to set device bit stream type. For main stream, there are three options: regular/motion detect/alarm. The sub stream supports regular bit streams only. The active control frame function (ACF) can record in different frame rates. For example, you can use high frame rate to record important events, record scheduled event in lower frame rate. Set different frame rates for different record events. Note Some series products do not support motion detect bit streams and alarm streams. Compression: Video encode mode. H.264: Main Profile encode mode. 60 H.264H: High Profile encode mode. H.264B: Baseline Profile encode mode. H.265: Main Profile encode mode. MJPEG: System needs high bit streams to guarantee video definition. Use the recommended max bit stream value to get the better video effect. Smart Codec: This function is to reduce bit streams. Note Some series products support smart codec function. After changing smart code, please reboot network camera and some network camera functions

(such as IVS, ROI, SVC, lobby mode and etc.) becomes null. Please think twice before the operation. Resolution: The resolution here refers to the capability of the network camera. Note Different series products support different resolutions. Please refer to the actual interface for detailed information. Frame rate (FPS): The video frame amount displayed in each second. The higher the frame rate is, the clearer and more fluent the video is. The frame rate may vary depending on the resolution. Bit rate type: System supports two types: CBR and VBR. Main stream: It is to set frame rate to change video quality. The higher the frame rate is, the better the video quality is. The referenced bit rate is the recommended value. Sub stream: In CBR mode, the bit stream is near the specified value. In VBR mode, the video quality changes according to the bit stream value. But its max value is near the specified value. Reference bit rate: The reference bit rate depends on the resolution and frame rate you set. Video/audio: You can enable or disable the video/audio. The main stream is enabled by default. After enable the audio function, the record file is composite file consisting of the video and audio. For the sub stream 1, please enable video first and then enable audio function. Audio format: Set audio encode format. Note Different series products support different audio encode mode. Please refer to the actual interface for detailed information. Sampling rate: Audio sampling rate refers to the sampling amount within 1 second. The higher the value is, the better the audio is. The default setup is 8K. Copy: After you complete the setup, you can click Copy button to copy current setup to other channel(s). You can see an interface is shown as in Figure 4-50. You can see current channel number is grey. Please check the number to select the channel or you can check the box ALL. Please click the OK button in Figure 4-50 and Figure 4-48 respectively to complete the setup. Please note, once you check the All box, you set same encode setup for all channels. Audio/video enable box, overlay button and the copy button is shield. Please highlight icon to select the corresponding function. 61 Figure 4-47 4.2.5.2 Overlay Click overlay button, you can see an interface is shown in Figure 4-48. Cover area: Here is for you to cover area section. You can drag you mouse to set proper section size. In one channel video, system max supports 4 zones in one channel. You can set with Fn button or direction buttons. Preview/monitor: The cover area has two types. Preview and Monitor. Preview means the privacy mask zone cannot be viewed by user when system is in preview status. Monitor means the privacy mask zone cannot be view by the user when system is in monitor status. Time display: You can select system displays time or not when you playback. Please click set button and then drag the title to the corresponding position in the screen. Channel display: You can select system displays channel number or not when you playback. Please click set button and then drag the title to the corresponding position in the screen. 62 Figure 4-48 4.2.5.3 Snapshot Here you can set snapshot mode, picture size, quality and frequency. See Figure 4-49. Snapshot mode: There are two modes: regular and trigger. If you set regular mode, you need to set snapshot frequency. If you set trigger snapshot, you need to set snapshot activation operation. Image size: Here you can set snapshot picture size. Image quality: Here you can set snapshot quality. The value ranges from 1 to 6. Interval: It is for you to set timing (schedule) snapshot interval. 63 Figure 4-49 Figure 4-50 4.2.6 Channel Name From main menu->Setting->Camera-Channel name, you can see an interface shown as in Figure 4-51. It is to modify channel name. It max supports 63-character. Please note you can only modify the channel name of the connected network camera. 64 Figure 4-51 4.2.7 Remote Upgrade It is to upgrade the connected network camera firmware. It includes online upgrade and file upgrade. From main menu->setting->camera->remote, the interface is shown as below. See Figure 4-52. Figure 4-52 65 Online Upgrade Step 1 Select a remote device and then click the Detect button on the right side, or check a box to select a remote device and then click Manual Check. System detects the new version on the cloud. Step 2 Select a remote device that has new version and then click online upgrade. After successful operation, system pops up upgrade successful dialogue box. File upgrade Step 1 Select a channel and then click File upgrade. Step 2 Select upgrade file on the pop-up interface. Step 3 Select the upgrade file and then click OK button. After successful operation, system pops up upgrade successful dialogue box. Note If there are too much remote devices, select device type from the drop-down list to search the remote device you desire. 4.2.8 Remote Device Info 4.2.8.1 Device Status Here you can view the IPC status of the corresponding channel such as motion detect, video loss, tampering, alarm and etc. See Figure 4-53. IPC status:

event from current front-end.

: Front-end does not support.

: Front-end supports.

: There is alarm Connection status:

Refresh: Click it to get latest front-end channel status.

: Connection succeeded.

: Connection failed. 66 Figure 4-53 4.2.8.2 Firmware It is to view channel, IP address, manufacturer, type, system version, SN, video input, audio input, external alarm and etc. See Figure 4-54. Figure 4-54 67 4.3 Preview After device booted up, the system is in multiple-channel display mode. See Figure 4-55.Please note the displayed window amount may vary. The following figure is for reference only. Please refer to chapter 1.3 Specifications for the window-amount your product supported. Figure 4-55 4.3.1 Preview If you want to change system date and time, you can refer to general settings (Main Menu->Setting->System->General). If you want to modify the channel name, please refer to the display settings (Main Menu->Camera->CAM name) Please refer to the following sheet for detailed information. SN Icon Function 1 2 3 4 5 When current channel is recording, system displays this icon. When motion detection alarm occurs, system displays this icon. When video loss alarm occurs, system displays this icon. When current channel is in monitor lock status, system displays this icon. When the device remotely connects Wi-Fi IPC, this icon is displayed on the screen of the corresponding channel. Only some devices support this function. Tips Preview drag: If you want to change position of channel 1 and channel 2 when you are previewing, you can left click mouse in the channel 1 and then drag to channel 2, release mouse you can switch channel 1 and channel 2 positions. Use mouse middle button to control window split: You can use mouse middle button to switch window split amount. 68 4.3.2 Navigation bar On the preview interface, left click mouse, you can view the navigation bar. See Figure 4-56 or Figure 4-57. Note Different series products may display different navigation bar icons. Refer to the actual product for detailed information. Go to the Main menu->Setting->System->General to enable navigation bar function; otherwise you cannot see the following interface. Figure 4-56 Figure 4-57 4.3.2.1 Main Menu to go to the main menu interface. Click button 4.3.2.2 Dual-screen operation Important This function is for some series only. Click navigation bar for screen 2. to select screen 2, you can view an interface shown as below. See Figure 4-58. It is a Figure 4-58 Click any screen split mode; HDMI2 screen can display corresponding screens. Now you can control two screens. See Figure 4-59. Figure 4-59 Note Screen 2 function is null if tour is in process. Please disable tour function first, Right now, the screen 2 operation can only be realized on the navigation bard. The operations on the 69 right-click menu are for screen 1 only. 4.3.2.3 Output Screen Click 4.3.2.4 Previous screen/next screen to select corresponding window-split mode and output channels. to go back to the previous screen, click Click 4.3.2.5 Tour to go to the next screen. Click button to enable tour, the icon becomes

, you can see the tour is in process. Note Close the tour or the triggered tour operation has cancelled, device restore the previous preview video. 4.3.2.6 PTZ

, system goes to the PTZ control interface. Please refer to chapter 4.4.2 PTZ for detailed Click information. 4.3.2.7 Color

, system goes to the color interface. Please refer to chapter 4.3.6.1 Color for detailed Click button information. Please make sure system is in one-channel mode. 4.3.2.8 Image to go to the image interface. Please refer to chapter 4.2.4 Image for detailed information. Click Please make sure system is in one-channel mode. 4.3.2.9 Search

, system goes to search interface. Please refer to chapter 4.6.2 Search for detailed Click button information. 4.3.2.10 Broadcast to go to broadcast interface. Select a group name and then click Click broadcast. Please refer to chapter 4.10.5 Broadcast for detailed information. 4.3.2.11 Alarm Status to begin

, system goes to alarm status interface. It is to view device status and channel status. Click button Please refer to chapter 4.10.2.3.1 Alarm status for detailed information. 4.3.2.12 Channel Info Click button corresponding channel. See Figure 4-60.

, system goes to the channel information setup interface. It is to view information of the 70 4.3.2.13 Registration Figure 4-60

, system goes to the registration interface. Please refer to chapter 4.1.4.6.3 Registration for Click detailed information. 4.3.2.14 Network

, system goes to the network interface. It is to set network IP address, default gateway and etc. Click Please refer to chapter 4.8 Network for detailed information. 4.3.2.15 HDD Manager

, system goes to the HDD manager interface. It is to view and manage HDD information. Click Please refer to chapter 4.9.1 HDD manager for detailed information. 4.3.2.16 USB Manager Click

, system goes to the USB Manager interface. It is to view USB information, backup and update. Please refer to chapter 4.10.8.1 File backup, chapter 4.10.8.3 Backup log, chapter4.10.8.2 Import/export, and chapter 4.10.10 Upgrade for detailed information. 4.3.3 Preview Control Interface Move you mouse to the top center of the video of current channel, you can see system pops up the preview control interface. See Figure 4-61. If your mouse stays in this area for more than 6 seconds and has no operation, the control bar automatically hides. 71 Figure 4-61 Instant playback 1) It is to playback the previous 5-60 minutes record of current channel. Please go to the Main menu->Setting->->System->General to set real-time playback time. System may pop up a dialogue box if there is no such record in current channel. 2) Digital zoom It is to zoom in specified zone of current channel. It supports zoom in function of multiple-channel.

, the button is shown as Click button There are two ways for you to zoom in. Drag the mouse to select a zone, you can view an interface show as Figure 4-62. Figure 4-62 Put the middle button at the center of the zone you want to zoom in, and move the mouse, you can view an interface shown as in Figure 4-63. 72 Figure 4-63 Right click mouse to cancel zoom and go back to the original interface. 3) Manual record function It is to back up the video of current channel to the USB device. System cannot backup the video of multiple-channel at the same time.

, system begins recording. Click it again, system stops recoridng. You can find the record Click button file on the flash disk. 4) Manual Snapshot to snapshot 1-5 times. The snapshot file is saved on the USB device or HDD. You can go to Click the Search interface (chapter 4.5) to view. 5) Bidirectional talk If the connected front-end device supports bidirectional talk function, you can click this button. Click to start bidirectional talk function the icon now is shown as button bidirectional talk buttons of digital channel becomes null too. Now the rest Click again, you can cancel bidirectional talk and the bidirectional talk buttons of other digital

. channels become as 6) Registration Shortcut menu. Click it to go to the registration interface to add/delete remote device or view its corresponding information. Please refer to chapter4.2.2 for detailed information. 7) Switch bit streams to switch the bit stream type of the main stream and sub stream. Click M: Main stream. Its bit streams are big and definition is high. It occupies large network bandwidth suitable for video wall surveillance, storage and etc. S: Sub stream. Its definition is low but occupies small network bandwidth. It is suitable for general surveillance, remote connection and etc. Some series products support two sub streams (S1, S2). Refer to chapter 4.2.5.1 Encode for detailed information. 4.3.4 Right Click Menu 73 After you logged in the device, right click mouse, you can see the short cut menu. Please see Figure 4-64 or Figure 4-65. Window split mode: You can select window amount and then select channels. Edit view (Sequence): Change channel display sequence on the preview window. Customized screen: Set customized screen split mode. PTZ: Click it to go to PTZ interface. Fisheye (optional): It is to realize fish eye operation. Auto focus: It is to set auto focus function. Please make sure the connected network camera supports this function. Color setting: Set video corresponding information. Search: Click it to go to Search interface to search and playback a record file. Record control: Enable/disable record channel. Alarm output: It is to set alarm output mode. Camera registration: Search and add a remote device. Alarm output: Generate alarm output signal manually. Main menu: Go to system main menu interface. Tips:

Right click mouse to go back to the previous interface. Figure 4-64 74 Figure 4-65 4.3.5 Edit View (Sequence) It is to set customized view layout. Warning layout The preview menu->Setting->General->Default). Step 1 On the preview interface, right click mouse and then click Edit view. restores default channel layout after Default operation.

(Main Enter edit view interface. See Figure 4-66. Note Enter edit view interface, device automatically switches to the max split amount mode. The channel list on the edit view interface displays the added camera channel number and means camera is online. channel name. In case the channel amount has exceeded the device max split amount, the edit view interface can display the max screen number amount and current screen number. In Figure means camera is offline. 4-66, click or

, switch the video from other channel. 75 Figure 4-66 Step 2 On the edit view interface, drag the channel to the desired window, or drag on the preview window to switch the position. Check the channel number at the right bottom corner to view the current channel sequence. See Figure 4-67. 76 Step 3 Click Apply to save current channel sequence. Figure 4-67 After you change the channel sequence, click Cancel button or right click mouse, device pops up the dialogue box. See Figure 4-68. Click OK to save current settings. Click Cancel to exit without saving the settings. Figure 4-68 4.3.6 Preview Display Effect Setup 4.3.6.1 Video Color Here you can set hue, brightness, contrast, saturation, gain, white level, color mode and etc. See Figure 4-69. 77 Please refer to the following sheet for detailed information. Figure 4-69 Item Period Effective Time Sharpness Brightness Contrast Saturation Note There are two periods in one day. You can set different sharpness, brightness, and contrast setup for different periods. Check the box here to enable this function and then set period time. The value here is to adjust the edge of the video. The value ranges from 0 to 100. The larger the value is, the clear the edge is and vice versa. Please note there is noise if the value here is too high. The default value is 50 and the recommended value ranges from 40 to 60. It is to adjust monitor window bright. The value ranges from 0 to 100. The default value is 50. The larger the number, the bright the video is. When you input the value here, the bright section and the dark section of the video will be adjusted accordingly. You can use this function when the whole video is too dark or too bright. Please note the video may become hazy if the value is too high. The recommended value ranges from 40 to 60. It is to adjust monitor window contrast. The value ranges from 0 to 100. The default value is 50. The larger the number, the higher the contrast is. You can use this function when the whole video bright is OK but the contrast is not proper. Please note the video may become hazy if the value is too low. If this value is too high, the dark section may lack brightness while the bright section may over exposure .The recommended value ranges from 40 to 60. It is to adjust monitor window saturation. The value ranges from 78 Item Gain Color mode Note 0 to 100. The default value is 50. The larger the number, the strong the color is. This value has no effect on the general brightness of the whole video. The video color may become too strong if the value is too high. For the grey part of the video, the distortion may occur if the white balance is not accurate. Please note the video may not be attractive if the value is too low. The recommended value ranges from 40 to 60. The gain adjust is to set the gain value. The default value may vary due to different device models. The smaller the value, the low the noise. But the brightness is also too low in the dark environments. It can enhance the video brightness if the value is high. But the video noise may become too clear. It includes several modes such as standard, color, bright, gentle. Select a color mode, the sharpness, brightness, contrast and etc can automatically switch to corresponding setup. 4.3.6.2 Display From Main Menu->Setting->System->Display->Display, you can go to the following interface. See Figure 4-70. Here you can set menu and video preview effect. All you operation here does not affect the record file and playback effect. Figure 4-70 Now you can set corresponding information. 79 Display the intelligent rule(s): Check the box to enable IVS function, system can display IVS rule on the preview interface. Please note this function is for some series only. Resolution: There are five options: 12801024 (Default), 1280720, 19201080, 1024768 and 38402160. Please note the system needs to reboot to activate current setup. Please note 38402160 is for some series only. VGA+HDMI2: It is for dual-screen operation. Please select from the dropdown list according to your actual situation. Click Apply button, system needs to restart to activate new setup. For example, 32+4 means for VGA, system max supports 32-window split and for HDMI2, system max supports 4-window split. Please note this function is for some series only. Transparency: Here is for you to adjust menu transparency. The higher the value is, the better transparent the menu is. Time display: You can select to display time or not when system is playback. Channel display: You can select to channel name or not when system is playback. Image enhance: Check the box; you can optimize the margin of the preview video. Original scale: Check the box here to select a corresponding channel; it can restore video original scale. Click OK button to save current setup. 4.3.6.3 TV adjust Note Some series product supports TV adjust function. This function is disabled by default. From Main Menu->Setting->System->Display->TV adjust; you can go to the following interface. See Figure 4-70. Here you can set margins and brightness. Figure 4-71 4.3.6.4 Preview Tour Parameters 80 Set preview display mode, channel display sequence and tour setup. Set preview display mode: On the preview interface, right click mouse, you can view right-click menu. Now you can select preview window amount and channel. Set channel display mode: On the preview interface, if you want to change channel 1 and channel 16 position, please right click channel 1 video window and then drag to the channel 16 video window, release button, you can change channel 1 and channel 16 position. Tour setup: Here you can set preview window channel display mode and interval. Please follow the steps listed below. From Main menu->Setting->System->Display->Tour, you can see an interface shown as in Figure 4-72. Here you can set tour parameter. Enable tour: Check the box here to enable tour function. The general tour supports all types of window split mode. Interval: Input proper interval value here. The value ranges from 1-120 seconds. Motion tour type: System support 1/8-window tour. Please note you need to go to the main menu->Setting->Event->Video detect->Motion detect to enable tour function. Alarm tour type: System support 1/8-window tour. Please note you need to go to the main menu->Setting->Event->Alarm to enable tour function. Window split: It is to set window split mode. Tips Figure 4-72 to enable/disable tour.

/

On the navigation bar, click Click Save button to save current setup. 4.3.6.5 Customized split It is to set customized video split mode. 81 Note This function is for some series products. Please refer to the actual product for detailed information. Device max supports 5 customized videos. From Main menu->Setting->System->Display->Custom split, you can see an interface shown as in Figure 4-73. Figure 4-73 and then click Click In regular mode, drag the mouse in the preview frame; you can merge several small windows to one window so that you can get you desired split mode. After the setup, the selected window has the red frame. See Figure 4-74. to select basic mode 82 Figure 4-74 Select the merging window, the frame is red; you can click mode. Click Save to exit. After the setup, you can go to the preview window, right click mouse and then select custom split. See Figure 4-75. to cancel the merge to restore regular Figure 4-75 83 4.3.7 Fisheye (Optional) Please note this function is for some series only. 4.3.7.1 Fisheye de-warp during preview interface The fisheye camera (panoramic camera) has wide video of angle but its video is serious distorted. The de-warp function can present the proper and vivid video suitable for human eyes. On the preview interface, select fisheye channel and then right click mouse, you can select fish eye. See Figure 4-76. Figure 4-76 Now you can see an interface shown as in Figure 4-77. You can set fish eye installation mode and display mode. Note For the non-fish eye channel, system pops up dialogue box to remind you it is not a fish eye channel and does not support de-warp function. If system resources are insufficient, system pops up the corresponding dialogue box too. 84 Figure 4-77 There are three installation modes: ceiling mount/wall mount/ground mount. The different installations modes have different de-warp modes. Please refer to the following sheet for detailed information. Installation modes Icon Note 360panorama original view Ceiling mount Ground mount Wall mount 1 de-warp window+1 panorama stretching 2 panorama stretching view 1 360 panorama view+3 de-warp windows 1 360panorama view+4 de-warp windows 4 de-warp windows+1 panorama stretching 1 360 panorama view+8 de-warp windows 360panorama original view Panorama stretching 85

1 panorama unfolding view+3 de-warp windows 1 panorama unfolding view +4 de warp windows 1 panorama unfolding view +8 de warp windows Figure 4-78 In Figure 4-78, you can adjust the color pane on the left pane or use your mouse to change the position of the small images on the right pane to realize fish eye de-warp. 4.3.7.2 Fish eye de-warp during playback Step 1 On the main menu, click search button. Step 2 Select 1-window playback mode and corresponding fish eye channel, click to play. Step 3 Right click the

, you can go to the de-warp playback interface. For detailed information, please refer to chapter 4.3.7.1 fisheye de-warp during preview. 4.4 PTZ Note Before you control the PTZ, please make sure the PTZ decoder and the NVR network connection is OK and the corresponding settings are right. 4.4.1 PTZ Settings Cable Connection Please follow the procedures below to go on cable connection Connect the dome RS485 port to NVR RS485 port. Connect dome video output cable to NVR video input port. Connect power adapter to the dome. In the main menu, from Setting->System->PTZ, you can see an interface is shown as in Figure 4-79. Here you can set the following items:

Channel: Select the current camera channel. 86 PTZ type: There are two types: local/remote. Please select local mode if you are connect RS485 cable to connect to the Speed dome (PTZ). Please select remote mode if you are connecting to the network PTZ camera. Protocol: Select corresponding PTZ protocol(such as PELCOD) Address: Default address is 1. Baud rate: Select corresponding baud rate. Default value is 9600. Data bit: Select corresponding data bits. Default value is 8. Stop bit: Select corresponding stop bits. Default value is 1. Parity: There are three options: odd/even/none. Default setup is none. If you are connecting to network PTZ, the PTZ type shall be remote. See Figure 4-80. Figure 4-79 87 Figure 4-80 4.4.2 PTZ Control After completing all the setting please click save button. Right click mouse (click Fn Button in the front panel or click Fn key in the remote control). The interface is shown as in Figure 4-81. Please note you can only go to the PTZ control interface when you are in 1-window display mode. Figure 4-81 The PTZ setup is shown as in See Figure 4-82. Please note the commend name is grey once device does not support this function. 88 The PTZ operation is only valid in one-window mode. Here you can control PTZ direction, speed, zoom, focus, iris, preset, tour, scan, pattern aux function, light and wiper, rotation and etc. Speed is to control PTZ movement speed. The value ranges from 1 to 8.The speed 8 is faster than speed 1. You can use the remote control to click the small keyboard to set. and You can click The PTZ rotation supports 8 directions. If you are using direction buttons on the front panel, there are only four directions: up/down/left/right. of the zoom, focus and iris to zoom in/out, definition and brightness. Figure 4-82 In the middle of the eight direction arrows, there is a 3D intelligent positioning key. See Figure 4-83. Please make sure your protocol supports this function and you need to use mouse to control. Click this key, system goes back to the single screen mode. Drag the mouse in the screen to adjust section size. The dragged zone supports 4X to 16X speeds. It can realize PTZ automatically. The smaller zone you dragged, the higher the speed. Figure 4-83 Name Function function key Shortcut key Function key function Zoom Focus Iris Near Near close Far Far Open Shortcut key In Figure 4-82, click Figure 4-84. to open the menu, you can set preset, tour, pattern, scan and etc. See 89 Figure 4-84 Please refer to the following sheet for detailed information. Please note the above interface may vary due to different protocols. The button is grey and cannot be selected once the current function is null. Right click mouse or click the ESC button at the front panel to go back to the Figure 4-82. Icon Function Preset Icon Function Flip Tour Pattern Scan Rotate Reset Aux on-off Aux button Go to menu 4.4.2.1 PTZ Function Setup Click

, you can go to the following interface to set preset, tour, pattern, and scan. See Figure 4-85. Figure 4-85 Preset Setup In Figure 4-85, click preset button and use eight direction arrows to adjust camera to the proper position. 90 The interface is shown as in Figure 4-86. Click Set button and then input preset number. Click Set button to save current preset. Figure 4-86 Tour Setup In Figure 4-85, click tour button. Input tour value and preset No. Click Add preset button to add current preset to the tour. See Figure 4-87. Tips Repeat the above steps to add more presets to the tour. Click Del preset button to remove it from the tour. Please note some protocols do not support delete preset function. Figure 4-87 Pattern Setup In Figure 4-85, click Pattern button and input pattern number. Click Begin button to start direction operation. Or you can go back to Figure 4-82 to operate zoom/focus/iris/direction operation. In Figure 4-85, click End button. 91 Figure 4-88 Scan Setup In Figure 4-85, click Scan button. Use direction buttons to set camera left limit and then click Left button. Use direction buttons to set camera right limit and then click Right button. Now the scan setup process is complete. Figure 4-89 4.4.2.2 Call PTZ Function Call Preset In Figure 4-84, input preset value and then click Call Pattern In Figure 4-84, input pattern value and then click call. Call Tour to call a preset. Click again to stop call. to call a pattern. Click again to stop In Figure 4-84, input tour value and then click to call a tour. Click again to stop call. 92 Call Scan In Figure 4-84, input Scan value and then click Rotate to call a tour. Click again to stop call. to enable the camera to rotate. In Figure 4-84, click System supports preset, tour, pattern, scan, rotate, light and etc function. Note:

Preset, tour and pattern all need the value to be the control parameters. You can define it as you require. You need to refer to your camera users manual for Aux definition. In some cases, it can be used for special process. Aux Click number is corresponding to the aux on-off button of the decoder. See Figure 4-90.

, system goes to the following interface. The options here are defined by the protocol. The aux Figure 4-90 4.5 Record File Device adopts 24-hour continuous record by default. It supports customized record period and record type. Refer to chapter 4.1.4.6 Schedule for detailed information. 4.6 Playback and Search 4.6.1 Please refer to chapter 4.3.2 for real-time playback information. 4.6.2 Search Interface From Main menu->Search, or on the preview interface right click mouse and then select search item, you can go to the following interface. See Figure 4-91 or Figure 4-92. Instant Playback 93 Figure 4-91 Figure 4-92 94 Please refer to the following sheet for more information. SN Name 1 Display window 2 Search type 3 Calendar Here is to display the searched picture or file. Support 1/4/9/16-window playback. (It depends on the product channel Function amount). Here you can select to search the picture or the recorded file. You can select to play from the read-write HDD, from peripheral device or from redundancy HDD. Before you select to play from the peripheral device, please connect the corresponding peripheral device. You can view all record files of the root directory of the peripheral device. Click the Browse button; you can select the file you want to play. Important Redundancy HDD does not support picture backup function, but it supports picture playback function. You can select to play from redundancy HDD if there are pictures on the redundancy HDD. The blue highlighted date means there is picture or file. Otherwise, there is no picture or file. corresponding record file trace in the time bar. Playback mode:1/4/9/16. (It may vary due to different series.) In any play mode, click the date you want to see, you can see the In 1-window playback mode: you can select 1-X channels (X depends on the product channel amount). In 4-window playback mode: you can select 4 channels according to your requirement. In 9-window playback mode, you can switch between 1-8, 9-16 and etc channels. In 16-window playback mode, you can switch between1-16, 17-32 and etc channels. The time bar will change once you modify the playback mode or the channel option. The card number search interface is shown as below. Here you can view card number/field setup bar. You can implement advanced search. Current series product supports this function. You can search when it is in 1-channel playback mode. Click it, system can filter all human faces and generate human face list. Double click the file; system begins playback the record or image of the corresponding human face. Click it to go to mark file list interface. You can view all mark information of current channel by time. Please refer to chapter 4.6.4 for detailed information. Please note only the product of this icon supports mark function. Playback mode and channel selection pane. Card number search Face list Mark file list button 4 5 6 7 95 8 9 list File switch button Double click it, you can view the picture/record file list of current day. The file list is to display the first channel of the record file. The system can display max 128 files in one time. Use the and or the mouse to view the file. Select one item, and then double click the mouse or click the ENTER button to playback. You can input the period in the following interface to begin accurate search. File type:Rregular record Aexternal alarm recordMMotion detect record. Lock file. Click the file you want to lock and click the button file you locked will not be overwritten. to lock. The Search locked file: Click the button to view the locked file. Playback control pane.

/

Play/Pause There are three ways for you to begin playback. The play button Double click the valid period of the time bar. Double click the item in the file list. In slow play mode, click it to switch between play/pause. Stop Backward play In normal play mode, left click the button, the file begins backward play. Click it again to pause current play. In backward play mode, click / to restore normal play. In playback mode, click it to play the next or the previous section. You can click continuously when you are watching the files from the same channel. In normal play mode, when you pause current play, you can click and to begin frame by frame playback. In frame by frame playback mode, click / to restore normal playback. Slow play In playback mode, click it to realize various slow play modes such as slow play 1, slow play 2, and etc. Fast forward In playback mode, click to realize various fast play modes such as fast play 1,fast play 2 and etc.

/

Note: The actual play speed has relationship with the software version. Smart search The volume of the playback 96 Click the snapshot button in the full-screen mode, the system can snapshot 1 picture. System supports custom snap picture saved path. Please connect the peripheral device first, click snap button on the full-screen mode, you can select or create path. Click Start button, the snapshot picture can be saved to the specified path. Mark button. Please note this function is for some series product only. Please make sure there is a mark button in the playback control pane. You can refer to chapter 4.6.4 for detailed information. In 1-channel playback mode, click it to enable/disable display IVS rule information on the video. It is to display the record type and its period in current search criteria. In 4-window playback mode, there are corresponding four time bars. In other Time bar playback mode, there is only one time bar. Use the mouse to click one point of the color zone in the time bar, system begins playback. The time bar is beginning with 0 o'clock when you are setting the configuration. The time bar zooms in the period of the current playback time when you are playing the file. The green color stands for the regular record file. The red color stands for the external alarm record file. The yellow stands for the motion detect record file. Time bar unit The option includes:

, . The smaller the unit, the larger the zoom rate. You can accurately set the time in the time bar to playback the record. The time bar is beginning with 0 o'clock when you are setting the configuration. The time bar zooms in the period of the current playback time when you are playing the file. Backup Select the file(s) you want to backup from the file list. You can check from the list. Then click the backup button, now you can see the backup menu. System supports customized path setup. After select or create new folder, click the Start button to begin the backup operation. The record file(s) will be saved in the specified folder. Check the file again you can cancel current selection. System max supports to display 32 files from one channel. After you clip on record file, click Backup button you can save it. For one device, if there is a backup in process, you cannot start a new backup operation. Clip It is to edit the file. Please click to play the file you want to edit. Select clip start time on the time bar and then Click to start clip. 97 10 11 12 13 Select clip stop time on the time bar and then click to stop clip.

, system pops up file backup dialogue box for you to save. Click Please note:

Clip function is for one-channel mode/multiple-channel mode. System max supports 1024 files backup at the same time. You cannot operate clip operation if there is any file has been checked in the file list. In any play mode, the time bar will change once you modify the search type. 14 Record type Other Functions Motion detection search When system is playing, you can select a zone in the window to begin motion detection search. Click the motion detect button to begin play. Once the motion detect play has begun, click button again will terminate current motion detect file play. There is no motion detect zone by default. If you select to play other file in the file list, system switches to motion detect play of other file. During the motion detect play process, you cannot implement operations such as change time bar, begin backward playback or frame by frame playback. When playing the file, click the number button, system can switch to the same period of the corresponding channel to play. 15 16 Other channel synchroni zation switch to play when playback 17 Digital zoom When the system is in full-screen playback mode, left click the mouse in the screen. Drag your mouse in the screen to select a section and then left click mouse to realize digital zoom. You can right click mouse to exit. 18 Manually switch channel when playback Note During the file playback process, you can switch to other channel via the dropdown list or rolling the mouse. This function is null if there is no record file or system is in smart search process. All the operations here (such as playback speed, channel, time and progress) have relationship with hardware version. Some series NVRs do not support some functions or playback speeds. 4.6.2.1 Playback Control The playback control interface is shown as below. See !. 98 Please refer to the following sheet for more information. Figure 4-93 Icon Function Play/Pause In slow play mode, click it to switch between play/pause. Backward play In normal play mode, left click the button, the file begins backward play. Click it again to pause current play. In backward play mode, click Display previous frame/next frame. or to restore normal play. When pause the normal playback file, click or to playback frame by frame. In frame by frame playback mode, click normal playback mode. or to resume Slow play In playback mode, click it to realize various slow play modes such as slow play 1, slow play 2, and etc. Fast forward In playback mode, click to realize various fast play modes such as fast play 1,fast play 2 and etc. Adjust the volume of the playback Smart search . You can refer to chapter 4.6.3 for detailed information. Click the snapshot button in the full-screen mode, the system can snapshot 1 picture. System supports custom snap picture saved path. Please connect the peripheral device first, click snap button on the full-screen mode, you can select or create path. Click Start button, the snapshot picture can be saved to the specified path. Mark button. Please note this function is for some series product only. Please make sure there is a mark button in the playback control pane. You can refer to chapter 4.6.4 for detailed information. Display/hide POS information. In 1-channel playback mode, you can click it to display/hide POS information on the video. 99 Icon Function Note This function is for some series only. In 1-channel playback mode, click it to enable/disable display IVS rule information on the video. 4.6.2.2 Clip This function allows you to clip some footages to a new file and then save to the USB device. See !

. Please follow the steps listed below. Step 1 Select a record first and then click to playback. Step 2 Select a time at the time bar and then click to start clip, Step 3 Select a time at the time bar and then click to stop clip, Step 4 Click

, system pops up dialogue box to save the clip file. Figure 4-94 Note Clip function is for one-channel/multiple-channel. Max save 1024 files at the same time. This function is not for the file already checked in the file list. 4.6.2.3 Record Backup This function is to backup files you checked in the file list, or the file you just clip. Click

, enter the following interface. See Figure 4-95. 100 Figure 4-95 Click Backup to begin the process. 4.6.3 Smart Search Playback Note This function is for some series product only. During playback process, it can analyze the motion detect zone in the scene and give the analysis result. This menu->Setting->Event->Video detect->Motion detect). Please follow the steps listed below. that already enabled motion detect for channel function function

(main is Step 1 Select a channel to playback video and then click

. You can view the grids on the playback video. Note This function is for one-channel playback mode. If you are in multiple-channel playback mode, double click a channel first to switch to one-channel playback mode. Step 2 Left click mouse and then drag to select smart search zones(22*18PAL, 22*15NTSC). Step 3 Click to go to smart search and playback. System is going to playback all motion detect record footages. Step 4 Click again to stop smart search function. 101 4.6.4 Mark Playback Please make sure your purchased device support this function. You can use this function only if you can see the mark playback icon on the Search interface (Figure 4-91 or Figure 4-92). When you are playback record, you can mark the record when there is important information. After playback, you can use time or the mark key words to search corresponding record and then play. It is very easy for you to get the important video information. Add Mark When system is playback, click Mark button

, you can go to the following interface. See Figure 4-96. Playback Mark Figure 4-96 During 1-window playback mode, click mark file list button to mark file list interface. Double click one mark file, you can begin playback from the mark time. Play before mark time Here you can set to begin playback from previous N seconds of the mark time. in Figure 4-91 or Figure 4-92, you can go Note Usually, system can playbacks previous N seconds record if there is such kind of record file. Otherwise, system playbacks from the previous X seconds when there is such as kind of record. Mark Manager Click the mark manager button on the Search interface (Figure 4-91 or Figure 4-92); you can go to Mark Manager interface. See Figure 4-97. System can manage all the record mark information of current channel by default. You can view all mark information of current channel by time. 102 Figure 4-97 Modify Double click one mark information item, you can see system pops up a dialogue box for you to change mark information. You can only change mark name here. Delete Here you can check the mark information item you want to delete and then click Delete button, you can remove one mark item. Note After you go to the mark management interface, system needs to pause current playback. System resume playback after you exit mark management interface. If the mark file you want to playback has been removed, system begins playback from the first file in the list. 4.6.5 Playback Image Here you can search and play the image. Please follow the steps listed below. Step 1 From main menu->Search, or on the preview window right click mouse and then click Search, you can go to the search interface. Step 2 At the top right corner, select image and then input playback interval. to play. Step 3 Select date and channel, click 4.6.6 Splice Playback For the large record file, you can use splice playback function to play the same file in several sections at the same time. It is very convenient for you to find the video footages you desire. On the main menu, click Search button, or right click mouse and then select Search. You can go to Figure 4-91 or Figure 4-92 On the right pane, check the box to enable splice playback function, and then set channel, date, split mode. The splice playback interface is shown as below. Each section has a small triangle; you can adjust 103 it to set time. See Figure 4-98. Figure 4-98 Note Select split mode, so that the record can be spliced in several sections. Select splice file. Click Playback, system playbacks from the first of current date by default. Click time bar, system playbacks from the time you click.

, you can select on the file list. Click Note The splice playback is for 1-window playback mode. System supports 1/4/8/16-split mode. Slight different may be found here. The 4-channel series product supports 4-split mode. The 8-channel series product support 8-split mode. The 16-channel or higher series product supports 16-split mode. The min period of each section is 5 minutes. For the record is less than 20 minutes, if you select 4-split mode (or more than 4-split mode), system can auto adjust so that the each section period is 5 minutes. In this situation, some channel may have no video. 4.6.7 Smart Playback It is to search and playback the IVS file, human face file and plate recognition record. Note There are two types to realize intelligent analytics function. Smart network camera supports intelligent functions: Some smart camera supports the intelligent functions. For NVR, it just displays the intelligent alarm information from the smart network camera and set or playback the record file. NVR supports intelligent functions: The connected network camera does not support intelligent video analytics function. The NVR supports the analytics function. This function is to playback the intelligent record file of the smart camera. 4.6.7.1 IVS File IVS extracts the key information in video based on image processing and analysis, and matches it with the preset detection rules. You can screen out and play the videos matching the rules. Step 1 From main menu->Operation->Smart Play->IVS. Enter the IVS interface. See Figure 4-99. 104 Figure 4-99 Step 2 Select Channel, Start Time, End Time and Event Type. Click Smart Search. The search results are displayed. See Figure 4-100. 105 Step 3 Click the picture to play the video file. Figure 4-100 Select the file, click and select the backup catalog in the backup interface. Select backup type and file type, choose the file and click Start to save the file to an external storage device. See Figure 4-101. 106 Figure 4-101 Select the file and click to lock the file. The locked file will not be overwritten. Select the file and click to mark the time of the detected event. 4.6.7.2 Search Human Face (Optional) Human face detection is to analyze the video from the camera and check there is any human face or not. It is to search and playback human face record. Step 1 From main menu->Operation->Smart Play->Face Detection. Enter the Face Detection interface. See Figure 4-102. 107 Figure 4-102 Step 2 Select Channel, Start Time and End Time, and choose the details for face detection as needed, such as gender, age, wearing glasses or not, wearing mask or not and with beard or not. Click Smart Search. The search results are displayed. See Figure 4-103. 108 Figure 4-103 The black blocks in the above picture is for privacy protection which will not appear in actual snapped images. Step 3 Click the image; you can view the record file. Select the file, click and select the backup catalog in the backup interface. Select backup type and file type, choose the file and click Start to save the file to an external storage device. Select a file and then click

, you can lock current file in case it will be overwritten in the future Select a file and then click For more details, please refer to face properties and human details.

, you can mark the time of the detected event. 4.6.7.3 Plate Recognition It is to search and playback the record file containing the plate number. Step 1 From main menu->Operation->Smart Play->ANPR. Enter the ANPR interface. See Figure 4-104. 109 Step 2 Set plate number, channel number, start time, end time. Figure 4-104 Note Device supports fuzzy plate number search function. Device searches all plate numbers by default if you do not input plate number information. Step 3 Click Smart Search. Device displays the corresponding image. See Figure 4-105. 110 Step 4 Click the image; you can view the record file. Figure 4-105 Click

. Select Device Name and Address in the Browse interface and click OK to export plate information. See Figure 4-106. 111 Figure 4-106 Select a file and then click

, you can save current file to peripheral storage device. Select a file and then click

, you can lock current file in case it will be overwritten in the future Select a file and then click

, you can mark the time of the detected event. 4.6.8 File List Click

, system displays file list. It displays the first channel of the record. See Figure 4-107. 112 Figure 4-107 Check a file name, double click file or click System max displays 128 record files in one list. to play. Input accurate time at the top column, you can search records of current day. to go back to the calendar/channel selection interface. Click Lock or Unlock File In Figure 4-107, select a file first and then click

. You can lock it in case it is overwritten in the future. Note NVR cannot lock a file when it is writing or overwriting. 113 Click you can view the locked file. See Figure 4-108. Figure 4-108 Select a file in the above figure and then click Unlock, you can unlock it. 4.6.9 Other Aux Functions 4.6.9.1 Digital Zoom In 1-window playback mode, left click mouse to select any zone on the screen, you can zoom in current zone. Right click mouse to exit. 4.6.9.2 Switch Channel During playback mode, select from the dropdown list to switch playback channel. This function is not for the channel of no record. The smart search channel does not support this function either. 4.7 Event Manager 4.7.1 Video Detect The video detect adopts the computer image and graphics process technology. It can analyze the video and check there is considerable changing degree or not. Once video has changed considerably

(such as there is any moving object, video is distorted), system can trigger the corresponding alarm activation operations. In the main menu, from Setting to Detect, you can see motion detect interface. See Figure 4-109.There are four detection types: motion detection, video loss, tampering and scene changing. 4.7.1.1 Motion Detect After analysis video, system can generate a motion detect alarm when the detected moving signal reached the sensitivity you set here. Detection menu is shown as below. See Figure 4-109. Event type: From the dropdown list you can select motion detection type. Channel: Select a channel from the dropdown list to set motion detect function. 114 Enable: Check the box here to enable motion detect function. Region: Click select button, the interface is shown as in Figure 4-110. Here you can set motion detection zone. There are four zones for you to set. Please select a zone first and then left drag the mouse to select a zone. The corresponding color zone displays different detection zone. You can click Fn button to switch between the arm mode and disarm mode. In arm mode, you can click the direction buttons to move the green rectangle to set the motion detection zone. After you completed the setup, please click ENTER button to exit current setup. Do remember click save button to save current setup. If you click ESC button to exit the region setup interface system will not save your zone setup. Sensitivity: System supports 6 levels. The sixth level has the highest sensitivity. Anti-dither: Here you can set anti-dither time. The value ranges from 5 to 600s. The anti-dither time refers to the alarm signal lasts time. It can be seem as the alarm signal activation stays such as the buzzer, tour, PTZ activation, snapshot, channel record. The stay time here does not include the latch time. During the alarm process, the alarm signal can begin an anti-dither time if system detects the local alarm again. The screen prompt, alarm upload, email and etc will not be activated. For example, if you set the anti-dither time as 10 second, you can see the each activation may last 10s if the local alarm is activated. During the process, if system detects another local alarm signal at the fifth second, the buzzer, tour, PTZ activation, snapshot, record channel will begin another 10s while the screen prompt, alarm upload, email will not be activated again. After 10s, if system detects another alarm signal, it can generate an alarm since the anti-dither time is out. Period: Click set button, you can see an interface is shown as in Figure 4-112. Here you can set motion detect period. System only enables motion detect operation in the specified periods. It is not for video loss or the tampering. There are two ways for you to set periods. Please note system only supports 6 periods in one day. In Figure 4-112, Select icon of several dates, all checked items can be edited together. Now the icon is shown as

. Click to delete a record type from one period. In Figure 4-112. Click button Figure 4-113. There are four record types: regular, motion detection (MD), Alarm, MD & alarm. after one date or a holiday, you can see an interface shown as in Alarm output: when an alarm occurs, system enables peripheral alarm devices. Latch: when motion detection complete, system auto delays detecting for a specified time. The value ranges from 1-300(Unit: second) Show message: System can pop up a message to alarm you in the local host screen if you enabled this function. Alarm upload: System can upload the alarm signal to the network (including alarm center) if you enabled current function. Send email: System can send out email to alert you when an alarm occurs. Record channel: System auto activates motion detection channel(s) to record once an alarm occurs. Please make sure you have set MD record in Schedule interface(Main Menu->Setting->Schedule) and schedule record in manual record interface(Main Menu->Advanced->Manual Record) PTZ activation: Here you can set PTZ movement when an alarm occurs. Such as go to preset, tour

&pattern when there is an alarm. Click select button, you can see an interface is shown as in Figure 4-111 X. 115 Record Delay: System can delay the record for specified time after alarm ended. The value ranges from 10s to 300s. Tour: Here you can enable tour function when alarm occurs. System one-window tour. Snapshot: You can enable this function to snapshot image when a motion detect alarm occurs. Video matrix Check the box here to enable this function. When an alarm occurs, SPOT OUT port displays device video output. It displays video (1-window tour) from alarm activation channel you select at the Record channel item. Buzzer: Highlight the icon to enable this function. The buzzer beeps when alarm occurs. to select the corresponding function. After all the setups please click save Please highlight icon button, system goes back to the previous menu. Note:

In motion detection mode, you cannot use copy/paste to set channel setup since the video in each channel may not be the same. In Figure 4-110, you can left click mouse and then drag it to set a region for motion detection. Click Fn to switch between arm/withdraw motion detection. After setting, click enter button to exit. Figure 4-109 116 Figure 4-110 Figure 4-111 Figure 4-112 117 Figure 4-113 Motion detect here only has relationship with the sensitivity and region setup. It has no relationship with other setups. 4.7.1.2 Tampering When someone viciously masks the lens, or the output video is in one-color due to the environments light change, the system can alert you to guarantee video continuity. Tampering interface is shown as in Figure 4-114. You can enable Alarm output or Show message function when tampering alarm occurs. Sensitivity: The value ranges from 1 to 6. It mainly concerns the brightness. The level 6 has the higher sensitivity than level 1. The default setup is 3. Tips:

You can enable preset/tour/pattern activation operation when video loss occurs. Please refer to chapter 4.7.1.1 motion detection for detailed information. Note In Detect interface, copy/paste function is only valid for the same type, which means you cannot copy a channel setup in video loss mode to tampering mode. About Default function. Since detection channel and detection type may not be the same, system can only restore default setup of current detect type. For example, if you click Default button at the tampering interface, you can only restore default tampering setup. It is null for other detect types. System only enables tampering function during the period you set here. It is null for motion detect or video loss type. 118 Figure 4-114 4.7.1.3 Video Loss After connected the system to the remote device, system can generate an alarm once the remote device has lost the video. System can trigger the corresponding alarm operations. In Figure 4-109, select video loss from the type list. You can see the interface is shown as in Figure 4-115. This function allows you to be informed when video loss phenomenon occurred. You can enable alarm output channel and then enable show message function. You can refer to chapter 4.7.1.1Motion detect for detailed information. Tips:

You can enable preset/tour/pattern activation operation when video loss occurs. 119 Figure 4-115 4.7.1.4 Scene Changing When the detected scene has changed, system can generate an alarm. From main menu->Setting->Event->Video detect->Scene change, the interface is shown as in Figure 4-116. Please refer to chapter 4.7.1.1Motion detect for detailed information. 120 Figure 4-116 4.7.2 Smart Plan The smart plan is for the smart network camera. If you do not set a rule here, you cannot use the intelligent functions in IVS (Chapter 4.7.3), Face detection (Chapter 4.7.4) and People counting (Chapter 4.7.5) when you are connecting to a smart network camera. There are two types to realize intelligent analytics function. Note Smart network camera supports intelligent functions: Some smart camera supports the intelligent functions. For NVR, it just displays the intelligent alarm information from the smart network camera and set or playback the record file. NVR supports intelligent functions: The connected network camera does not support intelligent video analytics function. The NVR supports the analytics function. In this interface, you can quickly add an intelligent rule for one preset. The intelligent rule includes human face detection, behavior analytics and people counting. From main menu->Setting->Event->Smart plan, the interface is shown as below. See Figure 4-117. 121 Please select a channel number and a preset. Click Add. The preset is now on the list. See Figure 4-118. Figure 4-117 Note Some smart camera does not need to add the preset. Please refer to the actual product for detailed information. 122 Figure 4-118 Select a smart plant from the dropdown list and then click the corresponding intelligent plan icon. See Figure 4-118. Note The NVR supports general behavior analytics (IVS), human face detection, heat map, and people counting. Different network camera supports different smart plans. Please refer to the actual product for detailed information. The general behavior analytics (IVS) and human face detection function cannot be valid at the same time. For example, when add the IVS plan to the preset 1, the human face detection icon becomes grey. IVS (General Behavior Analytics) (Optional) Click OK to complete the setup. 4.7.3 The general behavior analysis refers to the system to analyze and process the video and extract the key information from the video. Once the video can match the previously set detection rule, system can trigger the corresponding alarm operations. Note This function is for some series product only. Please refer to the actual product for detailed information. The IVS function and the human face detection function cannot be valid at the same time. The IVS function environment shall meet the following requirements:

123 The object total size shall not be more than 10% of the whole video. The object size on the video shall not be more than 10pixels*10 pixels. The abandoned object size shall be more than 15pixels*15 pixels (CIF resolution). The object width shall not be more than 1/3 of the video height and width. The recommended height is 10% of the video. The object and the background brightness different shall be more than 10 grey levels. The object shall remain on the video for more than 2 seconds. The moving distance is larger than its own width and shall not be smaller than 15pixels (CIF resolution). The surveillance environment shall not be too complicated. The IVS function is not suitable for the environment of too many objects or the changing light. The surveillance environment shall not contain glasses, reflection light from the ground, and water. Free of tree branches, shadow, mosquito and bugs. Do not use the IVS function in the backlight environment, avoid direct sunlight. From main menu->Setting->Event->Behavior Analytics, you can go to the behavior analytics interface. Here you can set general behavior analytics rule. System can generate an alarm as the mode you previously set once there is any object violates the rule. See Figure 4-119. Figure 4-119 Select a channel from the dropdown list. Click Add button to add a rule and then select a rule type from the dropdown list. Set corresponding parameters. Click Apply button to complete the setup. 4.7.3.1 Tripwire (Optional) System generates an alarm once there is any object crossing the tripwire in the specified direction. The tripwire supports customized setup. It can be a straight line or a curve. Support one-direction or dual-direction detection. 124 Support several tripwires at the same scene suitable for complicated environment. Support object size filter. From main menu->Setting->Event->Behavior analytics, the interface is shown as below. See Figure 4-120. Click Draw button to draw the tripwire. See Figure 4-121. Figure 4-120 125 Figure 4-121 Select direction, and then input customized rule name. Preset: Select a preset you want to use behavior analytics. Name: Input customized rule name. Direction (AB/BA/AB): System can generate an alarm once there is any object crossing in the specified direction. Target filter: Click

, you can set filter object size. Each rule can set two sizes (min size/max size). Once the object is smaller than the min size or larger than the max size, there is no alarm. Please make sure the max size is larger than the min size. Now you can draw a rule. Left click mouse to draw a tripwire. The tripwire can be a direct line, curve or polygon. Right click mouse to complete. Tips Click to delete the corresponding rule. Click

, you can see the following interface. See Figure 4-122. You can refer to the following information to set other parameters. Channel: Select a channel from the dropdown list to set tripwire function. Enable: Check the box here to enable tripwire function. Rule: input customized rule name here. Period: Click set button, you can see an interface is shown as in Figure 4-112. Here you can set tripwire period. System only enables tripwire operation in the specified periods. There are two ways for you to set periods. Please note system only supports 6 periods in one day. 126 In Figure 4-112, Select icon of several dates, all checked items can be edited together. Now the icon is shown as

. Click to delete a record type from one period. In Figure 4-112. Click button as in Figure 4-113. after one date or a holiday, you can see an interface shown Alarm output: when an alarm occurs, system enables peripheral alarm devices. Latch: when tripwire complete, system auto delays detecting for a specified time. The value ranges from 1-300(Unit: second) Show message: System can pop up a message to alarm you in the local host screen if you enabled this function. Alarm upload: System can upload the alarm signal to the network (including alarm center) if you enabled current function. Send email: System can send out email to alert you when an alarm occurs. Record channel: System auto activates tripwire channel(s) to record once an alarm occurs. Please make sure you have set intelligent record in Schedule interface(Main Menu->Setting->Schedule) and schedule record in manual record interface(Main Menu->Advanced->Manual Record) PTZ activation: Here you can set PTZ movement when an alarm occurs. Such as go to preset, tour

&pattern when there is an alarm. Click select button, you can see an interface is shown as in Figure 4-111 X. Record Delay: System can delay the record for specified time after alarm ended. The value ranges from 10s to 300s. Tour: Here you can enable tour function when an alarm occurs. System one-window tour. Snapshot: You can enable this function to snapshot image when a motion detect alarm occurs. Buzzer: Highlight the icon to enable this function. The buzzer beeps when an alarm occurs. Figure 4-122 127 Figure 4-123 Figure 4-124 128 Figure 4-125 After you set the corresponding parameters, click OK button in Figure 4-122., and then click the Apply button in Figure 4-120 to complete the setup. 4.7.3.2 Intrusion (Cross warning zone) (Optional) System generates an alarm once there is any object entering or exiting the zone in the specified direction. From main menu->Setting->Event->Behavior analytics, click Add button and then select type as intrusion, the interface is shown as below. See Figure 4-126. System supports customized area shape and amount. Support enter/leave/both detection. Can detect the moving object operation in the specified zone, customized trigger amount and staying time. Support objects filter function. 129 Click draw button to draw the zone. See Figure 4-127. Figure 4-126 130 Figure 4-127 Select direction, and then input customized rule name. Preset: Select a preset you want to use behavior analytics. Name: Input customized rule name. Direction (AB/BA/AB): System can generate an alarm once there is any object crossing in the specified direction. Target filter: Click

, you can set filter object size. Each rule can set two sizes (min size/max size). Once the object is smaller than the min size or larger than the max size, there is no alarm. Please make sure the max size is larger than the min size. Now you can draw a rule. Left click mouse to draw a warning zone. Right click mouse to complete the setup. Tips Click to delete the corresponding rule.

, you can refer to chapter 4.7.3.1 to set other parameters. Click Click Apply to complete the setup. 4.7.3.3 Abandoned Object Detect (Optional) System generates an alarm when there is abandoned object in the specified zone. From main menu->Setting->Event->Behavior analytics, select the type as abandoned object, the object interface is shown as below. See Figure 4-128. 131 System supports customized area shape and amount. Support duration setup. Support objects filter function. Click draw button to draw the zone. See Figure 4-129. Figure 4-128 132 Figure 4-129 Preset: Select a preset you want to use behavior analytics. Name: Input customized rule name. Duration: System can generate an alarm once the object is in the zone for the specified period. Target filter: Click

, you can set filter object size. Each rule can set two sizes (min size/max size). Once the object is smaller than the min size or larger than the max size, there is no alarm. Please make sure the max size is larger than the min size. Now you can draw a rule. Left click mouse to draw a zone, until you draw a rectangle, you can right click mouse. Tips Click to delete the corresponding rule.

, you can refer to the chapter 4.7.3.1 to set other parameters. Click Click Apply to complete the setup. 4.7.3.4 Missing Object Detection (Optional) System generates an alarm when there is missing object in the specified zone. From main menu->Setting->Event->Behavior analytics, select the type as abandoned object, the object interface is shown as below. See Figure 4-130. System supports customized area shape and amount. Support duration setup. Support objects filter function. 133 Click Draw button to draw a zone. See Figure 4-131. Figure 4-130 Figure 4-131 134 Preset: Select a preset you want to use behavior analytics. Name: Input customized rule name. Duration: System can generate an alarm once the object in the zone is missing for the specified period. Target filter: Click

, you can set filter object size. Each rule can set two sizes (min size/max size). Once the object is smaller than the min size or larger than the max size, there is no alarm. Please make sure the max size is larger than the min size. Now you can draw a rule. Left click mouse to draw a zone, until you draw a rectangle, you can right click mouse. Tips Click to delete the corresponding rule.

