FCC ID: 2BDAR-B009A Baby Swing

Instruction Manual Before installing and using, please follow the instructions carefully INDEX Product Specifications

................................................. 01 Component List

............................................................ 02 03 How to Assemble the Baby Swing

............................... Power Supply

............................................................... Remote Control Instructions

......................................... 04 05 06 Safety Instructions

........................................................ 07 08 09 Product Specifications Product Name Baby Swing Product mode B008-UP Input voltage 100-240V/50/60HZ0.3A Output voltage 5-58VS100MA Applicable age 0-12 Months 9KGS weight Execuve standard EN71-1 EN71-2 EN71-3 Producon date Marked on the body of the goods Warning Do not use the non-matching adaptor Warning

(1) No short circuit of power terminals.

(2) Keep the adaptor away from children while using.

(3) Check the adaptor and accessories regularly, and if you nd any damage, please stop using them. Cleaning and Washing Seat cushion: The seat cushion is removable and washable. It is rec-

ommended to wash by hand but not machine wash. Aer soaking it in water and adding so detergent, use clean water to clean it,then wring out the water and place it at out of direct sunlight to dry Inner ller: reproof hard resin coon. Warning! Machine washing, bleaching and tumble drying are prohibited. 01 Seat Cloth 1 Motor 1 Foot Tubes 2 Seat Tube Screws

(6.0*12mm) 4 Canopy with Mosquito Net 1 Screws for Foot Tubes

(3.5*12mm) 4 How to assemble the baby swing 1. Assembly method

(This should be done by an adult) Please insert the plasc on both sides of the base into two foot tubes, and ghten the 4 screws (3.5*12mm) to 4 holes with the screwdriver. 02 2. Assembly method (This should be done by an adult) Expand the cradle tube and insert the plasc plug into the tube. ( as illustrated ) Please lock in 4 (6.0 * 12mm) screws. ( as illustrated ) 03

, in water. Canopy 04 Product Material Number Name Material A B C Base Plasc + Aluminum Tube Pedestal Fabric+ Aluminum tube + Plasc Canopy Fabric+ Plasc Power Supply Power socket USB socket

One: The standard power supply is the 5mm adapter supplied with the product to supply power, the adapter input voltage is AC100-240V, 50/60Hz; the output voltage is DC6V, 1.0A. Two: The power bank can be used for temporary power supply, but because the voltage is only 5V, there may be insucient power, so long-term use is not recommended. 05 Remote Control Instructions Power on/o Play/Pause VOL+

Volume up Timer Timer seng Previous song VOL-

Volume down Music Built-in music/

Bluetooth music Next song SLEEP Sleep mode 1 2 3 4 5 Five swing modes DK Touch sense swing MUSIC Timer Music VOL+

VOL-

SLEEP DK 1 3 STOP 4 2 5 Stop Stop Panel Five swing modes Timer buon with three modes Power on/o Bluetooth Music play and pause (short press) Music switch buon (long press for 2 seconds) Volume control (long press for 3 seconds) Touch sense swing 06 Top hole boom hole Through the tape form the top hole rst and, then through the boom hole, harden the tape. Put the baby into the seat ,buckle up the seat belts 07 Safety Instructions WARNING 1. Keep the seat belt on while using it. 2. Do not leave the child unaended. 3. Applicable age: 0-12 months old. 4. The maximum weight for this product is 9 kg. 5. Do not move or li the product by the mosquito net. 6. Do not move or li the product when the child is in the seat. 7. Do not hang other items from the canopy except the supplied toys. 8. Do not place the product at a high posion (table top, stairs, or other high posion from the ground) as it may fall and cause injury. 9. It is dangerous to use this product on an elevated surface. 10. Do no tuse the product on so surfaces (sofa, bed) to avoid falling and causing suocaon. 11. Do not use it for babies who can stand up independently to prevent hidden dangers, such as being entangled in the seat belt or strangled!

