FCC ID: 2AXQO-Q5 Wireless Over Ear Headphones

Q5S 524*297mm148.6*105mm805RoHS2.0REACH 1.PC 2. 1.2.3 3.PC 1.2.3.PC PC Laptop Steps

(First Use):

a) For PC, please use 3.5mm 1 point 2 adapter cable b) For the rst use, please set the

"Audio" of "Sound and Audio Device Properties" on the computer as the default, turn o the PC "listening function" and click "Speaker" to adjust the volume."Speaker" to adjust the volume. 2.4G 3.5mm PC/PS4/PS5/TV/Swith/

PC/Laptop/Appareil ios/

Appareil Android/PlayStation 4/

PlayStation 5/PS Vita/Xbox oneS/

3.5 USB Line in PC a) USB Q5 b) Windows c) PC PS4 PS5 a) USB a) PC3.5mm 12 b) --

PC a) 3.5mm b) PS4/PS5--

3.5mm 2.4G3.4V,

,Battery low, 3.3V Battery low

5 5POWER ON5, POWER OFF 7.1 1 surround sound on/surroud sound o 2 LED

Product Description Power/7.1 sound/LED Light Status Indicator Mic On/O Volume Adjustment Wheel Product Details Charging Indicator Type-C Interface LINE-IN Interface External Mic Interface Horn diameter 40MM Transmission distance 15 meters,360 degrees Speaker impedance 16 Operating Voltage 3.7V Battery capacity 800mAh Charging voltage Battery Type Polymer lithium battery Microphone sensitivity

-403dB Charging time 2 hours Microphone indicative Omni-directional Battery life 12 hours Low latency 20MS Transmitter parameters 100mA 2MHz 2.402GHz-2.480GHz 7dBm 15m, 360

-85dBm Connection Mode of the Gaming Headset Connection Mode: 2.4G Wireless Mode wired Mode (3.5mm ) Compatible Devices:

PC/PS4/PS5/TV/Swith/Laptop Operation Method:

Plug in the USB receive

, plug and play PC/Laptop/Appareil ios/Appareil Android/PlayStation 4/PlayStation 5

/PS Vita/Xbox oneS/devices with 3.5 audio interface Plug in the 3.5mm audio cable, plug and play a) When using, insert the USB receive into the USB port of the computer, the blue indicator light of the receive ashes, and theQ5 wireless headset device is displayed in the viewing device on the computer, indicating that the installation is successful;

b) After the receive is inserted into the computer, the Windows system of the computer will be automatically connected without requiring the user to install the driver and run the software separately;

c) When using the device for the rst time, open the "Audio" of the "Sound and Audio Device Properties" of this device and s et it to default, turn o the PC

"listening function" and click

"Speaker" to adjust the volume. a) Insert the USB receive into the game device, and the blue indicator light of the receive ashes to be connected;

In 2.4G wireless mode, the battery power is lower than 3.4V, the red light ashes quickly, and a "Battery low"

prompt sound is issued. The receivedoes not need to be paired, it can be used synchronously with the headset when it is plugged in;

If the receive is lost or damaged , please contact the merchant to purchase the same type of receive from the original factory. The new receive needs to be re-paired with the earphone and connected with the operation steps "Refer to the rst use steps" and then re-match. PS4 PS5 Notice:

aInsert the 3.5mm audio cable into the game device;

bOpen PS4/PS5 settings--select

"peripheral devices"--select

"audio devices"--select "output to headphones"--select

"automatically switch output devices". Please make sure that the audio cable is fully inserted into the gaming headset;

Devices using Non-3.5mm interface require additional adapters;

/7.1/

Type-c LINE-IN 40MM 16 800mAh 2 12 Line-in 15360 3.7V

-403dB 20MS 7 dBm 15360 100mA 2MHz Q5 2.402GHz-2.480GHz

-85 dBm MODEL:Q5S 2.4Ghz Wireless Headset 2.4G Button Operation Instructions Button Function Operate Step Power /

Pairing Mode Long press 5s Power On: long press the power button for 5 seconds, the prompt sound "POWER ON";

Power O: long press the power button for 5 seconds, the prompt sound "POWER OFF";

Pairing: Automatically search for pairing connection after power on 7.1 Sound Click 1 time The prompt sound "Surround Sound On / Surround Sound O"

Led Light On /

O Click 2 time Turn on by default, click 2 times to turn on/o Mic On / O On / O Adjust Up: open the microphone Adjust Down: turn o the microphone Volume + /

Volume -

Roll Adjustment Scroll up (+): Volume +

scroll down (-): volume-

Notice:

Plug in the charging cable and the headset will enter the shutdown state;

When the headset is charging, it is forbidden to operate the button to turn it on.

Q&A 1. Q: After connecting to the PC, the headset has sound, but the volume cannot be controlled?

A: Open "Control" and click "Sound Audio Device";

Click on the headphone device in the "Play" panel of the sound setting, set it as the default value and conrm (the default headset is the sound from the headset, and the default sound is the sound from the audio);

There is no sound after the operation, please restart the computer. 2. Q: In wireless mode, what should I do if the sound of the headset is distorted or stuck?

A: Check the source of the sound Disconnect other devices Re-pair the wireless gaming headset. 3. QWhen playing multiple players on the PC, the stuck operation fails, but the headset functions normally?

A: Check the playback decoder;

Please close multiple players;

Check whether there are obstacles between the headset and the PC, which will aect the signal transmission between them. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

LOW nihil 9 H *UCVANTEVUVERVATTRVATE 02 08 06 ggzor oz wtb 00,o+

ATE] TEEL) ATT ATTA ul ahi 04 62 OF OF 05 09 OL 08 06 iittala!

i a, wl

Zhong Tian Ding Sheng (Shenzhen) Industrial Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2022-06-18 Subject: Request for Confidentiality FCC ID: 2AXQO-Q5 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Long-Term Confidentiality Short-Term Confidentiality NOTE 2 Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info No No No No No No No No No No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Beijun Liu Title: Manager 1/1

Zhong Tian Ding Sheng (Shenzhen) Industrial Co., Ltd Letter of Authorization Company: Zhong Tian Ding Sheng (Shenzhen) Industrial Co., Ltd Address: Room 1920, South China Development Center No. 1 Huanan Avenue, Pinghu Street, Longgang District Shenzhen, Guangdong Province Product Name: Wireless Over Ear Headphones Model Number: Q5, Q5S, Q6, Q6S, Q2, Q2S, Q3, Q3S, Q11, Q11S, Q12, Q12S, Q13, Q13S FCC Identifier: 2AXQO-Q5 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Beijun Liu Title: Manager Date: 2022-06-18 Signature of applicant:

1/1

Zhong Tian Ding Sheng (Shenzhen) Industrial Co., Ltd Model Difference Product Name: Wireless Over Ear Headphones Model Number: Q5, Q5S, Q6, Q6S, Q2, Q2S, Q3, Q3S, Q11, Q11S, Q12, Q12S, Q13, Q13S FCC Identifier: 2AXQO-Q5 All the models are the same circuit and RF module, except the model names and outlook color. Regards Sincerely Clients signature Clients name / title : Beijun Liu / Manager Contact information / address: Room 1920, South China Development Center No. 1 Huanan Avenue, Pinghu Street, Longgang District Shenzhen, Guangdong Province