FCC ID: SVN-0301R-W Wi-Fi Villa Door Station

Villa Door Station Quick Start Guide V1.0.0 Quick Start Guide Foreword General This manual introduces the functions and operations of the villa door station and second confirmation station (hereinafter referred to as the "VTO"), and the accessory (hereinafter referred to as the "VTM"). Safety Instructions The following signal words might appear in the manual. Signal Words Meaning Indicates a high potential hazard which, if not avoided, will result in death or serious injury. Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury. Indicates a potential risk which, if not avoided, could result in property damage, data loss, reductions in performance, or unpredictable results. Provides methods to help you solve a problem or save time. Provides additional information as a supplement to the text. Revision History Revision Content Release Time Revision Content V1.0.0 First Release. November 2021 Privacy Protection Notice As the device user or data controller, you might collect the personal data of others such as their face, fingerprints, and license plate number. You need to be in compliance with your local privacy protection laws and regulations to protect the legitimate rights and interests of other people by implementing measures which include but are not limited: Providing clear and visible identification to inform people of the existence of the surveillance area and provide required contact information. About the Manual the product. The manual is for reference only. Slight differences might be found between the manual and We are not liable for losses incurred due to operating the product in ways that are not in compliance with the manual. The manual will be updated according to the latest laws and regulations of related jurisdictions. For detailed information, see the paper users manual, use our CD-ROM, scan I Quick Start Guide the QR code or visit our official website. The manual is for reference only. Slight differences might be found between the electronic version and the paper version. All designs and software are subject to change without prior written notice. Product updates might result in some differences appearing between the actual product and the manual. Please contact customer service for the latest program and supplementary documentation. There might be errors in the print or deviations in the description of the functions, operations and technical data. If there is any doubt or dispute, we reserve the right of final explanation. Upgrade the reader software or try other mainstream reader software if the manual (in PDF All trademarks, registered trademarks and company names in the manual are properties of Please visit our website, contact the supplier or customer service if any problems occur while format) cannot be opened. their respective owners. using the device. If there is any uncertainty or controversy, we reserve the right of final explanation. II device. Quick Start Guide Important Safeguards and Warnings This section introduces content covering the proper handling of the device, hazard prevention, and prevention of property damage. Read carefully before using the device, comply with the guidelines when using it, and keep the manual safe for future reference. Operation Requirements Check whether the power supply is correct before use. Do not unplug the power cord on the side of the device while the adapter is powered on. Operate the device within the rated range of power input and output. Transport, use and store the device under allowed humidity and temperature conditions. Do not drop or splash liquid onto the device, and make sure that there is no object filled with liquid on the device to prevent liquid from flowing into it. Do not disassemble the device without professional instruction. Installation Requirements Do not connect the power adapter to the device while the adapter is powered on. Strictly comply with the local electric safety code and standards. Make sure the ambient voltage is stable and meets the power supply requirements of the device. Do not connect the device to two or more kinds of power supplies, to avoid damage to the Improper use of the battery might result in a fire or explosion. Personnel working at heights must take all necessary measures to ensure personal safety including wearing a helmet and safety belts. Do not place the device in a place exposed to sunlight or near heat sources. Install the device on a stable surface to prevent it from falling. Install the device in a well-ventilated place, and do not block its ventilation. Use an adapter or cabinet power supply provided by the manufacturer. Use the power cords that are recommended for the region and conform to the rated power specifications. The device is a class I electrical appliance. Make sure that the power supply of the device is connected to a power socket with protective earthing. III Table of Contents Foreword .................................................................................................................................................... I Important Safeguards and Warnings .................................................................................................... III 1 Structure ................................................................................................................................................. 1 Villa Door Station (multiple buttons) ............................................................................................. 1 1.1.1 Front Panel ......................................................................................................................... 1 1.1.2 Rear Panel .......................................................................................................................... 2 Villa Door Station (single button) .................................................................................................. 3 1.2.1 Front Panel ......................................................................................................................... 3 1.2.2 Rear Panel .......................................................................................................................... 3 Button Model ................................................................................................................................. 6 1.3.1 Front Panel ......................................................................................................................... 6 1.3.2 Rear Panel .......................................................................................................................... 7 2 Installation .............................................................................................................................................. 8 Preparations .................................................................................................................................. 8 Installation Guide .......................................................................................................................... 8 2.2.1 Villa Door Station (multiple buttons) ................................................................................... 8 2.2.2 Villa Door Station (single button) ........................................................................................ 9 2.2.3 Button Model ...................................................................................................................... 11 3 Web Configuration .............................................................................................................................. 13 Initializing VTO ............................................................................................................................ 13 Configuring Network Parameters ................................................................................................ 15 Configuring SIP Servers ............................................................................................................. 16 Configuring VTO Numbers .......................................................................................................... 18 Configuring Call Numbers and Group Call ................................................................................. 18 Adding VTOs ............................................................................................................................... 19 Adding VTH Room Number ........................................................................................................ 21 Binding VTH Room Numbers (For Certain Models Only) ........................................................... 23 Issuing Cards .............................................................................................................................. 25 4 Commissioning ................................................................................................................................... 28 VTO Calling VTH ......................................................................................................................... 28 VTH Monitoring VTO ................................................................................................................... 28 Cybersecurity Recommendations ................................................................................... 30 1 Structure Quick Start Guide Villa Door Station (multiple buttons) 1.1.1 Front Panel Front panel No. 1 2 3 4 5 6 Table 1-1 Components Function Audio input. Name MIC Illuminator Provide a constant light to focus more easily on a subject in dark surroundings. Camera Capture images or record videos for the VTO. Call buttons Call the VTH. Card swiping area Swipe the registered cards to unlock doors. Indicators From left to right:

RingVTO is calling the VTH. TalkingVTO is on the talk with the VTH. UnlockingVTO unlocking successful. 1 1.1.2 Rear Panel The function ports might differ depending on the model. Rear panel Quick Start Guide No. Name Function Table 1-2 Components 1 2 3 4 SD card slot Used to insert SD card so that data information such as images and videos can be stored. Functional ports Alarm port, door detector port, 485 port, power port and etc. Network port RJ-485 network port to connect to the network. Reset button Press and hold the button for several seconds to do factory reset. 2 Quick Start Guide Villa Door Station (single button) 1.2.1 Front Panel There are different models with different front panel. Differences in size and appearance are found depending on your model. Front panel Table 1-3 Components Function Audio input. Name MIC Camera Call button Call the VTH. Card swiping area Speaker Audio output. Capture images or record videos for the VTO. Swipe the registered cards to unlock doors. The card swiping function is only supported by some models. No. 1 2 3 4 5 1.2.2 Rear Panel 3 The function ports might differ depending on the model. Here are two models used as examples. Rear panel (1) Quick Start Guide Table 1-4 Components No. Name Function Network port Used to connect to the network. 1 2 3 4 SD card slot Reset button Functional port Used to insert SD card so that data information such as images and videos can be stored. Press and hold the button for several seconds to do factory reset. For some models, the functional port only has a power input port to connect to power supply. For some models, the functional port includes a power input port and a door detector port. 4 Rear panel (2) Quick Start Guide Table 1-5 Components No. Name Function 1 2 3 SD card slot Used to insert SD card so that data information such as images and videos can be stored. Power port Used to connect to the power supply. Reset button Press and hold the button for several seconds to do factory reset. 5 Button Model 1.3.1 Front Panel Front panel Quick Start Guide No. 1 Table 1-6 Components Name Function Press button The button model can be connected to the VTH. Press the button on the model and the VTH receives an alarm signal. 6 1.3.2 Rear Panel Rear panel Quick Start Guide No. 1 Table 1-7 Components Name Function Functional port Used for alarm input. 7 2 Installation Quick Start Guide Preparations This chapter introduces precautions in installation. For detailed steps, see the corresponding installation guide. Do not expose the VTO to condensation, high temperature, direct sunlight, stain, dust, and chemically corrosive substances. Installation should be done by professional teams. Do not dismantle or repair the VTO by yourself in case of device failure. Contact after-sales service if you need any help. Prepare cross screwdrivers and gloves yourself. Installation Guide 2.2.1 Villa Door Station (multiple buttons) Open the port cover of the VTO, drill screw holes on the wall according to the dimension of the mounting hole on the rear panel of the VTO, and put the expansion bolts into the holes. Complete the cable wiring. Fix the port cover to the rear panel of the VTO with four screws. Fix the bare VTO on the wall with four screws. Install the mount box on the VTO from top to the bottom, and then fix it with two screws. Fix the rain over on the top of the VTO with two screws. Dimension (mm [inch]) 8 Installation Quick Start Guide 2.2.2 Villa Door Station (single button) Here are examples of two models installation, depending on differences in model dimensions. Model Example 1:

Open the port cover of the VTO, drill screw holes on the wall according to the dimension of the mounting hole on the rear panel of the VTO. Complete the cable wiring. Fix the port cover to the rear panel of the VTO with four screws. Fix the VTO on the wall with screws. Dimension (mm [inch]) 9 Installation Quick Start Guide Model Example 2:

Open the port cover of the VTO, drill screw holes on the wall according to the dimension of the mounting hole on the rear panel of the VTO. Complete the cable wiring. Fix the port cover to the rear panel of the VTO with four screws. Fix the VTO on the wall with screws. Dimension (mm [inch]) 10 2.2.3 Button Model Open the port cover of the button model, drill screw holes on the wall according to the dimension of the mounting hole on the rear panel of the button model. Complete the cable wiring. Fix the port cover to the rear panel of the button model with four screws. Fix the button model on the wall with screws. Dimension (mm [inch]) Installation Quick Start Guide 11 Installation Quick Start Guide 12 3 Web Configuration Quick Start Guide This chapter provides a step-by-step configuration of the VTO, as well as how to register digital indoor monitors (hereinafter referred to as the "VTH") into the VTO to realize its intercom function. Follow the instructions below to get started. The snapshots are for reference only and slight differences might be found in the actual web page of the VTO, depending on your model. You can download the configuration tool VDPConfig and use it to configure and update multiple devices. For details, see the corresponding user's manual. Initializing VTO For the first time login, you need to initialize the VTO. Step 1 Power on the VTO. Step 2 Go to the default IP address (192.168.1.108) of the VTO in the browser address bar, and then press the Enter key to go to the web page of the VTO. The user name is admin by default. Make sure that the IP address of the PC is on the same network segment as the Step 3 On the Device Init page, enter and confirm the password, and then click Next. VTO. The password must consist of 832 non-blank characters and contain at least two types of the following characters: Uppercase, lowercase, numbers, and special characters (excluding ' " ; : &). 13 Device initialization Quick Start Guide Step 4 Select the Email checkbox and enter email address. This helps you to reset your password when your password is lost or forgotten. Figure 3-2 Set an email address Step 5 Click Next. 14 Figure 3-3 Initialization successful Quick Start Guide Step 6 Click OK. Enter username (admin by default) and the new password to log in to the web page. Figure 3-4 Login page Configuring Network Parameters You need to configure the TCP/IP information to connect the VTO to the network. The descriptions below are for models with a Wireless LAN card. A Wireless LAN device is optional. Wireless LAN LAN Log into the VTO web page. Select Network > Basic. Configure the TCP/IP parameters in the WLAN section. Log into the VTO web page. Select Network > Basic. 15 Configure the TCP/IP parameters in the LAN section. Figure 3-5 Network configuration Quick Start Guide Table 3-1 Parameter description Parameter Description IP Address Your planned IP address for the VTO. Preferred DNS The default is 8.8.8.8. Alternate DNS The default is 8.8.4.4. Transmission Mode Mode 1: Multicast streaming (UDP). Mode 2: RTSP streaming (TCP). It is transmission Mode 1 by default. DHCP Enable the function to get the allocated IP address for the VTO. Configuring SIP Servers When connected to the same SIP server, VTOs and VTHs can call each other. You can use a VTO or a platform as the SIP server. We recommend you use a VTO as the SIP server in the villa scenario. Step 1 Log in to the VTO web page. Step 2 Select Network > SIP Server. Step 3 Configure the parameters. 1) If the current VTO you have logged in works as the SIP server, enable SIP Server, and then keep other parameters by default. 16 Current VTO as the SIP server Quick Start Guide 2) If other VTOs work as the SIP server, set Server Type as VTO, and then configure the parameters. Do not enable SIP Server, otherwise the connection fails. Other VTOs as the SIP server Table 3-2 Parameter description Parameter Description IP Address The one that you planned for the VTO. Port 5060 by default when a VTO works as SIP server. When the VTO you logged in works as the SIP server, leave the SIP Domain SIP domain value by default. When another VTO works as the SIP server, you can leave the SIP domain by default or keep it null. Username/Passwor d Used to log in to the web page of the VTO. 17 Quick Start Guide Parameter Description Server SIP Username/