12. This product is not classied as a toy. 13. When the music player is connected, please make sure the volume is set to a low voice inially. 14. Do not use if any parts are missing or broken. Never substute parts. 15. Keep the product away from re. 08 FALL AND STRANGULATION HAZARDS: Infants have suered head injuries falling from swings and have strangled in straps. ALWAYS use restraints. Adjust to t snugly. STOP using product when infant aempts to climb out (approximately 9 months). Stay near and watch baby during use. This product is not safe for sleep or unsupervised use. If baby falls asleep, remove baby as soon as possible and place baby on a rm, at sleep surface such as a crib or bassinet. CAUTION To prevent baery leaks, which can burn skin and eyes:

Always replace the enre set of baeries at one me. Never mix old and new baeries, or baeries of dierent brands or types. Remove baeries when storing product for a long me. Dispose of used baeries immediately. ALWAYS place swing on oor. Never use on any elevated surface. 09 FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Page 1 of 1 FCC ID: 2BDAR-B009A LABEL AND LOCATION Baby Swing Model: B009A FCC ID: 2BDAR-B009A

(Size: L4.0cm x 3.0cm) Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

Zhongshan Haimao Cross Border Information Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 10/31/2023 Zhongshan Haimao Cross Border Information Technology Co., Ltd acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BDAR-B009A):

Name and company of U.S. agent:

FCC US Agent, LLC Physical U.S. address of agent:

3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN of U.S. agent:

0033402884 Email address of U.S. agent:

Support@FCCUSAgent.com FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of Zhongshan Haimao Cross Border Information Technology Co., Ltd. Zhongshan Haimao Cross Border Information Technology Co., Ltd with the FRN 0034391425 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature ZHIMIN LIANG Product Manager Signature Tim Payne Manager Zhongshan Haimao Cross Border Information FCC US Agent, LLC Technology Co., Ltd 5 0 V

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U

l e d o m

_ 8 4

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products:

FCC ID 2BDAR-B009A Model name B009A For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:

the Operational Description the Block Diagram the Schematics The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-10-31 Name / Title: ZHIMIN LIANG / Product Manager Company: Zhongshan Haimao Cross Border Information Technology Co., Ltd Address: 108-C Card, First Floor, Building 3, Zhongshan Industrial Design Industrial Park, No. 64 Shakou East Road, Xiaolan Town, ZHONGSHAN, GUANGDONG, China Phone: +86-760-22231090 Fax: N/A E-Mail: 67705209@qq.com

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commissions Rules (47 C.F.R.) we attest as follows:

We, applicant Company Name: Zhongshan Haimao Cross Border Information Technology Address:

Co., Ltd 108-C Card, First Floor, Building 3, Zhongshan Industrial Design Industrial Park, No. 64 Shakou East Road, Xiaolan Town, ZHONGSHAN, GUANGDONG, China Phone: +86-15915323547 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-10-31 Name / Title: ZHIMIN LIANG / Product Manager Company: Zhongshan Haimao Cross Border Information Technology Co., Ltd Address: 108-C Card, First Floor, Building 3, Zhongshan Industrial Design Industrial Park, No. 64 Shakou East Road, Xiaolan Town, ZHONGSHAN, GUANGDONG, China Phone: +86-760-22231090 Fax: N/A E-Mail: 67705209@qq.com

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commissions Rules (47 C.F.R.) we attest as follows for the product listed below:

FCC ID 2BB5W-A16 We, applicant Model name A16 Company Name: Zhongshan Haimao Cross Border Information Technology Address:

Co., Ltd 108-C Card, First Floor, Building 3, Zhongshan Industrial Design Industrial Park, No. 64 Shakou East Road, Xiaolan Town, ZHONGSHAN, GUANGDONG, China Phone: +86-15915323547 certify that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-10-31 Name / Title: ZHIMIN LIANG / Product Manager Company: Zhongshan Haimao Cross Border Information Technology Co., Ltd Address: 108-C Card, First Floor, Building 3, Zhongshan Industrial Design Industrial Park, No. 64 Shakou East Road, Xiaolan Town, ZHONGSHAN, GUANGDONG, China Phone: +86-760-22231090 Fax: N/A E-Mail: 67705209@qq.com