PRODUCT MANUAL Structure description
| Porras Powen Starion
@ LCD screen () TYPE-C-PD 60W (input & output port) (Q) AC inverter output port
@ Recharging interface TYPE-C output port 0) Ring light (traffic warning light & SOS help light)
(B) USB-QC3.0 (quick charge output port) (7) DC12V output port (1) Wireless charging
@ USB-A output port Cigarette lighter output port
% The AC/DC interface has the function of automatic load identification, but it will shut down automatically if the equipment cannot be recognized when the power is too low. It can be forced to open the interface by long press 2S, and it must be closed manually when the power is shut down. Interface and function description 1.LCD screen A. Total output power: display the total output power of all ports in watts;
B. Power indicator: shows the percentage of remaining power and the number of remaining batteries. When the power is full, it will close LCD screen automatically. If 20% power, the buzzer will beep one time. If 10% power, the buzzer will beep two times and AC output closed. If 5% power, it will remind you to recharge by beep three times. C. Remaining time: calculate the remaining time according to current total output power and existing power. When showing number in nonflashing state, it means remaining working time by hours, if flashing state, it means remaining working time by minutes. D. Over temperature protection:
(1) When battery temperature exceed 60 Celsius in charging state, it start over temperature protection, if temperature less than 50 Celsius, protection released.
(2) When battery temperature exceed 50 Celsius in recharging state, it start over temperature protection, if temperature less than 40 Celsius, protection released.
(3) When key components working temperature exceed setting rated value in AC/DC mode, it start over temperature protection. E. Fan cooling indicator light: the cooling fan will turn on automatically when temperature reaches the control value. F. Overload & short circuit protection: It will stop output warning with beep ringing when overloaded or short circuited. G. Port usage status identification. When the TYPE-C-PD port is plugged into input/output devices, the corresponding display characters will light up, and when the AC/DC/wireless charging button is pressed, the corresponding identification lights up. Interface and function description 2.Recharging interface Support three recharge way: 1. adapter; 2. solar panel; 3. cigarette lighter. It provides short circuit, over recharge, adaptive recharging protection. 3.USB-QC3.0 (quick charge output port) Two independent quick charge ports, support quick charge devices with QC3.0 protocol, USB compatible as well. The Max output is 18W (5V/ 3A, 9V/ 2A, 12V/ 1.5A) providing short circuit, over load, over charge, over recharge protection. 4.USB-A output port USB-A output port, the Max output is 5V/ 3A, providing short circuit, over load, over charge, over recharge protection. 5.TYPE-C-PD 60W (input & output port)
(1) It can support bidirectional power transmission: Input(recharging) and output(with load). Standard power is GOW, Max 65W;
(2) When the TYPE-C port connect to devices, the indicator will light up automatically. When pull out the devices, it turn off;
(3) Identify the device under PD protocol automatically, compat 5V/9V/12V/15V/20V 3A output;
(4) This port has short circuit, over load, over charge, over recharge protection functions. 6.TYPE-C output port TYPE-C output port, the Max output is 5V/ 3A, providing short circuit, over load, over charge, over recharge protection. Interface and function description 7.DC 12V output port The port connect with DC 12V devices or auto electrical parts freely, the two ports support 120W/10A Max in total.
(the output current of each independent port is 10A Max among 2 ports). These 2 port provide short circuit, over load, over charge, over recharge protection functions. 8.Cigarette lighter output port Cigarette lighter output port, the Max output is 12V/10A, providing short circuit, over load, over charge, over recharge protection. 9. AC inverter output port Pure sine wave output. 555Wh: 500W (standard), 590W (Max.);
722Wh: 7OOW (standard), 800OW (Max.);
With overload, short circuit, over temperature, over discharge and other protection functions, it can support all AC electrical equipment within power range. 10.Ring light (traffic warning light & SOS help light) Offering warm white, cool white, neutral white three color as ring light. When a car gets into danger on road, the warning light could indicate other vehicles avoiding. This flash light could switch to SOS mode when people are in danger. 11. Wireless charging Supports mobile phones with wireless charging function. Max output power is 10W. Identify devices automatically. The AC/DC interface has the function of automatic load identification, but it will shut down automatically if the equipment cannot be recognized when the power is too low. It can be forced to open the interface by long press 2S, and it must be closed manually when the power is shut down. Technical parameters charge way Please charge the battery before using or storing. The indicator will light up and battery symbol running. The General LCD screen will display the current charging percent and power at the same time indicator light lighting up. Weight 7KG/8KG When the LCD screen displays 100%, it means the power is full. The current power can be viewed through LCD screen. Specification Working temperature 236.5x220x226mm Operating temperature in charging state: 0 ~ 40C Operating temperature in noncharging state : -10 ~ 50C Recharger way Storage temperature 0~ 35C Charging voltage:10-30V 555Wh 722Wh Certification CE-RED PSE FCC-ID RoHS UN38.3 MSDS IEC62133 Input DC input port