Password Used to log in to the SIP server. Configuring VTO Numbers Numbers can be used to distinguish each VTO. In the villa scenario, we recommend you configure the VTO numbers based on your needs. Background Information The VTO number can contain up to 5 numbers, and it must not be the same as other room number you have already configured. If a VTO serves as the SIP server, its room number is 8001 by default. You cannot change it. Procedure Step 1 Log in to the VTO web page. Step 2 Select Local Settings > Basic. Step 3 Enter the room number you planned for the VTO in No., and then click Confirm. Figure 3-7 Configuring VTO Numbers Configuring Call Numbers and Group Call Configure basic properties for the VTO, including group call functions, center call number and villa call numbers. Step 1 Log in to the VTO web page. Step 2 Select Local Settings > Basic. Figure 3-8 Device properties Step 3 Configure the parameters. 18 Parameter Device Type Device Name Villa Call No. No. Quick Start Guide Table 3-3 Parameter description Description Villa Station. The name you planned for your VTO. You could keep it null. Used to call VTHs. It should contain no more than 9 numbers. VTO number. 8001 by default when the VTO is selected to work as the SIP server. Center Call No. Used to call the center station. It is 888888 by default. Group Call Enable it for group call. Step 4 Click Save. Adding VTOs You can add other VTOs to the SIP server (in the Villa scenario a VTO serves as the SIP server), and all the VTOs connected to the same SIP server can make video call to each other. Before you start, make sure that you have already select a VTO to work as the SIP server (VTO number 8001). Prerequisites Procedure Step 1 Log in to the web page of the VTO that works as the SIP server. Step 2 Select Household Setting > VTO No. Management. Step 3 Select Add. 19 Figure 3-9 VTO No. Management Quick Start Guide Step 4 Configure the parameters. Figure 3-10 Add VTOs Table 3-4 Parameters Parameter Description Rec No. VTO room number. 20 Quick Start Guide Parameter Description Register Password Keep it by default. Keep them null when the VTO serves as the SIP server. The two parameters are only applicable when the platform works as the SIP server. IP Address VTO IP address. The username and password used to log in to the web page of the VTO. Build No. Unit No. Username Password Adding VTH Room Number When VTO serves as the SIP server, you can add VTH into the main VTO to achieve intercom functions. Step 1 Log in to the VTO web page. Step 2 Select Household Setting > VTH Management. Figure 3-11 VTH Management Step 3 Select Add to register new VTH onto the main VTO. 21 Figure 3-12 Add VTH Quick Start Guide Step 4 Configure the parameters. Parameters Description Table 3-5 Description First Name Last Name Nick Name Room No. Information used to differentiate each room. You can also keep them null. The room number can contain 6 digits of numbers of letters or their combination at most, and it cannot be the same as any VTO number. When there are multiple VTHs, the room number for the master VTH should end with #0 and the room numbers for extension VTHs with #1,

#2 Registration Mode Select Public. Leave it as default. Registration Password Step 5 Click Save. Related Operations Click to modify room information, and to delete the room. 22 Binding VTH Room Numbers (For Certain Models Quick Start Guide Only) This section only applies to the VTO model that with multiple buttons. Log in to the VTO web page. Select Local Settings > Basic. In the Faade Layout section, select Count types. Count 1: Can only bind one room number. Count 2: Can bind two room numbers. Count 4: Can bind four room numbers. Count Click on the white module, and select the room number from the Room List you want to bind. 23 White module Quick Start Guide Click Save to save the selected room number. Click Confirm to save all the settings. Confirm Room list 24 Quick Start Guide Issuing Cards Issue an access card to unlock the door of a room. To use this function, the VTO must have a card reader. Log in to the VTO web page. Select Household Setting > Personnel Management. Figure 3-13 Personnel management Click Add. Add Personnel Information Enter the parameters, and then click Save. The personnel information displays on the web page. For some VTO models, the QR code is embedded in the Personnel Management page. Yet for some models, you need to go to Network > Basic > Cloud Service to check the QR code. 25 Figure 3-14 Operation succeed Quick Start Guide Select to go to the card issuing window. Figure 3-15 Card issuing window Click Issue Card to issue cards. The web page displays the countdown prompt (120 s). Once the countdown starts, you need to swipe the card on the card reader of the VTO within this time period. After the swiping, the card number will be automatically recognized by the VTO. 26 Figure 3-16 Countdown in process Quick Start Guide Click Confirm Send Card after swiping to complete the issuing process. Other Operations to open the door. Click to set it to loss, and then the icon changes to

. The lost card cannot be used Click or to modify the username or delete the card. 27 4 Commissioning Quick Start Guide After the basic configuration is complete, check whether the intercom communication works. VTO Calling VTH Once the VTO and VTH are connected, the duel communication function is enabled. Step 1 Dial a room number (for example, 9901) on the VTO. to answer the call on the VTH. Step 2 Tap Figure 4-1 Call Screen VTH Monitoring VTO A VTH can monitor the VTO. Step 1 On the home screen of the VTH, select Monitor > Door. Step 2 Set the VTO to go to the monitoring screen. Step 3 Tap the icon to view the video. 28 Figure 4-2 Door Quick Start Guide Figure 4-3 Monitoring 29 Quick Start Guide Cybersecurity Recommendations Mandatory actions to be taken for basic equipment network security:

1. Use Strong Passwords Please refer to the following suggestions to set passwords:

The length should not be less than 8 characters. Include at least two types of characters; character types include upper and lower case letters, numbers and symbols. Do not contain the account name or the account name in reverse order. Do not use continuous characters, such as 123, abc, etc. Do not use overlapped characters, such as 111, aaa, etc. 2. Update Firmware and Client Software in Time According to the standard procedure in Tech-industry, we recommend to keep your equipment (such as NVR, DVR, IP camera, etc.) firmware up-to-date to ensure the system is equipped with the latest security patches and fixes. When the equipment is connected to the public network, it is recommended to enable the auto-check for updates function to obtain timely information of firmware updates released by the manufacturer. We suggest that you download and use the latest version of client software.

"Nice to have" recommendations to improve your equipment network security:

1. Physical Protection We suggest that you perform physical protection to equipment, especially storage devices. For example, place the equipment in a special computer room and cabinet, and implement well-done access control permission and key management to prevent unauthorized personnel from carrying out physical contacts such as damaging hardware, unauthorized connection of removable equipment (such as USB flash disk, serial port), etc. 2. Change Passwords Regularly We suggest that you change passwords regularly to reduce the risk of being guessed or cracked. 3. Set and Update Passwords Reset Information Timely The device supports password reset function. Please set up related information for password reset in time, including the end users mailbox and password protection questions. If the information changes, please modify it in time. When setting password protection questions, it is suggested not to use those that can be easily guessed. 4. Enable Account Lock The account lock feature is enabled by default, and we recommend you to keep it on to guarantee the account security. If an attacker attempts to log in with the wrong password several times, the corresponding account and the source IP address will be locked. 5. Change Default HTTP and Other Service Ports We suggest you to change default HTTP and other service ports into any set of numbers between 102465535, reducing the risk of outsiders being able to guess which ports you are using. 6. Enable HTTPS 30 Quick Start Guide We suggest you to enable HTTPS, so that you visit Web service through a secure communication channel. 7. MAC Address Binding We recommend you to bind the IP and MAC address of the gateway to the equipment, thus reducing the risk of ARP spoofing. 8. Assign Accounts and Privileges Reasonably According to business and management requirements, reasonably add users and assign a minimum set of permissions to them. 9. Disable Unnecessary Services and Choose Secure Modes If not needed, it is recommended to turn off some services such as SNMP, SMTP, UPnP, etc., to reduce risks. If necessary, it is highly recommended that you use safe modes, including but not limited to the following services:

SNMP: Choose SNMP v3, and set up strong encryption passwords and authentication passwords. SMTP: Choose TLS to access mailbox server. FTP: Choose SFTP, and set up strong passwords. AP hotspot: Choose WPA2-PSK encryption mode, and set up strong passwords. 10. Audio and Video Encrypted Transmission If your audio and video data contents are very important or sensitive, we recommend that you use encrypted transmission function, to reduce the risk of audio and video data being stolen during transmission. Reminder: encrypted transmission will cause some loss in transmission efficiency. 11. Secure Auditing Check online users: we suggest that you check online users regularly to see if the device is logged in without authorization. Check equipment log: By viewing the logs, you can know the IP addresses that were used to log in to your devices and their key operations. 12. Network Log Due to the limited storage capacity of the equipment, the stored log is limited. If you need to save the log for a long time, it is recommended that you enable the network log function to ensure that the critical logs are synchronized to the network log server for tracing. 13. Construct a Safe Network Environment In order to better ensure the safety of equipment and reduce potential cyber risks, we recommend:

Disable the port mapping function of the router to avoid direct access to the intranet devices from external network. The network should be partitioned and isolated according to the actual network needs. If there are no communication requirements between two sub networks, it is suggested to use VLAN, network GAP and other technologies to partition the network, so as to achieve the network isolation effect. Establish the 802.1x access authentication system to reduce the risk of unauthorized Enable IP/MAC address filtering function to limit the range of hosts allowed to access the access to private networks. device. 31 Quick Start Guide

Villa Door Station Users Manual V1.0.0 Foreword General Safety Instructions This manual introduces basic operations of the digital door station (hereinafter referred to as

"VTO"). The following categorized signal words with defined meaning might appear in the manual. Signal Words Meaning DANGER WARNING CAUTION TIPS NOTE Indicates a high potential hazard which, if not avoided, will result in death or serious injury. Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury. Indicates a potential risk which, if not avoided, could result in property damage, data loss, lower performance, or unpredictable result. Provides methods to help you solve a problem or save you time. Provides additional information as the emphasis and supplement to the text. Revision History Privacy Protection Notice Version V1.0.0 Revision Content First release. Release Date November 2021 As the device user or data controller, you might collect the personal data of others such as their face, fingerprints, and license plate number. You need to be in compliance with your local privacy protection laws and regulations to protect the legitimate rights and interests of other people by implementing measures which include but are not limited: Providing clear and visible identification to inform people of the existence of the surveillance area and provide required contact information. About the Manual The manual is for reference only. Slight differences might be found between the manual We are not liable for losses incurred due to operating the product in ways that are not in and the product. compliance with the manual. The manual will be updated according to the latest laws and regulations of related I jurisdictions. For detailed information, see the paper users manual, use our CD-ROM, scan the QR code or visit our official website. The manual is for reference only. Slight differences might be found between the electronic version and the paper version. All designs and software are subject to change without prior written notice. Product updates might result in some differences appearing between the actual product and the manual. Please contact customer service for the latest program and supplementary documentation. There might be errors in the print or deviations in the description of the functions, operations and technical data. If there is any doubt or dispute, we reserve the right of final explanation. Upgrade the reader software or try other mainstream reader software if the manual (in PDF All trademarks, registered trademarks and company names in the manual are properties of format) cannot be opened. their respective owners. Please visit our website, contact the supplier or customer service if any problems occur while using the device. If there is any uncertainty or controversy, we reserve the right of final explanation. II Important Safeguards and Warnings This section introduces content covering the proper handling of the device, hazard prevention, and prevention of property damage. Read carefully before using the device, comply with the guidelines when using it, and keep the manual safe for future reference. Check whether the power supply is correct before use. Do not unplug the power cord on the side of the device while the adapter is powered on. Operate the device within the rated range of power input and output. Transport, use and store the device under allowed humidity and temperature conditions. Do not drop or splash liquid onto the device, and make sure that there is no object filled with liquid on the device to prevent liquid from flowing into it. Do not disassemble the device without professional instruction. Operation Requirements Installation Requirements WARNING Strictly comply with the local electric safety code and standards. Make sure the ambient voltage is stable and meets the power supply requirements of the device. Do not connect the device to two or more kinds of power supplies, to avoid damage to the Improper use of the battery might result in a fire or explosion. device. Personnel working at heights must take all necessary measures to ensure personal safety including wearing a helmet and safety belts. Do not place the device in a place exposed to sunlight or near heat sources. Keep the device away from dampness, dust, and soot. Install the device in a well-ventilated place, and do not block its ventilation. Use an adapter or cabinet power supply provided by the manufacturer. Use the power cords that are recommended for the region and conform to the rated power specifications. Make sure the power supply meets the SELV (Safety Extra Low Voltage) requirements, and rated voltage conforms to the IEC60065, IEC60950-1 or IEC62368-1 standard. The requirements of the power supply are subject to the device label. III Table of Contents Foreword .................................................................................................................................................... I Important Safeguards and Warnings .................................................................................................... III 1 Initializing the VTO ................................................................................................................................ 1 2 Login and Resetting Password............................................................................................................ 3 Login .............................................................................................................................................. 3 Resetting Password ...................................................................................................................... 3 3 Home Page ............................................................................................................................................. 5 4 Local Settings ........................................................................................................................................ 6 Basic .............................................................................................................................................. 6 Video & Audio ................................................................................................................................ 9 Access Control Settings ............................................................................................................... 11 4.3.1 Local .................................................................................................................................. 11 4.3.2 RS-485 .............................................................................................................................. 12 System ........................................................................................................................................ 13 Security ....................................................................................................................................... 14 Onvif User ................................................................................................................................... 16 Upload File .................................................................................................................................. 17 5 Household Setting ............................................................................................................................... 19 VTO No. Management ................................................................................................................ 19 VTH Management ....................................................................................................................... 20 Personnel Management .............................................................................................................. 21 VTS Management ....................................................................................................................... 24 Status .......................................................................................................................................... 25 6 Network ................................................................................................................................................ 26 Basic ............................................................................................................................................ 26 6.1.1 TCP/IP .............................................................................................................................. 26 6.1.2 Port ................................................................................................................................... 26 6.1.3 Cloud service .................................................................................................................... 27 UPnP ........................................................................................................................................... 28 6.2.2 Enabling UPnP Services .................................................................................................. 28 6.2.3 Adding UPnP Services ...................................................................................................... 28 SIP Server ................................................................................................................................... 29 WiFi ............................................................................................................................................. 31 Firewall ........................................................................................................................................ 31 7 Log Management ................................................................................................................................. 33 Call .............................................................................................................................................. 33 Alarm ........................................................................................................................................... 33 Unlock ......................................................................................................................................... 33 Log .............................................................................................................................................. 34 Cybersecurity Recommendations ................................................................................... 35 1 Initializing the VTO For first-time login or after resetting the VTO, you need to initialize it on the web. Power on the VTO. Go to the default IP address (192.168.1.108) of the VTO. Make sure that the IP address of your PC is in the same network segment as the VTO. Device initialization 1 On the Device Init page, enter and confirm the password, and then click Next. The password must consist of 832 non-blank characters and contain at least two types of the following characters: Uppercase, lowercase, numbers, and special characters (excluding ' " ; : &). Set an email address Select the Email checkbox and enter email address for resetting password. This helps you to reset your password when your password is lost or forgotten. Click Next. Initialization successful Click OK to go to the login page. Enter username (admin by default) and password to log in to the web page. Login page 2 2 Login and Resetting Password Login Before login, make sure that the PC is in the same network segment as the VTO. Go to the IP address of the VTO in the browser. For first-time login, enter the default IP (192.168.1.108). If you have multiple VTOs, we recommend changing the default IP address (Network > Basic) to avoid conflict. Enter "admin" as username and the password you set during initialization, and then click Login. Login Resetting Password On the login interface, click Forgot Password?, and then click Next. Reset the password Scan the QR code, and then you will get a string of numbers and letters. Send the string to the email: support_gpwd@htmicrochip.com, and then the security code will be sent to the email address configured during initialization. Enter the security code in the input box, and then click Next. 3 If you did not set an email address during initialization, contact your supplier or customer service for help. The security code will be valid only for 24 hours upon receipt. If you enter the wrong security code for 5 consecutive times, your account will be locked for 5 minutes. Enter and confirm the new password, and then click OK. 4 3 Home Page Home Page No. Function Description Table 3-1 Home page introduction

