Model Name Function Input Rating Standards Bluetooth Version Standards User Guide YK-Smart-H001 Intelligent gateway On/O/Bluetooth control 120V, 60Hz, 1.5W, CLASS II WIFI 802.11 b/g/n BLE4.2 BLE 802.15.1 1.Download the Energetic Lighting App from the APP Store or from Google Play. Create an account and enter into the APP. 2. Turn on the WIFI and Bluetooth on the phone. Tap + in the top-right corner of the app and then select search device. 3. Power on the hub, and the LAN light starts to blink. 4. The hub will be detected and appear in the app. Tap on the icon, enter WIFI name and password, tap conrm and wait until it is added successfully..
(Only works with 2.4GHz WIFI networks. Not compatible with 5GHz WIFI networks.) Modle Nom Fonctions YK-Smart-H001 Passerelle intelligente Allumer/teindre/Contrle bluetooth Tension d'entre nominale 120 V, 60 Hz, 1.5 W, CLASSE II Normes WIFI 802.11 b/g/n Version de Bluetooth BLE4.2 Normes BLE 802.15.1 Guide d'utilisation 1.Tlchargez l'application Energetic Lighting App partir de l'APP Store ou Google Play. Crez un compte et accdez l'APP. 2. Allumez le WIFI et le Bluetooth sur le tlphone. Tapez sur + dans le coin suprieur droit de l'application, puis slectionnez recherche d'appareil . 3. Mettez le concentrateur sous tension et le voyant LAN commence clignoter. 4 .Le concentrateur sera dtect et apparatra dans l'application. Tapez sur l'icne, saisissez le nom WIFI et le mot de passe, tapez sur confirmer et attendez qu'il soit ajout avec succs...
(Fonctionne uniquement avec les rseaux WIFI 2,4 GHz. Non compatible avec les rseaux WIFI 5 GHz.) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference.(2) This device must accept any interference, including interference that may cause undesired operation of the devic Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1) Lappareil ne doit pas produire de brouillage;
2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To satisfy FCC&IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation.To ensure compliance, operations at closer than this distance is not recommended. Les antennes installes doivent tre situes de facon ce que la population ne puisse y tre expose une distance de moin de 20 cm. Installer les antennes de facon ce que le personnel ne puisse approcher 20 cm ou moins de la position centrale de l antenne. CAUTION: Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion. ATTENTION:
Lisez toutes les instructions et les avertissements avant d'utiliser ce produit. L'utilisation inapproprie de ce produit peut entraner la dtrioration du produit, l'excs de chaleur, des fumes toxiques, incendie ou une explosion. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS CONSIGNES DE SCURIT IMPORTANTES - Conservez ces instructions DANGER - POUR RDUIRE LES RISQUES D'INCENDIE OU DE CHOC LECTRIQUE, SUIVEZ ATTENTIVEMENT CES INSTRUCTIONS For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed.Pour la connexion une alimentation pas aux Etats-Unis, utilisez un adaptateur de fixation de la configuration correcte pour la prise d'alimentation, si ncessaire. Risk of Electric Shock. RISQUE DE CHOC LECTRIQUE. For indoor use only. POUR UNE UTILISATION EN INTRIEUR. Please check prior use, if output voltage and current of the power supply is suitable for the product. Se il vous plat vrifier avant l'utilisation, si la tension de sortie et le courant de l'alimentation est adapt au produit. For information technology equipment use only. Pour l'utilisation des quipements de technologie d'information seulement. The plug is used as disconnect device. The socket-outlet shall be installed near the equipment and shall be easily accessible. La prise est utilise comme dispositif de dconnexion. La prise de courant doit tre installe prs de l'quipement et doit tre facilement accessible. The cover may under no circumstances be opened. If the cover is damaged, then the power supply may no longer be used. Le couvercle peut en aucun cas tre ouvert. Si le couvercle est endommag, l'alimentation ne peut plus tre utilis. Children should be supervised to ensure that they do not play with the appliance. Les enfants doivent tre surveills pour s'assurer qu'ils ne jouent pas avec l'appareil.