FCC ID: 2A5OF-TF142 pop-up power strip

POPUPRELOCATABLEPOWERTAPS Specification Ratedpower:15A110125VAC Max1,875W50/60Hz USBOutput:5V4.2A WirelessCharger:5V5W Caution KEEPCHILDRENAWAY.TOREDUCETHERISKOFELECTRICSHOCK,USEINDOORSONLY.RISKOFELECTRICSHOCK,DONOTPLUGINTOANOTHER RELOCATABLEPOWERTAPORANEXTENSIONCORD.USEINDRYLOCATIONONLY. HowtoUse 1Pressonthetopoftheproductbyhand,thesocketwillriseupward.2WhenthedeviceisconnectedtoACoutlet,presstheredswitch 3USBportscanbeusedtochargemobilephone,tablet,cameraetc.4Turntheredswitchto0,allACoutletswillbedisconnectedfromthe InstallationInstruction 1Requiredinstallationspaceisnotlessthen50cmasshowninfig5. 2Useanelectricdrillwiththedrilldiameterof100105mm.(fig1). 3Drillathroughholeonthedeskwhereyouusethispowersocket.(fig2). 4Slidethedevicethroughthedrillinghole(Fig3). 5Putonthenutandfastenthepowersockettothetable(Fig4).6Readyforuse.(fig5).Pressonthetoptoraiseorpackupthedevice. powersupply. Figure 1Figure 2 Figure 3Figure 4Figure 5 FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:

(1) Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,including interferencethatmaycauseundesiredoperation. Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

ZHONGSHAN JITONGLONG PLASTIC & HARDWARE CO., LTD. Add: 102-302 Block 2, No.12 SANZHOU Industrial Avenue 2nd Lane,YAGANG, SANXIANG Town, Zhongshan, China Date: 2022/3/17 FCC ID: 2A5OF-TF142 Dear Sir/Madam, We, ZHONGSHAN JITONGLONG PLASTIC & HARDWARE CO., LTD. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:

Product name: pop-up power strip Model no.: TF14231201F15, TF14231101F15, TF14241201F15C, TF14241101F15C Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Xusheng Ouyang/General manager ZHONGSHAN JITONGLONG PLASTIC & HARDWARE CO., LTD. 102-302 Block 2, No.12 SANZHOU Industrial Avenue 2nd Lane,YAGANG, SANXIANG Town, Zhongshan, China 86760-86699867-8013 156509688@qq.com

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2022/3/17>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2A5OF-TF142 Model name TF14231201F15 For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Address:

Phone:

Fax:

E-Mail:

Name/Title Xusheng Ouyang/General manager Company:

ZHONGSHAN JITONGLONG PLASTIC & HARDWARE CO., LTD. 102-302 Block 2, No.12 SANZHOU Lane,YAGANG, SANXIANG Town, Zhongshan, China 86760-86699867-8013 Industrial Avenue 2nd 156509688@qq.com

ZHONGSHAN JITONGLONG PLASTIC & HARDWARE CO., LTD. 102-302 Block 2, No.12 SANZHOU Industrial Avenue 2nd Lane,YAGANG, SANXIANG Town, Zhongshan, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

2022/3/17 We, ZHONGSHAN JITONGLONG PLASTIC & HARDWARE CO., LTD. the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2A5OF-TF142 including the signing of all documents related to these matters. effect as acts of our own. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Xusheng Ouyang/General manager ZHONGSHAN JITONGLONG PLASTIC & HARDWARE CO., LTD. 102-302 Block 2, No.12 SANZHOU Industrial Avenue 2nd Lane,YAGANG, SANXIANG Town, Zhongshan, China 86760-86699867-8013 156509688@qq.com