: Change the password and your email address.

: Go to the home page.

: Log out, restart the VTO or restore the VTO to factory 1 General function settings. 2 3 4 VTO information System information Configuration manager 5 Function If you restore the VTO to factory settings, all data except external storage will be deleted. You can format the SD card to delete the data in it. View the information of the VTO and the system. Export or import VTO configuration or user information. Configure parameters for different functions. Slight difference might be found in the web page and function in different models. 5 4 Local Settings This chapter introduces the detailed configuration of the VTO. Slight differences might be found in different models. Basic Device Properties & Events Select Local Settings > Basic. Configure the parameters. Basic Parameter Device Type Center Call No. Device Name Calling Center Period No. Table 4-1 Basic parameter description Description Select Villa Station or Small Apartment as needed. The default phone number for the management center is 888888, and you can set it to any number with up to 9 digits. When other devices are monitoring this VTO, the device name will appear on the monitoring image. Time period in which the management center can be called. Configure the time and enable the function so that you will receive calls only in that perioed. Used to differentiate each VTO, and we recommend you set it according to unit or building number, and then you can add VTOs to the SIP server by using their numbers. Villa Call No. Used to call VTHs. 6 Parameter Description The number cannot be changed when the VTO serves as the SIP server. Periods in which Calls can be Made Configure the time if you only want to receive calls from VTH during a specific period. Enable it on the VTO that works as the SIP server, and when a main VTH receives a call, all extension VTHs will also receive the call. SD card by default. SD Used Capacity Displays the total and used capacity of the SD card. You can click Format to delete all the data in the SD card. When the door is unlocked, the VTO will take two snapshots and save them to the SD card. Take a snapshot and save it in the SD card of the VTO when the VTO is calling. When enabled:

If an SD card is inserted in both the VTH and VTO, the video message will be saved both in the SD cards of the VTH and the VTO. If an SD card is only inserted in the VTH or the VTO, the video message will be saved only in the SD card of the VTH or the VTO. If no SD card is inserted in the VTH or VTO, no video message will be saved. Group Call Storage Point Total SD Card Capacity Format Auto Capture

(Unlock) Auto Capture

(Calling) Upload Video Messages Auto Recording

(Call) Take recording when the VTO is in a call, and save the recording in the SD card of the VTO. Click Save. Faade Layout Only the VTO model that with multiple buttons has this web function. Log in to the VTO web page. Select Local Settings > Basic. In the Faade Layout section, select Count types. Count 1: Can only bind one room number. Count 2: Can bind two room numbers. Count 4: Can bind four room numbers. 7 Count Click on the white module, and select the room number from the Room List you want to bind. White module Room list 8 Click Save to save the selected room number. Click Confirm to save all the settings. Confirm Video & Audio Configure the video format and quality, and audio of the VTO. Select Local Settings > Video & Audio. Video Audio 9 Configure the parameters, which will take effect upon change. Parameter Table 4-2 Video parameter description Description Select different resolution as needed:

Video Format 720P: 1280 720. WVGA: 800 480. D1: 720 480. CIF: 352 288. Main Stream Frame Rate The range is 1 to 25. The larger the value, the smoother the video, but it requires more bandwidth. Bitrate Rate Include 768 Kbps, 896 Kbps, 1024 Kbps, 1.25 Mbps, 1.5 Mbps, 1.75 Mbps, 2Mbps and 4 Mbps. The larger the value, the better the video quality, but it requires more bandwidth. Compression H.264. H.265. Video Format Sub Stream Frame Rate Bitrate Rate Compression Scene Mode Compensation Mode Status Select different resolution as needed:

1080P: 1920 1080. WVGA: 800 480. QVGA: 320 240. D1: 720 480. CIF: 352 288. The range is 1 to 25. The larger the value, the smoother the video, but it requires more bandwidth. Include 224 Kbps, 256 Kbps, 320 Kbps, 384 Kbps, 448 Kbps, 512 Kbps, 640 Kbps, 768 Kbps. The larger the value, the better the video quality, but it requires more bandwidth. H.264. H.265. Select from Auto, Disabled, Sunny and Night. Auto is selected by default. BLC: Back light compensation. Improve the clarity of the target in the image. WDR: Wide dynamic range. Enhance the brightness of dark areas, and reduce the brightness of bright areas to improve the image. HLC: High light compensation. Reduce the brightness of the strong spots to improve the overall image. Light Mode Select from NO, NC, Auto and Scheduled. Auto is selected by default. Select PAL or NTSC according to your area. Video Standard PAL is mostly used in China and Europe, and NTSC primarily in the United States and Japan. Brightness The larger the value, the brighter the image. Image Contrast Larger value for more contrast between bright and dark areas. Hue Make the color brighter or darker. The default value is made by 10 Parameter Description the light sensor, and we recommend keeping it default. Saturation The larger the value, the thicker the color. Gamma Changes the picture brightness and improves the picture dynamic range in a non-linear way. The larger the value, the brighter the image. Gain Adjustment Amplify the video signal to increase image brightness. If the value is too large, there will be more noise in the image. Mirror Flip Display the image with left and right side reversed. Display the image upside down. Display Time Display the current time and date on the video image. Turn on or off each type of sound. Voice Prompt Sound Ringback Sound Alarm Leave Messages Unlock Audio Collection Microphone Volume Speaker Volume Audio Control Volume Control Adjust the volume as needed. Access Control Settings This section introduces how to configure the two locks connected to the lock port or the RS-485 port of the VTO. 4.3.1 Local Select Local Settings > Access Control Settings. 11 Local 12 Configure the parameters. Table 4-3 Local access control parameter description Parameter Unlock Responding Interval Description The door can only be unlocked again after the interval. Unlock Period The time during which the lock stays unlocked. Check Door Signal Before Lock Select On or Off as needed. If the door is unlocked longer than the Door Sensor Check Duration, the door sensor alarm will be triggered, and the alarm will be sent to the management center. You need to install a door contact to configure this parameter. You can connect a third-party phone, such as a SIP phone, to the VTO, and use the command to open the door remotely. NC: Normally closed. NO: Normally open. Synchronize door sensor status to indoor monitors (VTHs). Local: local lock. Second lock: 485 lock. Select the Lock type to unlock the lock you select. Door Sensor Check Duration First Unlock Command Door Contact Type Door Sensor Enable Lock Click Save. 4.3.2 RS-485 Select Local Settings > Access Control Settings, and then configure the parameters of the lock connected through the RS-485 port. Lock connected through the RS-485 port Table 4-4 RS-485 description Parameter Interface Type Description Lock by default. Unlock Responding Interval The door can only be unlocked again after the interval. Unlock Period The time during which the lock stays unlocked. You can connect a third-party phone, such as a SIP phone, to the VTO, and use the command to open the door remotely. The default command is 456. Local: local lock. Second lock: 485 lock. Select the Lock type to unlock the lock you select. Second Unlock Command Lock System Configure time parameters, NTP server, and more. Select Local Settings > System. System Configure the parameters. 13 Table 4-5 System parameter description Parameter Date Format Description Select from one of the following:

YYYY-MM-DD MM-DD-YYYY DD-MM-YYYY Select from one of the following:

Time Format 24-Hour 12-Hour System Time Changing system time might cause problems on video searching and information publication. Turn off video recording and auto snapshot before changing it. Configure the time zone as needed. Synchronize the VTO system time with your PC. Daylight saving time. If it is applicable to your area, you need to enable it, and then configure DST type, start time and end time. Select Date or Week as needed, and then configure the specific period. Configure the start time and end time of DST. NTP Enable Enable NTP and enter the IP address of the NTP server, and then the VTO NTP Server will syncronize time with the NTP server automatically. NTP server port number. VTO time update cycle. 30 minutes at most. Define the time when the VTO will restart automatically. Choose from Never, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday and Sunday. You can connect debugging devices to the VTO through SSH protocol. We recommend turning it off, and turn on security mode and outbound service information protection. See "4.5 Security". Otherwise, the VTO might be exposed to security risks and data leakage. Enable it for fault analysis and repair. This function will occupy 8088 and 8087 ports. NTP Enable Enable NTP so that the device time will be automatically synchronized with server. Time Zone Sync with PC DST DST Type Start Time End Time Port Interval Maintenance SSH Emergency Maintenance Click Save. Security 14 Configure functions that involve device security. Select Local Settings > Security. Security Parameter CGI Enable Mobile Push Notification Audio/Video Transmission Encryption ONVIF On Configure the parameters. Table 4-6 Security parameter description Description Enable the use of CGI command. We recommend you turn it off. Otherwise, the VTO might be exposed to security risks and data leakage. Send information to the app on the smartphone. We recommend you turn it off if you do not need this function. Otherwise, the VTO might be exposed to security risks and data leakage. Password Reset If turned off, you will not be able to reset password. Encrypt all data during voice or video call. We recommend you turn it on. Otherwise, the VTO might be exposed to security risks and data leakage. Allow third-party to pull video stream of the VTO through the ONVIF protocol. We recommend turning it off. Otherwise, the VTO might be exposed to security risks and data leakage. Output encrypted bit stream through RTSP. RTSP Over TSL We recommend you turn it on. Otherwise, the VTO might be exposed to security risks and data leakage. 15 Parameter Description Protect your passwords. We recommend you turn it on. Otherwise, the VTO might be exposed to security risks and data leakage. Enable it and the VTO will be found by other devices. We recommend you turn it off. Otherwise, the VTO might be exposed to security risks and data leakage. Security Mode (recommended): Support logging in with Digest authentication. Compatible Mode: Use the old login method. We recommend you use the security mode. Compatible mode might expose the VTO to security risks and data leakage. Select an expiration period as needed. We recommend you do not use never. The VTO might be exposed to security risks and data leakage if you chose that one. Outbound Service Information Protection Multicast/Broadcast Search Authentication Mode Password Expires in Click Save. Onvif User Add accounts for devices to monitor the VTO through the ONVIF protocol. If you delete an account, it cannot be undone. Select Local Settings > Onvif User. Onvif user Click Add. 16 Add an ONVIF user Enter the information, and then click Save. ONVIF devices can now monitor the VTO by using the account. Update Select Local Settings > Update. Select ways to check the update. version. Auto Check: Select the function to check automatically whether there is a new system Manual Check: Select the function to check whether there is a new system version. Update Upload File Upload audio file to change the sound when calling, unlocking the door, and more. Select Local Settings > Upload File. Select an audio type from the drop-down list, and then click Browse to select the audio file as needed. 17 Change the sound prompt Click Upload. Legal Info You can view software license agreement, privacy policy, open source software notice in this section. Legal information 18 5 Household Setting This chapter introduces how to add, modify, and delete VTO, VTH, VTS, and IPC, and how to send messages from the SIP server to VTOs and VTHs when the VTO works as the SIP server. If you are using other servers as the SIP server, see the corresponding manual for details. VTO No. Management You can add VTOs to the SIP server, and all the VTOs connected to the same SIP server can call each other. Log in to the web page of the VTO that works as the SIP server. Select Household Setting > VTO No. Management. VTO management Click Add. Add VTO Configure the parameters. 19 The SIP server must be added. Table 5-1 Add VTO configuration Description The VTO number you configured. Leave it as default. Parameter No. Registeration Password Build No. Unit No. IP Address Username Password Click Save. Available only when the platform servers work as the SIP server. IP address of the VTO. Username and password used to log in to the web page of the VTO. Click or to modify or delete a VTO, or Clear to delete all added VTOs, but the one that you have logged in to cannot be modified or deleted. VTH Management You can add room numbers to the SIP server, and then configure the room number on the VTHs to connect them to the network. Log in to the web page of the SIP server. Select Household Setting > VTH Management. Room number management Click Add. 20 Add a room number Configure the parameters. Table 5-2 Room information Description Enter the information you need to differentiate each room. Enter a room number, and then configure the number on a VTH to connect to connect it to the network. Parameter First Name Last Name Nick Name Room No. Registeration Type Registeration Password Click Save. Select public. Leave it as default. Click or to modify or delete a room number. Personnel Management Adding personnel information. Card issuing Issue an access card to unlock the door of a room. To use this function, the VTO must have a card reader. Log in to the web page of the VTO. Select Household Setting > Personnel Management. 21 Personnel management Click Add. Add personnel information Enter the parameters, and then click Save. The personnel information displays on the web page. For some VTO models, the QR code is embedded in the Personnel Management page. Yet for some models, you need to go to Network > Basic > Cloud Service to check the QR code. Operation succeed Select to go to the card issuing window. 22 Card issuing window Click Issue Card to issue cards. The web page displays the countdown prompt (120 s). Once the countdown starts, you need to swipe the card on the card reader of the VTO within this time period. After the swiping, the card number will be automatically recognized by the VTO. Countdown in process Click Confirm Send Card after swiping to complete the issuing process. 23 Other Operations Click to set it to loss, and then the icon changes to