, you can refer to the chapter 4.7.3.1 to set other parameters. Click Click Apply to complete the setup. 4.7.3.5 Loitering Detection (Optional) System can generate an alarm once the object is staying in the specified zone longer than the threshold. From main menu->Setting->Event->Behavior analytics, select the type as loitering, the object interface is shown as below. See Figure 4-132. System supports customized area shape and amount. Support duration setup. Support objects filter function. Figure 4-132 135 Click draw button to draw the zone. See Figure 4-133. Figure 4-133 Preset: Select a preset you want to use behavior analytics. Name: Input customized rule name. Duration: System can generate an alarm once the object is in the zone for the specified period. Target filter: Click

, you can set filter object size. Each rule can set two sizes (min size/max size). Once the object is smaller than the min size or larger than the max size, there is no alarm. Please make sure the max size is larger than the min size. Now you can draw a rule. Left click mouse to draw a zone, until you draw a rectangle, you can right click mouse. Tips Click to delete the corresponding rule.

, you can refer to the chapter 4.7.3.1 to set other parameters. Click Click Apply to complete the setup. 4.7.3.6 Crowd Gathering Detection (Optional) System can generate an alarm once the people amount gathering in the specified zone is larger than the threshold. From main menu->Setting->Event->Behavior analytics, select the type as crowd gathering detect, the interface is shown as below. See Figure 4-134. 136 Customized zone and amount setup. Duration setup. Sensitivity setup. Min gathering zone setup. Click draw button to draw the zone. See Figure 4-135. Figure 4-134 137 Figure 4-135 Preset: Select a preset you want to use behavior analytics. Name: Input customized rule name. Duration: System can generate an alarm once the object is in the zone for the specified period. Sensitivity: It is to set alarm sensitivity. The value ranges from 1 to 10.The default setup is 5. Target filter: Click

, you can set filter object size. Each rule can set two sizes (min size/max size). Once the object is smaller than the min size or larger than the max size, there is no alarm. Please make sure the max size is larger than the min size. Now you can draw a rule. Left click mouse to draw a zone, until you draw a rectangle, you can right click mouse. Tips Click to delete the corresponding rule.

, you can refer to the chapter 4.7.3.1 to set other parameters. Click Click Apply to complete the setup. 4.7.3.7 Fast moving (Optional) It is to detect the fast moving object in the specified zone. From main menu->Setting->Event->Behavior analytics, select the type as fast moving, the interface is shown as below. See Figure 4-136. 138 Click draw button to draw the zone. See Figure 4-137. Figure 4-136 139 Figure 4-137 Preset: Select a preset you want to use behavior analytics. Name: Input customized rule name. Sensitivity: It is to set alarm sensitivity. The value ranges from 1 to 10.The default setup is 5. Target filter: Click

, you can set filter object size. Each rule can set two sizes (min size/max size). Once the object is smaller than the min size or larger than the max size, there is no alarm. Please make sure the max size is larger than the min size. Now you can draw a rule. Left click mouse to draw a zone, until you draw a rectangle, you can right click mouse. Tips Click to delete the corresponding rule.

, you can refer to the chapter 4.7.3.1 to set other parameters. Click Click Apply to complete the setup. 4.7.3.8 Global Setup (Optional) After set one horizontal gauge and three vertical gauge and the actual distances between each gauge, the system can estimate the network camera internal parameters(internal geometrical features and optical properties) and external parameters (the network camera position and direction on the actual environment),it can confirm the actual distance on the current surveillance environment. From main menu->Setting->Event->IVS (Behavior analytics), enter the following interface. See Figure 140 4-138. Figure 4-138 Click Global config button, the interface is shown as below. See Figure 4-139. Channel: Please select a channel from the dropdown list. Preset: Select a preset you want to set the rule. Please note, you need to add a preset first, otherwise, you cannot see the preset dropdown list. If there is no preset, you can draw a rule in current channel. Calibration zone:

Click Add zone

, you can draw a calibration zone at the left pane of the interface. Select a zone and then click Delete zone button; you can remove the selected zone. Select gauge type (horizontal/tilt), you can set the corresponding length. You can draw three tilt gauges and one horizontal gauge at the left pane of the interface. Select Width/Height and then click Verify, you can draw a line in the calibration zone, and then you can see its actual length. Refresh preset: Click it to get the latest preset setup. 141 Figure 4-139 4.7.4 Face Detect (Optional) System processes and analyzes the video from the camera. System can generate an alarm when it detects there is any human face information. From main menu->Setting->Event->Face detect, the interface is shown as in Figure 4-140. Face ROI: Check the box here, system can enhance the human face display pane. Note Make sure the connected camera supports human face detect function if you want to use face ROI function. Log: Check the box here, system can record face detect log. You can refer to the chapter 4.7.1.1 Motion detect to set other parameters. 142 Figure 4-140 4.7.5 People Counting (Optional) System adopts video image and graphics analysis technology. System can calculate the entry/exit people amount in the specified zone on the video. It can generate an alarm when the amount has exceeded the threshold. From main menu->Setting->Event->People counting, you can see an interface shown as in Figure 4-141. Enable: Check the box to enable people counting function. OSD overlay: Check the box here; you can view the people amount on the surveillance video. Rule setup: Click Set button, you can set people counting zone, name, and direction (entry/exit). Entry No.: It is to set people entry amount. System can generate an alarm once the amount has exceeded the threshold. Exit No.: It is to set people exit amount. System can generate an alarm once the amount has exceeded the threshold. Remaining No.: It is to set people staying amount in the zone. System can generate an alarm once the amount has exceeded the threshold. You can refer to the chapter 4.7.1.1 motion detect to set other parameters. Click OK to complete the setup. 143 Figure 4-141 After you set the people counting function, from main menu->Info->Event->People counting, you can view people counting statistics report. Please refer to chapter 4.7.1.1 Motion detect for detailed information. 4.7.6 Heat Map Heat map technology can monitor the active objects distribution status on the specified zone during a period of time, and use the different colors to display on the heat map. Step 1 From main menu->Setting->Event->Heat map. Enter heat map interface. See Figure 4-142. 144 Figure 4-142 Step 2 Select a channel number and then check the box to enable the function. Step 3 Click Setup button. Enter setup interface. See Figure 4-143. Step 4 Set arm/disarm period. Refer to chapter 4.7.1.1 Motion detect for detailed setup information. Figure 4-143 145 Step 5 Click Apply button to complete setup. Note After set the heat map parameters, go to main menu->Info->Event->Heat map to view heat map report. Refer to chapter 4.10.2.3.3 for detailed setup information. 4.7.7 Plate Recognition 4.7.7.1 Plate recognition settings Device can generate an alarm when it detects the corresponding plate information. Please follow the steps listed below. Step 1 From main menu->Setup->Event->Vehicle Recognition-> Vehicle Recognition. Enter Vehicle Recognition interface. See Figure 4-144. Figure 4-144 Step 2 Check Enable to enable plate recognition function. Step 3 Select a channel number and then click the Rule to set the plate recognition name and detection zone. Step 4 Click Regular, blacklist, whitelist to set. Before use blacklist alarm or whitelist alarm function, please add the corresponding plate Note information. Refer to chapter 4.7.7.2 B/W list for detailed information. Regular: In this interface, device triggers an alarm when it detects all plate numbers. Blacklist: In this interface, device triggers an alarm when it detects plate number in the blacklist. 146 Whitelist: In this interface, device triggers an alarm when it detects plate number in the whitelist. 4.7.7.2 B/W List It is to set the blacklist and the whitelist. It includes add, delete, import, export blacklist/whitelist. After setting the blacklist/whitelist, in the plate snapshot list on the preview interface, the blacklist plate number is red, the whitelist plate number is green, the regular plate number is white. Add blacklist/whitelist Step 1 From main menu->Setting->Event->Vehicle Recognition->B/W list. Enter B/W list interface. See Figure 4-145. Figure 4-145 Step 2 Set plate number and then select type as blacklist or whitelist. Step 3 Click Add button. Delete blacklist/whitelist Set type as blacklist, whitelist or all, click Search button, device displays the corresponding information. Check the box before the plate number and then click Delete or Click Clear to delete all plate information in the blacklist/whitelist. Import/export blacklist/whitelist Device supports blacklist/whitelist import/export function via the USB device. The import file supports .csv to delete a plate number. 147 and xlsx. The export file is .csv. Import blacklist/whitelist: Set the type as blacklist or whitelist and then click Import button. Select the corresponding file and then click Open button to import. Export blacklist/whitelist: Set the type as blacklist or whitelist and then click Export button. The Browse interface is displayed. See Figure 4-146. Select the file save path, enter the encryption password, and then click Save. Figure 4-146 Backup encryption is enabled by default when exporting the black/white list. If file backup encryption is enabled, the extension name of the exported file is .backup. If the backup encryption is disabled, the extension name of the exported file is .csv. It might lead to data leakage. 4.7.8 Audio Detect (Optional) System can generate an alarm once it detect the audio is not clear, the tone color has changed or the is abnormal or audio volume changes. From main menu->Setting->Event->Audio detect, you can see an interface shown as in Figure 4-147. Input abnormal: Check the box here, system can generate an alarm once the audio input is abnormal. Intensity change: Check the box here, system can generate an alarm once the audio volume becomes strong. Sensitivity: It refers to the audio recognition sensitivity. The higher the value is, the higher the sensitivity is. 148 Threshold: It is to set intensity change threshold. The smaller the value is, the higher the sensitivity is. Log: Check the box here, system can record audio detect alarm log. Refer to the chapter 4.7.1.1 Motion Detect to set other parameters. Figure 4-147 4.7.9 Alarm Settings In the main menu, from Setting->Event->Alarm, you can see alarm setup interface. Alarm in: Here is for you to select channel number. In the main menu, from Setting->Event->Alarm, you can see alarm setup interface. See Figure 4-148. There are four alarm types. See Figure 4-148 to Figure 4-151. Local alarm: After connect the alarm device to the NVR alarm input port, system can trigger the corresponding alarm operations when there is alarm signal from the alarm input port to the NVR. Network alarm: NVR trigger corresponding alarm operations when it receives the alarm signal via the network transmission. IPC external alarm: When the network camera connected peripheral device has triggered an alarm, it can upload the alarm signal to the NVR via the network transmission. The system can trigger the corresponding alarm operations. IPC offline alarm: When the network connection between the NVR and the network camera is off, the system can trigger the corresponding alarm operations. Enable: Please you need to highlight this button to enable current function. Type: normal open or normal close. Period: Click set button, you can see an interface is shown as in Figure 4-153. There are two ways for you to set periods. There are max 6 periods in one day. There are four record types: regular, 149 motion detection (MD), Alarm, MD & alarm. In Figure 4-153, Select icon of several dates, all checked items can be edited together. Now the icon is shown as

. Click to delete a record type from one period. In Figure 4-153. Click button as in Figure 4-154. There are four record types: regular, motion detection (MD), Alarm, MD &

alarm. after one date or a holiday, you can see an interface shown PTZ activation: When an alarm occurred, system can activate the PTZ operation. The PTZ activation lasts an anti-dither period. See Figure 4-152. Anti-dither: Here you can set anti-dither time. The value ranges from 5 to 600s. The anti-dither time refers to the alarm signal lasts time. It can be seem as the alarm signal activation stays such as the buzzer, tour, PTZ activation, snapshot, channel record. The stay time here does not include the latch time. During the alarm process, the alarm signal can begin an anti-dither time if system detects the local alarm again. The screen prompt, alarm upload, email and etc will not be activated. For example, if you set the anti-dither time as 10 second, you can see the each activation may last 10s if the local alarm is activated. During the process, if system detects another local alarm signal at the fifth second, the buzzer, tour, PTZ activation, snapshot, record channel will begin another 10s while the screen prompt, alarm upload, email will not be activated again. After 10s, if system detects another alarm signal, it can generate an alarm since the anti-dither time is out. Alarm output: The number here is the device alarm output port. You can select the corresponding ports(s) so that system can activate the corresponding alarm device(s) when an alarm occurred. Latch: When the anti-dither time ended, the channel alarm you select in the alarm output may last the specified period. The value ranges from 1 to 300 seconds. This function is not for other alarm activation operations. The latch is still valid even you disable the alarm event function directly. Show message: System can pop up a message to alarm you in the local host screen if you enabled this function. Alarm upload: System can upload the alarm signal to the network (including alarm center and the WEB) if you enabled current function. System only uploads the alarm channel status. You can go to the WEB and then go to the Alarm interface to set alarm event and alarm operation. Please go to the Network interface to set alarm center information. Send email: System can send out the alarm signal via the email to alert you when alarm occurs. Once you enable the snap function, system can also send out an image as the attachment. Please go to the Main Menu->Setting ->Network->Email interface to set. Record channel: you can select proper channel to record alarm video (Multiple choices). You need to set alarm record mode as Schedule in Record interface (Main Menu->Advanced->Record). Please note the manual record has the highest priority. System record all the time no matter there is an alarm or not if you select Manual mode. Now you can go to the Schedule interface (Main Menu->Setting->Schedule) to set the record type, corresponding channel number, week and date. You can select the record type:Regular/MD/Alarm/MD&Alarm. Please note, you cannot select the MD&Alarm and MD(or Alarm) at the same time. Now you can go to the Encode interface to select the alarm record and set the encode parameter (Main Menu->Setting->Encode). 150 Finally, you can set the alarm input as the local alarm and then select the record channel. The select channel begins alarm record when an alarm occurred. Please note system begins the alarm record instead of the MD record if the local alarm and MD event occurred at the same time. Tour: Here you can enable tour function when an alarm occurs. System supports 1/8-window tour. Please go to chapter4.3.6.2 Display for tour interval setup. Please note the tour setup here has higher priority than the tour setup you set in the Display interface. Once there two tours are both enabled, system can enable the alarm tour as you set here when an alarm occurred. If there is no alarm, system implements the tour setup in the Display interface. Snapshot: You can enable this function to snapshot image when an alarm occurs. Buzzer: Highlight the icon to enable this function. The buzzer beeps when an alarm occurs. Figure 4-148 151 Figure 4-149 Figure 4-150

. 152 Figure 4-151 Figure 4-152 153 Figure 4-153 Figure 4-154 to select the corresponding function. After setting all the setups please Please highlight icon click save button. 4.7.10 Abnormality There are three types: Disk/Network/User. Disk: Disk error, no disk, no space. See Figure 4-155. Network: Disconnection, IP conflict, MAC conflict. See Figure 4-156. User: Illegal login. Figure 4-157. 154 Alarm output: Please select alarm activation output port (multiple choices). Less than: System can alarm you when the HDD space is less than the threshold you set here

(For HDD no space type only). Attempts: In user interface, select illegal login from the dropdown list. Here you can set login attempts. The value ranges from 1 to 10. Lock time: In user interface, select illegal login from the dropdown list. Here you can set account lock time. The value ranges from 1 to 30 minutes. Latch: Here you can set corresponding delaying time. The value ranges from 1s-300s. System automatically delays specified seconds in turning off alarm and activated output after external alarm cancelled. Show message: system can pop up the message in the local screen to alert you when alarm occurs. Alarm upload: System can upload the alarm signal to the network (including alarm center) if you enabled current function. For disconnection event, IP conflict event and MAC conflict event, this function is null. Send email: System can send out email to alert you when alarm occurs. Buzzer: Highlight the icon to enable this function. The buzzer beeps when an alarm occurs. Figure 4-155 155 Figure 4-156 4.7.11 Alarm output From Main menu->Setting->Event->Alarm output, you can see an interface shown as in Figure 4-158. Figure 4-157 156 Here is for you to set proper alarm output (Auto/manual/stop). Connect the alarm device to the system alarm output port, and set the mode as auto, system can trigger the corresponding operations when an alarm occurs. Auto: Once an alarm event occurs, system can generate an alarm. Manual: Alarm device is always on the alarming mode. Stop: Disable alarm output function. Click OK button of the alarm reset, you can clear all alarm output status. Figure 4-158 to select the corresponding alarm output. Please highlight icon After all the setups please click OK button. 4.7.12 POS Connect the device with the POS, the device can receive the POS information and overlay corresponding info on the video. Note For the local-end, this function supports 1/4-window display and 1-window playback. This function is for the cashier of the supermarket and etc. The device can get the information from the POS and then overlay the txt information on the video. Step 1 From main menu->Setting->System->POS, the interface is shown as below. See Figure 4-159. 157 Figure 4-159 Step 2 Click Add button, the interface is shown as below. See Figure 4-160. Set parameters. Enable: Check the box to enable POS function. Name: Set POS name. 1. Click 2. 3. Click OK button. Input POS name on the pop-up dialogue box. Note The POS name shall be unique. System max supports 64 English letters. Event: Set POS arm/disarm period, record channel and etc. Click Setup to go to the interface. For detailed information, please refer to chapter 4.7.1.1 motion detect. PrivacyAfter enable this function, once the overlay information contain the privacy character, it displays as *. For example, the privacy character is 12,56,89, the local preview and WEB surveillance information is shown as **34**7** if the overlay information is 123456789. For detailed information, please refer to chapter 4.7.12.1 privacy setup. Protocol type: The default setup is POS. Connection type: It is to set and NVR connection mode. It includes UDP,TCP,RS232,RS485. After set the connection type, please click the Setup button to set the corresponding parameters. For detailed information, please refer to chapter 4.7.12.2 connection type. Convert: It is to set font type. Overlay: It is to set overlay mode. It includes turn and roll. 158 Turn: Once the overlay information has reached 8 lines, NVR turn to the next page. Roll: Once the overlay information has reached 8 lines, NVR displays the next new line and delete the oldest line. Network overtime: Once there is no POS data for the specified period, NVR automatically deletes POS information after specified period. Font size: The overlay font size. Color: The overlay font color. POS Info: Check the box to overlay information on the local preview window. to enter advanced settings interface. Advanced: Click Transaction start/transaction end: It is to set transaction start and end character. The overlay information only displays the character after the start string and before the end string. For example, the start character is 12 and the end character is 90, NVR displays 34567 on local preview and Web preview interface if the sending out information is 123456789. Line delimiter: After set the line delimiter, the overlay information after the delimiter is displayed in the new line. For example, the line delimiter is 45 and the overlay information is 123456789, NVR displays 123 in the first line and displays 6789 in the second line. Hex: Check the Hex to switch ASCII code. Case insensitive: Check the box to enable case insensitive function. When this function is enabled, set the start character as aa, NVR cannot distinguish the upper and lower case when sending out information 11aA23456. The NVR overlays information is 23456 on local surveillance and Web preview. When this function is disabled, set the start character as aa, NVR can distinguish the upper and lower case when sending out information 11aA23456. The NVR does not overlay information local surveillance and Web preview. 4.7.12.1 Privacy Setup Step 1 Click Setup Enter Setup interface. See Figure 4-160, 159 Figure 4-160 Step 2 Set privacy information. Step 3 Click OK button. 4.7.12.2 Connection type Connection type is UDP or TCP. Step 1 Click Setup. Enter Setup interface. See Figure 4-161. Step 2 Source IP and port refers to POS IP address and port. Figure 4-161 160 Note Destination IP and port refers to NVR IP address and port. System can auto get and display. Step 3 Click OK to complete setup. Connection mode is RS232 or RS485. Step 1 Click Setup. Enter Setup interface. See Figure 4-162. Step 2 Set address, baud rate, data bit, stop bit and parity. Figure 4-162 Note Make sure the parameters here are the same with the POS setup. Step 3 Click OK to complete setup. 4.8 Network 4.8.1 Network Settings 4.8.1.1 TCP/IP The single network adapter interface is shown as in Figure 4-163 and the dual network adapters interface is shown as in Figure 4-164. Network Mode : Includes multiple access, fault tolerance, and load balancing Multiple-address mode: eth0 and eth1 operate separately. You can use the services such as HTTP, RTP service via etho0 or the eth1. Usually you need to set one default card (default setup is etho) to request the auto network service form the device-end such as DHCP, email, FTP and etc. In multiple-address mode, system network status is shown as offline once one card is offline. 161 Network fault-tolerance: In this mode, device uses bond0 to communicate with the external devices. You can focus on one host IP address. At the same time, you need to set one master card. Usually there is only one running card (master card).System can enable alternate card when the master card is malfunction. The system is shown as offline once these two cards are both offline. Please note these two cards shall be in the same LAN. Load balance: In this mode, device uses bond0 to communicate with the external device. The eth0 and eth1 are both working now and bearing the network load. Their network load are general the same. The system is shown as offline once these two cards are both offline. Please note these two cards shall be in the same LAN. Default Network Card: Please select eth0/eth1/bond0(optional) after enable multiple-access function Main Network Card: Please select eth0/eth1 (optional).after enable multiple access function. Note: The dual-Ethernet port series support the above three configurations and supports functions as multiple-access, fault-tolerance and load balancing. IP Version: There are two options: IPv4 and IPv6. Right now, system supports these two IP address format and you can access via them. MAC address: The host in the LAN can get a unique MAC address. It is for you to access in the LAN. It is read-only. IP address: Here you can use up/down button () or input the corresponding number to input IP address. Then you can set the corresponding subnet mask the default gateway. Default gateway: Here you can input the default gateway. Please note system needs to check the validity of all IPv6 addresses. The IP address and the default gateway shall be in the same IP section. That is to say, the specified length of the subnet prefix shall have the same string. DHCP: It is to auto search IP. When enable DHCP function, you cannot modify IP/Subnet mask

/Gateway. These values are from DHCP function. If you have not enabled DHCP function, IP/Subnet mask/Gateway display as zero. You need to disable DHCP function to view current IP information. Besides, when PPPoE is operating, you cannot modify IP/Subnet mask /Gateway. MTU: It is to set MTU value of the network adapter. The value ranges from 1280-7200 bytes. The default setup is 1500 bytes. Please note MTU modification may result in network adapter reboot and network becomes off. That is to say, MTU modification can affect current network service. System may pop up dialog box for you to confirm setup when you want to change MTU setup. Click OK button to confirm current reboot, or you can click Cancel button to terminate current modification. Before the modification, you can check the MTU of the gateway; the MTU of the NVR shall be the same as or is lower than the MTU of the gateway. In this way, you can reduce packets and enhance network transmission efficiency. The following MTU value is for reference only. 1500: Ethernet information packet max value and it is also the default value. It is the typical setup when there is no PPPoE or VPN. It is the default setup of some router, switch or the network adapter. 1492: Recommend value for PPPoE. 1468: Recommend value for DHCP. Preferred DNS server: DNS server IP address. Alternate DNS server: DNS server alternate address. Transfer mode: Here you can select the priority between fluency/video qualities. LAN download: System can process the downloaded data first if you enable this function. The download speed is 1.5X or 2.0X of the normal speed. 162 LAN download: System can process the downloaded data first if you enable this function. The download speed is 1.5X or 2.0X of the normal speed. After completing all the setups please click save button, system goes back to the previous menu. Figure 4-163 Figure 4-164 4.8.1.2 Port 163 The connection setup interface is shown as in Figure 4-165. Max connection: The max client login amount (such as WEB, platform, cellphone and etc). The value ranges from 1 to 128(default). TCP port: Default value is 37777. UDP port: Default value is 37778. HTTP port: Default value is 80. HTTPS port: Select the Enable check box and configure the port according to your actual needs. The default value is 443. After HTTPS is enabled, HTTP will be switched to HTTPS by force to transmit data in a safer way. RTSP port: Default value is 554. System needs to reboot after you changed and saved any setup of the above ports. Make sure the port values here do not conflict. Figure 4-165 4.8.1.3 Wi-Fi AP Note This function is available only for NVR devices with built-in Wi-Fi module. See the actual situation. 4.8.1.3.1 General Settings The Wi-Fi AP interface is shown as below. See Figure 4-166. Here you can set Wi-Fi hotspot, so that the network camera can use the hotspot to connect to the network. 2.4GHz: Please check the box to enable the function. SSID: It is to set SSID name. You can use this name to search the device. Password: It is to set SSID password. You can use this password to connect to the network. 164 Encryption Type: Select encryption type from the dropdown list. Channel: Please select a channel from the dropdown list. The default setup is auto. Gain: There are three options: High/middle/low. Please select from the dropdown list. Figure 4-166 4.8.1.3.2 Advanced Click Advanced and you can see an interface shown as below. See Figure 4-167. Subnet Mask: Input Wi-Fi AP subnet mask. Default Gateway: Input Wi-Fi AP gateway. Start IP/End IP: Input start IP and end IP of the network cameras. The NVR can allocate the IP IP Address: Input Wi-Fi AP IP address. addresses in the range you specified here. Upgrade: Click it to upgrade Wi-Fi AP module. 165 Figure 4-167 4.8.1.4 Wi-Fi The Wi-Fi interface is shown as below. See Figure 4-168. Enable: Check the box here to enable Wi-Fi function. Refresh: You can click it to search the hotspot list again. It can automatically add the information such as the password if you have set it before. Disconnect: Here you can click it to turn off the connection. Connect: Here you can click it to connect to the hotspot. System needs to turn off current connection and then connect to a new hotspot if there is connection of you selected one. 166 Figure 4-168 Wi-Fi working status: Here you can view current connection status. Please note:

After successful connection, you can see Wi-Fi connection icon at the top right corner of the preview interface. When the hotspot verification type is WEP, system displays as AUTO since the device cannot detect its encryption type. System does not support verification type WPA and WPA2. The display may become abnormal for the verification type and encryption type. After device successfully connected to the Wi-Fi, you can view the hotspot name, IP address, subnet mask, default gateway and etc. Right now system support TOTOLINK_N2200UP module. 4.8.1.5 Repeater The device supports repeater function for front-end IPCs to effectively extend video transmission distance and range. Only some devices support this function. Repeater is available for devices with built-in Wi-Fi module and the front-end IPC shall support repeater. Binding Repeater Step 1 Turn on the NVR device and IPCs, and then directly connect all the IPCs to the NVR device via Wi-Fi. Step 2 Enter from main menu > Setting > Network > Repeater. Step1 The Repeater interface is displayed. See Figure 4-169. 167 When the connection line is green, the channel has conneted to Wi-Fi IPC successfully. Figure 4-169 Step 3 Click after the channel you want to set the repeater function. System displays the icon to add channel. See Figure 4-170. 168 Figure 4-170 Step 4 Click and select the channel you want to add. After the adding is successful, system displays the following interface. See Figure 4-171. 169 Figure 4-171 To take Figure 4-171 as an example, the IPC connected to CH1 is the primary repeater and the IPC connected to CH2 is the secondary repeater. Each primary repeater can connect 2 Wi-Fi IPCs at most in series or in parallel. When connecting IPCs in series, the IPC in CH2 works as a secondary repeater to connect the IPC in CH3. See Figure 4-172. When connecting IPCs in parallel, the IPC in CH1 works as a primary repeater to connect the IPCs in CH2 and CH3. See Figure 4-173. 170 Figure 4-172 Figure 4-173 171 Step 5 Click Apply or OK to save the configuration. Unbinding Repeater If you want to unbind the repeater, click the corresponding channel and the IPC in this channel will connect to the NVR device directly. You can delete repeater IPC only from the last level 4.8.1.6 3G 3G setup interface is shown as below. See Figure 4-174. Please refer to the following contents for the parameter information. Pane 1: Display 3G signal intensity after you enabled 3G function. Pane 2: Display 3G module configuration information after you enabled 3G function. Pane 3: Display 3G module status information after you enabled 3G function. It is to display current wireless network signal intensity such as EVDO, CDMA1x, WCDMA, WCDMA, EDGE and etc. 3G module: It is to display current wireless network adapter name. 3G Enable/Disable: Check the box here to enable 3G module. Network type: There are various network types for different 3G network modules. You can select according to your requirements. APN: It is the wireless connection server. It is to set you access the wireless network via which method. AUTH: It is the authentication mode. It supports PAP/CHAP. Dial number: Please input 3G network dialup number you got from your ISP. User name: It is the user name for you to login the 3G network. Password: It is the password for you to login the 3G network. Pulse interval: You can set dialup duration. Once you disable the extra stream, the connection time begins. For example, if you input 5 seconds here, then 3G network connection period is 5 seconds. The device automatically disconnect when time is up. If there is no extra stream, 3G network connection is valid all the time. If the alive time is 0, then the 3G network connection is valid all the time. Dial: Here you can enable or disable 3G network connection/disconnection manually. 3G wireless network: Here is to display wireless network status, SIM card status, dial status. If the 3G connection is OK, then you can see the device IP address the wireless network automatically allocates. 172 1 2 3 Figure 4-174 4.8.1.7 PPPoE PPPoE interface is shown as in Figure 4-175. Input PPPoE name and PPPoE password you get from your ISP (Internet service provider). Click save button, you need to restart to activate your configuration. After rebooting, NVR will connect to internet automatically. The IP in the PPPoE is the NVR dynamic value. You can access this IP to visit the unit. 173 Figure 4-175 4.8.1.8 DDNS DDNS (Dynamic Domain Name Server) is to dynamically refresh the DNS domain name and IP address if the device IP address has changed frequently. The user can use the domain to access the device. Preparation Before the operation, make sure the device supports DNS type and go to the DDNS service provider website to register the domain name via the PC. After you register the device and log in the DDNS website, you can view all connected device information of the current user. Step 1 Enter from main memu > Setup > Network > DDNS. DDNS setup interface is shown as in Figure 4-176. 174 Figure 4-176 Step 2 Select the Enable check box to enable DDNS function. When DDNS is enabled, the third-party server might collect your device information. Step 3 Configure the DDNS parameters according to practical situation. Type/address:

Dyndns DDNS is members.dyndns.org. NO-IP DDNS is dynupdate.no-ip.com. CN99 DDNS is members.3322.org. Domain: The domain name registered on the DDNS service provider website. User name/password: Input the user name and password got from the DDNS service provider. Make sure you have logged in the DDNS service provider website to register an account (user name and password). Interval: After DDNS boots up, it sends out refresh query regularly. The unit is minute. Step 4 Click Apply or Save to complete setup. Step 5 Open a browser and input domain name, click Enter key. The setting is right if you can view device WEB interface. Otherwise, please check the parameters. 4.8.1.9 UPnP The UPNP protocol is to establish a mapping relationship between the LAN and the WAN. Please input the router IP address in the LAN in Figure 4-163. See Figure 4-177. UPNP on/off :Turn on or off the UPNP function of the device. 175 Status: When the UPNP is offline, it shows as Unknown. When the UPNP works it shows Success Router LAN IP: It is the router IP in the LAN. WAN IP: It is the router IP in the WAN. Port Mapping list: The port mapping list here is the one to one relationship with the routers port mapping setting. List:

Service name: Defined by user. Protocol: Protocol type External port: Port that has been mapped locally. Internal port: Port that has been mapped in the router. Default: UPNP default port setting is the HTTP, TCP and UDP of the NVR. Add to the list: Click it to add the mapping relationship. Delete: Click it to remove one mapping item. Double click one item; you can change the corresponding mapping information. See Figure 4-178. Important:

When you are setting the router external port, please use 1024~5000 port. Do not use well-known port 1~255 and the system port 256~1023 to avoid conflict. For the TCP and UDP, please make sure the internal port and external port are the same to guarantee the proper data transmission. Figure 4-177 176 Figure 4-178 4.8.1.10 Email The email interface is shown as below. See Figure 4-179. SMTP server: Please input your email SMTP server IP here. Port: Please input corresponding port value here. User name: Please input the user name to login the sender email box. Password: Please input the corresponding password here. Sender: Please input sender email box here. Title: Please input email subject here. System support English character and Arabic number. Max 32-digit. Receiver: Please input receiver email address here. System max supports 3 email boxes. System automatically filters same addresses if you input one receiver repeatedly. SSL enable: System supports SSL encryption box. Health email enable: Please check the box here to enable this function. This function allows the Interval: The send interval ranges from 0 to 3600 seconds. 0 means there is no interval. system to send out the test email to check the connection is OK or not. Interval: Please check the above box to enable this function and then set the corresponding interval. System can send out the email regularly as you set here. Click the Test button, you can see the corresponding dialogue box to see the email connection is OK or not. Please note system will not send out the email immediately when the alarm occurs. When the alarm, motion detection or the abnormity event activates the email, system sends out the email according to the interval you specified here. This function is very useful when there are too many emails activated by the abnormity events, which may result in heavy load for the email server. 177 Figure 4-179 4.8.1.11 SNMP SNMP is an abbreviation of Simple Network Management Protocol. It provides the basic network management frame of the network management system. SNMP is widely used in various scenarios, network devices, software and systems. Preparation:

Obtain the corresponding MIB file from the technical support. Step 1 Enter from main menu > Setup > Network > SNMP. The SNMP interface is displayed. See Figure 4-180. Install SNMP monitor and management tool, such as MIB Builder and MG-SOFT MIB Browser. 178 Step 2 Select the SNMP check box. Step 3 Configure the parameyers. For details, see the following table. Figure 4-180 Parameter Version SNMP Port Read Community/Write Community Trap Address Trap Port Read Only User Read/Write User Authentication Password Encryption Type Description Select the check box of the corresponding version. System selects V3 by default. There might be risks for V1 and V2. Enter the SNMP port number. The read community/write community string supported by the program. Enter the IP address of the PC installed with MG-SOFT MIB Browser. It is the destination address to receive trap information from the device. The destination port to receive trap information from the device. Enter the read only username to access the NVR device. Enter the read/write username to access the NVR device. It includes MD5 and SHA. System automatically recognizes it after it is enabled. Enter the password for encryption and authentication. The password shall be no less than 8 characters. Select the encryption type. The default type is CBC-DES. Step 4 Click OK to complete the configuration. Step 5 View device info. 1) Run MIB Builder and MG-SOFT MIB Browser. 179 2) Compile the two MIB files with MIB Builder. 3) Load the compiled module to the software with MG-SOFT MIB Browser. 4) Enter the PC IP address into MG-SOFT MIB Browser and select the version to search. 5) Expand the tree list in MG-SOFT MIB Browser to view the device configuration information, such as channel number and program version. 4.8.1.12 Multicast When multiple users preview the video of a channel through the network at the same time, due to network bandwidth limitation, they might be unable to preview. You can set a multicast IP for NVR device

(224.0.0.0 - 238.255.255.255) and adopt the way of multicast protocol access to solve the problem. Step 6 Enter from main menu > Setup > Network > Multicast. The Multicast interface is shown as in Figure 4-181. Step 7 Select the Enable check box to enable this function. Step 8 Configure the parameters. For details, see the following table. Figure 4-181 Parameter IP Address Port the multicast Description Enter IP

(224.0.1.0-238.255.255.255). Enter the multicast port number to access the device (1025-65000). address access the to device Step 9 Click Apply or OK to complete the setting. After configuring the multicast, you can log in Web with multicast. Log in Web. In the Type drop-down list, select Milticast. See Figure 4-182. System will automatically obtain the multicast address and join the muiticast goup. Open the monitor and you can view the video in multicast way. 180 4.8.1.13 Alarm Centre This interface is reserved for you to develop. See Figure 4-183. Figure 4-182 Figure 4-183 4.8.1.14 Auto register This function allows the device to auto register to the proxy you specified. In this way, you can use the client-end to access the NVR and etc via the proxy. Here the proxy has a switch function. In the network service, device supports the server address of IPv4 or domain. Please follow the steps listed below to use this function. Please set proxy server address, port, and sub-device name at the device-end. Please enable the auto register function, the device can auto register to the proxy server. 181 1) The setup interface is shown as in Figure 4-184. Important Do not input network default port such as TCP port number. Figure 4-184 2) The proxy server software developed from the SDK. Please open the software and input the global setup. Please make sure the auto connection port here is the same as the port you set in the previous step. 3) Now you can add device. Please do not input default port number such as the TCP port in the mapping port number. The device ID here shall be the same with the ID you input in Figure 4-184. Click Add button to complete the setup. 4) Now you can boot up the proxy server. When you see the network status is Y, it means your registration is OK. You can view the proxy server when the device is online. Important The server IP address can also be domain. But you need to register a domain name before you run proxy device server. 4.8.1.15 P2P You can use your cell phone to scan the QR code and add it to the cell phone client. Via the SN from scanning the QR code, you can access the device in the WAN. Please refer to the P2P operation manual included in the resources CD. From main menu->Setting->Network->P2P, you can go to the following interface, the P2P interface is shown as in Figure 4-185. 182 Figure 4-185 Here we use cell phone APP to continue. Step 1 Use cell phone to scan the QR code and download the APP. Step 2 After installation, run the APP and Live Preview, enter the main interface. Now you can add device to the APP. 1. Open App; tap to go to the Live preview. 2. Tap 3. Tap Device manager button, you can use several modes (P2P/DDNS/IP and etc.) to add at the top left corner, you can see the main menu. the device. Click video from the connected device. See Figure 4-186. to save current setup. Tap Start Live preview to view all-channel 183 Figure 4-186 4.8.1.16 Easy Space This function allows you to upload motion detect record or snapshot image to the dropbox and etc. The easy space interface is shown as below. See Figure 4-187. Please select the easy space address from the dropdown list and then input corresponding user name and password. Note:

Figure 4-187 184 The uploaded file is for sub stream only. Please go to record control interface (main stream->setting->Storage->Record) and then select sub stream. The easy space function uses upload bandwidth. Usually the recommended upload bandwidth shall be more than 512kbps and please make sure the network is stable. The easy space upload data adopts safe SSL encryption connection. Please enable 1-channel to upload in case this function occupies too much CPU. 4.8.1.17 SWITCH When connect a network camera to the PoE port of the NVR, NVR can automatically allocate the IP address according to the specified IP segment. The network camera can automatically register to the NVR. It is for you to set IP address, subnet mask, gateway and etc of the Switch. See Figure 4-188. Caution This function is for product of PoE port. Do not connect switch to the PoE port, otherwise the connection may fail. The SWITCH function of the NVR is enabled by default. The IP segment is 10.1.1.1. Usually we recommend the default setup. For the camera from the third party, make sure the camera supports ONVIF and DHCP function is enabled. Refer to the following table for PoE notice. Type Note Figure 4-188 185

Note After connect the camera to the PoE, NVR allocate an IP address in the specified IP segment to the camera. NVR tries to use arp ping to set. If the NVR has enabled the DHCP function, it uses DHCP to set. After successfully set IP address, NVR can send out broadcast via the switch and get the corresponding response. Now The camera has registered to the NVR. Go to the preview interface, the corresponding channel has been used and there is a small PoE icon at the top left corner. Go to the Register interface to view the connected device list, you can see the PoE channel number, PoE port information and etc. Click IP search to display or refresh the information. After remove the camera network cable from the PoE port, the channel displays Cannot find the network host. On the registration interface, the IP address is shown as offline. The PoE port and the channel window is one to one correspondence. For example, connect a network camera to PoE port 1, it register to channel 1 by default. Type Connect camera to the PoE from Remove camera the PoE port The mapping policy when connect a camera to the PoE port. 4.8.2 Network Test In this interface, you can see network test and network load information. 4.8.2.1 Network Test From main menu->Info-Network->Test, the network test interface is shown as in Figure 4-189. Destination IP: Please input valid IPV4 address and domain name. Test: Click it to test the connection with the destination IP address. The test results can display average delay and packet loss rate and you can also view the network status as OK, bad, no connection and etc. Network Sniffer backup: Please insert USB2.0 device and click the Refresh button, you can view the device on the following column. You can use the dropdown list to select peripheral device. Click Browse button to select the snap path. The steps here are same as preview backup operation. You can view all connected network adapter names (including Ethernet, PPPoE, Wi-Fi, and 3G), you can click the button on the right panel to begin Sniffer. Click the grey stop button to stop. Please note system cannot Sniffer several network adapters at the same time. After Sniffer began, you can exit to implement corresponding network operation such as login WEB, monitor. Please go back to Sniffer interface to click stop Sniffer. System can save the packets to the specified path. The file is named after Network adapter name+time. You can use software such as Wireshark to open the packets on the PC for the professional engineer to solve complicated problems. 186 Figure 4-189 4.8.2.2 Network Load From main menu->Info-Network->Load, network load is shown as in Figure 4-190. Here you can view the follow statistics of the device network adapter. Here you can view information of all connected network adapters. The connection status is shown as offline if connection is disconnected. Click one network adapter, you can view the flow statistics such as send rate and receive rate at the top panel. Note It is to display LAN1 network load by default. View one LAN network load by one time. 187 Figure 4-190 4.9 Storage Here you can view HDD information such as type, status, total capacity, record time and etc. The operation includes format, resume from error, change HDD property (Read write, Read-only). Here you can also set alarm and HDD storage position. 4.9.1 Basic It is to manage HDD storage space. Step 1 From main menu->Setup->Storage->Basic. Enter Basic interface. See Figure 4-191. 188 Figure 4-191 Step 2 Set parameters. HDD full: It is to select working mode when hard disk is full. There are two options: stop recording or rewrite. Pack duration: It is to specify record duration. The max length is 120 minutes. Auto delete old files:

Never: Do not auto delete old files. Customized: input customized period here and system can auto delete corresponding old files. The deleted file cannot be restored. Step 3 Click Apply or Save to complete setup. 4.9.2 Schedule It is to set schedule record and schedule snapshot. NVR can record or snapshot as you specified. For detailed information, please refer to chapter 4.1.4.6.1 schedule record and 4.1.4.6.2 schedule snapshot. 4.9.3 HDD It is to view and sett HDD properties and format HDD. It is to view current HDD type, status, capacity and etc. The operation includes format HDD, and change HDD property (read and write/read-only/redundancy). To prevent files be overwritten in the future, you can set HDD as read-only. To backup recorded video file, you can set HDD as redundant HDD. Step 1 From Mani-menu->Setting->Storage->HDD Manager, you can go to HDD management interface. 189 See Figure 4-192. Figure 4-192 Step 2 Select a HDD and then select an time from the dropdown list. Click Execute button. Step 3 Click OK button to complete the setup. You can see system needs to restart to activate current setup if you want to format the HDD. 4.9.4 FTP It is to backup record file or image to the FTP to storage or view. Before the operation, please download or purchase the FTP service tool and install on the PC. Note For the FTP user, please set FTP folder write right, otherwise system cannot upload the image. Step 1 From main menu->Setting->Storage->FTP, enter FTP interface. See Figure 4-193. Step 2 Select the Enable check box to enable FTP function. Select FTP type. FTP transmits data with clear text mode and SFTP transmits data with encrypted mode. SFTP is recommended. Step 3 Set parameters. Here you can input FTP server address, port and remote directory. When remote directory is null, system automatically creates folders according to the IP, time and channel. Port: The default SFTP port number is 22 and the default FTP port number is 21. IP address: The host IP you have installed the FTP server. 190 User name/Password: The account for you to access the FTP server. Remote directory: The folder you created under the root path of the FTP according to the corresponding rule. If there is no remote directory, system can auto create different directories according to the IP, time and channel. If there is remote directory, system can create corresponding folder under the FTP root path and then create different folders according to IP address, time and channel. File length: File length is upload file length. When setup is larger than the actual file length, system will upload the whole file. When setup here is smaller than the actual file length, system only uploads the set length and auto ignore the left section. When interval value is 0, system uploads all corresponding files. Image upload interval: It is the image upload interval. If the image upload interval is larger than the image snapshot frequency, system just uploads the lasted image. If the image interval is 5 seconds and the snapshot frequency is 2 seconds, system will send out the latest image at the buffer at 5 seconds. If the image upload interval is smaller than the snapshot frequency, system will upload at the snapshot frequency. For example, if the image interval is 5 seconds and the snapshot frequency is 10 seconds, system will send out the image at 10 seconds. From main menu->Setting->Camera->Encode->Snapshot to set snapshot frequency. Channel: Select a channel from the dropdown list and then set week, period and record type. Week day/Period: Please select from the dropdown list and for each day, you can set two periods. Type: Please select uploaded record type (Alarm/intelligent/motion detect/regular). Please check the box to select upload type. Step 4 Click the Test button, you can see the corresponding dialogue box to see the FTP connection is OK or not. Step 5 Click Apply or Save to complete setup. 191 Figure 4-193 4.9.5 Record Control After you set schedule record or schedule snapshot function, please set auto record/snapshot function so that the NVR can automatically record or snapshot. For detailed information, please refer to chapter 4.1.4.6.3 record control. 4.9.6 HDD Information Here is to list hard disk type, total space, free space, and status. See Figure 4-194. means current HDD is normal.. - means there is no HDD. If disk is damaged, system shows as ?. Please remove the broken hard disk before you add a new one. In Figure 4-194, click one HDD item, the S.M.A.R.T interface is shown as in Figure 4-195. Figure 4-194 192 Parameter SATA SN Figure 4-195 Function 1 here means there is 1 HDD. For different series product, the max HDD amount may vary, When HDD is working properly, system is shown as O. _ means there is no HDD. You can view the HDD amount the device connected to;

means the second HDD is current working HDD. Type The corresponding HDD property. Total space The HDD total capacity. Free space The HDD free capacity. Status HDD can work properly or not. Bad track Display there is bad track or not. Page up Click it to view previous page. Page down Click it to view the next page. Click it to view HDD record information (file start time and end time). Click it to view HDD property, status and etc, View recording time HDD and View type capability 193 4.9.7 HDD Group It is to set HDD group, and HDD group setup for main stream, sub stream and snapshot operation. Caution When you are setting HDD group, please set a HDD for each channel, otherwise NVR cannot save current setup. The main stream is shown as in Figure 4-196. HDD: Here you can view the HDD amount the device can support. Group: It lists the HDD Group number of current hard disk. Figure 4-196 Please select the correspond group from the dropdown list and then click Apply button. Click sub stream/snapshot button to set corresponding HDD group information. 4.9.8 HDD Detect Note This function is for some series product only. The HDD detect function is to detect HDD current status so that you can clearly understand the HDD performance and replace the malfunction HDD. There are two detect types:

Quick detect is to detect via the universal system files. System can quickly complete the HDD scan. If you want to use this function, please make sure the HDD is in use now. If the HDD is removed from other device, please make sure the write-data once was full after it installed on current device. Global detect adopts Windows mode to scan. It may take a long time and may affect the HDD 194 that is recording. 4.9.8.1 Manual Detect From main menu->Setting->Storage->HDD Detect->Manual Detect, the interface is shown as below. See Figure 4-197. Please select detect type and HDD. Click start detect to begin. You can view the corresponding detect information. Figure 4-197 4.9.8.2 Detect Report After the detect operation, you can go to the detect report to view corresponding information. From main menu->Setting->Storage->HDD Detect->Manual Detect, the interface is shown as below. See Figure 4-198. 195 Figure 4-198 Click View, you can see the detailed information such as detect result, backup and S.M.A.R.T. See Figure 4-199 and Figure 4-200. Figure 4-199 196 Figure 4-200 4.9.9 RAID Manager RAID (redundant array of independent disks) is a data storage virtualization technology that combines multiple physical HDD components into a single logical unit for the purposes of data redundancy, performance improvement, or both. Note RAID function is for some series product only. Slight difference may be found on the user interface. Right now, NVR supports RAID0, RAID1, RAID5, RAID6, and RAID 10. Local hotspare supports RAID1, RAID5, RAID6, and RAID10. Refer to the following table for detailed information. RAID Type RAID0 RAID1 RAID5 RAID6 RAID10 HDD Amount At least 2 HDDs. Only 2 HDDs. At least 3 HDDs. Usually recommend the RAID5 consists of 4 to 6 HDDs. At least 4 HDDs. At least 4 HDDs. 4.9.9.1 RAID Config It is for you to manage RAID HDD. It can display RAID name, type, free space, total space, status and etc. Here you can add/delete RAID HDD. Click Add button to select RAID type and then select HDDs, click OK button to add. See Figure 4-201. 197 One click to create RAID Click it to automatically create RAID5. For create RAID function, you can select the physical HDD that does not included in the RAID group or the created disk array to create a RAID5. You can refer to the following situations:

There is no RAID, no hotspare disk: System directly creates the RAID5 and creates one hotspare disk at the same time. There is no RAID, but there is a hotspare disk: System creates the RAID5 only. It uses previous hotspare disk. There is RAID: System cancel the previous RAID setup and then create the new RAID5. System creates the hotspare disk if there is no one. System uses previous hotspare disk if there is hotspare disk available. The background will format the virtual disk. Create manually Step 1 Select RAID type first and then follow the prompts to set HDD amount. Step 2 Click Create Manually button, system pops up dialogue box to warning you it is going to clear all data. Step 3 Click OK button to complete the operation. Note Click to delete RAID. Figure 4-201 4.9.9.2 Hotspare disks When a HDD of the RAID group is malfunction or abnormal, the hotspare HDD can replace the malfunction or abnormal HDD in case there is any data loss. It is to guarantee storage system reliability. Click Hotspare disks tab name, you can add the hot spare HDD. See Figure 4-202. The type includes two options:

198 Global: It is global hotspare disk. When any RAID becomes degrading, it can replace and build the RAID. Local: It is local hotspare disk. When the specified RAID becomes degrading, it can replace and build the RAID. Select a hot spare device and then click Delete button. Click Apply button to delete. Figure 4-202 4.10 Device Maintenance and Manager 4.10.1 Account It is to manage users, user group and ONVIF user, set admin security questions. Note For the user name, the string max length is 31-byte, and for the user group, the string max length is 15-byte. The user name can only contain English letters, numbers and _@.. The default user amount is 64 and the default group amount is 20. System account adopts two-level management: group and user. The user authorities shall be smaller than group authorities (The admin user authorities are set by default). For group or user management, there are two levels: admin and user. The user name shall be unique and one user shall only belong to one group. 4.10.1.1 User 4.10.1.1.1 Add User Step 1 From main menu->Setting->System->Account->User. Enter user interface. See Figure 4-203. 199 Step 2 Click Add user button in Figure 4-203. The interface is shown as in Figure 4-204. Figure 4-203 Step 3 Input the user name, password, select the group it belongs to from the dropdown list. Then you Figure 4-204 200 can check the corresponding rights for current user. Note For convenient user management, usually we recommend the general user right is lower than the admin account. Step 4 Click the Set button after the period, you can set valid period to use current account. See Figure 4-205. Step 5 Click Set button, you can set six periods in one day. See Figure 4-206. Step 6 Check the box after the period, you can enable current setup. Figure 4-205 Note Check the box before the week; it is to save period settings to selected week day. 201 Figure 4-206 Step 7 Click OK button. 4.10.1.1.2 Modify user From main menu->Setting->System->Account->User, click change user information. See Figure 4-207.

, you can go to the following interface to 202 For admin user, you can change the email, enable/disable unlock pattern, change password prompt question, set security questions. See Figure 4-208. Figure 4-207 Figure 4-208 Input email information and then click Save, it is to set/change email address. Check the box to enable unlock pattern and then click Set security question Step 1 Click Security question, enter the following interface. See Figure 4-209.

, click Save to change unlock pattern. 203 Figure 4-209 Step 2 Input answers and then click Save button. After successfully set security questions, you can answer the security questions to reset admin password. Note Select security questions from the dropdown list and then input the proper answers, click Delete button to reset security questions and answers again. 4.10.1.1.3 Change Password In Figure 4-207, check the Modify password box, you can change password. Please input old password, and then input new password twice to confirm. Password/confirm password: The password ranges from 8 to 32 digitals. It can contain letters, numbers and special characters (excluding ',",;,:,&) . The password shall contain at least two categories. Usually we recommend the strong password. WARNING STRONG PASSWORD RECOMMENDED-For your device own safety, please create a strong password of your own choosing. We also recommend you change your password periodically especially in the high security system. 4.10.1.2 Modify Group Step 1 From main menu->Setting->System->Account->Group. Enter add group interface. See Figure 4-210. 204 Figure 4-210 Step 2 Click add group button in Figure 4-210. Step 3 Enter Add group the interface. See Figure 4-211. Input group name and then input some memo information if necessary. Check the box to select authorities. Figure 4-211 205 4.10.1.3 Security Question Note This function is for admin user only. Here you can change security questions. After you successfully answered security questions, you can reset admin account password. From main menu->Setting->System->Account->Security question, the interface is shown as below. See Figure 4-212. Input correct security answers and then click Delete button at the bottom of the interface, you can reset security questions and answers. Figure 4-212 4.10.1.4 ONVIF User When the camera from the third party is connected with the NVR via the ONVIF user, please use the verified ONVIF account to connect to the NVR. Here you can add/delete/modify user Note The default ONVIF user is admin. It is created after you initialize the NVR. Step 1 From main menu->Setting->System->Account->ONVIF User. Enter ONVIF interface. See Figure 4-213. 206 Step 2 Click Add User button. Enter Add User interface. See the following figure. Figure 4-213 Step 3 Set user name, password and then select group from the dropdown list. Step 4 Click Save to complete setup. Figure 4-214 Note 207 Click to change user information, click to delete current user. 4.10.1.5 Online User Here is for you manage online users connected to your NVR. See Figure 4-215. You can click button System detects there is any newly added or deleted user in each five seconds and refresh the list automatically. to disconnect or block one user if you have proper system right. Figure 4-215 4.10.2 System Info 4.10.2.1 Version From main menu->Info->System->version, you can go to version interface. It is to view NVR version information. Slight different may be found on the user interface. 4.10.2.2 BPS Here is for you to view current video bit rate (kb/s) and resolution. See Figure 4-216. 208 Figure 4-216 4.10.2.3 Event Information 4.10.2.3.1 Alarm Status From main menu->info-Event, here you can view the channel status of the remote device, connection log and etc. See Figure 4-217. Figure 4-217 209 4.10.2.3.2 People Counting This function allows system to detect the people flow amount in the specified zone and display the people amount statistics image. From main menu->Info->Event->People Counting, you can go to the following interface. See Figure 4-218. Channel: Please select a channel from the dropdown list. Type: Please select report type from the dropdown list. It includes daily report/monthly report/annual report. You can click to select histogram or polygon chart. Start time/end time: Input start time and end time of the people counting. Enter: Check to search enter amount. Exit: Check the box to search exit amount. Display No.: Check the box, system can display enter and exit people amount in the report. Figure 4-218 4.10.2.3.3 Heat Map It is to search and view the heat map of each channel. From main menu->Info->Event->Heat Map, you can go to the following interface. See Figure 4-219. Select a channel, input start time and end time. Please note the report search period shall be within one month. Click Search button, you can view the heat map report. 210 Figure 4-219 4.10.3 Voice The audio function is to manage audio files and set schedule play function. It is to realize audio broadcast activation function. Note This function is for some series product only. 4.10.3.1 File Manage Here you can add audio file, listen to the audio file, or rename/delete audio file. Here you can also set audio volume. See Figure 4-220. 211 Figure 4-220 Click Add button, you can add audio file and import the audio file via the USB device. The audio file format shall be MP3 or PCM. See Figure 4-221. Note The file size shall be 2K-10MB. 4.10.3.2 Schedule Figure 4-221 212 It is to set schedule broadcast function. You can play the different audio files in the specified periods. See Figure 4-222. Figure 4-222 4.10.4 RS232 After setting RS232 parameters, the NVR can use the COM port to connect to other device to debug and operate. From Main menu->Setting->System->RS232, RS232 interface is shown as below. There are five items. See Figure 4-223. Function: There are various devices for you to select. Console is for you to use the COM or mini-end software to upgrade or debug the program. Control keyboard is for you to control the device via the special keyboard. Transparent COM (adapter) is to connect to the PC to transfer data directly. Protocol COM is for card overlay function. Network keyboard is for you to use the special keyboard to control the device. PTZ matrix is to connect to the peripheral matrix control. Note Different series products support different RS232 functions. Please refer to the actual product for detailed information. Baud rate: You can select proper baud rate. Data bit: You can select proper data bit. The value ranges from 5 to 8. Stop bit: There are three values: 1/1.5/2. Parity: there are five choices: none/odd/even/space mark. System default setup is:

Function: Console 213 Baud rate:115200 Data bit:8 Stop bit:1 Parity: None After completing all the setups please click save button, system goes back to the previous menu. Figure 4-223 4.10.5 Broadcast It is to broadcast to the camera, or broadcast to a channel group. Step 1 From Mani menu->Setting->System->Broadcast. Enter the following interface. See Figure 4-224. 214 Step 2 Click Add group. Enter add group interface. See Figure 4-225. Figure 4-224 Step 3 Input group name and select one or more channels. Figure 4-225 215 Step 4 Click Save button to complete broadcast group setup. Note On the broadcast interface, click to change group setup, click to delete group. After complete broadcast setup, on the preview interface and then click bar, device pops up broadcast diaologue box. Select a group name and then click begin broadcast. See Figure 4-226. on the navigation to Figure 4-226 4.10.6 Security 4.10.6.1 IP Filter IP filter interface is shown as in Figure 4-227. You can add IP in the following list. The list supports max 64 IP addresses. System supports valid address of IPv4 and IPv6. Please note system needs to check the validity of all IPv6 addresses and implement optimization. After you enabled trusted sites function, only the IP listed below can access current NVR. If you enable blocked sites function, the following listed IP addresses cannot access current NVR. Enable: Highlight the box here, you can check the trusted site function and blocked sites function. You cannot see these two modes if the Enable button is grey. Type: You can select trusted site and blacklist from the dropdown list. You can view the IP address on the following column. Start address/end address: Select one type from the dropdown list, you can input IP address in the start address and end address. Now you can click Add IP address or Add IP section to add. a) For the newly added IP address, it is in enable status by default. Remove the before the item, 216 and then current item is not in the list. b) System max supports 64 items. c) Address column supports IPv4 or IPv6 format. If it is IPv6 address, system can optimize it. For example, system can optimize aa:0000: 00: 00aa: 00aa: 00aa: 00aa: 00aa as aa:: aa: aa: aa: aa:

aa: aa. d) System automatically removes space if there is any space before or after the newly added IP address. e) System only checks start address if you add IP address. System check start address and end address if you add IP section and the end address shall be larger than the start address. f) System may check newly added IP address exists or not. System does not add if input IP address does not exist. Delete: Click it to remove specified item. Edit: Click it to edit start address and end address. See Figure 4-228. System can check the IP address validity after the edit operation and implement IPv6 optimization. Default: Click it to restore default setup. In this case, the trusted sites and blocked sites are both null. Note If you enabled trusted sites, only the IP in the trusted sites list can access the device. If you enabled blocked sites, the IP in the blocked sites cannot access the device. System supports add MAC address. Figure 4-227 217 Figure 4-228 4.10.6.2 System Service The device supports to enable and disable various system internal services. Step 1 From main menu->System->Security ->System Service. The System Service interface is displayed. See Figure 4-229. Figure 4-229 Step 2 Configure the parameters. For details, see the below table. Parameter Password Reset Mobile Phone Push CGI ONVIF Description Enabled by default. If it is disabled, the user can only use the security questions to reset the password. Enabled by default. The snapped pictures triggered at the device can be push to the mobile app. Enabled by default. The device can be connected via this protocol when enabled. Enabled by default. 218 Parameter Description The device can be connected via this protocol when enabled. Audio/VideoEncryption The stream is enabled.The associated device or software shall support decryption. is encrypted when transmission function this Step 3 Click OK to complete the configuration. 4.10.7 Auto Maintain Here you can set auto-reboot time and auto-delete old files setup. You can set to delete the files for the specified days. See Figure 4-230. You can select proper setup from dropdown list. After all the setups please click save button, system goes back to the previous menu. Figure 4-230 4.10.8 Backup 4.10.8.1 File Backup In this interface, you can backup record file to the USB device. a) Connect USB burner, USB device or portable HDD and etc to the device. b) From Main menu->Backup, you can go to the Backup interface. See Figure 4-231 219 Figure 4-231 c) Select backup device and then set channel, file start time and end time. d) Click add button, system begins search. All matched files are listed below. System automatically calculates the capacity needed and remained. See Figure 4-232. e) System only backup files with a before channel name. You can use Fn or cancel button to delete after file serial number. f) Click backup button, you can backup selected files. There is a process bar for you reference. g) When the system completes backup, you can see a dialogue box prompting successful backup. Figure 4-232 220 h) Click backup button, system begins burning. At the same time, the backup button becomes stop button. You can view the remaining time and process bar at the left bottom. Note During backup process, you can click ESC to exit current interface for other operation (For some series product only). The system will not terminate backup process. The file name format usually is: Channel number+Record type+Time. In the file name, the YDM format is Y+M+D+H+M+S. File extension name is .dav. 4.10.8.2 Import/Export This function allows you to copy current system configuration to other devices. It also supports import, create new folder, and delete folder and etc function. From Main menu->Setting->System->Import/Export, you can see the configuration file backup interface is shown as below. See Figure 4-233. Export: Please connect the peripheral device first and then go to the following interface. Click Figure 4-233 Export button, you can see there is a corresponding Config_Time folder. Double click the folder, you can view some backup files. Import: Here you can import the configuration files from the peripheral device to current device. You need to select a folder first. You can see a dialogue box asking you to select a folder if you are selecting a file. System pops up a dialogue box if there is no configuration file under current folder. After successfully import, system needs to reboot to activate new setup. Format: Click Format button, system pops up a dialogue box for you to confirm current operation. System begins format process after you click the OK button. 221 Note System cannot open config backup interface again if there is backup operation in the process. System refreshes device when you go to the config backup every time and set current directory as the root directory of the peripheral device. If you go to the configuration backup interface first and then insert the peripheral device, please click Refresh button to see the newly added device. 4.10.8.3 Backup Log a) From Main menu->Info->Log, the interface is shown as below. See Figure 4-234. Figure 4-234 b) Select log type and then set start time/end time, click Search button, you can see log time and event information. Click to view detailed log information. c) Select log items you want to save and then click backup button, you can select a folder to save them. Click Start to backup and you can see the corresponding dialogue box after the process is finish. 4.10.8.4 USB Device Auto Pop-up After you inserted the USB device, system can auto detect it and pop up the following dialogue box. It allows you to conveniently backup file, log, configuration or update system. See Figure 4-235. Please refer to chapter 4.10.8.1 file backup, chapter 4.10.8.3 backup log, chapter 4.10.8.2 import/export, and chapter 4.6.2 search for detailed information. 222 Figure 4-235 4.10.9 Default Warning!

After you use default function, some your customized setup may lose forever! Please think twice before you begin the operation!

You can restore factory default setup to fix some problems when the device is running slowly. Configuration error occurred. From Main menu->Setting->System->Default, you can go to the default interface. See Figure 4-236. Check an item you want to restore default setup, or check the All to select all items. Click OK or apply button, system pops up a dialogue box. Click OK to restore. 223 Figure 4-236 4.10.10 Upgrade 4.10.10.1 File Update From Mani menu->Setting->Info->Update, you can go to the following interface. See Figure 4-237. Step 1 Step 2 Click Start button and then select the .bin file. Step 3 You can see the corresponding dialogue box after the update process is complete. Insert USB device that contain the upgrade file. 224 Figure 4-237 4.10.10.2 Online Upgrade When the NVR is online, you can use the online upgrade to update the firmware. Before the online upgrade, system needs to detect if any new version is available. It includes auto check and manual check. Auto check: System automatically detects if any new version is available once in a while. Manual check: Detect new version at real time. During the upgrade process, make sure that the network connection and power supply are normal. Step 1 Enter from main menu > Setup > System > Upgrade. The Upgrade interface is displayed. See Figure 4-238. 225 Figure 4-238 Step 2 Version check. Auto check: Select the Auto check for updates check box and click Save. Note System enables this function by default. Manual check: Click Manual Check. System starts to search new version and displays the result after the check is completed. When system displays that it is the latest version, the current version is the latest one and you do not need to upgrade it. When system displays the new version information ( including release date and upgrade notes), new version is available and go to Step 3. Step 3 Click Upgrade to upgrade the system. 4.10.10.3 Uboot When NVR boots up, during the uboot process, NVR automatically detects there is USB device and there is upgrade file on the USB device or not. If the detection result is OK, NVR automatically begins upgrade. CAUTION The USB device shall contain two files: u-boot.bin.img and update.img. The USB device shall connected to the USB port at the front panel. Otherwise, NVR cannot properly detect the file or upgrade. 4.11 Logout /Shutdown/Restart 226 From Mani menu->Operation->Shutdown, you can see an interface shown as in Figure 4-239. Shutdown: System shuts down and turns off power. Logout: Log out menu. You need to input password when you login the next time. Restart: reboot device. If you shut down the device, there is a process bar for your reference, system waits for 3 seconds and then shut down (You cannot cancel). Please note, sometimes you need to input the proper password to shut down the device. Figure 4-239 227 5 Web Operation 5.1 General Introduction If it is your first time to login the device, please initialize your device first. Refer to chapter 5.2 Device Initialization for detailed information. The device web provides channel monitor menu tree, search, alarm setup, system setup, PTZ control and monitor window and etc. Note Slight difference may be found on user interface. Please refer to the actual product for detailed information. Device supports various browsers such as Safari, Chrome and etc. Use ChromeApp to login the WEB if the Chrome version is 45 or higher. Go to the Chrome online store to download the ChromeApp installation package. 5.1.1 Preparation Step 1 PC and NVR connection is OK. Step 2 Set PC IP address, NVR IP address, subnet mask and gateway. Set the IP address of the same section for the PC and NVR. Input corresponding gateway and subnet mask if there are routers.) The device default IP address is 192.168.1.108. Step 3 Check the PC and device connection is OK or not. Refer to the following two ways to check the network connection is OK or not. When the PC and device network connection is OK, login the WEB via the PC. On PC, use order ping ***.***.***.***(NVR IP address) to check connection is OK or not. Login Usually the TTL value is 255. Login the device local menu, from setting->Network->Network test and then input PC IP address. Check the connection is OK or not. Step 4 Login the WEB. Refer to chapter 5.10 Login for detailed information. 5.2 Device Initialization If it is your first time to use the device, please set a login password of admin (system default user). Note For your device safety, please keep your login password of admin well after the initialization steps, and change the password regularly. Please follow the steps listed below. Step 1 Open the IE and then input the NVR IP address in the address column. Step 2 Click Enter button. Device displays device initialization interface. See Figure 5-1. 228 Figure 5-1 Step 3 Set login password of admin. User name: The default user name is admin. Password/confirm password: The password ranges from 8 to 32 digitals. It can contain letters, numbers and special characters (excluding ',",;,:,&) . The password shall contain at least two categories. Usually we recommend the strong password. WARNING STRONG PASSWORD RECOMMENDED-For your device own safety, please create a strong password of your own choosing. We also recommend you change your password periodically especially in the high security system. Step 4 Click Next, device goes to the following interface. See Figure 5-2. 229 Figure 5-2 Step 5 Set security questions. Note After setting the security questions here, you can use the email you input here or answer the security questions to reset admin password Refer to chapter 5.4 Reset password for detailed information. Cancel the email or security questions box and then click Next button to skip this step. Email: Input an email address for reset password purpose. Scan the QR code to reset the password, you need to receive the security code by the email. Input the security code to reset the password of admin. In case you have not input email address here or you need to update the email information, please go to the main Setup->System->Account to set. Refer to chapter 5.11.5.7 for detailed information. Security question: Set security questions and corresponding answers. Properly answer the questions to reset admin password. In case you have not input security question here or you need the main menu->Setting->System->Account->Security question to set. Refer to chapter 4.10.1.3 Security question for detailed information. information, please go the security question to update to Note If you want to reset password by answering security questions, please go to the local menu interface. Step 6 Click OK to complete the device initialization setup. See Figure 5-3. 230 Figure 5-3 5.3 Log in Open the IE and then input the NVR IP address in the address column. For example, if your NVR IP address is 192.168.1.108, then please input http:// 192.168.1.108 in IE address column. See Figure 5-4. Input address here. IP Figure 5-4 System pops up warning information to ask you whether install Web plug-in or not. Please click yes button. After installation, the interface is shown as below. See Figure 5-5. 231 Figure 5-5 Please input your user name and password. Factory default user name is admin and password is what you set in chapter 5.2 Device initialization. 5.4 Reset Password If you forgot admin password, you can reset the password by email or by answering the security questions (local menu only). When the password reset function is enabled, you can scan the QR code on the Web to reset the password. When the password reset function is disabled, you can reset password via the security questions configured before. If the secury questions are not configured, system displays that Password reset is closed! You need to contact the customer service for help. Step 1 Go to the device login interface. See Figure 5-5. Step 2 Click Forgot password. If you have set the reserved email, system displays a notice before the password reset. See Figure 5-6. If you have not set the reserved email, a dialogue box pops up that asks you to reset the password by clicking Forgot password on the local interface. 232 Step 3 Click OK. System enters the following interface. See Figure 5-7. Figure 5-6 Note After clicking OK, we will collect your personal information such as cell phone number, MAC address and device serial number. The collected information is used for verifying device legality and sending security code. Please read the notice carefully and confirm if you agree with the collection or not. 233 Step 4 Follow the prompts on the interface and then scan the QR code to get the security code. Figure 5-7 WARNING For the same QR code, max scan twice to get two security codes. Refresh the QR code if you want to get security code again. The security code on you email is only valid for 24 hours. After five times security code failure, the admin account will be locked for 5 minutes. Input the security code on the email and then click Next button. Input new password and then confirm. Step 5 Step 6 WARNING The password can be set from 8 characters through 32 characters and contain at least two types from number, letter and special character (excluding"'", """, ";", ":" and "&"). It is recommended to set password of high security according to the prompts. Step 7 Click OK button to complete the setup. 5.5 LAN Mode For the LAN mode, after you logged in, you can see the main window. See Figure 5-13. This main window can be divided into the following sections. Section 1: there are six function buttons: Live (chapter 5.6), setup (chapter 5.11), info (Chapter 5.12), playback (chapter 5.13), alarm (chapter 5.15), and logout (chapter 5.16). Section 2: There are monitor channels successfully connected to the NVR. Please refer to Figure 5-8 for main stream and extra stream switch information. 234 Figure 5-8 Section 3: Open all. Open all button is to enable/disable all-channel real-time monitor. Here you can select main stream/sub stream too. See Figure 5-9. Figure 5-9 Section 4: Start Talk button. You can click this button to enable audio talk. Click to select bidirectional talk mode. There are four options: DEFAULT, G711a, G711u and PCM. See Figure 5-10. After you enable the bidirectional talk, the Start talk button becomes End Talk button and it becomes yellow. Please note, if audio input port from the device to the client-end is using the first channel audio input port. During the bidirectional talk process, system will not encode the audio data from the 1-channel. Figure 5-10 Section 5: Instant record button. Click it, the button becomes yellow and system begins manual record. See Figure 5-11. Click it again, system restores previous record mode. Figure 5-11 Section 6: Local play button. The Web can playback the saved (Extension name is dav) files in the PC-end. Click local play button, system pops up the following interface for you to select local play file. See Figure 5-12. 235 Figure 5-12 Section 7: Zero-channel encoding. Please refer to chapter 5.9 for detailed information. Section 8: PTZ operation panel. Please refer to chapter 5.7 for detailed information. Section 9: Image setup and alarm setup. Please refer to chapter 5.8 for detailed information. Section 10: From the left to the right ,you can see video quality/fluency/ full screen/1-window/4-window/6-window/8-window/9-window/13-window/16-window/20-window/25-win dow/36-window.. You can set video fluency and real-time feature priority. Figure 5-13 5.6 Real-time Monitor In section 2, left click the channel name you want to view, you can see the corresponding video in current window. On the top left corner, you can view device IP(172.11.10.11), channel number(1), network monitor bit stream(2202Kbps) and stream type(M=main stream, S=sub stream). See Figure 5-14. 1 2 3 4 236 On the top right corner, there are six unction buttons. See Figure 5-15. Figure 5-14 1 2 3 4 5 Figure 5-15 1: Digital zoom: Click this button and then left drag the mouse in the zone to zoom in. right click mouse system restores original status. 2: Local record. When you click local record button, the system begins recording and this button becomes highlighted. You can go to system folder RecordDownload to view the recorded file. 3: Snapshot picture. You can snapshot important video. All images are memorized in system client folder PictureDownload (default). 4: Audio :Turn on or off audio.(It has no relationship with system audio setup ) 5: Close video. 5.7 PTZ Before PTZ operation, please make sure you have properly set PTZ protocol. (Please refer to chapter 5.11.5.4). There are eight direction keys. In the middle of the eight direction keys, there is a 3D intelligent positioning key. Click 3D intelligent positioning key, system goes back to the single screen mode. Drag the mouse in the screen to adjust section size. It can realize PTZ automatically. Please refer to the following sheet for PTZ setup information. Parameter Function Scan Select Scan from the dropdown list. Click Set button, you can set scan left and right limit. Use direction buttons to move the camera to you desired location and then click left limit button. Then move the camera again and then click right limit button to set a right limit. Preset Select Preset from the dropdown list. Turn the camera to the corresponding position and Input the preset value. Click Add button to add a preset. 237 Parameter Function Tour Select Tour from the dropdown list. Input preset value in the column. Click Add preset button, you have added one preset in the tour. Repeat the above procedures you can add more presets in one tour. Or you can click delete preset button to remove one preset from the tour. Select Pattern from the dropdown list. You can input pattern value and then click Start button to begin PTZ movement such as zoom, focus, iris, direction and etc. Then you can click Add button to set one pattern. Please input the corresponding aux value here. You can select one option and then click AUX on or AUX off button. You can turn on or turn off the light/wiper. Pattern Aux Light and wiper 3D Intelligent Positioning Key You can click this icon to display or hide the PTZ control platform. Figure 5-16 5.8 Image/Alarm-out 238 Image Select one monitor channel video and then click Image button in section 9, the interface is shown as Figure 5-17. 5.8.1 Here you can adjust its brightness, contrast, hue and saturation. (Current channel border becomes green). Or you can click Reset button to restore system default setup. Figure 5-17 5.8.2 Alarm output Here you can enable or disable the alarm signal of the corresponding port. See Figure 5-18. Figure 5-18 5.9 Zero-channel Encode Select a window and then click zero-channel encode button, the interface is shown as below. See Figure 5-19. 239 Figure 5-19 5.10 WAN Login In WAN mode, after you logged in, the interface is shown as below. See Figure 5-20. Figure 5-20 Please refer to the following contents for LAN and WAN login difference. 1) In the WAN mode, system opens the main stream of the first channel to monitor by default. The open/close button on the left pane is null. 2) You can select different channels and different monitor modes at the bottom of the interface. See 240 Figure 5-21. Figure 5-21 Important The window display mode and the channel number are by default. For example, for the 16-channel, the max window split mode is 16. 3) Multiple-channel monitor, system adopts extra stream to monitor by default. Double click one channel, system switches to single channel and system uses main stream to monitor. You can view there are two icons at the left top corner of the channel number for you reference. M stands for main stream. S stands for sub stream (extra stream). 4) If you login via the WAN mode, system does not support alarm activation to open the video function in the Alarm setup interface. Important For multiple-channel monitor mode, system adopts extra stream to monitor by default. You cannot modify manually. All channels are trying to synchronize. Please note the synchronization effect still depends on your network environments. For bandwidth consideration, system cannot support monitor and playback at the same time. System auto closes monitor or playback interface when you are searching setup in the configuration interface. It is to enhance search speed. 5.11 Setup 5.11.1 Camera 5.11.1.1 Registration 5.11.1.1.1 Registration From Main menu->Setup->Camera->Registration->Registration, you can see the following interface. See Figure 5-22. 241 Please refer to the following sheet for parameter information. Parameter Function Figure 5-22 Select IP address or the MAC address from the dropdown list and then input the corresponding information, click Search button to view the results. Click Search button, you can view the searched device information on the list. It includes device IP address, port, device name, manufacturer and type. Click to search the initialized devices. Select an uninitialized device and then click the Initialize button to set the account. to view the preview video of the remote device. Click It is to display the device has been initialized or not. That is to say, the remote device has set the initial account information or Search Uninitialized Preview State means the remote device has initialized, not. the remote device has not been intialized. Select a device in the list and then click Add button, system can connect the device automatically and add it to the Added device list. Or you can double click one item in the list to add a device. means Click or any device in the Added device list, you can change the corresponding channel setup.

, you can delete the remote connection of the Click corresponding channel. Add Modify Delete 242 Parameter Type Function There are two connection types. You can use the network to Delete Manual Add connect to the camera or use the Wi-Fi. The means current network camera connection mode is general; the means current network camera mode is hotspot. Select a device in the Added device list and then click Delete button, system can disconnect the device and remove it from the Added device list. Click it, the interface is shown as in Figure 5-23. Here you can add network camera manually. You can select a channel from the dropdown list (Here only shows disconnection channel.) Figure 5-23 Please refer to the following sheet for parameter information. Parameter Manufacturer Function Please select from the dropdown list. Note Different series products may support different manufacturers, please refer to the actual product. 243 Parameter IP address Function Input remote device IP address. Input RTSP port of the remote device. The default setup is 554. RTSP port Note Skip this item if the manufacture is private or customize. Input HTTP port of the remote device. The default setup is 80. HTTP port Note TCP port User name/password Skip this item if the manufacture is private or customize. Input TCP port of the remote device. The default setup is 37777. The user name and password to login the remote device. Input channel amount or click the Connect button to get the channel amount of the remote device. Channel No. Note We recommend click Connect button to get remote device channel amount, the manual add operation may result in failure if the input channel amount is not right. After getting the remote device channel amount, click Setup to select a channel. Note Click to select one or more remote channel numbers here. The local channel number you want to add. One channel name has corresponding one channel number. Remote channel No. Channel Decode buffer There are three item: realtime, local, fluent. There are four items: auto/TCP/UDP/MULTICAST(ONVIF device only) Note The default connection mode is TCP if the connection protocol is Service type private. There are four items including Auto, TCP, UDP and MULTICAST if the connection protocol is ONVIF. There are two items including TCP and UDP if the connection protocol is from the third-party. When the connection protocol is ONVIF, enable the encryption function and system transmits data in the encrypted mode. Encrypt Note System supports this function when HTTPS is enabled in IPC. Change IP On the searched devices list, check one or more device(s) at the same time. Click Modify IP button, you 244 can see the following interface. See Figure 5-24 Please refer to the following sheet for log parameter information. Parameter DHCP Static IP address/subnet mask/default gateway User name/password Incremental value Function Check the box here, system can auto allocate the IP address. The IP address, subnet mask, default gateway are reference only. Check the box here, you can set IP address, subnet mask, default gateway manually. You can input corresponding information here. The account you login the remote device. Please input here to password verification to change the remote device password. When you want to change several IP addresses, once you input the IP address of the first device, the IP address of increase accordingly. For example, when the incremental value is 1, if the IP address of the first device is 172.10.3.128, the IP address of the second device will auto be set as 172.10.3.129. the next device will Note For the static IP address, system will alert you if there is any IP conflict. If you are changing several IP addresses at the same time, system auto skip the conflicted IP and auto allocate again according to the incremental value you set. 245 Figure 5-24 Export IP System supports to export the registered device list and save it in the USB device. Step 1 Inset the USB device and click Export. The File Backup Encryption interface is displayed. See Figure 5-25. Figure 5-25 Step 2 File backup encryption is enabled by default. Click OK to select the save path. Step 3 Click Save. After the export is completed, system pops up a dialogue box to show that backup is completed. Note Backup encryption is enabled by default when exporting IP. The file contains information such as IP 246 address, port, remote channel number, manufacturer, username and password. If file backup encryption is enabled, the extension name of the exported file is .backup. Except the NVR device, any other software cannot open and edit the file. If the backup encryption is disabled, the extension name of the exported file is .csv. It might lead to data leakage. Import IP You can import the added device list to add the device conveniently. Click Import button, and then select the import file. Note If the imported IP is already in the added device list, system pops up dialogue box for you to confirm overwrite or not. Click OK button, the new IP setup can overwrite the old one. Click Cancel button, system adds the new IP setup. Important You can edit the exported file. Please make sure the file format is the same. Otherwise you cannot import the file again!

System does not support customized protocol import/export. The import/export function is for the devices of the same language. 5.11.1.1.2 IPC Upgrade This interface is to upgrade network camera. From Main menu->Setting->Camera->Registration->IPC upgrade, enter the following interface. See Figure 5-26. Click Browse button to select upgrade file. Or you can use filter to select several network cameras at the same time. Figure 5-26 5.11.1.2 Image 247 Note Slight difference may be found since the connected network camera may not be same model. Here you can view device property information. The setups become valid immediately after you set. See Figure 5-27. Please refer to the following sheet for detailed information. Parameter Function Figure 5-27 Channel Period Hue Brightness Contrast Please select a channel from the dropdown list. It divides one day (24 hours) to two periods. You can set different hue, brightness, and contrast for different periods. It is to adjust monitor video brightness and darkness level. The default value is 50. The bigger the value is, the large the contrast between the bright and dark section is and vice versa. It is to adjust monitor window brightness. The default value is 50. The larger the number is , the bright the video is. When you input the value here, the bright section and the dark section of the video will be adjusted accordingly. You can use this function when the whole video is too dark or too bright. Please note the video may become hazy if the value is too high. The value ranges from 0 to 100.The recommended value ranges from 40 to 60. It is to adjust monitor window contrast. The value ranges from 0 to 100. The default value is 50. The larger the number is, the higher the contrast is. You can use this function when the whole video bright is OK but the contrast is not proper. Please note the video may become hazy if the value is too low. If this value is too high, the dark section may lack brightness while the bright section may over exposure .The recommended value ranges from 40 to 60. 248 Saturation Gain White level Color mode It is to adjust monitor window saturation. The value ranges from 0 to 100. The default value is 50. The larger the number is, the strong the color is. This value has no effect on the general brightness of the whole video. The video color may become too strong if the value is too high. For the grey part of the video, the distortion may occur if the white balance is not accurate. Please note the video may not be attractive if the value is too low. The recommended value ranges from 40 to 60. The gain adjust is to set the gain value. The smaller the value is, the low the noise is. But the brightness is also too low in the dark environments. It can enhance the video brightness if the value is high. But the video noise may become too clear. It is to enhance video effect. It includes several modes such as standard, color. You can select corresponding color mode here, you can see hue, brightness, and contrast and etc will adjust accordingly. Auto Iris It is to enable/disable auto iris function. Flip Mirror BLC Mode Profile BLC WDR HLC Off It is to switch video up and bottom limit. This function is disabled by default. It is to switch video left and right limit. This function is disabled by default. The device auto exposures according to the environments situation so that the darkest area of the video is cleared For the WDR scene, this function can lower the high bright section and enhance the brightness of the low bright section. So that you can view these two sections clearly at the same time. The value ranges from 1 to 100. When you switch the camera from no-WDR mode to the WDR mode, system may lose several seconds record video. After you enabled HLC function, the device can lower the brightness of the brightest section according to the HLC control level. It can reduce the area of the halo and lower the brightness of the whole video. It is to disable the BLC function. Please note this function is disabled by default. It is to set the white balance mode. It has effect on the general hue of the video. This function is on by default. You can select the different scene mode such as auto, sunny, cloudy, home, office, night, disable and etc to adjust the video to the best quality. Auto: The auto white balance is on. System can auto compensate the color temperature to make sure the vide color is proper. Sunny: The threshold of the white balance is in the sunny mode. Night: The threshold of the white balance is in the night 249 Day/Night mode. Customized: You can set the gain of the red/blue channel. The value reneges from 0 to 100. It is to set device color and the B/W mode switch. The default setup is auto. Color: Device outputs the color video. Auto: Device auto select to output the color or the B/W video according to the device feature (The general bright of the video or there is IR light or not.) B/W: The device outputs the black and white video. Sensor: It is to set when there is peripheral connected IR light. 5.11.1.3 Encode 5.11.1.3.1 Encode The encode interface is shown as below. See Figure 5-28. Please refer to the following sheet for detailed information. Parameter Function Figure 5-28 Channel Video enable stream Code type Please select a channel from the dropdown list. Check the box here to enable extra stream video. This item is enabled by default. It includes main stream, motion stream and alarm stream. You can select different encode frame rates form different recorded events. System supports active control frame function (ACF). It allows you to record in different frame rates. For example, you can use high frame rate to record important events, record scheduled event in lower frame rate and it allows 250 Compression you to set different frame rates for motion detection record and alarm record. Video encode mode. H.264: Main Profile encode mode. H.264H: High Profile encode mode. H.264B: Baseline Profile encode mode. H.265: Main Profile encode mode. MJPEG: System needs high bit streams to guarantee video definition. Use the recommended max bit stream value to get the better video effect. Smart Codec This function is to reduce bit streams. Note Some series products support smart codec function. After changing smart code, please reboot network camera and some network camera functions (such as IVS, ROI, SVC, lobby mode and etc.) becomes null. Please think twice before the operation. Resolution Frame Rate Bit Rate Bit rate type Reference bit rate I Frame The resolution here refers to the capability of the network camera. The video frame amount displayed in each second. The higher the frame rate is, the clearer and more fluent the video is. The frame rate may vary depending on the resolution. Main stream: You can set bit rate here to change video quality. The large the bit rate is, the better the quality is. Please refer to recommend bit rate for the detailed information. Extra stream: In CBR, the bit rate here is the max value. In dynamic video, system needs to low frame rate or video quality to guarantee the value. The value is null in VBR mode. System supports two types: CBR and VBR. Main stream: It is to set frame rate to change video quality. The higher the frame rate is, the better the video quality is. The referenced bit rate is the recommended value. Sub stream: In CBR mode, the bit stream is near the specified value. In VBR mode, the video quality changes according to the bit stream value. But its max value is near the specified value. Reference bit rate: The reference bit rate depends on the resolution and frame rate you set. Recommended bit rate value according to the resolution and frame rate you have set. Here you can set the P frame amount between two I frames. The value ranges from 1 to 150. Default value is 50. Recommended value is frame rate *2. 251 Video/audio Audio format You can enable or disable the video/audio. The main stream is enabled by default. After enable the audio function, the record file is composite file consisting of the video and audio. For the sub stream 1, please enable video first and then enable audio function. Set audio encode format. Sampling rate Watermark enable Note Different series products support different audio encode mode. Please refer to the actual interface for detailed information. Audio sampling rate refers to the sampling amount within 1 second. The higher the value is, the better the audio is. The default setup is 8K. This function allows you to verify the video is tampered or not. Here you can select watermark bit stream, watermark mode and watermark character. Default character is DigitalCCTV. The max length is 85-digit. The character can only include number, character and underline. 5.11.1.3.2 Snapshot The snapshot interface is shown as in Figure 5-29. Please refer to the following sheet for detailed information. Figure 5-29 Parameter Snapshot type Image size Quality Interval Copy Function There are two modes: Regular (schedule) and Trigger. Regular snapshot is valid during the specified period you set. Trigger snapshot only is valid when motion detect alarm, tampering alarm or local activation alarm occurs. It is the same with the resolution of the main stream. It is to set the image quality. There are six levels. It is to set snapshot frequency. The value ranges from 1s to 7s. Or you can set customized value. The max setup is 3600s/picture. Click it; you can copy current channel setup to other channel(s). 5.11.1.3.3 Video Overlay The video overlay interface is shown as in Figure 5-30. 252 Please refer to the following sheet for detailed information. Figure 5-30 Parameter Cover-area Time Title Channel Title Function Check Preview or Monitor first. Click Set button, you can privacy mask the specified video in the preview or monitor video. System max supports 4 privacy mask zones. You can enable this function so that system overlays time information in video window. You can use the mouse to drag the time title position. You can view time title on the live video of the WEB or the playback video. You can enable this function so that system overlays channel information in video window. You can use the mouse to drag the channel title position. You can view channel title on the live video of the WEB or the playback video. 5.11.1.3.4 Path The storage path interface is shown as in Figure 5-31. Here you can set snap image saved path (

in the preview interface) and the record storage path in the preview interface).The default setup is C:\PictureDownload and C:\RecordDownload.

