QUICK GUIDE OF SMART CONNECTION TO APP 1. Download Smart Life App Scan the QR right code to download the Smart Life app. 2. Register a Smart life account and sign in the app Open the Smart Life app, tap "Register to register an account, then sign in the app.picture 1 1 3. Add device and create connection. Make your router, cellphone, and device are as close as possible. Before connecting, enable bluetooth of cellphone. Turn on the bulb 3 times(on-off-on-off-on), confirm light bulb is flickering rapidly. (2 times per second). Sign in the Smart Life account, The device will be found by app automatically. Add the device, Select 2.4GHz Wi-Fi network and enter password. Start connecting, Add successfully. Follow picture 2-6 to create the connection of device. After connection is finished, the device can be check in the home page of the app. 3 2 4 6 5 The connection can be also created by auto scan. In this way, please select lighting-lighting source (BLE+Wi-Fi), then operate according to the app instructions. 4 . Control the bulb You can control the brightness in Dimmer model. Change scene in scene mode. 7 5 The specs 60W equivalent10W)LED White light 800 Lumens (6500K) 15,000 hour life WiFi: IEEE 802.11N, 2.4GHz 110-130V AC60Hz Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
Increase the separation between the equipment and receiver. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. RF Exposure: A distance of 20cm shall be maintained between the antenna and users, and the transmitter module may not be co-located with any other transmitter or antenna. Non-modification Statement Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. NOT FOR EMERGENCY LIGHTING ONLY USE THE CONTROL PROVIDED WITH OR SPECIFIED BY THESE INSTRUCTIONS TO CONTROLTHIS LAMP.THIS LAMP WILL NOT OPERATE PROPERLY WHEN CONNECTED TO ASTANDARD (INCANDESCENT)DIMMER OR DIMMING CONTROL.