-_ Shark Slider mini INSTRUCTION MANUAL FOR THE SHARK SLIDER MINI SERIES S$ FOOTAGE DK0801001 Thank you for purchasing this iFootage product, The Shark Slider Miniis compact, lightweight, easy to carry andis ideal for all types of studio and location camera movement. To get the most from your Shark Slider Mini, please read the following instructions carefully before operating the equipment. Please keep the manual safe for future reference. This instruction manual supports the following:
1.Shark Slider Mini Track 2.Shark Slider Mini Standard 3.Shark Slider Mini Bundle 4.Mini 2 Axis Module 5.Mini 3 Axis Module 6.Shark Slider Mini Complete 7.Shark Slider Mini Premium Contents M TECHNICAL INFORMATION ~-------777577777-070777-7-7 1 MFEATURES --------------- 2-2-2 - eee - eee 2 MPRECAUTIONS -------------------------------- 2 COMPONENT DESCRIPTION ---------------------- 3-4 STATE INDICATORS ---------------------------- 5 MINSTALLATION GUIDE --------------------------- 6~16 SETUP AND SCENARIOS ------------------------- 17~22 MMAINTENANCE -------------------------------- 23~24 Av Notes: Please read the following information:
1. Whilst every care has been taken to ensure that this manual supports the product and our customers, some ambiguity or description omissions may exist. We always welcome customer feedback on how we can improve the product manual. 2. Please note that customers who have purchased the following will need to download the iFootage App which currently supports iPhone |OS8.3 and above and will soon support iPad and Android: Mini 2 Axis Module, Mini 3 Axis Module, Shark Slider Mini Complete and Shark Slider Mini Premium. 3. Please check all components and packaging for any damage. In the case of missing or defective parts, please contact your distributor as soon as possible. 4. When the motion module is switched off but still connected to power via a USB port, power will still be supplied to the battery. When the motion module is switched on, power is supplied directly to the motion module. If the battery inside the motion module is in power off mode the battery will not charge . Technical Information ii 0.68Kg/1.5Lb 404*95*25 Weight fetter] Aluminum magnesium alloys + SUS304 Stainless steel Shark Slider Mini Standard 460+ 5mm Weight 1.5Kg(with pulley )/3.3Lb Useable Length 210+5mm 377*45*25 8Kg/17.6Lb Track Specifications retell Aluminum magnesium alloys + SUS304 Stainless steel Shark Slider Mini Bundle Length 840+5mm Weight 2.2Kg (with pulley) /4.85Lb Useable Length 600+5mm Track Specifications 377*45*25 3.2Kg/7Lb Material Aluminum magnesium alloys + SUS304 Stainless steel Mini 3 Axis Module 0-30 /s Omm-50mm/s 01 Module slider Location accuracy of Pan Head 0.00325mm Max Load of Pan Head Location accuracy of Module iMer-lenoimeliie(-imileromy | 2.0kg/4.4Lb Slider endurance time nN eB Bluetooth and 2.4GHz Radio frequency Operating voltage 7.2-8.4V Features (depending on package purchased) (i 1. Lightweight, compact, portable and easy to deploy. 2. Seamless track locking design with track extensions available as an accessory. 3. High quality design, engineering, durable materials (hard anodized technology) and components. 4. Unique, quick release, original design flywheel and motion module. 5. Agile and adjustable angle of carriage plate, allows for fast adjustment of camera position. 6. Modular design allows for future additions and updates to mini slider including moving from manual operation to automated motion control of up to 3 axis. 7. Highest location accuracy for motion control slider is 0.00325mm and for the Pan and Tilt Head itis 0.001 . 8. Starting detection avoids repetition of manual reset with multiple recordings. 9. USB power charge and power supply to motors. 10. Reliable, wireless control using Bluetooth BLE 4.0 and 2.4 GHz. 11. Instant automatic connectivity via Smartphone Bluetooth BLE 4.0. 12. Multiple key frame Bezier curve preset timeline function allowing you to accurately programme all three axis. Perfect for sophisticated time-lapse recording. 13. iFootage motion control App with free firmware updates. 14. Automatic target control (focal point detection)-ideal for interviews. 15. Preset, repeatable camera movement. 16. Slider can be utilized both vertically and horizontally. 17. Panoramic function. 18. Photostitching function. 19. Toolless and beltless assembly for super smooth movement. precautions ee
. The Shark Slider Mini connects via Bluetooth BLE 4.0 technology. Prior to opening App ensure that your Smartphone's Bluetooth is activated. 2. Please use only FW50 batteries. Alternative batteries may damage the unit. 3. As aresult of lithium battery discharge characteristics and the overall power requirement for the Shark Slider Mini to operate, should the battery power be 10%
or less, the operation time may be reduced to less than 10 minutes. Please ensure that batteries are fully charged so that there is sufficient power for sustained operation. 4. Once activated, Motion X2 automatically moves to the initial status/zero point. Please ensure that the track is clear of obstacles prior to starting. It is recommended that users keep their hands clear of the tracks also to avoid damage or injury. 5. Always protect the equipment when working in dusty, damp or wet environments. Failure to ensure adequate protection from elements may result in equipment failure. 6. Donotuse this motion control unit in environments above 50 C and below-20 C degrees. 7. Any disassembly or modification without authorization or improper use of the equipment may result in damage and affect the warranty.
