ON/OFF seat Cc Wind temperature Press the wind temperature button to adjust the warm air temperature. When pressing the button for the first time, display the current temperature gear. Press the button again, then it will switch the temperature gear, and then it can be Water temperature Press the water temperature button to adjust the cleaning water temperature. When pressing the button for the first time, display the current temperature gear. Press the button again, then it will switch the temperature gear, and then it can be Seat temperature Press the seat temperature button to adjust the seat temperature. When pressing the button for the first time, display the current temperature gear. Press the button again, then it will switch the temperature gear, and then it can be set Cold / hot massage In the cleaning mode, press the hot and cold massage button to realize alternating hot and cold cleaning of water temperature. 3X this function can only be turned on/off for hot and cold massage during buttocks cleaning and women washing. Flush Press the flush button to flush the produc Strength of cleaning When the cleaning intensity needs to be changed, please press the + button or the forward rotation button, press the "- button or the backward rotation button to Nanometer antibacterial Anti-bacterial materials should be used for seat, upper cover of the whole machine and cleaning nozzle. Stop To stop the function of buttocks cleaning or women washifg, press
" button or short press the Imob button. 2 hip cleaning and womens washing, with automatic stop function after Rear cleaning Press the Rear button. The cleaning water spurts out from the front of the nozzle, cleaning the buttocks in the previous way. Press again Front cleaning Press the Front button. Clean water spurts out from the front end of the nozzle, cleaning womens private places in the past. Press again to close reciprocating cleaning. Warm air drying Press the dryer button. Dry cleaned areas. Nozzle forward Press the nozzle forward button. The nozzle position can be adjust Self-cleaning nozzle Start the nozzle self-cleaning action every time the tube is stretched/returned. Leave the seat flush When setting up the seat, there is no flushing command after cleaning, and the ceramic flushing command will be carried out after 6S leavi1 WARNING FCC Statement This equipment has been tested and found to comply with the limits for a Class B dicital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against hanrfu interference in a residential instalation. This equipment generates uses and can radiate rado frequency energy and, if not installed and used in accordance with the instructions, may cause hamful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be er is encouraged to try to correct the Reorient or relocate the receiving antenna, Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is. connected.
~Consultthe dealer or an experienced radio/TV technician forhelp. This device complies with part 15 of the FOC Rules. Operation is subject to the following two conditions:
(1) This device may not cause hamnful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could voidthe users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.