Bluetooth speaker User Manual Model: ZN-803 Bluetooth Instruction(Note: The Bluetooth code is B86, pair code: 0000) 1. Long press "
" for 2seconds to power on, hear prompt sound Bluetooth, the blue LED light flash quickly. 2. It is in Bluetooth pairing mode. 3. On your portable device, turn Bluetooth on, search for Bluetooth devices 4. Select B86 and you will hear prompt sound Bluetooth Connected, the blue LED light keeps on. 5. It is ready for use. 6. Long press +/- to increase/decrease volume Short press+/- to next/previous song Short press"
" to play/pause 7. Long press "
" for 2seconds to power off Remark: 1. If there is no operation within 15 minutes, the Bluetooth speaker will power off automatically. 2. The Bluetooth device will be connected automatically if it has been paired before. 3. If the Bluetooth range over than10meters or disconnected by phone, there is prompt sound disconnected and the blue LED light flash quickly. Hands free function Short press " to answer or end an incoming call Long press " to refuse an incoming call Twice press " to redial the last phone number outgoing call. Short press " to cancel redialing the last phone number outgoing call. Remark: The blue LED light flash slowly during Hands free function. Charging the Battery Before first use, please charge the Bluetooth speaker. Plug the provided USB charging cable into the speaker and a powered USB port. While charging, the LED light is red. Once fully charged, it will turn off. Charging time: 1.5hours Remark: 1. The Bluetooth speaker can be used during charging. 2. There is an alarm low battery, please charge every 30s if low battery. Specifications:
Speaker: D40mm (130HZ-20KHZ) Power output: 2W 3 SNR: 905dB Bluetooth version: 4.2 Built-in battery: 500mAh Play time: 3.5hours Material: ABS+silicon Size: 80*73*63.8mm NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.