=H Component description aa
@ Shark Slider Mini Standard Foot stand lock buckle J 1/4" hole Bi Angle plate buckle Gi Clamp-A BG Lock buckle of 1-Axis module Mf Carriage Flat pulley i Carriage locking control El Flywheel W Track WH Clamp-B Foot stand Adjustable legs @ Locking control fB Hanging buckle IB Angle plate Angle locking control 3/8" screw
=a Component description i
@ Shark Slider Mini Motion Control Version
} LED1 LED2 LEDS LED4 }
Hanging pulley EJ Battery cable cover Bi Battery cover Micro USB port Ef 2.5 inch shutter interface J Slider module Indicator light [El Power switch BI Locking button for X2 Mini 1/4" screw 1/4" Screw/ 3/8" Screw [H Locking control
*Micro USB port supplies power to Pan and Tilt Head and Slider or can be used to charge battery.
*To reset to factory settings, press and hold the On/Off switch, then insert the Cees wait 10 seconds until the red light flashes to indicate the reset is complete. Status indicators LED status explained:
@ LED green OLED off
@ LED flashes green
@ LED flashes red LED1 PED2 LED3 LED4 Current battery level e @ @ @ 75%~100%
@ @ @ 50%~75%
@ @ 25%~50%
e@ 0%~25%
* Quick press the On/Off switch to check the battery level while the unit is powered off.In standby mode the to indicate the battery level. LED will flash every two seconds Current battery level 100%
75%~100%
50%~75%
25%~50%
0%~25%
charge the unit during powered off mode. LED1 LED2 REDS LED4 Current state
@ @ @ @ Shutter ready to fire
@ @ @ @ Shutter fire after 0.3s LED1 LED2 LEDS LED4 Current state
@ @ oO @ LED flashes from 4 to 4 and all 4 LED flash 3times.
@0 Oo O O LED lights off from 4 to 4 and all 4 LED red lights flash 4 times.
*To switch ON or Off, press and hold he On/Off switch for 2 seconds. Installation guid c a How to install the carriage Step 1: Attach carriage by carefully sliding carriage onto the track at one end. Gently push carriage along length of track to ensure correct contact and smooth operation. Step 2: Attach both track end/feet by opening buckle connection on track, pushing into place and locking using buckle system. You may wish to attach one end prior to attaching carriage, then fit the other end. Installation guid c as How to install the flywheel ing port on the side of the carriage. ywheel into the receiv
You will audibly hear it click as it locks into place. Move carriage or turn flywheel to check itis installed correctly. Step: Press the fi Completed installed diagram for reference:
Installation guide as
@ How to remove the flywheel J Firmly hold the flywheel and gently pull to the left, then do the same, but to the right followed by pulling the flywheel away from the carriage at 90 degrees. This will ensure safe removal of the flywheel from the carriage. g@ Locking the module In order to prevent the carriage from moving, rotate the carriage locking control, following the direction of the arrow direction.