(

Please click the Save button to save current setup. 253 5.11.1.4 Channel Name Here you can set channel name. See Figure 5-32. Figure 5-31 Figure 5-32 5.11.2 Network 5.11.2.1 TCP/IP The TCP/IP interface is shown as in Figure 5-33. 254 Please refer to the following sheet for detailed information. Figure 5-33 Parameter Mode Function There are two modes: static mode and the DHCP mode. The IP/submask/gateway are null when you select the DHCP mode to auto search the IP. If you select the static mode, you need to set the IP/submask/gateway manually. If you select the DHCP mode, you can view the IP/submask/gateway from the DHCP. If you switch from the DHCP mode to the static mode, you need to reset the IP parameters. Besides, IP/submask/gateway and DHCP are read-only when the PPPoE dial is OK. It is to display host Mac address. It is to select IP version. IPV4 or IPV6. You can access the IP address of these two versions. Please use the keyboard to input the corresponding number to modify the IP address and then set the corresponding subnet mask and the default gateway. DNS IP address. Alternate DNS IP address. Mac Address IP Version IP Address Preferred DNS Alternate DNS For the IP address of IPv6 version, default gateway, preferred DNS and alternate DNS, the input value shall be 128-digit. It shall not be left in blank. LAN load System can process the downloaded data first if you enable this function. The download speed is 1.5X or 2.0X of the normal speed. 255 5.11.2.2 Port The connection interface is shown as in Figure 5-34. Please refer to the following sheet for detailed information. Figure 5-34 Parameter Max connection The max client login amount (such as WEB, platform, cellphone Function and etc). The value ranges from 1 to 128(default). TCP port UDP port HTTP port HTTPS RTSP port 5.11.2.3 Wi-Fi AP The default value is 37777. You can input the actual port number if necessary. The default value is 37778. You can input the actual port number if necessary. The default value is 80. You can input the actual port number if necessary. Select the Enable check box and configure the port according to your actual needs. The default value is 443. After HTTPS is enabled, HTTP will be switched to HTTPS by force to transmit data in a safer way. The default value is 554. This function is available only for NVR devices with built-in Wi-Fi module. See the actual situation. 5.11.2.3.1 General Setup The Wi-Fi AP interface is shown as in Figure 5-35. Select the Enable check box and you can set Wi-Fi hotspot including SSID, encryption type, password, channel and gain, so that the Wi-Fi IPC can use the hotspot to connect to the network. 256 Please refer to the following sheet for detailed information. Figure 5-35 Parameter 2.4GHz SSID Function Select the check box to enable Wi-Fi. It is to set SSID name. You can use this name to search the device. Encryption Type Select the encryption type from the dropdown list, including Password Channel Gain WPA2 PSK, WPA PSK and OPEN. It is to set SSID password. You can use this password to connect to the network. Select the channel to connect the Wi-Fi IPC. Adjust the Wi-Fi signal intensity. 5.11.2.3.2 Advanced Click Advanced button, the interface is shown as below. See Figure 5-36. Figure 5-36 Please refer to the following sheet for detailed information. Parameter IP Address Function Input the IP address, subnet mask and default gateway of the 257 Subnet Mask Default Gateway Start IP/End IP Upgrade NVR Wi-Fi AP. The IP address and default gateway shall be in the same network segment. Input start IP and end IP of DHCP server. The NVR device can allocate the IP address in the range you specified here. Click it to upgrade Wi-Fi AP module. 5.11.2.4 Wi-Fi Please note this function is for the device of Wi-Fi module. The Wi-Fi interface is shown as in Figure 5-37. Figure 5-37 Please check the box to enable Wi-Fi function and then click the Search SSID button. Now you can view all the wireless network information in the following list. Double click a name to connect to it. Click Refresh button, you can view latest connection status. 5.11.2.5 3G 5.11.2.5.1 CDMA/GPRS The CDMA/GPRS interface is shown as in Figure 5-38. 258 Please refer to the following sheet for detailed information. Figure 5-38 Parameter WLAN type APN/Dial No. Authorization Pulse interval Function Here you can select 3G network type to distinguish the 3G module from different ISP. The types include WCDMA, CDMA1x and etc. Here is the important parameter of PPP. It includes PAP,CHAP,NO_AUTH. It is to set time to end 3G connection after you close extra stream monitor. For example, if you input 60 here, system ends 3G connection after you close extra stream monitor 60 seconds. Important If the pulse interval is 0, then system does not end 3G connection after you close the extra stream monitor. Pulse interval here is for extra stream only. This item is null if you are using main stream to monitor. 5.11.2.5.2 Mobile The mobile setup interface is shown as in Figure 5-39. Here you can activate (send out on) or turn off (Send out off) the 3G connected phone or mobile phone, or the phone you set to get alarm message. Check send SMS box and then input the phone number in the receiver column. Click to add one receiver. Repeat the above steps you can add more phones. Select a phone number and then click you can delete it. Click OK button to complete the setup.

, 259 Figure 5-39 5.11.2.6 PPPoE The PPPoE interface is shown as in Figure 5-40. Input the PPPoE user name and password you get from the IPS (internet service provider) and enable PPPoE function. Please save current setup and then reboot the device to get the setup activated. Device connects to the internet via PPPoE after reboot. You can get the IP address in the WAN from the IP address column. Please note, you need to use previous IP address in the LAN to login the device. Please go to the IP address item to via the device current device information. You can access the client-end via this new address. Figure 5-40 5.11.2.7 DDNS DDNS (Dynamic Domain Name Server) is to dynamically refresh the DNS domain name and IP address if the device IP address has changed frequently. The user can use the domain to access the device. 260 Preparation Before the operation, check the DDNS type that the device supports. If the DDNS type is Quick DDNS. You do not need to register the domain name. If the DDNS is some other type, log in the website of the DDNS provider and register information like domain name. After you register the device and log in the DDNS website, you can view all connected device information of the current user. Step 1 Enter from main memu > Setup > Network > DDNS. DDNS setup interface is shown as in Figure 5-41. Figure 5-41 Step 2 Select the Enable check box. After enabling DDNS, the third-party server might collect your device information. Step 3 Select the DDNS type and configure the parameters. For details, see the below table. Parameter Server Type Address Description You can select DDNS protocol from the dropdown list and then enable DDNS function. DDNS server IP address list:

Dyndns DDNS: members.dyndns.org. NO-IP DDNS: dynupdate.no-ip.com. CN99 DDNS: members.3322.org. When the DDNS type is NO-IP DDNS, some series will display the Test button. Click Test and you can detect if the device has registered successfully. Domain Name Your self-defined domain name. User The user name you input to log in the server. 261 Parameter Password Test Description The password you input to log in the server. After the configuration, click Test and system saves the configuration and check if the domain name can be registered successfully. If succeeded, go to step4. If failed, check if the domain information is correct and clear the browser buffer. System supports this function when DDNS type is NO-IP DDNS. Update period The time interval to send update request. Unit: Minute. Step 4 Click Save to complete the setting. Step 5 Input the domain name in the Web browser and click Enter key. The setting is right if you can view the Web interface of the device. Otherwise, check the parameters. 5.11.2.8 Email The email interface is shown as in Figure 5-42. Please refer to the following sheet for detailed information. Figure 5-42 Parameter Enable SMTP Server Port Anonymity Function Please check the box here to enable email function. Input server address and then enable this function. Default value is 25. You can modify it if necessary. For the server supports the anonymity function. You can auto login anonymously. You do not need to input the user name. 262 Parameter User Name Password Sender Authentication

(Encryption mode) Subject Attachment Receiver Interval Health mail enable Update period

(interval) Email test Function password and the sender information. The user name of the sender email account. The password of sender email account. Sender email address. You can select SSL or none. Input email subject here. System can send out the email of the snapshot picture once you check the box here. Input receiver email address here. Max three addresses. It supports SSL, TLS email box. The send interval ranges from 0 to 3600 seconds. 0 means there is no interval. Please note system will not send out the email immediately when the alarm occurs. When the alarm, motion detection or the abnormity event activates the email, system sends out the email according to the interval you specified here. This function is very useful when there are too many emails activated by the abnormity events, which may result in heavy load for the email server. Please check the box here to enable this function. This function allows the system to send out the test email to check the connection is OK or not. Please check the box to enable this function and then set the corresponding interval. The value ranges from 30 minutes to 1440 minutes. System can send out the email regularly as you set here. The system will automatically sent out a email once to test the connection is OK or not .Before the email test, please save the email setup information. 5.11.2.9 UPnP It allows you to establish the mapping relationship between the LAN and the public network. Here you can also add, modify or remove UPnP item. See Figure 5-43. In the Windows OS, From Start->Control Panel->Add or remove programs. Click the Add/Remove Windows Components and then select the Network Services from the Windows Components Wizard. Click the Details button and then check the Internet Gateway Device Discovery and Control client and UPnP User Interface. Please click OK to begin installation. Enable UPnP from the Web. If your UPnP is enabled in the Windows OS, the NVR can auto detect it via the My Network Places 263 Please refer to the following sheet for detailed information. Parameter Function Figure 5-43 PAT Status Port mapping list Add Delete Internal port: The port mapped to the port. Check the corresponding box to enable PAT function. Display UPnP function status. It is corresponding to the UPnP mapping information on the router. Check the box before the service name to enable current PAT service. Otherwise, the service is null. Service name: Customized name. Protocol: Protocol type. External port: The port current device needs to map. Device has three mapping items: HTTP/TCP/UDP. Note When you set the external port (outport) of the router, the value ranges from 1024 to 5000. Do not use port 1255 or system port 2561023, in case there is conflict. Click Add button to add map relationship. Note For the data transmission protocol TCP/UDP, the external port and the internal port shall be the same to guarantee proper data transmission. Select one service and then click to delete map relationship. 5.11.2.10 SNMP The SNMP interface is shown as in Figure 5-44. The SNMP allows the communication between the network management work station software and the proxy of the managed device. It is reserved for the 3rd party to develop. 264 Figure 5-44 Please refer to the following sheet for detailed information. Parameter Version Function Select by clicking the check box in front of the corresponding version. SNMP Port Read Community Write Community System selects V3 by default. There might be some risks for V1 and V2. The listening port of the proxy program of the device. It is a UDP port not a TCP port. The value ranges from 1 to 65535. The default value is 161 It is a string. It is a command between the manage process and the proxy process. It defined the authentication, access control and the management relationship between one proxy and one group of the managers. Please make sure the device and the proxy are the same. The read community will read all the objects the SNMP supported in the specified name. The default setup is public. It is a string. It is a command between the manage process and the proxy process. It defined the authentication, access control and the management relationship between one proxy and one group of the managers. Please make sure the device and the proxy are the same. The read community will read/write/access all the objects the SNMP supported in the specified name. The default setup is 265 Parameter Trap address Trap port Read-only user Authentication mode Read-write user Password Encryption Type Function write. The destination address of the Trap information from the proxy program of the device. The destination port of the Trap information from the proxy program of the device. It is for the gateway device and the client-end PC in the LAN to exchange the information. It is a non-protocol connection port. It has no effect on the network applications. It is a UDP port not TCP port. The value ranges from 1 to 165535. The default value is 162. It only supports reading function when logging in the device with this user account. Including two modes: MD5 and SHA. The system can automatically recognize it after enabled. It supports reading and writing when logging in the device with this user account. The password for authentication and encryption. It shall be no less than 8 characters. Select the encryption mode. The default mode is CBC-DES. 5.11.2.11 Multicast The multicast interface is shown as in Figure 5-45. Multicast is a transmission mode of data packet. When there is multiple-host to receive the same data packet, multiple-cast is the best option to reduce the broad width and the CPU load. The source host can just send out one data to transit. This function also depends on the relationship of the group member and group of the outer. Figure 5-45 5.11.2.12 Auto Register The auto register interface is shown as below. See Figure 5-46. This function allows the device to auto register to the proxy you specified. In this way, you can use the client-end to access the NVR and etc via the proxy. Here the proxy has a switch function. In the network service, device supports the server address of IPv4 or domain. Please follow the steps listed below to use this function. Please set proxy server address, port, and sub-device name at the device-end. Please enable the auto register function, the device can auto register to the proxy server. 266 Figure 5-46 5.11.2.13 Alarm Centre The alarm center interface is shown as below. See Figure 5-47. This interface is reserved for you to develop. System can upload alarm signal to the alarm center when local alarm occurs. Before you use alarm center, please set server IP, port and etc. When an alarm occurs, system can send out data as the protocol defined, so the client-end can get the data. Figure 5-47 5.11.2.14 HTTPS In this interface, you can set to make sure the PC can successfully login via the HTTPS. It is to guarantee data communication security. The reliable and stable technology can secure the user information security and device safety. See Figure 5-48. Note You need to implement server certificate again if you have changed device IP. You need to download root certificate if it is your first time to use HTTPS on current PC. 267 5.11.2.14.1 Create Server Certificate If it is your first time to use this function, please follow the steps listed below. Figure 5-48 In Figure 5-48, click Create button. See Figure 5-49. Note Please make sure the IP or domain information is the same as your device IP or domain name. button, input country name, state name and etc. Click Figure 5-49 You can see the corresponding prompt. See Figure 5-50. Now the server certificate is successfully created. 5.11.2.14.2 Download root certificate Figure 5-50 In Figure 5-48, click button, system pops up a dialogue box. See Figure 5-51. 268 Click Open button, you can go to the following interface. See Figure 5-52. Figure 5-51 Click Install certificate button, you can go to certificate wizard. See Figure 5-53. Figure 5-52 269 Click Next button to continue. Now you can select a location for the certificate. See Figure 5-54. Figure 5-53 Click Next button, you can see the certificate import process is complete. See Figure 5-55. Figure 5-54 270 Figure 5-55 Click Finish button, you can see system pops up a security warning dialogue box. See Figure 5-56. Figure 5-56 Click Yes button, system pops up the following dialogue box, you can see the certificate download is complete. See Figure 5-57. Figure 5-57 5.11.2.14.3 View and set HTTPS port From Setup->Network->Port, you can see the following interface. See Figure 5-58. You can see HTTPS default value is 443. 271 Figure 5-58 5.11.2.14.4 Login Open the browser and then input https://xx.xx.xx.xx:port. xx.xx.xx.xx: is your device IP or domain mane. Port is your HTTPS port. If you are using default HTTPS value 443, you do not need to add port information here. You can input https://xx.xx.xx.xx to access. Now you can see the login interface if your setup is right. 5.11.2.15 P2P You can use your cell phone to scan the QR code and add it to the cell phone client. Via the SN from scanning the QR code, you can access the device in the WAN. Please refer to the P2P operation manual included in the resources CD. The P2P interface is shown as in Figure 5-59. Figure 5-59 272 Check the Enable box to enable P2P function and then click the Save button. When the Status shows Online, the P2P registration is successful. P2P is enabled by default. To enable you to manage the device on the mobile APP, we will collect device information like IP address, MAC address, device name and device SN. The collected information is only used for remote device access. 5.11.3 Event 5.11.3.1 Video detect 5.11.3.1.1 Motion Detect After analysis video, system can generate a video loss alarm when the detected moving signal reached the sensitivity you set here. The motion detect interface is shown as in Figure 5-60. Figure 5-60 273 Figure 5-61 Figure 5-62 Figure 5-63 274 Figure 5-64 Please refer to the following sheet for detailed information. Figure 5-65 Parameter Enable Period Anti-dither Sensitivity Region Function You need to check the box to enable motion detection function. Please select a channel from the dropdown list. Motion detection function becomes activated in the specified periods. See Figure 5-61. There are six periods in one day. Please draw a circle to enable corresponding period. Click OK button, system goes back to motion detection interface, please click save button to exit. System only memorizes one event during the anti-dither period. The value ranges from 5s to 600s. There are six levels. The sixth level has the highest sensitivity. If you select motion detection type, you can click this button to set motion detection zone. The interface is shown as in Figure 5-62. Here you can set motion detection zone. There are four zones for you to set. Please select a zone first and then left drag the mouse to select a zone. The corresponding color zone displays different detection zone. You can click Fn button to switch between the arm mode and disarm mode. In arm mode, you can click the direction buttons to move the green rectangle to set the motion detection zone. After you completed the setup, please click ENTER button to exit current setup. Do remember click save button to save current 275 Parameter Record channel Function setup. If you click ESC button to exit the region setup interface system will not save your zone setup. System auto activates motion detection channel(s) to record once an alarm occurs. Please note you need to set motion detect record period and go to Storage-> Schedule to set current channel as schedule record. Record Delay System can delay the record for specified time after alarm ended. Alarm out Latch Show message Buzzer The value ranges from 10s to 300s. Enable alarm activation function. You need to select alarm output port so that system can activate corresponding alarm device when an alarm occurs. System can delay the alarm output for specified time after an alarm ended. The value ranges from 1s to 300s. System can pop up a message to alarm you in the local host screen if you enabled this function. Check the box here to enable this function. The buzzer beeps when an alarm occurs. Alarm upload System can upload the alarm signal to the center (Including alarm Message Send Email Tour PTZ Activation Snapshot center. When 3G network connection is OK, system can send out a message when motion detect occurs. If you enabled this function, System can send out an email to alert you when an alarm occurs. You need to click setup button to select tour channel. System begins 1-wiindow or multiple-window tour display among the channel(s) you set to record when an alarm occurs. See Figure 5-64. Here you can set PTZ movement when alarm occurs. Such as go to preset X. See Figure 5-63. Click setup button to select snapshot channel. See Figure 5-65. Video Matrix This function is for motion detect only. Check the box here to enable video matrix function. Right now system supports one-channel tour function. System takes first come and first serve principle to deal with the activated tour. System will process the new tour when a new alarm occurs after previous alarm ended. Otherwise it restores the previous output status before the alarm activation. 5.11.3.1.2 Video Loss The video loss interface is shown as in Figure 5-66. Please note video loss does not support anti-dither, sensitivity, region setup. For rest setups, please refer to chapter 5.11.3.1.1 motion detect for detailed information. 276 Figure 5-66 5.11.3.1.3 Tampering The tampering interface is shown as in Figure 5-67. After analysis video, system can generate a tampering alarm when the detected moving signal reached the sensitivity you set here. For detailed setups, please refer to chapter 5.11.3.1.1 motion detect for detailed information. Figure 5-67 5.11.3.1.4 Scene Change From main window->Setup->Event->Video detect->Scene change, the video diagnosis interface is shown as in Figure 5-68. 277 Figure 5-68 For detailed setups, please refer to chapter 5.11.3.1.1 motion detect for detailed information. 5.11.3.2 IVS Plan The smart plan is for the smart network camera. If you do not set a rule here, you cannot use the intelligent functions in IVS (Chapter 5.11.3.3), Face detection (Chapter 5.11.3.4) and People counting

(Chapter 5.11.3.5) when you are connecting to a smart network camera. There are two types to realize intelligent analytics function. Note Smart network camera supports intelligent functions: Some smart camera supports the intelligent functions. For NVR, it just displays the intelligent alarm information from the smart network camera and set or playback the record file. NVR supports intelligent functions: The connected network camera does not support intelligent video analytics function. The NVR supports the analytics function. From main menu->Setup->Event->IVS plan, you can go to the IVS plan interface. See Figure 5-69. Figure 5-69 278 Select a channel from the dropdown list. Click Add button, you can see an interface shown as below. See Figure 5-70. Select a channel from the dropdown list and then set preset. Click Add button and then set the corresponding rule. Note Some smart camera does not need to add the preset. Please refer to the actual product for detailed information. Figure 5-70 Click OK button to complete the setup. Note The NVR supports general behavior analytics (IVS), human face detection, heat map, and people counting. Different network camera supports different smart plans. Please refer to the actual product for detailed information. The general behavior analytics (IVS) and human face detection function cannot be valid at the same time. For example, when add the IVS plan to the preset 1, the human face detection icon becomes grey. 5.11.3.3 IVS (Behavior Analytics) (Optional) Once the object state has reached the threshold, NVR can trigger an intelligent alarm. Note This function is for some series product only. Please refer to the actual product for detailed information. The IVS function and the human face detection function cannot be valid at the same time. The IVS function environment shall meet the following requirements:

The object total size shall not be more than 10% of the whole video. The object size on the video shall not be more than 10pixels*10 pixels. The abandoned object size shall be more than 15pixels*15 pixels (CIF resolution). The object width shall not be more than 1/3 of 279 the video height and width. The recommended height is 10% of the video. The object and the background brightness different shall be more than 10 grey levels. The object shall remain on the video for more than 2 seconds. The moving distance is larger than its own width and shall not be smaller than 15pixels (CIF resolution). The surveillance environment shall not be too complicated. The IVS function is not suitable for the environment of too many objects or the changing light. The surveillance environment shall not contain glasses, reflection light from the ground, and water. Free of tree branches, shadow, mosquito and bugs. Do not use the IVS function in the backlight environment, avoid direct sunlight. 5.11.3.3.1 Behavior Analytics From main menu->Setup->Event->Behavior analytics->Behavior analytics, you can go to the Behavior analytics interface. See Figure 5-71. Please select a channel from the dropdown list Figure 5-71 Click to add a rule. The default setup is tripwire, you can double click the rule type name to modify. See Figure 5-72. Figure 5-72 280 Then you can set corresponding parameters. Click OK button to complete the setup. 5.11.3.3.2 Tripwire From main menu->Setup->Event-> Behavior analytics->Behavior analytics, click following interface. See Figure 5-73. System generates an alarm once there is any object crossing the tripwire in the specified direction. you can see the Figure 5-73 Check the Tripwire box to enable tripwire function. Select SN (Line1/2/3/4) and direction, and then input customized rule name. Direction: There are three options: A->B, B->A, both. System can generate an alarm once there is any object crossing in the specified direction. Now you can draw a rule. Click Draw rule button and then left click mouse to draw a tripwire. The tripwire can be a direct line, curve or polygon. Right click mouse to complete. See Figure 5-74. 281 Figure 5-74 Click to draw filter object. See Figure 5-75. Figure 5-75 Select the blue line and then use mouse to adjust zone size. Note Each rule can set two sizes (min size/max size). Once the object is smaller than the min size or larger than the max size, there is no alarm. Please make sure the max size is larger than the min size. Click Ok to complete the rule setup. 282 For detailed setups, please refer to chapter 5.11.3.1.1 motion detect for detailed information. 5.11.3.3.3 Intrusion (Cross warning zone) From main menu->Setup->Event-> Behavior analytics->Behavior analytics, click type as intrusion, you can see the following interface. See Figure 4-126. Note:

System supports customized area shape and amount. Support enter/leave/both detection. Can detect the moving object operation in the specified zone, customized trigger amount and staying

, and then select rule time. Support objects filter function. Figure 5-76 Check the Intrusion box to enable intrusion function. Select SN (Area1/2/3/4) and direction, and then input customized rule name. Action: System supports two types: appear/cross. Direction: There are three options: A->B, B->A, both. System can generate an alarm once there is any object enter/exit (Or both) the zone. Now you can draw a rule. Left click mouse to draw a line first and then right click mouse to draw another line until you draw a rectangle, you can right click mouse to exit. Click Ok to complete the rule setup. Click to draw the zone. See Figure 5-77. 283 Figure 5-77 For detailed setups, please refer to chapter 5.11.3.1.1 motion detect for detailed information. 5.11.3.3.4 Abandoned Object Detect From main menu->Setup->Event-> Behavior analytics->Behavior analytics, click type as abandoned object detection, you can see the following interface. See Figure 5-78. System supports customized area shape and amount. Support duration setup. Support objects filter function.

, and then select rule 284 Figure 5-78 Check the Object box to enable object detect function. Period: System can generate an alarm once the object is in the zone for the specified period. Click to draw the rule. See Figure 5-79. Figure 5-79 Now you can draw a rule. Left click mouse to draw a line, until you draw a rectangle, you can right click mouse. Click Ok to complete the rule setup. 285

For detailed setups, please refer to chapter 5.11.3.1.1 motion detect for detailed information. 5.11.3.3.5 Missing Object Detect From main menu->Setup->Event-> Behavior analytics->Behavior analytics, click type as missing object detection, you can see the following interface. See !. System supports customized area shape and amount. Support period setup. Support objects filter function.