(adapter/solar/cigarette lighter) DC 7909 port Charging voltage: DC10-30V / constant 80W i Type-C-PD input port Output Type-C-PD port (5V/9V/12V/15V/20V, 3A) Type-C-PD output port (x1) Type-C output port (x1) USB-QC3.0 quick charge output port (x2) USB-A output port (x2) DC 12V output (x2) Type-C-PD port (5V/9V/12V/15V/20V, 3A) Type-C port (5V/3A Max) USB port (5V/3A,9V/2A,12V/1.5A) Vehicle's cigarette USB port (5V/3A Max) lighter recharge DC 5521 port (12V/10A)
@ GOW TYPE-C-PD recharger W@Me- .-80W Standard recharger ~5 hours ~6.5 hours Cigarette lighter output port (x1) AC DC inverter AC output Internal Battery type Battery capacity Cigarette lighter port (12V/10A) AC universal socket/ AC socket (US)/ AC socket (JP) 555Wh/ 722Wh
| 100W Solar panel
= 13 hours = 16 hours
(The charging time is determined by the sunlight intensity) Support MPPT charging of solar panel. The data is only for reference. charging time will be different due to the environment, methods and Warranty 1 year other factors. Malfunction elimination Eieunaten Expel the breakdown 1.Charger, equipment and electricity do not connect Check whether the charger, equipment and electricity properly (at this time, the battery indicator is not running). connected well. 2.Connected properly, but the battery indicator Cannot be doesnot run. PRORERY Charger is broken, please contact after-sale service. recharged Battery temperature is too high (caused by high 3.Connected properly, still unable to recharge. storage temperature or the battery just discharged, not cooled yet). 1.The connecting line between equipment and Make sure the equipment and devices connected devices unproperly. properly. 2.The output port switch do not open (type-C port not Turn on the output port switch, and the indicator light need open, it can be identified automatically). will be on. 3.Low power (when the power is less than 10%, the AC output will be turned off automatically, and the DC can work normally. If the AC needed in emergency, it Recharge the equipment in time. can be forced to start by pressing the AC key long time for 5 seconds). Damaged or other malfunction, please contact the 4.Still no output after checking 1.2.3 steps. after-sales department. 1.The device rated or instant power exceed the rated
: pene: Choose a more powerful outdoor power supply model. power of equipment it will interrupt. 2.It will turn off the output due to operating temperature It will start work when the equipment cool down. protection by battery or key components. Interrupt with 3.Overload or short circuit. The output recovers after malfunction solved. device 4.When the power of the load equipment is too small, the equipment cannot be identified and will shut down automatically. Damaged or other malfunction, please contact the 5.The output still shut down after checking 1.2.3.4 steps. after-sales department. No output Press 2S to force the machine to start, and it must be closed manually when the machine is shut down. Warning & Caution Please follow basic precautions including:
A.Please read all instructions before using product. B.Please supervision your children when use product. C.Do not use accessories made by non-professional manufacturer avoiding electronic shock risk. D.Please take off the power plug while no using. E.Do not disassemble, repair or modify the products to avoid fire, explose or electronicshock risk. F.Do not use damaged wires , plugs or cable to avoid electronicshock risk. G.Please charge and discharge the product in a well-ventilated place, do not restrict the ventilation of the product in any way. H.Please place the product in a ventilated and dry place to avoid electric shock by getting water.
|.Do not place the product close to or in a fire or expose it to heat. It may lead to fire/ explode accident. J.Do not use or place the product under high temperature (in hot sunlight or in hot car), otherwise it may cause battery overheat, fire, function failure, shorten lifespan or other risks. K.To preserve the battery low power, please use and recharge at least once every 3 months. L.Take off the plus in time when product is fully charged to avoid possible accidents. Warranty The warranty period is 12 months. The warranty period starts from the purchase date. To estimate the start time, your purchase certificate or other reasonable documents shall be provided. Exclusions 1.The appearance of the product is damaged after use. 2.Disassembled and repaired on your own. 3.Performance failure caused by human factors. 4.Damage caused by natural disasters, lightning, accidents and other irresistible factors. FCC Statement This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions:
(1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the partyresponsible for compliance could void the user's authority tooperate this equipment. Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
+ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
+ Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
e Increase the separation between the equipment and any other radio device. e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Rw+:165x140mm ik 2005. MHZ Be WSs ot
=H C0 ot
=) co AJ m110