(Note: Locking is not intended to lock the unit completely in position, itis designed to assist stability during 2 axis operation with the X2 Mini) Installation guide
@ Mounting the Shark Slider Mini onto a tripod with a hemisphere base Step 1: Attach the hemisphere base onto the slider using the central screw hole on the track underside. Screw the hemisphere base in a clockwise direction until fully tightened.
: _ Hemisphere base
~ST-AS Step 2: Mount the hemisphere base on the tripod and adjust the slider until the carriage's spirit level shows the slider is horizontal, Lock into position. Bowl Locking handle Installation guide as
@ Extending the track Step 1:Remove the foot stand from one end of the slider. Step 2: Attach the track extension to existing track using the male and female connecting nodes. (see diagram). Joint-A(female track) ~ ~ ~~ '
Joint-B(male tack) Step 3: Use the buckle locking system to lock the two tracks together. Check buckles are closed and tracks are secured together successfully prior to replacing and locking in place the foot stand. Clamp-A(Female lock) Clamp-B(Male lock) Step 4: Place the track connection plate on the underside of the joined track and secure with screws provided. Check that the plate is secure and is adequately supporting the track joint. 3/8 "hole
-10-
Installation guid c is w@ How to install the single-axis module Step 1:Remove the flywheel as per instructions. Step 2:Attach the single-axis module onto the carriage as shown in the figure. Step 3:Check that the single-axis module is securely attached to the carriage. Step 4:Check track is clear of obstruction. Step 5:install battery and switch on unit.
=44=
Installation guid c Ia
& How to install the battery Step :To open up the battery cover move the switch to 'OPEN'. Step 2:Carefully install battery ensuring positive end is connected correctly. Step 3:Close battery compartment Battery curved side
*Insert the battery in the 1 -axis module, pay attention to the direction, DO NOT insert itin opposite direction.
-12-
Installation guid c
= Automatic starting point function Step :Insert the battery and close the battery cover. Press andhold On switch for at least two seconds until the four indicator lights flash three times (green light), after which the pan head will begin to move to the direction as shown in the chart. Automatic Sensor Automatic Sensor Automatic Sensor Automatic Sensor
*The carriage will stop automatically 10mm from the left foot stand.(The 1 axis slide module is equipped with a sensor which will move to the starting point and stop automatically)
*For maximum run time, please ensure that you run the single axis module ona fully charged battery.
=13-
Installation guide [is Howto disassemble the single axis module Step 1:Press the locking latches on both sides of the unit simultaneously. Step 2:Gently remove the single axis module from the carriage at a 90 degree angle to the carriage.
-14-
Installation guide
@ Carriage Angle Plate Step :Turn the angle plate anti-clockwise. Press to release the angle plate latch, lift the angle plate and adjust to desired angle. Angle Plate Angle plate latch Angle Plate Lock How to use the loading function Step 1 Gn. the pulley cord (Push the pulley pins through the groove at the end). Pulley Mounting Groove Installation Diagram
*The carriage and camera may slip if the rake or slider set up angle is too |
steep. This can be prevented by using the pulley and correct counterweight. These should be removed when notin use.
=[5-
Installation guid c mw How to use the loading function Step 2:Attach the counterweight and secure the cord to the hanging buckle. Step 3:Set up fully loaded slider at the angle you wish to use it and carefully test out counterweight. Increase or reduce weight accordingly. The pulley must be installed using an appropriate counterweight for the set up and weight of the camera and head.
*Care must be taken to ensure that user's fingers and hands are not pinched or trapped within moving the parts.
=46=
Set up and scenarios
@ How to mount the X2 Mini ona tripod Step 1:Please ensure that the tripod camera plate has a 3/8" screw and therefore matches the X2 mini pan head 3/8" screw thread. Step 2:Carefully place the X2 Mini onto the tripod camera plate and screw the two together ensuring the thread is not crossed. Step 3:Tighten and lock plate onto tripod. Step 4:Check items are secure prior to use.Carry out reverse procedure when removing X2 Mini from a tripod.
=f7=
Set up and scenarios an Installing the X2 mini onto the shark slider mini Step 1:Carefully place the thread 3/8" hole of the X2 Mini pan head onto the 3/8"
screw on top of the Shark Slider carriage. Rotate clockwise. Step 2:Press the pan loging button and rotate the pan head at the same time to lock the pan head tighter. You will also need to press the locking button when removing the pan head from the slider carriage. Step 3:Subject or target should be in front of the pan head when using the target control function.
