FCC ID: 2A839-PE5215 Button Transmitter

PE 5200 Series Button Transmitter Instruction

Product introduction LED Indicator Light UP Button STOP Button DOWN Button Channel-

Screen UP Button STOP Button DOWN Button Channel+

Single Channel

(Tubular Motor) Multi Channel

(Tubular Motor) Pairing Button Insert the tips into the hole to enter the learning state LED Indicator Light OPEN Button STOP Button CLOSE Button Channel-

Screen OPEN Button STOP Button CLOSE Button Channel+

Single Channel

(Curtain Motor) Technical data Multi Channel

(Curtain Motor) Mounting Bracket Power Supply CR2430 Working Temperature -20~+60 Frequency 433.92MHz Effective Radiated Power -10.4 dBm Working Current 20mA Standby Current 1uA Operating Distance 100m Power Supply CR2430 Working Temperature -20~+60 Frequency 433.92MHz Effective Radiated Power -10.4 dBm Working Current 20mA Standby Current 1uA Operating Distance 80m Multi Channel Single Channel Maximum channel latch Use the "+" or "-" channel button to select the maximum channel

(except the teamwork channel00). Hold down the "+" and "-" channel buttons at the same time, the screen will start flashing the current channel until 'AA' is displayed. The screen displays "AA" as successful Release the maximum channel latch Except for the teamwork channel 00,hold down the +

and - channel buttons. The display starts flashing the current channel and let go until 15 is displayed When "15" is displayed, the operation succeeds. 01 Battery replacement Loosen the rear cover screws, and slide down to open the battery compartment. Remove the old batteries and properly dispose of the used ones. Place the battery right side up in the battery compartment After sliding into the back cover, tighten the screws. Warning 1. Keep the transmitter away from moisture and impact to extend the service life. 2. If it is found that transmitter needs to be closely controlled or the button is not too sensitive and the indicator light blinks and darkens,the battery needs to be replaced. 3. Press any button for more than 10 seconds, the transmitter will stop sending wireless signals. 4. Please dispose of used batteries properly. 5. The 00 channel can control all channels,and the code matching function cannot be realized when using this channel. FCC Warning Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may causeb undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Simplified EU Declaration Of Conformity The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows:

Hereby, Zhejiang General Light Curtain Co., Ltd declares that the radio equipment type Button Transmitter is icompliance wih Drective 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

https://www.poyaltech.com/eu-declaration-of-conformity Importer Company Name: XXXXXX Importer Company Address: XXXXXXXXXX Manufacturer Company Name: Zhejiang General Light Curtain Co.,LTD. Manufacturer Company Address: Xin Tang Tou Village, Xin Jie Town, Xiao Shan District, Hang Zhou City, Zhe Jiang Province, China 02

Zhejiang General Light Curtain Co.,LTD. Date: November 22, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION FCC ID:2A839-PE5215 To Whom It May Concern:

We, the undersigned, hereby authorize Shenzhen Huaxia Testing Technology Co., Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Guo les Name:Guo Lei Title:PM

Zhejiang General Light Curtain Co.,LTD. Date: November 22, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID:2A839-PE5215 Zhejiang General Light Curtain Co.,LTD. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Applicant signature: Gue le Applicant printed name: Guo Lei Zhejiang General Light Curtain Co.,LTD. Date: November 22, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC 1ID:2A839-PE5215 Zhejiang General Light Curtain Co.,LTD. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Applicant signature: Guo Le Applicant printed name: Guo Lei

Zhejiang General Light Curtain Co.,LTD. Date: November 22, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST Product :Button Transmitter Model NO.:PE5215 FCC ID:2A839-PE5215 To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Schematic Diagram,Block Diagram,Operational Description) required to be submitted with this application be permanently withheld from public review. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Guo le Name:Guo Lei Title:PM

Axiom International, Inc. U.S. Agent Designation for Service of Process -

Certification Attestation Letter 11/01/2024 ATTN.: Reviewing Engineer FCC ID: 2A839-PE5215 Per section 2.911(d)(7) of the FCC rules, Zhejiang General Light Curtain Co.,LTD. (the applicant) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process:

Company Name: Axiom International, Inc. Physical U.S. Company Address: 5522 Mainsail Way Gainesville. GA 30504 Agent contact name/Title : Jeff Volante/ President Agent Email Address: [email protected] Tel No.: 678-517-1325 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Agent Signed (if.different to Applicant):

f { 4 Guo Le Let Le we Signed: ~ Signed: |

Printed name: Guo Lei : Printed name: Jeff Volante Title: Manager Title: President Company Name: Zhejiang General Light Curtain Co.,LTD. Company Name: Axiom International, Inc. Date: 11/01/2024 Date: 11/01/2024

* the applicant must designate a contact located in the United States for purposes of acting as the applicant's agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.