, and then select rule Click to draw the rule. See Figure 5-81. Figure 5-80 Figure 5-81 286 Click Ok to complete the rule setup. For detailed setups, please refer to chapter 5.11.3.1.1 motion detect for detailed information. 5.11.3.3.6 Loitering From main menu->Setup->Event-> Behavior analytics->Behavior analytics, click type as loitering detection, you can see the following interface. See !. Note System supports customized area shape and amount. Support duration setup. Support objects filter function.

, and then select rule Duration: System can generate an alarm once the object is in the zone for the specified period. Figure 5-82 Click to draw the rule. Click OK to complete the rule setup. For detailed setups, please refer to chapter 5.11.3.1.1 motion detect for detailed information. 5.11.3.3.7 Crowd gathering detection From main menu->Setup->Event-> Behavior analytics->Behavior analytics, click type as crowd gathering estimation, you can see the following interface. See !. Customized zone and amount setup. Duration setup. Sensitivity setup. Min gathering zone setup.

, and then select rule 287 Duration: System can generate an alarm once the object is in the zone for the specified period. Sensitivity: It is to set alarm sensitivity. The value ranges from 1 to 10.The default setup is 5. Figure 5-83 to draw the rule. Click Click OK to complete the rule setup. For detailed setups, please refer to chapter 5.11.3.1.1 motion detect for detailed information. 5.11.3.3.8 Fast moving From main menu->Setup->Event-> Behavior analytics->Behavior analytics, click type as fast moving, you can see the following interface. See !. Sensitivity: It is to set alarm sensitivity. The value ranges from 1 to 10.The default setup is 5.

, and then select rule 288 Figure 5-84 Click to draw the rule. Click OK to complete the rule setup. For detailed setups, please refer to chapter 5.11.3.1.1 motion detect for detailed information. 5.11.3.3.9 Global Config From main menu->Setup->Event->Behavior analytics->Global, you can go to the global configuration interface. See the below figure. Channel: Please select a channel from the dropdown list. Preset: Select a preset you want to set the rule. Please note, you need to add a preset first, otherwise, you cannot see the preset dropdown list. If there is no preset, you can draw a rule in current channel. Calibration zone:

Click Add area

, you can draw a calibration zone at the left pane of the interface. Select a zone and then click Delete zone button; you can remove the selected zone. Select gauge type (vertical/level), you can set the corresponding length. You can draw three tilt gauges and one horizontal gauge at the left pane of the interface. Select Width/Height and then click Verify, you can draw a line in the calibration zone, and then you can see its actual length. Update preset: Click it to get the latest preset setup. 289 Figure 5-85 5.11.3.4 Face Detect (Optional) When camera detects human face, system can generate an alarm. From main menu->Setup->Event->Face detect, the interface is shown as in Figure 5-86. Enable face boost: Check the box here, system can enhance the human face display pane. Sensitivity: System supports 6 levels. The sixth level has the highest sensitivity. Figure 5-86 For detailed setups, please refer to chapter 5.11.3.1.1. 5.11.3.5 People Counting System can calculate the entry/exit people amount in the specified zone. It can generate an alarm when the amount has exceeded the threshold. 290 From main menu->Setup->Event->People counting, you can see an interface shown as the below figure. Channel: Please select a channel from the dropdown list. Check the box to enable people counting function. OSD overlay: Check the box here; you can view the people amount on the surveillance video. Direction: It is to set people flow direction. It includes entry/exit. Entry No.: It is to set people entry amount. System can generate an alarm once the amount has exceeded the threshold. Exit No.: It is to set people entry amount. System can generate an alarm once the amount has exceeded the threshold. Stranded No.: It is to set people staying amount in the zone. System can generate an alarm once the amount has exceeded the threshold. For detailed setups, please refer to chapter 5.11.3.1.1 motion detect for detailed information. Figure 5-87 5.11.3.6 Heat Map It is to detect the object activity level in the scene during the specified period. From main menu->Setup->Event->Heat Map, you can see an interface shown as in Figure 5-88. For detailed setups, please refer to chapter 5.11.3.1.1 motion detect for detailed information. 291 Figure 5-88 5.11.3.7 Plate Recognition License plate recognition adopts video image recognition technology to extract the license plate number in video image and match it with the pre-set license plate number. After successful matching, the system performs alarm linkage action 5.11.3.7.1 Configuring Plate Recognition You can set the different plate recognition detection rules and alarm linkage actions under different confitions (B/W list and regular) Step 1 Select Setup > Event > ANPR. The ANPR interface is displayed. See Figure 5-89. Step 2 Select the Enable check box and choose the channel. Step 3 Enter the Name and click Draw Rule to draw the rule region on the monitor screen. Click Clear to cancel the drawing. Step 4 Click the Regular, Whitelist or Blacklist tab according to actual needs. System displays the Figure 5-89 Regular tab by default. 292 You need to configure the B/W list before using the B/W alarm linkage. For details, see 4.7.7.2 B/W List. Regular: System activates alarm when any car plate is detected. Blacklist: System activates alarm only when plates in the black list is detected. Whitelist: System activates alarm only when plates in the white list is detected. Step 5 Configure the parameters. Step 6 Click OK to save the configuration. 5.11.3.7.2 B/W List It is to set the blacklist and the whitelist. It includes adding, deleting, importing and exporting blacklist and whitelist. After setting the blacklist and whitelist, in the plate snapshot list on the preview interface, the blacklist plate number is red, the whitelist plate number is green and the regular plate number is white. Adding B/W List Step 1 Select Setup > Event > ANPR > B/W List. The B/W list is diaplayed. See Figure 5-90. Figure 5-90 Step 2 Enter the plate number and selecy whitelist or blacklist in the drop-down list. Step 3 Click Add to complete the registration. Deleting B/W List In the Type list, select whitelist, blacklist or all and click Search, system displays the detailed information. See Figure 5-91. Select the check box in front of the plate number and click Delete to delete the plate info in the list. You can also click corresponding to the plate number to delete it. Click Clear to delete all the information in the B/W list. 293 Figure 5-91 Importing /Exporting B/W List System supports to import B/W list from the peripheral USB device and export B/W list to the USB device. System supports to import .csv files and .xlsx files, and the exported files are in the format of .csv or .backup. Export B/W list: Click Export and the File Backup Encryption interface is displayed. See Figure 5-92. Importing B/W list: Click Import, select the file, and then click Open to import the file. Enter the password and click OK. Select the save path and click Save. Figure 5-92 File backup encryption is enabled by default. When file backup encryption is enabled, the extension name of the file is .backup. When file backup encryption is disabled, the extension name of the file is .csv. It might lead to data leakage. 5.11.3.8 Audio Detect (Optional) System can generate an alarm once it detect the audio input is abnormal or audio volume changes. From main menu->Setup->Event->Audio detect, you can see an interface shown as in Figure 5-93. Input abnormal: Check the box here, system can generate an alarm once the audio input is abnormal. 294 Intensity change: Check the box here, system can generate an alarm once the audio volume becomes strong. Sensitivity: It refers to the audio recognition sensitivity. The higher the value is, the higher the sensitivity is. Threshold: It is to set intensity change threshold. The smaller the value is, the higher the sensitivity is. For detailed setups, please refer to chapter 5.11.3.1.1 motion detect for detailed information. Figure 5-93 5.11.3.9 Alarm Before operation, please make sure you have properly connected alarm devices such as buzzer. The input mode includes local alarm and network alarm. 5.11.3.9.1 Local Alarm The local alarm interface is shown as in Figure 5-94. It refers to alarm from the local device. Figure 5-94 295 Figure 5-95 Figure 5-96 Please refer to the following sheet for detailed information. Parameter Enable Function You need to check the box to enable this function. 296 Parameter Period Anti-dither Sensor type Record channel Record Delay Alarm out Latch Show message Buzzer Alarm upload Send Email Tour PTZ Activation Snapshot Function Please select a channel from the dropdown list. This function becomes activated in the specified periods. There are six periods in one day. Please draw a circle to enable corresponding period. Select date. If you do not select, current setup applies to today only. You can select all week column to apply to the whole week. Click OK button, system goes back to local alarm interface, please click save button to exit. System only memorizes one event during the anti-dither period. The value ranges from 5s to 600s. There are two options: NO/NC. System auto activates motion detection channel(s) to record once an alarm occurs. Please note you need to set alarm record period and go to Storage-> Schedule to set current channel as schedule record. System can delay the record for specified time after alarm ended. The value ranges from 10s to 300s. Enable alarm activation function. You need to select alarm output port so that system can activate corresponding alarm device when an alarm occurs. System can delay the alarm output for specified time after an alarm ended. The value ranges from 1s to 300s. System can pop up a message to alarm you in the local host screen if you enabled this function. Check the box here to enable this function. The buzzer beeps when an alarm occurs. System can upload the alarm signal to the center

(Including alarm center). If you enabled this function, System can send out an email to alert you when an alarm occurs. You need to click setup button to select tour channel. System begins 1-wiindow or multiple-window tour display among the channel(s) you set to record when an alarm occurs. See Figure 5-64. Here you can set PTZ movement when alarm occurs. Such as go to preset X. See Figure 5-96. Click setup button to select snapshot channel. See Figure 5-65. 5.11.3.9.2 Net Alarm The network alarm interface is shown as in Figure 5-97. Network alarm refers to the alarm signal from the network. System does not anti-dither and sensor type setup. For setup information, please refer to chapter 5.11.3.9.1. 297 Figure 5-97 5.11.3.9.3 IPC external alarm The IPC external alarm interface is shown as in Figure 5-98. Network alarm refers to the alarm signal from the network. System does not anti-dither and sensor type setup. For setup information, please refer to chapter 5.11.3.9.1. Figure 5-98 5.11.3.9.4 IPC Offline Alarm 298 The IPC offline alarm interface is shown as in Figure 5-99. System can generate an alarm once the network camera is offline. For setup information, please refer to chapter 5.11.3.9.1. Figure 5-99 5.11.3.10 Abnormality From main menu->Setup->Event->Abnormality, it includes four types: HDD/Network/User/Device. See Figure 5-100 through Figure 5-103. Figure 5-100 299 Figure 5-101 Figure 5-102 300 Please refer to the following sheet for detailed information. Figure 5-103 Parameter Function Event Type The abnormal events include:

HDD: No disk, disk error, disk no space;

Network: Net disconnection, IP conflict, MAC conflict. User: Illegal login. Device: Temperature is too high, fan speed is abnormal. Please note this function is for some series product only. You can set one or more items here. Less than: You can set the minimum percentage value here. The device can generate an alarm when capacity is not sufficient. This item is for disk no space type only. Enable Check the box here to enable selected function. Alarm Out Please select corresponding alarm output channel when an alarm Latch Attempt(s) Lock time Show message occurs. You need to check the box to enable this function. The alarm output can delay for the specified time after an alarm stops. The value ranges from 0s to 300s. The default setup is 10 seconds. The o second means there is no delaying time. It is to set login attempt times. Once the login attempt exceeds the threshold you set here, current account will be locked. This function is for illegal login only. It is to set account lock time once its login attempt has exceeded the threshold you set. This function is for illegal login only. System can pop up a message to alarm you in the local host screen if you enabled this function. 301 Parameter Function Alarm upload Send Email Buzzer System can upload the alarm signal to the center (Including alarm center. If you enabled this function, System can send out an email to alert you when an alarm occurs. Check the box here to enable this function. The buzzer beeps when an alarm occurs. Check the box here, system can record the network event alarm log. Log 5.11.3.11 Alarm Out The alarm output interface is shown as below. See Figure 5-104 Here you can set alarm output mode: auto/manual/stop. Figure 5-104 5.11.4 Storage 5.11.4.1 Basic It is to manage HDD storage space. Step 4 From main menu->Setup->Storage->Basic. Enter Basic interface. See Figure 5-44. Step 5 Set parameters. Figure 5-105 302 Parameter Function HDD full It is to select working mode when hard disk is full. There are two options stop recording or rewrite. Stop: If current HDD is full while there is no idle HDD, then system stops recording, Overwrite: If the current HDD is full while there is no idle HDD, then system overwrites the previous files. It is to specify record duration. The max value is 120 minutes. Never: Do not auto delete old files. Customized: input customized period here, system can auto delete corresponding old files Pack duration Auto delete old files 5.11.4.2 Schedule In this interfaces, you can add or remove the schedule record setup. See Figure 5-106. There are four record modes: general (auto), motion detect, alarm and MD&alarm. There are six periods in one day. You can view the current time period setup from the color bar. Green color stands for the general record/snapshot. Yellow color stands for the motion detect record/snapshot.. Red color stands for the alarm record/snapshot. Blue color stands for MD&alarm record/snapshot. Figure 5-106 303 Figure 5-107 Figure 5-108 Please refer to the following sheet for detailed information. Parameter Function Channel Please select a channel from the dropdown list. Pre-record Please input pre-record time here. The value ranges from 0 to 30. Redundancy Check the box here to enable redundancy function. Please note this function is null if there is only one HDD. Check the box here to enable snapshot function. Check the box here to enable holiday function. Click the Setup button, you can set record period. See Figure 5-107. There are six periods in one day. If you do not check the date at the 304 Snapshot Holiday Setup Parameter Function Copy bottom of the interface, current setup is for today only. Please click Save button and then exit. Copy function allows you to copy one channel setup to another. After setting in channel, click Copy button, you can go to interface Figure 5-108. You can see current channel name is grey such as channel 1. Now you can select the channel you want to paste such as channel 5/6/7. If you want to save current setup of channel 1 to all channels, you can click the first box ALL. Click the OK button to save current copy setup. Click the OK button in the Encode interface, the copy function succeeded. 5.11.4.3 HDD Manager 5.11.4.3.1 Local Storage The local interface is shown as in Figure 5-109. Here you can see HDD information. You can also operate the read-only, read-write, redundancy (if there are more than on HDD) and format operation. 5.11.4.3.2 HDD The HDD interface is to set HDD group. See Figure 5-110. Figure 5-109 Figure 5-110 5.11.4.3.3 FTP Configure FTP information on the FTP interface. See Figure 5-111. Set the FTP as your remote storage location. System can save record file or snapshot picture to the FTP once the network is offline or malfunction. 305 Figure 5-111 FTP transmits data with clear text mode and SFTP transmits data with encrypted mode. SFTP is recommended. Host IP: The host IP you have installed the FTP server. Port: The default SFTP port number is 22 and the default FTP port number is 21. User name/Password: The account for you to access the FTP server. Remote directory: The folder you created under the root path of the FTP according to the corresponding rule. If there is no remote directory, system can auto create different directories according to the IP, time and channel. If there is remote directory, system can create corresponding folder under the FTP root path and then create different folders according to IP address, time and channel. File length: File length is upload file length. When setup is larger than the actual file length, system will upload the whole file. When setup here is smaller than the actual file length, system only uploads the set length and auto ignore the left section. When interval value is 0, system uploads all corresponding files. Image upload interval: It is the image upload interval. If the image upload interval is larger than the image snapshot frequency, system just uploads the lasted image. If the image interval is 5 seconds and the snapshot frequency is 2 seconds, system will send out the latest image at the buffer at 5 seconds. If the image upload interval is smaller than the snapshot frequency, system will upload at the snapshot frequency. For example, if the image interval is 5 seconds and the snapshot frequency is 10 seconds, system will send out the image at 10 seconds. From main menu->Setting->Camera->Encode->Snapshot to set snapshot frequency. Channel: Select a channel from the dropdown list and then set week, period and record type. 306 Week day/Period: Please select from the dropdown list and for each day, you can set two periods. Type: Please select uploaded record type (Alarm/intelligent/motion detect/regular). Please check the box to select upload type. 5.11.4.4 Record Control The interface is shown as in Figure 5-112. Please refer to the following sheet for detailed information. Figure 5-112 Parameter Function Channel Here you can view channel number. The number displayed here is the max channel amount of your device. There are three statuses: schedule, manual and stop. System enables auto record function as you set in record schedule setup (general, motion detect and alarm). It has the highest priority. Enable corresponding channel to record no matter what period applied in the record setup. Status Schedule Manual 307 Stop Start all/

stop all Stop current channel record no matter what period applied in the record setup. Check the corresponding All button, you can enable or disable all channels record. 5.11.4.5 RAID Manager Important Please make sure your purchased product support the RAID function, otherwise you cannot see the following interface. RAID (redundant array of independent disks) is a data storage virtualization technology that combines multiple physical HDD components into a single logical unit for the purposes of data redundancy, performance improvement, or both. Note RAID function is for some series product only. Slight difference may be found on the user interface. Right now, NVR supports RAID0, RAID1, RAID5, RAID6, and RAID 10. Local hotspare supports RAID1, RAID5, RAID6, and RAID10. Refer to the following table for detailed information. RAID Type RAID0 RAID1 RAID5 RAID6 RAID10 HDD Amount At least 2 HDDs. Only 2 HDDs. At least 3 HDDs. Usually recommend the RAID5 consists of 4 to 6 HDDs. At least 4 HDDs. At least 4 HDDs. 5.11.4.5.1 RAID Config It is for you to manage RAID HDD. It can display RAID name, type, free space, total space, status and etc. Here you can add/delete RAID HDD. Click Add button to select RAID type and then select HDDs, click OK button to add. See Figure 5-113. One click to create RAID Click it to automatically create RAID5. For create RAID function, you can select the physical HDD that does not included in the RAID group or the created disk array to create a RAID5. You can refer to the following situations:

There is no RAID, no hotspare disk: System directly creates the RAID5 and creates one hotspare disk at the same time. There is no RAID, but there is a hotspare disk: System creates the RAID5 only. It uses previous hotspare disk. There is RAID: System cancel the previous RAID setup and then create the new RAID5. System creates the hotspare disk if there is no one. System uses previous hotspare disk if there is hotspare disk available. The background will format the virtual disk. Create manually Step 4 Select RAID type first and then follow the prompts to set HDD amount. Step 5 Click Create Manually button, system pops up dialogue box to warning you it is going to clear all data. Step 6 Click OK button to complete the operation. 308 Note Click to delete RAID. Figure 5-113 5.11.4.5.2 Hotspare disks In Figure 5-113, click hotspare button, you can add the hot spare HDD. See Figure 5-114. The type includes two options:

Global: It is global hotspare disk. When any RAID becomes degrading, it can replace and build the RAID. Local: It is local hotspare disk. When the specified RAID becomes degrading, it can replace and build the RAID. Select a hot spare device and then click Delete button. Click Apply button to delete. Figure 5-114 309 5.11.4.6 Storage 5.11.4.6.1 Main Stream The main stream interface is shown as in Figure 5-115. Here you can set corresponding HDD group to save main stream. Figure 5-115 5.11.4.6.2 Sub Stream The sub stream interface is shown as in Figure 5-116. Here you can set corresponding HDD group to save sub stream. Figure 5-116 5.11.4.6.3 Snapshot The snapshot interface is shown as in Figure 5-117. Here you can set corresponding HDD group to save snapshot picture. 310 Figure 5-117 5.11.5 Setting 5.11.5.1 General The general interface includes general, date/time and holiday setup. 5.11.5.1.1 General The general interface is shown as in Figure 5-118. Figure 5-118 Please refer to the following sheet for detailed information. Parameter Function Device ID Device No. Language You can select the language from the dropdown list. It is to set device name. It is device channel number. Please note the device needs to reboot to get the modification activated. 311 Video Standard Auto logout Here is for you to set auto logout interval once login user remains This is to display video standard such as PAL. IPC Time Sync Navigation bar inactive for a specified time. Value ranges from 0 to 60 minutes. You can input an interval here to synchronize the NVR time and IPC time. Check the box here, system displays the navigation bar on the interface. 5.11.5.1.2 Date and time The date and time interface is shown as in Figure 5-119 Figure 5-119 Please refer to the following sheet for detailed information. Parameter Function Date format Here you can select date format from the dropdown list. There are two options: 24-H and 12-H. Time Format Time zone The time zone of the device. It is to set system time. It becomes valid after you set. You can click this button to save the system time as your PC current time. System time Sync PC 312 DST Here you can set day night save time begin time and end time. You can set according to the date format or according to the week format. You can check the box to enable NTP function. NTP NTP server You can set the time server address. Port Interval It is to set the time server port. It is to set the sync periods between the device and the time server. 5.11.5.1.3 Holiday Setup Holiday setup interface is shown as in Figure 5-120. Here you can click Add holidays box to add a new holiday and then click Save button to save. Figure 5-120 5.11.5.2 Display Display interface includes GUI, TV adjust, Tour and Customized split. 5.11.5.2.1 Display Here you can set background color and transparency level. See Figure 5-121. 313 Please refer to the following sheet for detailed information. Figure 5-121 Parameter Resolution Function There are four options: 19201080, 12801024(default), 1280720, 1024768. Please note the system needs to reboot to activate current setup. Color mode Please select from the dropdown list. Transparency Here is for you to adjust transparency. The value ranges from 128 to 255. Check the box here, you can view system time and channel number on the monitor video. Check the box; you can optimize the margin of the preview video. Once you check the box here, system will go to the startup wizard directly when the system restarts the next time. Otherwise, it will go to the login interface. Check the box here, system displays the navigation bar on the interface. Navigation bar Original scale Click the Set button to select a channel, it can restore original scale. Auto logout Here is for you to set auto logout interval once login user remains inactive for a specified time. Value ranges from 0 to 60 minutes. 0 means there is no standby time. After the auto logout, the user Time title/channel title Image enhance Startup wizard 314 needs to input user name and password to login again. Check the box to enable IVS function, system can display IVS rule on the preview interface. Display intelligent rule(s) 5.11.5.2.2 Tour The tour interface is shown as in Figure 5-122. Here you can set tour interval, split mode, motion detect tour and alarm tour mode. Figure 5-122 Please refer to the following sheet for detailed information. Parameter Function Enable tour Check the box here to enable tour function. Interval Split Motion tour/Alarm tour Here is for you to adjust transparency. The value ranges from 5 to 120s. The default setup is 5s. Here you can set window mode and channel group. System can support 1/4/8/9/16/25/36-window according to device channel amount. Here you can set motion detect tour/alarm tour window mode. System supports 1/8-window now. 5.11.5.2.3 Custom Split From main menu->Setup->System->Display->Custom split, the interface is shown as in Figure 5-123. Here you can set customized split mode. Note This function is for some series products. Please refer to the actual product for detailed information. 315 Device max supports 5 customized videos. Figure 5-123 and then click Click In regular mode, drag the mouse in the preview frame, you can merge several small windows to one window so that you can get you desired split mode. After the setup, the selected window has the red frame. to select basic mode Select the merging window, the frame is red; you can click mode. Click OK to exit. 5.11.5.3 RS232 The RS232 interface is shown as in Figure 5-124. to cancel the merge to restore regular Please refer to the following sheet for detailed information. Figure 5-124 316 Parameter Function Protocol Baud Rate Select the baud rate. Select the corresponding dome protocol. Default setup is console. Data Bit Stop bit Parity Default setup is 115200. The value ranges from 5 to 8. Default setup is 8. There are two options: 1/2. Default setup is 1. There are five options: none/odd/even/space/mark. Default setup is none. 5.11.5.4 PTZ The PTZ interface is shown as in Figure 5-125 (Local) and Figure 5-126 (Remote). Before setup, please check the following connections are right:

PTZ and decoder connection is right. Decoder address setup is right. Decoder A (B) line connects with NVR A (B) line. Click Save button after you complete setup, you can go back to the monitor interface to control speed dome. Figure 5-125 317 Figure 5-126 Please refer to the following sheet for detailed information. Parameter Function Channel Select speed dome connected channel. PTZ Type There are two options: local/remote. Please select remote type if you are connecting to the network PTZ. Please select local type if you are using RS485 to the PTZ camera. Select the corresponding dome protocol such as PELCOD. Set corresponding dome address. Default value is 1. Please note your setup here shall comply with your dome address; otherwise you cannot control the speed dome. Select the dome baud rate. Default setup is 9600. The value ranges from 5 to 8. Default setup is 8. Please set according to the speed dome dial switch setup. The value ranges from 1 to 2. Default setup is 1. Please set according to the speed dome dial switch setup. The options include non/odd/even/space/null. Default setup is none. Please set according to the speed dome dial switch setup. Protocol Address Baud Rate Data Bit Stop bit Parity 5.11.5.5 POS Connect the NVR to the POS, it can receive the POS information and overlay on the corresponding record. Note POS info overlay and playback function is for 1-window only. From main menu->Setting->System->POS, you can go to the following interface. See Figure 5-127. Click Add, you can see the following dialogue box. See Figure 5-128. Figure 5-127 318 Check the box to enable POS function, Click Set button; you can see the following interface. See Figure 5-129. Figure 5-128 Figure 5-129 Set source IP and destination IP, and then click OK. System goes back to Figure 5-128. Source IP: POS device IP address. Destination IP: NVR IP address. In Figure 5-128, click Channel Set button, select the channel you want to overlay POS information. Click OK button to complete the setup. Tips

: Click it to delete POS setup.

: Click it to change setup information. 5.11.5.6 Voice The audio function is to manage audio files and set schedule play function. It is to realize audio broadcast activation function. 319 5.11.5.6.1 File List From main menu->Setup->System->Voice->File list, here you can add audio file, or delete audio file. See Figure 5-130. Figure 5-130 Click Add button, you can add audio file and import the audio file via the local computer. See Figure 5-131. Figure 5-131 5.11.5.6.2 Schedule It is to set schedule broadcast function. You can play the different audio files in the specified periods. From main menu->Setup->System->Voice->.Schedule, you can see the following interface. See Figure 5-132. 320 Figure 5-132 Please refer to the following sheet for detailed information. Parameter Function Period There are six periods. Check the box to enable current setup. It is to set audio file repeat times in the specified period. It is the audio file repeated interval in the specified period. There are two options: MIC (default)/audio. When reuse the MIC port and bidirectional talk port, the bidirectional port has the higher priority. Please note some series product does not support audio function. Repeat Interval Output port Note The audio file end time depends on the audio file size and the interval setup. Priority: Bidirectional talk>Event trigger alarm>Trial listening>Audio schedule broadcast. 5.11.5.7 Account Note For the user name, the string max length is 31-byte, and for the user group, the string max length is 15-byte. The user name can only contain English letters, numbers and _@.. The default user amount is 64 and the default group amount is 20. System account adopts two-level management: group and user. The user authorities shall be smaller than group authorities (The admin user authorities are set by default). For group or user management, there are two levels: admin and user. The user name shall be unique and one user shall only belong to one group. 5.11.5.7.1 User name From main menu->Setup->System->Account->Account, enter account interface. See Figure 5-133. Figure 5-133 321 Add user It is to add a name to group and set the user rights. Step 1 Click Add user button. Enter add user interface. See Figure 5-134. Step 2 Here you can input the user name and password and then select one group for current user. Figure 5-134 Step 3 Click the Set button after the period. It is to set valid period to use current account. See Figure 5-135. 322 Figure 5-135 Click Setting to set the periods. Or you can draw on the interface directly. There are six periods in one day. Or you can input start time and end time directly. Check the box before the date, the settings are for the selected date(s). Check the box before the period1-6, it is to enable the period function. Step 4 Click Save to complete the setup. Note Please note the user rights shall not exceed the group right setup. For convenient setup, please make sure the general user has the lower rights setup than the admin. Modify user It is to modify the user property, belonging group, password and rights. See Figure 5-136. 323 Figure 5-136 Note For admin, you can change the email information. See Figure 5-137. 324 Modify password It is to modify the user password. Step 1 In Modify user interface, click Modify password box. See Figure 5-138. Figure 5-137 325 Input old password, and then input new password and confirm. Step 2 Step 3 Click Save button. Figure 5-138 Note The password ranges from 8 to 32 digitals. It can contain letters, numbers and special characters (excluding ',",;,:,&) . The password shall contain at least two categories. Usually we recommend the strong password. WARNING STRONG PASSWORD RECOMMENDED-For your device own safety, please create a strong password of your own choosing. We also recommend you change your password periodically especially in the high security system. 5.11.5.7.2 Group It is to add/remove group, modify group password and etc. From main menu->Setup->System->Account->Account. Click Group tab, the interface is shown as in Figure 5-139. 326 Figure 5-139 Add group It is to add group and set its corresponding rights. Step 1 Click Add group button. Enter add group interface. See Figure 5-140. Figure 5-140 Step 2 Input the group name and then check the box to select the corresponding rights. It includes:

system, playback, and monitor. Step 3 Click Save button. Modify group Step 1 Select a group and then click

. See Figure 5-141. 327 Figure 5-141 Step 2 Change corresponding information and then click Save button. 5.11.5.7.3 ONVIF User When the camera from the third party is connected with the NVR via the ONVIF user, please use the verified ONVIF account to connect to the NVR. Step 1 From main menu->Setting->System->Account->ONVIF User. Enter ONVIF user interface. See the following figure. Step 2 Click Add user button. Enter add user interface. See Figure 5-143. Figure 5-142 328 Step 3 Set user name, password and then select group from the dropdown list. Step 4 Click Save to complete setup. Figure 5-143 Note Click to change user information, click to delete current user. 5.11.5.8 Security To enhance device network security and protect device data, please set the access right of the IP host (IP host here refers to the IP PC or the server). After you enabled trusted sites function, only the IP listed below can access current NVR. If you enable blocked sites function, the following listed IP addresses cannot access current NVR. Step 1 From main menu->Setting->System->Security. Enter security interface. See Figure 5-144. Step 2 Check the Enable box. Select trusted sites/block sites. Enable trusted site function and then add the whitelist. Enable blocked site function and then add the blacklist. Step 3 Set parameters. Start address/end address: Select one type from the dropdown list, you can input IP address in the start address and end address. Now you can click Add IP address or Add IP section to add. System supports max 64 IP addresses. a) For the newly added IP address, it is in enable status by default. Remove the before the item, and then current item is not in the list. b) System max supports 64 items. c) Address column supports IPv4 or IPv6 format. If it is IPv6 address, system can optimize it. For example, system can optimize aa:0000: 00: 00aa: 00aa: 00aa: 00aa: 00aa as aa:: aa: aa: aa: aa:

aa: aa. d) System automatically removes space if there is any space before or after the newly added IP address. e) System only checks start address if you add IP address. System check start address and end address if you add IP section and the end address shall be larger than the start address. 329 f) System may check newly added IP address exists or not. System does not add if input IP address does not exist. Delete: Click it to remove specified item. Edit: Click it to edit start address and end address. See Figure 5-145. System can check the IP address validity after the edit operation and implement IPv6 optimization. Default: Click it to restore default setup. In this case, the trusted sites and blocked sites are both null. Step 4 Click Save to complete setup. If you enabled trusted sites, only the IP in the trusted sites list can access the device. If you enabled blocked sites, the IP in the blocked sites cannot access the device. Figure 5-144 Figure 5-145 5.11.5.9 Auto maintain The auto maintain interface is shown as in Figure 5-146. Here you can select auto reboot and auto delete old files interval from the dropdown list. If you want to use the auto delete old files function, you need to set the file period. Click Manual reboot button, you can restart device manually. 330 Figure 5-146 Import/Export 5.11.5.10 The interface is shown as in Figure 5-147. This interface is for you to export or import the configuration files. Figure 5-147 Please refer to the following sheet for detailed information. Parameter Function Browse Click to select import file. Import Export It is to import the local setup files to the system. It is to export the corresponding WEB setup to your local PC. 5.11.5.11 Default The default setup interface is shown as in Figure 5-148. Here you can select Network/Event/Storage/Setting/Camera. Or you can check the All box to select all items. 331 Figure 5-148 5.11.5.12 Upgrade CAUTION During the upgrade process, do not unplug the power cable, network cable, or shutdown the device. Improper upgrade program may result in device malfunction!

There are two upgrade modes: file upgrade and online upgrade. 5.11.5.12.1 File Upgrade The upgrade interface is shown as in Figure 5-149. Please select the upgrade file and then click the update button to begin update. Please note the file name shall be as *.bin. 5.11.5.12.2 Cloud Upgrade When the NVR is online, you can use the cloud upgrade to update the firmware. Figure 5-149 Note Make sure the NVR has properly connected to the network. Version Detection The version detection includes auto detection and manual detection. It displays current system version and application released date. Enable auto detection, NVR interacts with the cloud every day to detect if there is a new version available. When there is a new version, system marks a red point on the Upgrade tab. Note To inform you upgrading firmware timely, we will collect your device information such as IP address, 332 device name, firmware version and serial number. The collected information is used for verifying device legality and pushing upgrade notice. Click manual detection to view the latest new version on the cloud. If current version is the latest one, system prompts that It is the latest version. If there is new version available, system displays new version information such as release date and corresponding release note. Upgrade System Click Start to upgrade the system. 5.12 Information 5.12.1 Version The version interface is shown as in Figure 5-150. Please note the following information for reference only. Here you can view record channel, alarm input/output information, software version, release date and etc. When there is any new version, it prompts found new version. Click it, NVR goes to upgrade interface. 5.12.2 Log Here you can view system log. See Figure 5-151. Figure 5-150 333 Please refer to the following sheet for log parameter information. Figure 5-151 Parameter Function Type Log types include: system operation, configuration operation, data operation, event operation, record operation, user management, log clear. Set the start time of the requested log. Set the end time of the requested log. You can select log type from the drop down list and then click search button to view the list. You can click the stop button to terminate current search operation. You can select one item to view the detailed information. You can click this button to delete all displayed log files. Please note system does not support clear by type. You can click this button to backup log files to current PC. Start time End time Search Detailed information Clear Backup 5.12.3 Online User The online user interface is shown as in Figure 5-152. 334 5.12.4 People Counting From main menu->Info->People counting, the interface is shown as in Figure 5-153. Figure 5-152 5.12.5 Heat Map From main menu->Info->Heat Map, the interface is shown as in Figure 5-154. Figure 5-153 335 Figure 5-154 5.12.6 HDD From main menu->Info->HDD, the HDD interface is shown as in Figure 5-155. Here you can view HDD information. Figure 5-155 5.13 Playback Click Playback button, you can see an interface is shown as in Figure 5-156. 336 Figure 5-156 5.13.1 Search Record Please set record type, record date, window display mode and channel name. Select Date You can click the date on the right pane to select the date. The green highlighted date is system current date and the blue highlighted date means it has record files. Window Split Select window split mode. Click to display in full screen. Click ESC button to exit. See Figure 5-157. Figure 5-157 Select Channel 14 means main stream and A1A4 means sub stream. Select Record Type Check the corresponding box to select record type. See Figure 5-158. Figure 5-158 5.13.2 File List Click File list button, you can see the corresponding files in the list. See Figure 5-159. 337 Figure 5-159 5.13.3 Playback Select a file you want to play and then click Play button, system can begin playback. You can select to playback in full-screen. Please note for one channel, system cannot playback and download at the same time. You can use the playback control bar to implement various operations such as play, pause, stop, slow play, fast play and etc. See Figure 5-160. Figure 5-160 5.13.4 Download Select the file(s) you want to download and then click download button, you can see an interface shown as in Figure 5-161. The Download button becomes Stop button and there is a process bar for your 338 reference. Please go to you default file saved path to view the files. Figure 5-161 5.13.5 Load more It is for you to search record or picture. You can select record channel, record type and record time to download. Or you can use watermark function to verify file. 5.13.5.1 Download By File Select channel, record type, bit stream type and then input start time and end time. Click Search button, the download by file interface is shown as in Figure 5-162. Check the file(s) you want to download and there are two options for you to save the file(s). Download to local Figure 5-162 339 Click Download to local, system pops up the following interface for you to set record format and saved path. See Figure 5-163. Figure 5-163 You can click OK to download and view the download process. After the download operation, you can see corresponding dialog box. Download to USB Connect the corresponding p peripheral device, and then click Download to USB button, you can see the following interface. See Figure 5-164. Figure 5-164 Select Backup device and backup type first and then click Start backup button. After the download operation, you can see corresponding dialogue box. 5.13.5.2 Download by Time Select channel, bit stream type, start time and end time. Click Download to Local button, you can see download by time interface is shown as in Figure 5-165. 340 Figure 5-165 Set record format and saved path, you can click OK to download and view the download process. After the download operation, you can see corresponding dialog box. 5.13.5.3 Watermark Watermark interface is shown as In Figure 5-166. Please select a file and then click Verify button to see the file has been tampered with or not Figure 5-166 5.14 Smart Playback It is to search and playback the IVS file, human face file and plate recognition record. Note 341 There are two types to realize intelligent analytics function. Smart network camera supports intelligent functions: Some smart camera supports the intelligent functions. For NVR, it just displays the intelligent alarm information from the smart network camera and set or playback the record file. NVR supports intelligent functions: The connected network camera does not support intelligent video analytics function. The NVR supports the analytics function. IVS (Behavior Analytics) This function is to playback the intelligent record file of the smart camera. 5.14.1 It is to search and play back the IVS record files. Step1 Select Smart Playback-> IVS. The IVS interface is displayed. See Figure 5-167. Step2 Select the Channel and choose Start Time and End Time. Step3 Click Search. The pictures meeting the conditions are displayed. See Figure 5-168. Figure 5-167 Figure 5-168 Click Delete on the main interface of Smart Playback to clear the set detect type, channel number, start time and end time. Step4 Click the image and you can view the record file. 342 Select a file and then click

, you can save current file to peripheral storage devices. Select a file and then click

, you can lock current file in case it will be overwritten in the future Select a file and then click

, you can mark the time of the detected event. 5.14.2 Plate Recognition It is to search and playback the record file containing the plate number. Step1 Select Smart Playback-> ANPR. The ANPR interface is displayd. See Figure 5-169. Figure 5-169 Step2 Select Channel, Start Time and End Time and set the license number. The system supports plate fuzzy search. All plates will be searched by default if the license number is not set. Step3 Click Search. The images meeting the conditions are displayed. See Figure 5-170. 343 Figure 5-170 Step4 Click the image and you can view the record file. Click Export Plate to export the plate information to local. Select a file and then click

, you can save current file to peripheral storage devices. Select a file and then click

, you can lock current file in case it will be overwritten in the future Select a file and then click

, you can mark the time of the detected event. 5.14.3 Human Face System can search the record containing human face and then replay it. Important Before you use this function, please make sure current channel has enabled human face detection function. Please refer to chapter 5.11.3.4 (Setup->Event->Face Detection) for detailed information. Step1 Select Samrt Playback-> Face Detection. The Face Detection interface is displayed. See Figure 5-171. Figure 5-171 Step2 Select Channel, Start Time and End Time and set the filter conditions. Step3 Click Search. The images meeting the conditions are displayed. See Figure 5-172. 344 The following human faces have been modified for privacy reason. The actually snapshot images have high definition. Figure 5-172 Step4 Click the image and you can view the record file. Select a file and then click

, you can save current file to peripheral storage devices. Select a file and then click

, you can lock current file in case it will be overwritten in the future Select a file and then click

, you can mark the time of the detected event. 5.15 Alarm Click alarm function, you can see an interface is shown as Figure 5-173. Here you can set device alarm type and alarm sound setup (Please make sure you have enabled audio function of corresponding alarm events.). 345 Figure 5-173 Please refer to the following sheet for detailed information. Type Alarm Type Parameter Video loss Motion detection System alarms when motion detection alarm Function System alarms when video loss occurs. Tampering Disk full Disk error External alarm IPC external alarm occurs. System alarms when camera is viciously masking. System alarms when disk is full. System alarms when disk error occurs. Alarm input device sends out alarm. It refers to the on-off signal from the network camera. It can activate the NVR local activation operation. IPC offline alarm System can generate an alarm when the network camera and the NVR are disconnected. Intelligent detect System alarms when IVS alarm occurs. Audio detect System alarms when audio detect is abnormal. Operation Prompt Alarm Sound alarm Play sound Sound path Check the box here, system can automatically pops up an alarm icon on the Alarm button in the main interface when there is an alarm. System sends out alarm sound when an alarm occurs. You can specify as you wish. Here you can specify alarm sound file. 5.16 Log out Click log out button, system goes back to log in interface. See Figure 5-174. You need to input user name and password to login again. 346 Figure 5-174 5.17 Un-install Web Control You can use web un-install tool uninstall web.bat to un-install web control. Please note, before you un-installation, please close all web pages, otherwise the un-installation might result in error 347 6 Glossary DHCP: DHCP (Dynamic Host Configuration Protocol) is a network protocol. It is one of the TCP/IP protocol cluster. It is principally used to assign temporary IP addresses to computers on a network. DDNS: DDNS (Dynamic Domain Name Server) is a service that maps Internet domain names to IP addresses. This service is useful to anyone who wants to operate a server (web server, mail server, ftp server and etc) connected to the internet with a dynamic IP or to someone who wants to connect to an office computer or server from a remote location with software. eSATA: eSATA(External Serial AT) is an interface that provides fast data transfer for external storage devices. It is the extension specifications of a SATA interface. GPS: GPS (Global Positioning System) is a satellite system, protected by the US military, safely orbiting thousands of kilometers above the earth. PPPoE: PPPoE (Point to Point Protocol over Ethernet) is a specification for connecting multiple computer users on an Ethernet local area network to a remote site. Now the popular mode is ADSL and it adopts PPPoE protocol. Wi-Fi: Wi-Fi is the name of a popular wireless networking technology that uses radio waves to provide wireless high-speed Internet and network connections. The standard is for wireless local area networks (WLANs). It is like a common language that all the devices use to communicate to each other. It is actually IEEE802.11, a family of standard The IEEE (Institute of Electrical and Electronics Engineers Inc.) 3G: 3G is the wireless network standard. It is called 3G because it is the third generation of cellular telecom standards. 3G is a faster network for phone and data transmission and speed Is over several hundred kbps. Now there are four standards: CDMA2000, WCDMA, TD-SCDMA and WiMAX. Dual-stream: The dual-stream technology adopts high-rate bit stream for local HD storage such as QCIF/CIF/2CIF/DCIF/4CIF encode and one low-rate bit stream for network transmission such as QCIF/CIF encode. It can balance the local storage and remote network transmission. The dual-stream can meet the difference band width requirements of the local transmission and the remote transmission. In this way, the local transmission using high-bit stream can achieve HD storage and the network transmission adopting low bit stream suitable for the fluency requirements of the 3G network such as WCDMA, EVDO, TD-SCDMA.. On-off value: It is the non-consecutive signal sampling and output. It includes remote sampling and remote output. It has two statuses: 1/0. 348 7 FAQ Questions NVR cannot boot up properly. Solutions Input power is not correct. Power connection is not correct. Power switch button is damaged. Program upgrade is wrong. HDD malfunction or something wrong with HDD ribbon. Seagate DB35.1, DB35.2, SV35 or Maxtor 17-g has compatibility problem. Please upgrade to the latest version to solve this problem. Input voltage is not stable or it is too low. Front panel error. Main board is damaged. HDD malfunction or something wrong with the ribbon. Button power is not enough. Front video signal is not stable. Working environment is too harsh, too much dust. Hardware malfunction. HDD is broken. HDD ribbon is damaged. HDD cable connection is loose. Main board SATA port is broken. Program is not compatible. Please upgrade to the latest version. Brightness is 0. Please restore factory default setup. Check your screen saver. NVR hardware malfunctions. HDD ribbon is damaged. HDD is broken. Upgraded program is not compatible. The recorded file has been overwritten. Record function has been disabled. Video quality setup is too low. Program read error, bit data is too small. There is mosaic in the full screen. Please restart the NVR to solve this problem. HDD data ribbon error. HDD malfunction. NVR hardware malfunctions. Setup is not correct Battery contact is not correct or voltage is too low. Crystal is broken. NVR often automatically shuts down or stops running. System cannot detect hard disk. There is no video output whether it is one-channel, multiple-channel or all-channel output. I cannot search local records. Video is distorted when searching local records. Time display correct. is not 349 Questions Solutions Front panel PTZ error PTZ decoder setup, connection or installation is not correct. Cable connection is not correct. PTZ setup is not correct. PTZ decoder and NVR protocol is not compatible. PTZ decoder and NVR address is not compatible. When there are several decoders, please add 120 Ohm between the PTZ decoder A/B cables furthest end to delete the reverberation or impedance matching. Otherwise the PTZ control is not stable. The distance is too far. For Windows 98 or Windows ME user, please update your system to Windows 2000 sp4. Or you can install client-end software of lower version. Please note right now, our NVR is not compatible with Windows VISTA control. ActiveX control has been disabled. No dx8.1 or higher. Please upgrade display card driver. Network connection error. Network setup error. Password or user name is invalid. Client-end is not compatible with NVR program. Network fluency is not good. Client-end resources are limit. Current user has no right to monitor. IP address conflict. Network is not stable. MAC address conflict. PC or device network card is not good. Burner and NVR are in the same data cable. System uses too much CPU resources. Please stop record first and then begin backup. Data amount exceeds backup device capacity. It may result in burner error. Backup device is not compatible. Backup device is damaged. NVR serial port setup is not correct Address is not correct When there are several switchers, power supply is not enough. Transmission distance is too far. NVR cannot control PTZ. I cannot log in client-end or web. There is only mosaic no video when preview or playback video file remotely. Network connection not stable. is Burn error /USB back error. Keyboard cannot control NVR. 350 Questions Solutions Alarm signal cannot been disarmed. Alarm setup is not correct. Alarm output has been open manually. Some program versions may have this problem. Please upgrade Input device error or connection is not correct. Alarm function is null. Record storage period is not enough. Cannot playback the downloaded file. Forgot local menu operation password or network password There is no video. The screen is in black. The displayed video is not full in the monitor. There is no HDMI output. The video is not fluent when in multiple-channel mode from the client-end. view I your system. Alarm setup is not correct. Alarm cable connection is not correct. Alarm input signal is not correct. There are two loops connect to one alarm device. Camera quality is too low. Lens is dirty. Camera is installed against the light. Camera aperture setup is not correct. HDD capacity is not enough. HDD is damaged. There is no media player. No DXB8.1 or higher graphic acceleration software. There is no DivX503Bundle.exe control when you play the file transformed to AVI via media player. No DivX503Bundle.exe or ffdshow-2004 1012 .exe in Windows XP OS. Please contact your local service engineer or our sales person for help. We can guide you to solve this problem. IPC IP address is not right. IPC port number is not right. IPC account (user name/password) is not right. IPC is offline. Please cheek current resolution setup. If the current setup is 1920*1080, then you need to set the monitor resolution as 1920*1080. Displayer is not in HDMI mode. HDMI cable connection is not right. The network bandwidth is not sufficient. The multiple-channel monitor operation needs at least 100M or higher. Your PC resources are not sufficient. For 16-ch remote monitor operation, the PC shall have the following environment:

Quad Core, 2G or higher memory, independent displayer, display card memory 256M or higher. 351 Questions Solutions I can not connect to the IPC I set After the NVR resolution as 1080P, my monitor can not display. Please make sure the IPC has booted up. The device has connected to the too many IPC. It cannot transmit IPC network connection is right and it is online IPC IP is in the blacklist. the video. Check the IPC port value and the time zone is the same as the NVR. Make sure current network environment is stable. Shut down the device and then reboot. When you reboot, please press the Fn button at the same time and then release after 5 seconds. You can restore NVR resolution to the default setup. Use telnet and then input the following command:

My admin account has been changed and I can not log in. cd /mnt/mtd/Config/

rm -rf group rm -rf password After I login the Web , I can not find the remote interface to add the IPC. There is IP and gateway, I can access the internet via the router. But I can not access the internet after I reboot the NVR. I use the VGA montior.I want to know if I use the multple-window mode, I see the video from the main stream or the sub stream?

Reboot the device to restore the default password. Please clear the Web controls and load again. Please use command PING to check you can connect to the gateway or not. Use telnet to access and then use command ifconfig a to check device IP address. If you see the subnet mask and the gateway has changed after the reboot. Please upgrade the applications and set again. For 32-channel series product, the 9/16-window is using the sub stream. For 4/8/16 series product, system is using the main stream no matter you are in what display mode. Daily Maintenance Please use the brush to clean the board, socket connector and the chassis regularly. The device shall be soundly earthed in case there is audio/video disturbance. Keep the device away from the static voltage or induced voltage. Please unplug the power cable before you remove the audio/video signal cable, RS232 or RS485 cable. Do not connect the TV to the local video output port (VOUT).It may result in video output circuit. Always shut down the device properly. Please use the shutdown function in the menu, or you can press the power button in the rear pane for at least three seconds to shut down the device. 352 Otherwise it may result in HDD malfunction. Please make sure the device is away from the direct sunlight or other heating sources. Please keep the sound ventilation. Please check and maintain the device regularly. 353 8 Appendix A HDD Capacity Calculation Calculate total capacity needed by each device according to video recording (video recording type and video file storage time). Step 1: According to Formula (1) to calculate storage capacity iq that is the capacity of each channel needed for each hour, unit Mbyte. q i d i 8 3600 1024

(1) In the formula:

id means the bit rate, unit Kbit/s Step 2: After video time requirement is confirmed, according to Formula (2) to calculate the storage capacity im , which is storage of each channel needed unit Mbyte. im =

iq ih iD (2) In the formula:

ih means the recording time for each day (hour) iD means number of days for which the video shall be kept Step 3: According to Formula (3) to calculate total capacity (accumulation) Tq that is needed for all channels in the device during scheduled video recording. q T c i 1 m i

(3) In the formula: c means total number of channels in one device Step 4: According to Formula (4) to calculate total capacity (accumulation) Tq that is needed for all channels in device during alarm video recording (including motion detection). q T c i 1 m i a% (4) In the formula:a% means alarm occurrence rate 354 9 Appendix B Compatible Network Camera List Please note all the models in the following list for reference only. For those products not included in the list, please contact your local retailer or technical supporting engineer for detailed information. Manufact ure AXIS Video Encode Audio/Vid Protocol Version Model eo ONVIF/Private ONVIF/Private H264 H264 P5532-P ACM-3511 ACM-8221 5.40.9.2 5.40.9.2 P1346 P3344/P3344-

E P5512 Q1604 Q1604-E Q6034E Q6035 Q1755 M7001 M3204 P3367 5.40.3.2 5.40.9 5.40.9 5.40.9.2 HEAD LFP4_0 130220 HEAD LFP4_0 130220 A1D-220-V3.12

.15-AC A1D-220-V3.13

.16-AC 65246 AV1115 65197 AV10005DN 65246 AV2115DN 65199 AV2515DN 65197 AV2815 65246 AV5115DN 65197 AV8185DN NBN-921-P NBC-455-12P VG5-825 NBN-832 VEZ-211-IWT EIVA NBC-255-P VIP-X1XF B0100 D100 GE-100-CB FB-100A FD-100A 15500152 v1.0.3.9 v1.0.3.3 9500453 66500500 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 MPEG4 MPEG4 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private Private Private ONVIF ONVIF Private Private Private Private Private Private Private Private Private ONVIF ONVIF ONVIF ONVIF ONVIF ONVIF ONVIF ONVIF ONVIF ONVIF ONVIF ONVIF 355 ACTi Arecont Bosch Brikcom Model Version Video Encode Audio/Vid Protocol Manufact ure Cannon CNB VB-M400 MPix2.0DIR VIPBL1.3MIR VF IGC-2050F CP PLUS CP-NC9-K CP-NC9W-K CP-ND10-R CP-ND20-R CP-NS12W-C R VS201 CP-NB20-R H264 H264 H264 H264 XNETM112011 1229 XNETM210011 1229 XNETM210011 1229 6.E.2.7776 6.E.2.7776 cp20111129AN S cp20111129AN S cp20110808NS H264 H264 H264 H264 H264 cp20111129NS H264 cp20110808BN H264 S cp20110808BN S cp20110808NS H264 H264 CP-NT20VL3-

R CP-NS36W-A R CP-ND20VL2-

R CP-RNP-1820 cp20120821NS cp20110808BN S H264 H264 CP-RNC-TP2 0FL3C CP-RNP-12D CP-RNC-DV1 0 CP-RNC-DP2 0FL2C ICS-13 ICS-20W NA222 MPC-IPVD-03 13 MPC-IPVD-03 13AF Dynacolor H264 H264 H264 A cp20120821NS A cp20120828AN S cp20120821NS A cp20120821NS A d20120214NS H264 vt20111123NSA H264 H264 k20111208ANS H264 H264 k20111208BNS H264 Honeywell HIDC-1100PT h.2.2.1824 h.2.2.1824 HIDC-1100P H264 H264 eo Private ONVIF ONVIF ONVIF ONVIF/Private Private ONVIF ONVIF ONVIF ONVIF ONVIF ONVIF ONVIF ONVIF Private Private Private Private Private ONVIF/Private ONVIF/Private ONVIF ONVIF/Private ONVIF/Private ONVIF ONVIF 356 Model Version Video Encode Audio/Vid Protocol Manufact ure LG Imatek HIDC-0100P HIDC-1300V HICC-1300W HICC-2300 HDZ20HDX h.2.2.1824 2.0.0.21 2.0.1.7 2.0.0.21 H20130114NS A LW342-FP LNB5100 KNC-B5000 KNC-B5162 KNC-B2161 1.41 1.03 1.41 1.41 1.41 Panasonic NP240/CH WV-NP502 WV-SP102H WV-SP105H 1.41 WV-SP302H WV-SP306H 1.4 WV-SP508H WV-SP509H WV-SF332H WV-SW316H WV-SW355H WV-SW352H WV-SW152E WV-SW558H WV-SW559H WV-SP105H WV-SW155E WV-SF336H WV-SF332H WV-SF132E WV-SF135E WV-SF346H WV-SF342H WV-SC385H WV-SC386H WV-SP539 DG-SC385 IXSOLW PELCO IDE20DN 1.03 1.03 1.44 1.41 1.03 1.03 1.41 1.41 1.08 1.08 1.66 1.66 1.8.1-20110912

-1.9082-A1.661 7 1.7.41.9111-O3

.6725 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 MPEG4 MPEG4 H264 H264 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264 H264 eo ONVIF ONVIF ONVIF ONVIF ONVIF Private ONVIF Private Private Private Private Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF ONVIF Private Private 357 Manufact ure Model Version Video Encode Audio/Vid Protocol Sony H264 H264 D5118 IM10C10 MPEG4 MPEG4 H264 DD4N-X DD423-X D5220 1.7.8.9310-A1. 5288 1.6.13.9261-O2

.4657 01.02.0015 01.02.0006 1.8.3-FC2-2012 0614-1.9320-A 1.8035 Samsung SNB-3000P 2.41 H264MPEG4 SNP-3120 1.22_110120_1 H264MPEG4 SNP-3370 1.21_110318 SNB-5000 2.10_111227 SND-5080 SNZ-5200 1.02_110512 SNP-5200 1.04_110825 SNB-7000 1.10_110819 SNB-6004 V1.0.0 SNC-DH110 1.50.00 SNC-CH120 1.50.00 SNC-CH135 1.73.01 SNC-CH140 1.50.00 SNC-CH210 1.73.00 SNC-DH210 1.73.00 SNC-DH240 1.50.00 SNC-DH240-T 1.73.01 1.74.01 SNC-CH260 SNC-CH280 1.73.01 1.73.00 SNC-RH-124 1.73.00 SNC-RS46P SNC-ER550 1.74.01 1.74.01 SNC-ER580 1.78.00 SNC-ER580 SNC-VM631 1.4.0 1.61.00 WV-SP306 1.61.00 WV-SP306 SNC-VB600 1.5.0 1.5.0 SNC-VM600 1.5.0 SNC-VB630 SNC-VM630 1.5.0 VCC-HDN400 0PC MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264MPEG4 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264 H264MPEG4 H264 H264 H264 H264 H264 H264 SANYO eo Private Private Private Private Private ONVIF/Private ONVIF/Private Private ONVIF/Private Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF/Private ONVIF ONVIF SDK ONVIF Private Private Private Private ONVIF 358 ZHEJIANG DAHUA VISION TECHNOLOGY CO.,LTD. Address:No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Postcode: 310053 Tel: +86-571-87688883 Fax: +86-571-87688815 Email:overseas@dahuatech.com Website: www.dahuasecurity.com 359