FCC ID: 2ASEY-KM002 DREVO BladeMaster PRO mechanical keyboard

BladeMaster PRO 87K USER GUIDE 2-2-1509, No. 10 Wangjing Street, Beijing, China Wireless Connection Indicator The connection indicator is static white in wired mode,static yellow in 2.4GHz wireless mode, and static blue in Bluetooth mode. And in Bluetooth mode, it is rapidly blinking when the keyboard is waiting for connecting. Power Indicator Power indicator will become green breathing when charging,no light when charging is finished, and red breathing when power is under 20%. 1 2 3 Contents Introduction

........................... English

..................................... ......................................... Deutsch

................................... espaol

.................................... Italiano

.................................... 1 5 6 7 8 9 franais

.................................... 10

....................................... 11

....................................... 12 Introduction 6 1 5 5 5 3 4.3 4 4.4 4.5 4.6 4.1 4.2 2 1 1 2 3 4 5 6 On-board memory setting Windows Lock Switch among three devices Genius-Knob Functions Report Rate Adjustment

(1000Hz/1ms, 500Hz/2ms, 250Hz/4ms, 125Hz/8ms) Factory Reset FN+

4.1 4.2 4.3 4.4 4.5 4.6 Lighting Modes Switching

(Static, Spectrum, Rainbow, Power Gauge, Breathing, Twinkling Stars, Reative, Marquee, Aurora, Icey Fire) Brightness Adjustment Backlit Rate Adjustment Backlit Color Switching Music controller Customization

(Default setting is page up/page down/Home/End) FN+

1 4 5 6 1 Keyboard 5 Small brusher 2 6 USB Type-C to USB 2.0 cable Operating manual/After-sale service card 3 7 Keycap puller 4 Dust sheet 2.4GHz USB Receiver 8 Sticker 2 2 7 3 8 DREVO POWER CONSOLE Full-featured Cloud Software Per-key custom to meet your various needs Updating your setting prole into on-board memory of keyboard 1.Open prole management;

2.Drag the prole you chose to zones of on-board memory (three zones in total);

3.Press FN+CTRL+F1/F2/F3 to activate setting proles (G1/G2/G3) Multiple lighting effects achieved at ease System Requirements

- wired connection: Windows xp and above, mac OS

- Bluetooth connection: Windows 8.1 and above, Mac OS 10.10 and above, Android 4.4 and above, IOS 7.0 and above

- 2.4GHz wireless connection: Windows, Mac OS Attention:

1.Please make sure that your device supports Bluetooth 4.0 BLE well before connecting by Bluetooth 4.0 BLE. 2.Please plug the FlashLink 2.4GHz wireless receiver in USB port which is as close as possibleto your keyboard. 3.If you are using a desktop computer, please plug the Bluetooth dongle into the USB port on the motherboard, and move the other wireless reveivers or dongles which work in 2.4GHz frequence away from it. Macro Custom Profile Cloud Sync Batch Script Custom game settings Technical Support One keystroke for all you want Save your personal settings Your cloud assitant goes with you anywhere You can write a batch file and bind it to any key Your favourite game settings can be auto configured for ease of use 3

-1 year limited keyboard manufacturers warranty

-Free online technical support(support@drevo.net) 4 I. Connecting the keyboard Connect the keyboard to USB port in PC/laptop via USB Type C cable. Long press FN+scroll lock to enter pairing mode of Bluetooth(when wireless indicator flash rapidly with bluelight), that means yourkeyboard is ready to connect device. Plug the wireless USB receiver into USB port of pc/laptop (Highly recommended). EN II. Knob Controlling Combo keys INS FN

+

Clockwise Anticlockwise Switch different backlit modes Single click Turn on/off the main backlit Double click Turn on/off the side backlit FN FN FN

+

+

+

DEL HOME END FN PAGE UP+

FN

+

PAGE DOWN Adjust backlit brightness Turn on/off the main backlit Turn on/off the side backlit Accelerate/decelerate backlit Turn on/off the main backlit Turn on/off the side backlit Switch different pre-set backlit colors Turn on/off the main backlit Turn on/off the side backlit Adjust the volume Pause/Play The next Page Up/Page Down Home End