. The lost card cannot be used to open the door. Click or to modify the username or delete the card. VTS Management You can add a VTS to the SIP server, and then it can be used as the management center. It can also manage, call, or receive calls from all the VTOs and VTHs in the network. See the corresponding user's manual for details. Log in to the web page of the VTO that works as the SIP server. Select Household Setting > VTS Settings. VTS management Click Add. Add VTS Configure the parameters. 24 Table 5-3 Add VTS configuration Parameter VTS No. Registeration Password Description The number of the VTS. Leave as default. IP Address VTS IP address. Click Save. Status You can view the online status and IP addresses of all the connected devices. Log in to the web home page of the SIP server, and then select Household Setting > Status. Status 25 6 Network This chapter introduces how to configure the network parameters. Basic 6.1.1 TCP/IP Wireless LAN LAN Log into the VTO web page. Select Network > Basic. Configure the TCP/IP parameters in the WLAN section. Log into the VTO web page. Select Network > Basic. Configure the TCP/IP parameters in the LAN section. Network configuration You need to configure the TCP/IP information to connect the VTO to the network. The descriptions below are for models with a Wireless LAN card. A Wireless LAN device is optional. Table 6-1 Parameter description Parameter Description IP Address Your planned IP address for the VTO. Preferred DNS The default is 8.8.8.8. Alternate DNS The default is 8.8.4.4. Transmission Mode Mode 1: Multicast streaming (UDP). Mode 2: RTSP streaming (TCP). It is transmission Mode 1 by default. DHCP Enable the function to get the allocated IP address for the VTO. 6.1.2 Port 26 Port Parameter Description Table 6-2 Parameter description Port 80 by default. If already used, choose any number from 1025 to 65535 as needed. You can enter http://VTO IP address: Port to log in to the VTO. HTTPS Port Enable it and click Save. You can now enter https://VTO IP address:

HTTPS Port to log in to the VTO. TCP/UDP Port Used for accessing the VTO with devices in other networks. See "6.2 UPnP" for details. The unique digital identification of VTO for the SSL protocol. For first time use or after changing the IP address of the VTO, you need to go through this process. Create Server Certificate Download Root CERT If you delete the certificate that has been created, it cannot be undone. If you are using a PC that has never logged in to the VTO, you need to download the root certificate, double-click to install it, and then you can use the HTTPS function mentioned above. If you delete the certificate that has been installed, it cannot be undone. 6.1.3 Cloud service Cloud service Enable the Cloud Service function, and then you can scan the QR code with your phone to add the VTO to the app on your smartphone. 27 For some VTO models, the QR code is embedded in the Cloud Service module. Yet for some models, you need to go to Household Setting > Personnel Management to check the QR code. UPnP When the VTO works as the SIP server, you can configure the UPnP function to allow WAN devices to log in to the VTO. UPnP Preparation Enable the UPnP function on the router, and then configure a WAN IP address for the router. Connect the VTO to the LAN port of the router. 6.2.2 Enabling UPnP Services Select Network > UPnP. Enable the services listed as needed. Select Enable. Click Save. 6.2.3 Adding UPnP Services Select Network > UPnP. Click Add. Configure the parameters as needed. 28 Add a UPnP service Table 6-3 Parameter description Parameter Description Service Name Service Type Enter the information as needed. Protocol Select TCP or UDP as needed. Internal Port Use port number from 1024 through 5000. Do not use port number 11023 to avoid conflict. External Port If you need to configure this function for multiple devices, make sure that the ports are not the same. The port number you use must not be occupied. The internal and external port number must be the same. SIP Server There must be a SIP server in the network for all connected VTOs and VTHs to call each other. You can use a VTO or other servers as the SIP server. Select Network > SIP Server. Select a server type as needed. The VTO you have logged in as the SIP server:

Enable SIP Server, and click Save. You can add VTOs and VTHs to this VTO. See the details in "5 Household Setting". If the VTO you have logged in does not work as the SIP server, do not enable SIP Server; otherwise the connection will fail. If another VTO works as the SIP server:

Do not enable SIP server. Set Server Type to VTO, configure the parameters, and then click Save. 29 VTO as the SIP server Table 6-4 SIP server configuration (VTO as the SIP server) Description Your planned IP address of the VTO. 5060 by default when a VTO works as the SIP server. Leave it as default. SIP Domain Leave it as default. Parameter IP Addr. Port Username Password SIP Server Username SIP Server Password Username and password used to log into the web page of the SIP server. If the platform works as the SIP server:

Set Server Type as DSS Express/DSS Pro, and configure the parameters, and then enable the SIP Server. Platform as the SIP server Table 6-5 SIP server description (platform as the SIP server) Parameter IP Addr. Port Description SIP server IP address. 5080 by default when the platform works as the SIP server. Username/Password Leave it as default. SIP Domain Leave it as default or null when the platform works as the SIP 30 Description server. Parameter SIP Server Username/

Password Alternate IP Addr. Used to log in to the SIP server. The alternate server will be used as the SIP server when Express/DSS stops responding. We recommend you configure the alternate IP address. If you enable Alternate Server, the current VTO you have logged in serves as the alternate server. If you want another VTO serve as the alternate server, you need to enter the IP address of that VTO in the Alternate IP Addr. textbox. Do not enable Alternate Server in this case. Alternate Username/

