79.3 22.3 59.1 36.8g0.5g or maintaining this unit correctly this unit,please and with care.Failure read these instructions paying extra attention to do so may cause damage and/or personal carefully to the safety injury and operating the warranty. and precautions.Use IMPORTANT:Before warnings will invalidate D Loosening the tire Remove the valve cap and core and deflate Use the bead loosener
.A CAUTION:
must The bead loosener be facing the valve. to unseat the tire bead . the tire. the tire fl Dismounting Clamp the tire onto thetire valve at 1 o'clock relative Insert head to dismount mounting changer,and to the tire separatior:Lbead. the tire tool and lift the tire bead onto th, the bead. adjust the
'
'
A CAUTION:
This starting position must be observed during the whole dismounting process. Dismounting With a screwdriver from the valve stem.Then valve. remove the fastening screw and sensor loosen the nut and remove the Mounting sensor and valve the screw-nut m Slide the valve stem through Tighten positioning pin.Assemble by screw.Hold screw. Step.1 Step.2 the valve hole of the rim. with 4.0 Nm with the help of the the sensor and valve stem together the sensor body against the rim and tighten the Mounting the tire Place the tire on the rim,making faces the separation Mount the tire over the rim. head at an angle of 180 . sure that the valve Step.3 Step.4 not expressly approved by the party respon sible for compliance could void the users authority to h Part 15 of the FCC Rules. Operation is subje cause harmful interference, and cept any interference received, including in terference that may cause unde ct to the following t wo conditions:
sired operation. t has been tested an limits are designed to d found to comply with t provide reasonable pro he limits for a Class B di gital device, purs uant to Part 15 of a residential radio frequency energy, and if not installed and ful interference in tection against harm s, and can radiate uipment generates, use instructions, may c occur in a particula ause harmful interference to r r installation. If e determined by turning th e equipment off and on, adio communicatio ns. However, there is used in no guarantee that the user is encoura ged to try to correct the interference this equipment does cause harmful interferenc e to radio or televisio n FCC Requirement changes or modifications operate the equipment. This device complies wit
(1) this device may not
(2) this device must ac Note: This equipmen the FCC Rules. These installation. This eq accordance with the interference will not reception, which can b by one or more of t Reorient or reloc enna. Increase the Connect the equip Consult the dea he following measures:
ate the receiving ant separation between t he equipment and receiver
. ment into an outlet on a c from that to which the re ceiver is connected. ler or an experienced ra help. ircuit different dio/TV technician for This equipment complies environment. This equip between the radiator & your body. Thi conjunction with any with FCC radiation ex ment should be installed other antenna or tr ansmitter. posure limits set forth for an uncontrolled and operated with a mini mum distance of 20cm s transmitter must not be co-located or opera ting in mation:
Manufacturer infor Zhejiang PDW Industrial Co., Ltd. Quanxi Industri Importer informati City Pro car d.o.o. Surcinska 5b, Belgrade, Serbia County, Jinhu al Park, Wuyi on:
a City, Zhejiang, P
.R.China 321200