*

The FN + Page Down default setting is PageUp,PageDown,Home and End, you can program it with DPC. III. Using DIP switch ON 1 2 3 4 Exchange capslock and left ctrl Mac mode Dvorak layout Power On/Off Switch DIP 1 is on DIP 2 is on DIP 3 is on DIP 4 The default setting is OFF, when operating the DIP switch, please use a stick. IV. Changing the connection of keyboard FN

+

Print screen FN Scroll lock+

FN

+

pause 5 Wired mode Bluetooth mode 2.4GHz wireless mode V. DPC( DREVO POWER CONSOLE software) User Guide 1.Download the software on DREVO official website www.drevo.net/page/software 2.Connect the keyboard to PC via USB-to-TypeC cable 3.Install DPC 4.Follow the instructions to customize the keyboard (Click "?" for detailed instructions) VI. TroubleShooting 1.Please find another PC/Laptop to verify if possible. 2.Please plug the keyboard into another USB port of PC/Laptop. 3.Upgrade the firmware to the latest version. 4.Confirm the setting like USB Keyboard Support or USB Legacy Mode is ENABLED in your BIOS. 5.Regarding the Bluetooth connection problem, please verify on mobile phone or laptop whether the same problem occurs. 6.For 2.4GHz wireless connection problem, please replug the receiver and long press FN+Pause to pair again. VII.Key Combinations 1.FN+1=1ms/1000Hz 3.FN+4=4ms/250Hz 5.FN+Left Win key=Lock windows 2.FN+2=2ms/500Hz 4.FN+8=8ms/125Hz 6.FN+ESC(Long press for 5 seconds)=Factory reset VIII. Contact Before contacting with our tech support, please prepare the following information on hand:

1.Item and SN number 2.Operating system info Official websitewww.drevo.net Facebook: @drevo.net Twitter: @DREVOUS E-mail: support@drevo.net IX. General user information We reserve the right to make technical modifications which serve the development of our products. Please benoted that improper use andstorage can lead to faults and damage to the products. These instructions are only valid for the supplied product. X. Warranty Unauthorized modifications or repairs done to the product will void the warranty. For more information about the warranty please check:

www.drevo.net/page/warranty. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Label & label location DREVOBladeMasterPROmechanicalkeyboard FCCID:2ASEYKM002 Thisdevicecomplieswithpart15oftheFCCRules. Operationissubjecttothefollowingtwoconditions:(1)this devicemaynotcauseharmfulinterference,and(2)this devicemustacceptanyinterferencereceived,including interferencethatmaycauseundesiredoperation.

(Zhengzhou Fanshi Network Technology Co., Ltd.) Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID:

2ASEY-KM002 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram, Schematics, Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, File Name Block Diagram Schematics Operational Description

(Lan Yu) Rev 11/20/07

Zhengzhou Fanshi Network Technology Co., Ltd. Model Difference Product description: DREVO BladeMaster PRO mechanical keyboard Model name: DREVO BladeMaster, DREVO Calibur, DREVO Excalibur, DREVO Typer, DREVO Tyrfing, DREVO Gramr, DREVO Joyeuse, DREVO Durendal, DREVO Aegis, DREVO Nix, DREVO Seer, DREVO Enigma, Drevo Unicorn, DREVO Tizona, DREVO Naga, DREVO Fortress Trade Name: DREVO FCC ID: 2ASEY-KM002 All the model are the same circuit and RF module, only for model name. Regards Sincerely Clients signature:

Clients name / title : Lan Yu (N/A) Contact information / address: 606 Building G, No.10 Heguang St., Zhengdong New District, Zhengzhou, Henan, China

(Zhengzhou Fanshi Network Technology Co., Ltd.) Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date:

SUBJECT: FCC Application for FCC ID: 2ASEY-KM002 To Whom It May Concern:

We, the undersigned, hereby authorize Andy Yuan at Shenzhen BCTC Testing Co., Ltd. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Andy Yuan of Shenzhen BCTC Testing Co., Ltd. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards,

(Lan Yu)