Password Used to log in to alternate server. Alternate VTS IP Addr. IP address of the alternate VTS. Alternate Server Enable it as needed. Wi-Fi If the VTO supports Wi-Fi function, then configure the parameters here. Wi-Fi Select Network > WiFi. Set the WiFi status to be on. Select a region, and all the networks available in this region are displayed. Click to connect to the network that you chose. Firewall You can enable different firewall types to control network access to the VTO. Select Network > Firewall. 31 Select Type, and then enable it. Configure the parameters. Click Confirm. Table 6-6 Firewall type description Type Network Access Description Select either Allowlist or Blocklist, and then add an IP address or segment which is allowed or denied to access the VTO. PING Prohibited The VTO will not response to ping to avoid ping attacks. Anti-semijoin Protects the VTO performance by blocking excessive SYN packets. Mode Allowlist: Devices that have been granted an access. Blocklist: Devices that have been forbidden an access. Firewall 32 7 Log Management Select Search Log. You can search for different logs, and export them to your PC as needed. If storage is full, the oldest records will be overwritten. Back up the records as needed. Call Alarm Unlock Call Alarm 33 Log Select time range and type, and then you can see all the log information. Log Unlock 34 Cybersecurity Recommendations Mandatory actions to be taken for basic device network security:

1. Use Strong Passwords Please refer to the following suggestions to set passwords:

The length should not be less than 8 characters;

Include at least two types of characters; character types include upper and lower case letters, numbers and symbols;

Do not contain the account name or the account name in reverse order;

Do not use continuous characters, such as 123, abc, etc.;

Do not use overlapped characters, such as 111, aaa, etc.;

2. Update Firmware and Client Software in Time According to the standard procedure in Tech-industry, we recommend to keep your device (such as NVR, DVR, IP camera, etc.) firmware up-to-date to ensure the system is equipped with the latest security patches and fixes. When the device is connected to the public network, we recommend enabling the "auto-check for updates" function to obtain timely information of firmware updates released by the manufacturer. We suggest that you download and use the latest version of client software.

"Nice to have" recommendations to improve your device network security:

1. Physical Protection We suggest that you perform physical protection to device, especially storage devices. For example, place the device in a special computer room and cabinet, and implement well-done access control permission and key management to prevent unauthorized personnel from carrying out physical contacts such as damaging hardware, unauthorized connection of removable device (such as USB flash disk, serial port), etc. 2. Change Passwords Regularly We suggest that you change passwords regularly to reduce the risk of being guessed or cracked. 3. Set and Update Passwords Reset Information Timely The device supports password reset function. Please set up related information for password reset in time, including the end users mailbox and password protection questions. If the information changes, please modify it in time. When setting password protection questions, it is suggested not to use those that can be easily guessed. 4. Enable Account Lock The account lock feature is enabled by default, and we recommend you to keep it on to guarantee the account security. If an attacker attempts to log in with the wrong password several times, the corresponding account and the source IP address will be locked. 5. Change Default HTTP and Other Service Ports We suggest you to change default HTTP and other service ports into any set of numbers between 1024~65535, reducing the risk of outsiders being able to guess which ports you are using. 6. Enable HTTPS 7. MAC Address Binding We suggest you to enable HTTPS, so that you visit Web service through a secure communication channel. 35 We recommend you to bind the IP and MAC address of the gateway to the device, thus reducing the risk of ARP spoofing. 8. Assign Accounts and Privileges Reasonably According to business and management requirements, reasonably add users and assign a minimum set of permissions to them. 9. Disable Unnecessary Services and Choose Secure Modes If not needed, we recommend turning off some services such as SNMP, SMTP, UPnP, etc., to reduce risks. If necessary, it is highly recommended that you use safe modes, including but not limited to the following services:

SNMP: Choose SNMP v3, and set up strong encryption passwords and authentication passwords. SMTP: Choose TLS to access mailbox server. FTP: Choose SFTP, and set up strong passwords. AP hotspot: Choose WPA2-PSK encryption mode, and set up strong passwords. 10. Audio and Video Encrypted Transmission If your audio and video data contents are very important or sensitive, we recommend that you use encrypted transmission function, to reduce the risk of audio and video data being stolen during transmission. Reminder: encrypted transmission will cause some loss in transmission efficiency. 11. Secure Auditing Check online users: we suggest that you check online users regularly to see if the device is logged in without authorization. Check device log: By viewing the logs, you can know the IP addresses that were used to log in to your devices and their key operations. 12. Network Log Due to the limited storage capacity of the device, the stored log is limited. If you need to save the log for a long time, it is recommended that you enable the network log function to ensure that the critical logs are synchronized to the network log server for tracing. 13. Construct a Safe Network Environment In order to better ensure the safety of device and reduce potential cyber risks, we recommend:

Disable the port mapping function of the router to avoid direct access to the intranet devices from external network. The network should be partitioned and isolated according to the actual network needs. If there are no communication requirements between two sub networks, it is suggested to use VLAN, network GAP and other technologies to partition the network, so as to achieve the network isolation effect. Establish the 802.1x access authentication system to reduce the risk of unauthorized Enable IP/MAC address filtering function to limit the range of hosts allowed to access access to private networks. the device. 36

1.2.51.32.16489-001--Class B -&RF- :70*105mm, 80g2010812~

1.2.51.32.16489-001 V1.1.0 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16

Wi-Fi Villa Door Station ahua DHI-VTOO301R-W Teomenoer 12-33VE5 14 PIN: 1.0.01.15.11968 2M0024EPAG12619 rec ID: SVN-0301R-W MADE IN CHINA (

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Zhejiang Dahua Vision Technology Co., Ltd. Address: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Confirmation Letter We, Zhejiang Dahua Vision Technology Co., Ltd. The product: Wi-Fi Villa Door Station FCC ID: SVN-0301R-W And model No.: DHI-VTO0301R-W, VTO0301R-W Only the main model DHI-VTO0301R-W was tested and only the data of this model is shown in this test report. Since Their material, types of encloser, antenna location, electrical circuit design, layout, components used and internal wiring are identical, only the model name is different and the user cant change the RF parameters or others access the software setting.

(Signature) ___________ Company Name: Zhejiang Dahua Vision Technology Co., Ltd. Contact Name: Yolanda chen Title of Person: Certificate Manager Address: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China

Zhejiang Dahua Vision Technology Co., Ltd. Date: 2022/01/04 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:

I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to:

a) comply with the relevant provisions of the certification program;

b) c) d) e) f) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

use certification only to indicate the products are certified as being in conformity with specified standards;

g) h) i) j) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by:

Company Name: Zhejiang Dahua Vision Technology Co., Ltd. Contact Name: Yolanda chen Title of Person: Certificate Manager Address: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China

Zhejiang Dahua Vision Technology Co., Ltd. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject:

Request for Confidentiality FCC ID:

SVN-0301R-W To Whom It May Concern:

Schematic Diagram Block Diagram Theory of Operation Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: Zhejiang Dahua Vision Technology Co., Ltd. Contact Name: Yolanda chen Title of Person: Certificate Manager Address: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Date: 2022/01/04