~18-
Set up and scenarios ns
@ Installing the X2 mini onto the shark slider mini Initialisation failed Initialisation complete It is important to test out the overall balance and functionality of the X2 Mini when attached to the slider fully laden, in other words with the camera and lens attached. When using along lens, please adjust the positioning of the camera in order to balance it on the X2 Mini. Failure to do so may result in the slider and camera tipping forward. Itis worth noting that the maximum pitch angle range for X2 Miniis 35 and that once switched on the X2 will automatically look for the initial status
/zero point. Please ensure there is no obstacle on the track prior to start up. Step :You should insert the shutter cable after mounting the camera.
*|f using long lenses, please ensure the center of balance is adjusted properly prior to switching on. With its built-in sensor, the X2 Mini will automatically find its starting point after poe up. If using the X2 Mini on a tripod, it will use the power up position as the starting point.
=9=
Set up and scenarios a How to mount the X2 Mini L Plate (Optional accessory) Step 1: Installing the L Plate to the X2 Mini. Camera Screw 1/4 L Plate Locking Joint L Plate Main Body Step 2: A. After installing the L Plate to the X2 Mini, the X2 Mini can be attached directly to the low profile tripod legs or standard tripod.
~20-
Set up and scenarios B. After installing the L Plate to the X2 Mini, the X2 Mini can be attached directly to the Shark Slider Mini.
@ X2 MiniL Plate - Function notes 1. The maximum tilt range for the X2 Miniis 35 butthe angle can be adjusted by re-positioning the locking joint providing up to 280 degrees. 2. After installing the L Plate the maximum payload is increased and we recommend its use with cameras from 2.5kg to 3.5kg including lens. AIS Set up and scenarios
= Notes:
Z * ue 7A
* SF <s more than =300mm 4 e cS %
9 4 4 gO i 1 t t y 7 E Y
(CoEoG ee 0 Se i
\ A
O N oO XN 1.When installing the L Plate on a low profile tripod or any other tripod, the leg spread must be more than =300mm in order to avoid tipping. 2.When operating the camera via the L Plate accessory please ensure clearance of surrounding objects such as tripod or slider.
-22-
Maintenanc c 1. Please ensure that the track is free from dust, particles and fluids. Slider track: Raised tooth section. AS 2. Please ensure that the angle plate area is clean to avoid any damage and ensure optimum performance. 4. After use in wet or damp conditions please ensure that any moisture is removed and the slider is completely dry prior to storage. This can be achieved using an appropriate soft cloth. 5. Handle all parts carefully and always protect the slider and its components during transportation and storage. We would recommend that the slider and its component parts are transported and stored in a suitable carry case or bag. This will help protect it and prevent loss of parts.
=93=
Maintenance 6. After long periods of usage, the track connection point may become loose. This can be fixed by a simply re-adjusting the clamps.
*. Step 1:Flip and open the clamp and SN locate the flat screw. Step 2:Turn clockwise to tighter}
the screws. fo Seg ee eee ee
*iFootage reserve the right to alter or rectifying all hardware and software information and specifications at any time without prior notice. If there any differences between
{necanlents of the instruction booklet and the actual product, please refer to the product.
-24-
EU declaration For Slider: 2.4G SRD 2402MHz, -5.5dBm (e.i.r.p); Bluetooth, BLE 4.0, 2402-2480MHz, -2.85dBm (e.i.r.p);
For X2: 2.4G SRD 2402MHz, -4.9dBm (e.i.r.p); Bluetooth, BLE 4.0, 2402-2480MHz, 2.57dBm (e.i.r.p) Hereby, FOOTAGE INTERNATIONAL(Hk) LIMITED declares that the radio equipment type [designation of type of radio equipment] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: WWW.IFOOTAGEGEAR.COM FCC ID: 2AONZ1AM FCCID: 2AONZX2M This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. INFORMATION OF MANUFACTURER IFOOTAG. LIMITED : FOOTAGE INTERNATIONAL(Hk) LIMITED UK Design & Made in China Origin: China Website: www.ifootagegear.com Download Link