HUMIDIFIER V0 CONTENT PRODUCT OVERVIEW Components Product Overview Specifications Function Instruction Maintenance Safety Warning Attention FAQ 01 02 02 07 08 08 09 Mist outlet Mistchip Air outlet Housing Air inlet SPECIFICATIONS Button Function HUMIDIFIER Model:PRO-4 Cover Water tank Water level window Water level controller Lighting On/Off button 01 Model No. Size Net Weight Input Power Volume Coverage Area PRO-4 250* 117* 218 mm 1.42KG AC 100-240V 50/60HZ 21W 2.2L
<20m2 FUNCTION INSTRUCTION Preparation Before Use WiFi indicator Medium-mode indicator Low-mode indicator Power indicator Button 1. Press the button, the power indicator will light white, the low-mode indicator will light green at the same time, and the green water level indicator will be on. The device starts to work in low mode. 2. Press the button again,the low-mode indicator light is off, the medium-mode indicator light is on, and the mist volume is switched to the medium mode. 3. Press the button for the third time, the low-mode indicator and the medium-mode indicator lights on, and the mist volume switches to high mode. 4. Press the button for the forth time, the low-mode indicator and the medium-mode indicator lights 1. Open the cover and add appropriate water into the water tank, but the water should not are off, then the device stops working and enters the standby state. exceed MAX water level. 2. Put back the cover and place the water tank on the housing and then connect the plug to the power socket,after the power indicator lights up white for about 1 second, the device enters standby state. 3. The WiFi indicator flashes quickly. If there is a paired device before, the WiFi indicator will be always on. If you need to re-pair, you need to press the button to flash the WiFi indicator.For more details, please see the Smart Operation Instruction. 5. The product has humidity detection and control function. After the mobile phone enters the APP control interface, the mobile phone interface will display the current environmental humidity, and the humidity required to be humidified can be set in the APP interface. When the current ambient humidity reaches the set humidity, the humidification will be automatically stopped. When current ambient humidity below the set humidity, it will automatically begin to humidify. 03 05 07 09 02 Smart Operation Instruction Works with smart life APP 1.Download & Registration Scan the QR code to download Smart Life APP. You can also search Smart Life in either APP store or Google Play to install the APP. Open the Smart Life APP, tap Register to register a Smart Life account with your phone number or E-mail. Then sign in the APP. 2.Add Devices in Easy Mode (Recommend) Make sure your smart device is energized and your mobile phone is connected to your WiFi network. If the WiFi indicator of smart device keeps flashing to indicate that the smart device enters the mode of configuring the mobile phone; if not, please press the Button for more than 7 seconds, after hearing the smart devices beep, then loose it and this means the device is already for configuration. Open your Smart Life APP and tap + on the top right of the APP. Select type of service device, tap All devices and turn to Add Device, then automatically fetch the password of the WiFi network that your mobile phone connects to. Then tap OK to connect to the device. 04 d.Make sure the connected devices have not reached the maximum number of WiFi router. If not, please disconnect the network of some devices. e.Make sure password of the WiFi network is correct when adding new device. f.Make sure you have not used any Chinese Characters to name your WiFi network.
(2) Can I control device with 2G/3G/4G/5G network?
When adding device for the first time, it requires that your mobile phone and device are connected to the same WiFi network. After adding device successfully, you can remote control your device with 2G/3G/4G/5G network.
(3) How can I share my device with others?
Open your Smart Life APP, select your device and tap the button in the top right corner. Tap Shared devices and Add sharing, then select the country/region where the account belongs to and input the Account number(a phone number or an E-mail address) you want to share with. (Please make sure the phone number or E-mail is registered.)
(4) How can I manager the device shared by others?
Open your Smart Life and you can operate the device by tapping the product in the "Shared device I received" on the home page.
(5) How to remove device?
Method 1: Press the Button for more than 7 seconds, you will hear beep, it means the device is removed, and the WiFi indicator light begin to flash quickly again. Method 2: Open your Smart Life APP, select your device and tap the button in the top right corner. Tap More.Then tap the Remove Device in the bottom, the WiFi indicator light begin to flash quickly again. 06 SAFETY WARNING When appearing Successfully added 1 device, it means the connection is complete and your device will be listed in your APP list. 3. Add Devices in AP Mode Press the Button for more than 7 seconds until hearing beep and the WiFi indicator light begin to flash quickly, then press the Button for another 7 seconds until hearing beep and the indicator light begin flash slowly, this means the device is already for configuration in the AP Mode. Now you can control your smart device via your mobile phone APP anytime and anywhere
(Make sure your mobile phone and smart device are all connected to the network). You can share your devices with your friend or family after you add your devices successfully. 4. Q&A
(1) Why failed in adding device?
a.Make sure the device is powered on and close to your mobile phone when adding device. b.Make sure your mobile phone is connected to the WiFi network and your WiFi router is working properly. c.Make sure the device is ready for configuration.Please refer to the Product Instruction Add Devices in Easy Mode or Add Devices in AP Mode for details. Notice 1. If the water tank is short of water, the power indicator will light in red for reminder. 2. When the product is automatically supplying the water, the power indicator will flash white light. 3. The device will automatically add water to the water tank of the housing under working condition,while it will automatically stop working when the water runs out;
4. Under working condition, the mist will be paused and the power indicator will light red when you lift up the water tank. But it will mist normally and return to the previous working state when you put it back. MAINTENANCE Turn off the power of the device, unplug the power cord and then open the cover,pour out the remaining water in the water tank and the housing. Clean the product and the water tank with a clean cloth (recommended to clean every three days,and should clean out and storage it when do not use it.) 1. Please do not to rinse the device with water to prevent the water from damaging the machine. 2. Note that the magnet surface of the water valve at the bottom of the water tank should be kept clean,and avoid adsorbing foreign object. Otherwise, the machine may not work properly. 1. DO NOT put or use where your children and pet cantouch. 2. DO NOT pull the plug when your hands are wet. 3. DO NOT block off the air inlet and air outlet. 4. DO NOT let it work if no water in the water tank.Please pull the plug when not in use. If abnormality happens when using, DO NOT dismantleand repair by yourself. Please 5. unplug the power andcontact with local manufactu If any abnormality happens during use, please stop using immediately and refer to the following
"FAQ"for preliminary checking.It is not limited to the following questions, if problems remain or other problems arise, please contact the after sales service or local dealer for further assistance. In order to ensure your benefit, please do not disassemble the machine by yourself except professional technicians, so as not to cause unnecessary loss. Troubles Countermeasures Please check whether the power is connected, if not , please plug in the power supply. The device does not work after starting Check that the power line matches the product. Make sure the water in the humidifier is adequate. Add some water if the water is not enough. Please make sure the water in the container is adequate. The device doesn't have mist or mist Abnormally. Please clean the mist chip if it is contaminated. Please make sure there is no dislocation of covers. Otherwise the mist can not be transmitted to the mist outlet. ATTENTION 1.Clean tap water or pure water in normal temperature is available for this product. 2.Place the product in a horizontal place before using. 3.Pour out the water after using, otherwise it will cause trouble and bacteria. 4.Unplug if the machine is not use for a long time. 5. The machine will produce mist when working, so please stay away from valuable goods or appliances. 6. DO NOT operate if no water to avoid machine failure. 7. DO NOT directly add water to the water tank of housing ,in particular, Do NOT add water from the air outlet. 08 FCC warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 10