FCC ID: 2AY5GMK02001100 Smart Light Blub

165*170mm 105g Unfolded size 165*170mm 105g coated paper, double-sided printing, fold broadwise, and then letter fold MKOPTO Smart Light Bulb White LED Light USER MANUAL Get to Know Your Smart Bulb TM A smart light bulb is easily dim or brighten, change color, turn on or off via remote control with onn. Smart Home app. No hub needed. It is also available to be controlled by voice and be compatible with Google/Alexa/Siri to build your smart home. Add Your Device Create Connection 02 03 But Wait....Theres More Way one Add manually Way two Auto scan Follow the pictures to create connection for the bulb You can control the brightness in Dimmer model and choose different scene in scene mode. The Specs White LED Light Size: 60x117mm(2*4in 15,000 hour life WiFi:IEEE 802 11 N, 2.4GHz Model: MK-020011009287 120V~ 60Hz 0.13A,12W 1100Lumens, 2700-6500K FCC ID: 2AY5GMK02001100 Tap + to add 5 1 02 Lets Get Started Heres what youll need to get set up Register Your Account 01 Add Your Device The Fine Print The Fine Print The Fine Print E26 socket Scan the QR code below to download the Smart Home app or download the it from APP Store or Google Play. Make your router, cellphone, and device are as close as possible. Before connecting, enable bluetooth of cellphone. Open the Smart Life app, tap "Register" to register an account, then sign in the app. Add the device, as the following picture shows. Make sure you're connecting to a 2.4GHz Wi-Fi network. (lt can't connect to 5GHz networks) Turn on the bulb 3 times(on-off-on-off-on), confirm light bulb is flickering rapidly. (2 times per second). Note: if network configuration takes more than 8 minutes or fails. Reset the bulb(turn on the bulb 3 times again as mentioned above). There are two ways to connect with the bulb, one is Add manually, the other is Auto scan

-Stable Wi-Fi network which could access to the device.

-A smart phone is running iOS 8 or higher or Android 4.1 or higher.

-Install the bulb in an E26 socket TM Federal Communication Commission Interference Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. RF Exposure: A distance of 20cm shall be maintained between the antenna and users, and the transmitter module may not be co-located with any other transmitter or antenna. Non-modification Statement:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION RISK OF ELECTRIC SHOCK - DO NOT USE WHERE DIRECTLY EXPOSED TO WATER NOT FOR EMERGENCY LIGHTING ONLY USE THE CONTROL PROVIDED WITH OR SPECIFIED BY THESE INSTRUCTIONS TO CONTROLTHIS LAMP.THIS LAMP WILL NOT OPERATE PROPERLY WHEN CONNECTED TO ASTANDARD(INCANDESCENT)DIMMER OR DIMMING CONTROL. Need help?

We're here for you every day from 7 a.m.- 9 p.m. CST. Give us a call at 1-888-516-2630 2 3 4 8 7 10 6 9

MKOPTO Smart Light Blub Model: MK-020011009285 120V~ 60Hz 0.12A,10W 800Lumens, 2700-6500K, C US FCC ID: 2AYSGMK02001100 LISTED CAUTION: FoR DAMP LOCATIONS. MADE IN CHINA DO NOT USE WITH STANDARD DIMMERS.

MKOPTO

; Model: MK-020011009287 120V~ 60Hz Marking 0.13A,12W 1100Lumens, 2700-6500K, cUt)us

: FCC ID: 2AY5GMK02001100 USTED Date: XX/XX 465666 CAUTION: For DAMP LOCATIONS. DO NOT USE WITH STANDARD DIMMERS.

Zhejiang MEKA Electric Co.,Ltd 12/17/2021 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: 2AY5GMK02001100 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commissions Rules and FCC Guidance document 726920, we hereby request confidential treatment of information accompanying this application as outlined below:

PERMANENT LONG-TERM CONFIDENTIALITY:

Circuit Diagram Block Diagrams Operation Description The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely,

The Difference between Series Model We declare that the difference between the original model (Product NameSmart Light Blub Model Number : MK-020011009287)and the series model (ModelNumber:MK-020011009285,100074055,100074057,MK-020011009286,MK-020011009288, MK-020011009289,) is Only the model name is different, the others are the same. Zhejiang MEKA Electric Co.,Ltd Name: Date: November 30, 2021

2021.11.30 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shanghai ATBL Technology Co., Ltd. / 5-6/F., Unit 1, No 8, Free Trade One Life Science and Sci-Tech Industrial Park, No. 160, Basheng Road, Pudong New District,Shanghai City, China/Terry Yang(Name of Agent company name and address, Name of Agent) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. Name: Terry Yang Title: PM E-mail:terry.yang@atbl-lab.com This appointment is valid until further until December 31, 2022 Sincerely, Name: Anson Bao Title: project manager E-mail: anson@idealbright.com Company: Zhejiang MEKA Electric Co.,Ltd Signature: